From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/phy/icplus.c | 634 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 634 insertions(+) create mode 100644 drivers/net/phy/icplus.c (limited to 'drivers/net/phy/icplus.c') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c new file mode 100644 index 000000000..a00a66745 --- /dev/null +++ b/drivers/net/phy/icplus.c @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for ICPlus PHYs + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers"); +MODULE_AUTHOR("Michael Barkowski"); +MODULE_LICENSE("GPL"); + +/* IP101A/G - IP1001 */ +#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ +#define IP1001_RXPHASE_SEL BIT(0) /* Add delay on RX_CLK */ +#define IP1001_TXPHASE_SEL BIT(1) /* Add delay on TX_CLK */ +#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ +#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ +#define IP101A_G_APS_ON BIT(1) /* IP101A/G APS Mode bit */ +#define IP101A_G_AUTO_MDIX_DIS BIT(11) +#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ +#define IP101A_G_IRQ_PIN_USED BIT(15) /* INTR pin used */ +#define IP101A_G_IRQ_ALL_MASK BIT(11) /* IRQ's inactive */ +#define IP101A_G_IRQ_SPEED_CHANGE BIT(2) +#define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1) +#define IP101A_G_IRQ_LINK_CHANGE BIT(0) +#define IP101A_G_PHY_STATUS 18 +#define IP101A_G_MDIX BIT(9) +#define IP101A_G_PHY_SPEC_CTRL 30 +#define IP101A_G_FORCE_MDIX BIT(3) + +#define IP101G_PAGE_CONTROL 0x14 +#define IP101G_PAGE_CONTROL_MASK GENMASK(4, 0) +#define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d +#define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2) + +#define IP101G_DEFAULT_PAGE 16 + +#define IP101G_P1_CNT_CTRL 17 +#define CNT_CTRL_RX_EN BIT(13) +#define IP101G_P8_CNT_CTRL 17 +#define CNT_CTRL_RDCLR_EN BIT(15) +#define IP101G_CNT_REG 18 + +#define IP175C_PHY_ID 0x02430d80 +#define IP1001_PHY_ID 0x02430d90 +#define IP101A_PHY_ID 0x02430c54 + +/* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin + * (pin number 21). The hardware default is RXER (receive error) mode. But it + * can be configured to interrupt mode manually. + */ +enum ip101gr_sel_intr32 { + IP101GR_SEL_INTR32_KEEP, + IP101GR_SEL_INTR32_INTR, + IP101GR_SEL_INTR32_RXER, +}; + +struct ip101g_hw_stat { + const char *name; + int page; +}; + +static struct ip101g_hw_stat ip101g_hw_stats[] = { + { "phy_crc_errors", 1 }, + { "phy_symbol_errors", 11, }, +}; + +struct ip101a_g_phy_priv { + enum ip101gr_sel_intr32 sel_intr32; + u64 stats[ARRAY_SIZE(ip101g_hw_stats)]; +}; + +static int ip175c_config_init(struct phy_device *phydev) +{ + int err, i; + static int full_reset_performed; + + if (full_reset_performed == 0) { + + /* master reset */ + err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c); + if (err < 0) + return err; + + /* ensure no bus delays overlap reset period */ + err = mdiobus_read(phydev->mdio.bus, 30, 0); + + /* data sheet specifies reset period is 2 msec */ + mdelay(2); + + /* enable IP175C mode */ + err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c); + if (err < 0) + return err; + + /* Set MII0 speed and duplex (in PHY mode) */ + err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420); + if (err < 0) + return err; + + /* reset switch ports */ + for (i = 0; i < 5; i++) { + err = mdiobus_write(phydev->mdio.bus, i, + MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + } + + for (i = 0; i < 5; i++) + err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR); + + mdelay(2); + + full_reset_performed = 1; + } + + if (phydev->mdio.addr != 4) { + phydev->state = PHY_RUNNING; + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + