From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/phy/dp83td510.c | 258 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 258 insertions(+) create mode 100644 drivers/net/phy/dp83td510.c (limited to 'drivers/net/phy/dp83td510.c') diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c new file mode 100644 index 000000000..3cd9a77f9 --- /dev/null +++ b/drivers/net/phy/dp83td510.c @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Driver for the Texas Instruments DP83TD510 PHY + * Copyright (c) 2022 Pengutronix, Oleksij Rempel + */ + +#include +#include +#include +#include + +#define DP83TD510E_PHY_ID 0x20000181 + +/* MDIO_MMD_VEND2 registers */ +#define DP83TD510E_PHY_STS 0x10 +#define DP83TD510E_STS_MII_INT BIT(7) +#define DP83TD510E_LINK_STATUS BIT(0) + +#define DP83TD510E_GEN_CFG 0x11 +#define DP83TD510E_GENCFG_INT_POLARITY BIT(3) +#define DP83TD510E_GENCFG_INT_EN BIT(1) +#define DP83TD510E_GENCFG_INT_OE BIT(0) + +#define DP83TD510E_INTERRUPT_REG_1 0x12 +#define DP83TD510E_INT1_LINK BIT(13) +#define DP83TD510E_INT1_LINK_EN BIT(5) + +#define DP83TD510E_AN_STAT_1 0x60c +#define DP83TD510E_MASTER_SLAVE_RESOL_FAIL BIT(15) + +#define DP83TD510E_MSE_DETECT 0xa85 + +#define DP83TD510_SQI_MAX 7 + +/* Register values are converted to SNR(dB) as suggested by + * "Application Report - DP83TD510E Cable Diagnostics Toolkit": + * SNR(dB) = -10 * log10 (VAL/2^17) - 1.76 dB. + * SQI ranges are implemented according to "OPEN ALLIANCE - Advanced diagnostic + * features for 100BASE-T1 automotive Ethernet PHYs" + */ +static const u16 dp83td510_mse_sqi_map[] = { + 0x0569, /* < 18dB */ + 0x044c, /* 18dB =< SNR < 19dB */ + 0x0369, /* 19dB =< SNR < 20dB */ + 0x02b6, /* 20dB =< SNR < 21dB */ + 0x0227, /* 21dB =< SNR < 22dB */ + 0x01b6, /* 22dB =< SNR < 23dB */ + 0x015b, /* 23dB =< SNR < 24dB */ + 0x0000 /* 24dB =< SNR */ +}; + +static int dp83td510_config_intr(struct phy_device *phydev) +{ + int ret; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + /* Clear any pending interrupts */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, + 0x0); + if (ret) + return ret; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_INTERRUPT_REG_1, + DP83TD510E_INT1_LINK_EN); + if (ret) + return ret; + + ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_GEN_CFG, + DP83TD510E_GENCFG_INT_POLARITY | + DP83TD510E_GENCFG_INT_EN | + DP83TD510E_GENCFG_INT_OE); + } else { + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_INTERRUPT_REG_1, 0x0); + if (ret) + return ret; + + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_GEN_CFG, + DP83TD510E_GENCFG_INT_EN); + if (ret) + return ret; + + /* Clear any pending interrupts */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, + 0x0); + } + + return ret; +} + +static irqreturn_t dp83td510_handle_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS); + if (ret < 0) { + phy_error(phydev); + return IRQ_NONE; + } else if (!(ret & DP83TD510E_STS_MII_INT)) { + return IRQ_NONE; + } + + /* Read the current enabled interrupts */ + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1); + if (ret < 0) { + phy_error(phydev); + return IRQ_NONE; + } else if (!(ret & DP83TD510E_INT1_LINK_EN) || + !(ret & DP83TD510E_INT1_LINK)) { + return IRQ_NONE; + } + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int dp83td510_read_status(struct phy_device *phydev) +{ + u16 phy_sts; + int ret; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + linkmode_zero(phydev->lp_advertising); + + phy_sts = phy_read(phydev, DP83TD510E_PHY_STS); + + phydev->link = !!(phy_sts & DP83TD510E_LINK_STATUS); + if (phydev->link) { + /* This PHY supports only one link mode: 10BaseT1L_Full */ + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_10; + + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = genphy_c45_read_lpa(phydev); + if (ret) + return ret; + + phy_resolve_aneg_linkmode(phydev); + } + } + + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = genphy_c45_baset1_read_status(phydev); + if (ret < 0) + return ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, + DP83TD510E_AN_STAT_1); + if (ret < 0) + return ret; + + if (ret & DP83TD510E_MASTER_SLAVE_RESOL_FAIL) + phydev->master_slave_state = MASTER_SLAVE_STATE_ERR; + } else { + return genphy_c45_pma_baset1_read_master_slave(phydev); + } + + return 0; +} + +static int dp83td510_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + int ret; + + ret = genphy_c45_pma_baset1_setup_master_slave(phydev); + if (ret < 0) + return ret; + + if (phydev->autoneg == AUTONEG_DISABLE) + return genphy_c45_an_disable_aneg(phydev); + + ret = genphy_c45_an_config_aneg(phydev); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + return genphy_c45_check_and_restart_aneg(phydev, changed); +} + +static int dp83td510_get_sqi(struct phy_device *phydev) +{ + int sqi, ret; + u16 mse_val; + + if (!phydev->link) + return 0; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_MSE_DETECT); + if (ret < 0) + return ret; + + mse_val = 0xFFFF & ret; + for (sqi = 0; sqi < ARRAY_SIZE(dp83td510_mse_sqi_map); sqi++) { + if (mse_val >= dp83td510_mse_sqi_map[sqi]) + return sqi; + } + + return -EINVAL; +} + +static int dp83td510_get_sqi_max(struct phy_device *phydev) +{ + return DP83TD510_SQI_MAX; +} + +static int dp83td510_get_features(struct phy_device *phydev) +{ + /* This PHY can't respond on MDIO bus if no RMII clock is enabled. + * In case RMII mode is used (most meaningful mode for this PHY) and + * the PHY do not have own XTAL, and CLK providing MAC is not probed, + * we won't be able to read all needed ability registers. + * So provide it manually. + */ + + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, + phydev->supported); + + return 0; +} + +static struct phy_driver dp83td510_driver[] = { +{ + PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID), + .name = "TI DP83TD510E", + + .config_aneg = dp83td510_config_aneg, + .read_status = dp83td510_read_status, + .get_features = dp83td510_get_features, + .config_intr = dp83td510_config_intr, + .handle_interrupt = dp83td510_handle_interrupt, + .get_sqi = dp83td510_get_sqi, + .get_sqi_max = dp83td510_get_sqi_max, + + .suspend = genphy_suspend, + .resume = genphy_resume, +} }; +module_phy_driver(dp83td510_driver); + +static struct mdio_device_id __maybe_unused dp83td510_tbl[] = { + { PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(mdio, dp83td510_tbl); + +MODULE_DESCRIPTION("Texas Instruments DP83TD510E PHY driver"); +MODULE_AUTHOR("Oleksij Rempel "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3