From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/phy/aquantia_hwmon.c | 250 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 drivers/net/phy/aquantia_hwmon.c (limited to 'drivers/net/phy/aquantia_hwmon.c') diff --git a/drivers/net/phy/aquantia_hwmon.c b/drivers/net/phy/aquantia_hwmon.c new file mode 100644 index 000000000..19c4c280a --- /dev/null +++ b/drivers/net/phy/aquantia_hwmon.c @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0 +/* HWMON driver for Aquantia PHY + * + * Author: Nikita Yushchenko + * Author: Andrew Lunn + * Author: Heiner Kallweit + */ + +#include +#include +#include +#include + +#include "aquantia.h" + +/* Vendor specific 1, MDIO_MMD_VEND2 */ +#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL 0xc421 +#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL 0xc422 +#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN 0xc423 +#define VEND1_THERMAL_PROV_LOW_TEMP_WARN 0xc424 +#define VEND1_THERMAL_STAT1 0xc820 +#define VEND1_THERMAL_STAT2 0xc821 +#define VEND1_THERMAL_STAT2_VALID BIT(0) +#define VEND1_GENERAL_STAT1 0xc830 +#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL BIT(14) +#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL BIT(13) +#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN BIT(12) +#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN BIT(11) + +#if IS_REACHABLE(CONFIG_HWMON) + +static umode_t aqr_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_min_alarm: + case hwmon_temp_max_alarm: + case hwmon_temp_lcrit_alarm: + case hwmon_temp_crit_alarm: + return 0444; + case hwmon_temp_min: + case hwmon_temp_max: + case hwmon_temp_lcrit: + case hwmon_temp_crit: + return 0644; + default: + return 0; + } +} + +static int aqr_hwmon_get(struct phy_device *phydev, int reg, long *value) +{ + int temp = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg); + + if (temp < 0) + return temp; + + /* 16 bit value is 2's complement with LSB = 1/256th degree Celsius */ + *value = (s16)temp * 1000 / 256; + + return 0; +} + +static int aqr_hwmon_set(struct phy_device *phydev, int reg, long value) +{ + int temp; + + if (value >= 128000 || value < -128000) + return -ERANGE; + + temp = value * 256 / 1000; + + /* temp is in s16 range and we're interested in lower 16 bits only */ + return phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, (u16)temp); +} + +static int aqr_hwmon_test_bit(struct phy_device *phydev, int reg, int bit) +{ + int val = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg); + + if (val < 0) + return val; + + return !!(val & bit); +} + +static int aqr_hwmon_status1(struct phy_device *phydev, int bit, long *value) +{ + int val = aqr_hwmon_test_bit(phydev, VEND1_GENERAL_STAT1, bit); + + if (val < 0) + return val; + + *value = val; + + return 0; +} + +static int aqr_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *value) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + int reg; + + if (type != hwmon_temp) + return -EOPNOTSUPP; + + switch (attr) { + case hwmon_temp_input: + reg = aqr_hwmon_test_bit(phydev, VEND1_THERMAL_STAT2, + VEND1_THERMAL_STAT2_VALID); + if (reg < 0) + return reg; + if (!reg) + return -EBUSY; + + return aqr_hwmon_get(phydev, VEND1_THERMAL_STAT1, value); + + case hwmon_temp_lcrit: + return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL, + value); + case hwmon_temp_min: + return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN, + value); + case hwmon_temp_max: + return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN, + value); + case hwmon_temp_crit: + return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL, + value); + case hwmon_temp_lcrit_alarm: + return aqr_hwmon_status1(phydev, + VEND1_GENERAL_STAT1_LOW_TEMP_FAIL, + value); + case hwmon_temp_min_alarm: + return aqr_hwmon_status1(phydev, + VEND1_GENERAL_STAT1_LOW_TEMP_WARN, + value); + case hwmon_temp_max_alarm: + return aqr_hwmon_status1(phydev, + VEND1_GENERAL_STAT1_HIGH_TEMP_WARN, + value); + case hwmon_temp_crit_alarm: + return aqr_hwmon_status1(phydev, + VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL, + value); + default: + return -EOPNOTSUPP; + } +} + +static int aqr_hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long value) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + + if (type != hwmon_temp) + return -EOPNOTSUPP; + + switch (attr) { + case hwmon_temp_lcrit: + return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL, + value); + case hwmon_temp_min: + return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN, + value); + case hwmon_temp_max: + return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN, + value); + case hwmon_temp_crit: + return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL, + value); + default: + return -EOPNOTSUPP; + } +} + +static const struct hwmon_ops aqr_hwmon_ops = { + .is_visible = aqr_hwmon_is_visible, + .read = aqr_hwmon_read, + .write = aqr_hwmon_write, +}; + +static u32 aqr_hwmon_chip_config[] = { + HWMON_C_REGISTER_TZ, + 0, +}; + +static const struct hwmon_channel_info aqr_hwmon_chip = { + .type = hwmon_chip, + .config = aqr_hwmon_chip_config, +}; + +static u32 aqr_hwmon_temp_config[] = { + HWMON_T_INPUT | + HWMON_T_MAX | HWMON_T_MIN | + HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM | + HWMON_T_CRIT | HWMON_T_LCRIT | + HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM, + 0, +}; + +static const struct hwmon_channel_info aqr_hwmon_temp = { + .type = hwmon_temp, + .config = aqr_hwmon_temp_config, +}; + +static const struct hwmon_channel_info *aqr_hwmon_info[] = { + &aqr_hwmon_chip, + &aqr_hwmon_temp, + NULL, +}; + +static const struct hwmon_chip_info aqr_hwmon_chip_info = { + .ops = &aqr_hwmon_ops, + .info = aqr_hwmon_info, +}; + +int aqr_hwmon_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct device *hwmon_dev; + char *hwmon_name; + int i, j; + + hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL); + if (!hwmon_name) + return -ENOMEM; + + for (i = j = 0; hwmon_name[i]; i++) { + if (isalnum(hwmon_name[i])) { + if (i != j) + hwmon_name[j] = hwmon_name[i]; + j++; + } + } + hwmon_name[j] = '\0'; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name, + phydev, &aqr_hwmon_chip_info, NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +#endif -- cgit v1.2.3