phydev->link = 1; + netif_carrier_on(phydev->attached_dev); + } + + return 0; +} + +static int ip1001_config_init(struct phy_device *phydev) +{ + int c; + + /* Enable Auto Power Saving mode */ + c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2); + if (c < 0) + return c; + c |= IP1001_APS_ON; + c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c); + if (c < 0) + return c; + + if (phy_interface_is_rgmii(phydev)) { + + c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + if (c < 0) + return c; + + c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL); + else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) + c |= IP1001_RXPHASE_SEL; + else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + c |= IP1001_TXPHASE_SEL; + + c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); + if (c < 0) + return c; + } + + return 0; +} + +static int ip175c_read_status(struct phy_device *phydev) +{ + if (phydev->mdio.addr == 4) /* WAN port */ + genphy_read_status(phydev); + else + /* Don't need to read status for switch ports */ + phydev->irq = PHY_MAC_INTERRUPT; + + return 0; +} + +static int ip175c_config_aneg(struct phy_device *phydev) +{ + if (phydev->mdio.addr == 4) /* WAN port */ + genphy_config_aneg(phydev); + + return 0; +} + +static int ip101a_g_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct ip101a_g_phy_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Both functions (RX error and interrupt status) are sharing the same + * pin on the 32-pin IP101GR, so this is an exclusive choice. + */ + if (device_property_read_bool(dev, "icplus,select-rx-error") && + device_property_read_bool(dev, "icplus,select-interrupt")) { + dev_err(dev, + "RXER and INTR mode cannot be selected together\n"); + return -EINVAL; + } + + if (device_property_read_bool(dev, "icplus,select-rx-error")) + priv->sel_intr32 = IP101GR_SEL_INTR32_RXER; + else if (device_property_read_bool(dev, "icplus,select-interrupt")) + priv->sel_intr32 = IP101GR_SEL_INTR32_INTR; + else + priv->sel_intr32 = IP101GR_SEL_INTR32_KEEP; + + phydev->priv = priv; + + return 0; +} + +static int ip101a_g_config_intr_pin(struct phy_device *phydev) +{ + struct ip101a_g_phy_priv *priv = phydev->priv; + int oldpage, err = 0; + + oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); + if (oldpage < 0) + goto out; + + /* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */ + switch (priv->sel_intr32) { + case IP101GR_SEL_INTR32_RXER: + err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0); + if (err < 0) + goto out; + break; + + case IP101GR_SEL_INTR32_INTR: + err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32); + if (err < 0) + goto out; + break; + + default: + /* Don't touch IP101G_DIGITAL_IO_SPEC_CTRL because it's not + * documented on IP101A and it's not clear whether this would + * cause problems. + * For the 32-pin IP101GR we simply keep the SEL_INTR32 + * configuration as set by the bootloader when not configured + * to one of the special functions. + */ + break; + } + +out: + return phy_restore_page(phydev, oldpage, err); +} + +static int ip101a_config_init(struct phy_device *phydev) +{ + int ret; + + /* Enable Auto Power Saving mode */ + ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON); + if (ret) + return ret; + + return ip101a_g_config_intr_pin(phydev); +} + +static int ip101g_config_init(struct phy_device *phydev) +{ + int ret; + + /* Enable the PHY counters */ + ret = phy_modify_paged(phydev, 1, IP101G_P1_CNT_CTRL, + CNT_CTRL_RX_EN, CNT_CTRL_RX_EN); + if (ret) + return ret; + + /* Clear error counters on read */ + ret = phy_modify_paged(phydev, 8, IP101G_P8_CNT_CTRL, + CNT_CTRL_RDCLR_EN, CNT_CTRL_RDCLR_EN); + if (ret) + return ret; + + return ip101a_g_config_intr_pin(phydev); +} + +static int ip101a_g_read_status(struct phy_device *phydev) +{ + int oldpage, ret, stat1, stat2; + + ret = genphy_read_status(phydev); + if (ret) + return ret; + + oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); + if (oldpage < 0) + goto out; + + ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + if (ret < 0) + goto out; + stat1 = ret; + + ret = __phy_read(phydev, IP101A_G_PHY_SPEC_CTRL); + if (ret < 0) + goto out; + stat2 = ret; + + if (stat1 & IP101A_G_AUTO_MDIX_DIS) { + if (stat2 & IP101A_G_FORCE_MDIX) + phydev->mdix_ctrl = ETH_TP_MDI_X; + else + phydev->mdix_ctrl = ETH_TP_MDI; + } else { + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + } + + if (stat2 & IP101A_G_MDIX) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + + ret = 0; + +out: + return phy_restore_page(phydev, oldpage, ret); +} + +static int ip101a_g_config_mdix(struct phy_device *phydev) +{ + u16 ctrl = 0, ctrl2 = 0; + int oldpage; + int ret = 0; + + switch (phydev->mdix_ctrl) { + case ETH_TP_MDI: + ctrl = IP101A_G_AUTO_MDIX_DIS; + break; + case ETH_TP_MDI_X: + ctrl = IP101A_G_AUTO_MDIX_DIS; + ctrl2 = IP101A_G_FORCE_MDIX; + break; + case ETH_TP_MDI_AUTO: + break; + default: + return 0; + } + + oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE); + if (oldpage < 0) + goto out; + + ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS, + IP101A_G_AUTO_MDIX_DIS, ctrl); + if (ret) + goto out; + + ret = __phy_modify(phydev, IP101A_G_PHY_SPEC_CTRL, + IP101A_G_FORCE_MDIX, ctrl2); + +out: + return phy_restore_page(phydev, oldpage, ret); +} + +static int ip101a_g_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = ip101a_g_config_mdix(phydev); + if (ret) + return ret; + + return genphy_config_aneg(phydev); +} + +static int ip101a_g_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS); + if (err < 0) + return err; + + return 0; +} + +static int ip101a_g_config_intr(struct phy_device *phydev) +{ + u16 val; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = ip101a_g_ack_interrupt(phydev); + if (err) + return err; + + /* INTR pin used: Speed/link/duplex will cause an interrupt */ + val = IP101A_G_IRQ_PIN_USED; + err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS, val); + } else { + val = IP101A_G_IRQ_ALL_MASK; + err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS, val); + if (err) + return err; + + err = ip101a_g_ack_interrupt(phydev); + } + + return err; +} + +static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read_paged(phydev, IP101G_DEFAULT_PAGE, + IP101A_G_IRQ_CONF_STATUS); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & (IP101A_G_IRQ_SPEED_CHANGE | + IP101A_G_IRQ_DUPLEX_CHANGE | + IP101A_G_IRQ_LINK_CHANGE))) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +/* The IP101A doesn't really have a page register. We just pretend to have one + * so we can use the paged versions of the callbacks of the IP101G. + */ +static int ip101a_read_page(struct phy_device *phydev) +{ + return IP101G_DEFAULT_PAGE; +} + +static int ip101a_write_page(struct phy_device *phydev, int page) +{ + WARN_ONCE(page != IP101G_DEFAULT_PAGE, "wrong page selected\n"); + + return 0; +} + +static int ip101g_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, IP101G_PAGE_CONTROL); +} + +static int ip101g_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, IP101G_PAGE_CONTROL, page); +} + +static int ip101a_g_has_page_register(struct phy_device *phydev) +{ + int oldval, val, ret; + + oldval = phy_read(phydev, IP101G_PAGE_CONTROL); + if (oldval < 0) + return oldval; + + ret = phy_write(phydev, IP101G_PAGE_CONTROL, 0xffff); + if (ret) + return ret; + + val = phy_read(phydev, IP101G_PAGE_CONTROL); + if (val < 0) + return val; + + ret = phy_write(phydev, IP101G_PAGE_CONTROL, oldval); + if (ret) + return ret; + + return val == IP101G_PAGE_CONTROL_MASK; +} + +static int ip101a_g_match_phy_device(struct phy_device *phydev, bool ip101a) +{ + int ret; + + if (phydev->phy_id != IP101A_PHY_ID) + return 0; + + /* The IP101A and the IP101G share the same PHY identifier.The IP101G + * seems to be a successor of the IP101A and implements more functions. + * Amongst other things there is a page select register, which is not + * available on the IP101A. Use this to distinguish these two. + */ + ret = ip101a_g_has_page_register(phydev); + if (ret < 0) + return ret; + + return ip101a == !ret; +} + +static int ip101a_match_phy_device(struct phy_device *phydev) +{ + return ip101a_g_match_phy_device(phydev, true); +} + +static int ip101g_match_phy_device(struct phy_device *phydev) +{ + return ip101a_g_match_phy_device(phydev, false); +} + +static int ip101g_get_sset_count(struct phy_device *phydev) +{ + return ARRAY_SIZE(ip101g_hw_stats); +} + +static void ip101g_get_strings(struct phy_device *phydev, u8 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++) + strscpy(data + i * ETH_GSTRING_LEN, + ip101g_hw_stats[i].name, ETH_GSTRING_LEN); +} + +static u64 ip101g_get_stat(struct phy_device *phydev, int i) +{ + struct ip101g_hw_stat stat = ip101g_hw_stats[i]; + struct ip101a_g_phy_priv *priv = phydev->priv; + int val; + u64 ret; + + val = phy_read_paged(phydev, stat.page, IP101G_CNT_REG); + if (val < 0) { + ret = U64_MAX; + } else { + priv->stats[i] += val; + ret = priv->stats[i]; + } + + return ret; +} + +static void ip101g_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++) + data[i] = ip101g_get_stat(phydev, i); +} + +static struct phy_driver icplus_driver[] = { +{ + PHY_ID_MATCH_MODEL(IP175C_PHY_ID), + .name = "ICPlus IP175C", + /* PHY_BASIC_FEATURES */ + .config_init = ip175c_config_init, + .config_aneg = ip175c_config_aneg, + .read_status = ip175c_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, +}, { + PHY_ID_MATCH_MODEL(IP1001_PHY_ID), + .name = "ICPlus IP1001", + /* PHY_GBIT_FEATURES */ + .config_init = ip1001_config_init, + .soft_reset = genphy_soft_reset, + .suspend = genphy_suspend, + .resume = genphy_resume, +}, { + .name = "ICPlus IP101A", + .match_phy_device = ip101a_match_phy_device, + .probe = ip101a_g_probe, + .read_page = ip101a_read_page, + .write_page = ip101a_write_page, + .config_intr = ip101a_g_config_intr, + .handle_interrupt = ip101a_g_handle_interrupt, + .config_init = ip101a_config_init, + .config_aneg = ip101a_g_config_aneg, + .read_status = ip101a_g_read_status, + .soft_reset = genphy_soft_reset, + .suspend = genphy_suspend, + .resume = genphy_resume, +}, { + .name = "ICPlus IP101G", + .match_phy_device = ip101g_match_phy_device, + .probe = ip101a_g_probe, + .read_page = ip101g_read_page, + .write_page = ip101g_write_page, + .config_intr = ip101a_g_config_intr, + .handle_interrupt = ip101a_g_handle_interrupt, + .config_init = ip101g_config_init, + .config_aneg = ip101a_g_config_aneg, + .read_status = ip101a_g_read_status, + .soft_reset = genphy_soft_reset, + .get_sset_count = ip101g_get_sset_count, + .get_strings = ip101g_get_strings, + .get_stats = ip101g_get_stats, + .suspend = genphy_suspend, + .resume = genphy_resume, +} }; + +module_phy_driver(icplus_driver); + +static struct mdio_device_id __maybe_unused icplus_tbl[] = { + { PHY_ID_MATCH_MODEL(IP175C_PHY_ID) }, + { PHY_ID_MATCH_MODEL(IP1001_PHY_ID) }, + { PHY_ID_MATCH_EXACT(IP101A_PHY_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, icplus_tbl); -- cgit v1.2.3