From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/phy/mdio_device.c | 228 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100644 drivers/net/phy/mdio_device.c (limited to 'drivers/net/phy/mdio_device.c') diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c new file mode 100644 index 000000000..044828d08 --- /dev/null +++ b/drivers/net/phy/mdio_device.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Framework for MDIO devices, other than PHYs. + * + * Copyright (c) 2016 Andrew Lunn + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void mdio_device_free(struct mdio_device *mdiodev) +{ + put_device(&mdiodev->dev); +} +EXPORT_SYMBOL(mdio_device_free); + +static void mdio_device_release(struct device *dev) +{ + fwnode_handle_put(dev->fwnode); + kfree(to_mdio_device(dev)); +} + +int mdio_device_bus_match(struct device *dev, struct device_driver *drv) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + + if (mdiodrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY) + return 0; + + return strcmp(mdiodev->modalias, drv->name) == 0; +} + +struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr) +{ + struct mdio_device *mdiodev; + + /* We allocate the device, and initialize the default values */ + mdiodev = kzalloc(sizeof(*mdiodev), GFP_KERNEL); + if (!mdiodev) + return ERR_PTR(-ENOMEM); + + mdiodev->dev.release = mdio_device_release; + mdiodev->dev.parent = &bus->dev; + mdiodev->dev.bus = &mdio_bus_type; + mdiodev->device_free = mdio_device_free; + mdiodev->device_remove = mdio_device_remove; + mdiodev->bus = bus; + mdiodev->addr = addr; + + dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr); + + device_initialize(&mdiodev->dev); + + return mdiodev; +} +EXPORT_SYMBOL(mdio_device_create); + +/** + * mdio_device_register - Register the mdio device on the MDIO bus + * @mdiodev: mdio_device structure to be added to the MDIO bus + */ +int mdio_device_register(struct mdio_device *mdiodev) +{ + int err; + + dev_dbg(&mdiodev->dev, "%s\n", __func__); + + err = mdiobus_register_device(mdiodev); + if (err) + return err; + + err = device_add(&mdiodev->dev); + if (err) { + pr_err("MDIO %d failed to add\n", mdiodev->addr); + goto out; + } + + return 0; + + out: + mdiobus_unregister_device(mdiodev); + return err; +} +EXPORT_SYMBOL(mdio_device_register); + +/** + * mdio_device_remove - Remove a previously registered mdio device from the + * MDIO bus + * @mdiodev: mdio_device structure to remove + * + * This doesn't free the mdio_device itself, it merely reverses the effects + * of mdio_device_register(). Use mdio_device_free() to free the device + * after calling this function. + */ +void mdio_device_remove(struct mdio_device *mdiodev) +{ + device_del(&mdiodev->dev); + mdiobus_unregister_device(mdiodev); +} +EXPORT_SYMBOL(mdio_device_remove); + +void mdio_device_reset(struct mdio_device *mdiodev, int value) +{ + unsigned int d; + + if (!mdiodev->reset_gpio && !mdiodev->reset_ctrl) + return; + + if (mdiodev->reset_gpio) + gpiod_set_value_cansleep(mdiodev->reset_gpio, value); + + if (mdiodev->reset_ctrl) { + if (value) + reset_control_assert(mdiodev->reset_ctrl); + else + reset_control_deassert(mdiodev->reset_ctrl); + } + + d = value ? mdiodev->reset_assert_delay : mdiodev->reset_deassert_delay; + if (d) + fsleep(d); +} +EXPORT_SYMBOL(mdio_device_reset); + +/** + * mdio_probe - probe an MDIO device + * @dev: device to probe + * + * Description: Take care of setting up the mdio_device structure + * and calling the driver to probe the device. + */ +static int mdio_probe(struct device *dev) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct device_driver *drv = mdiodev->dev.driver; + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + int err = 0; + + /* Deassert the reset signal */ + mdio_device_reset(mdiodev, 0); + + if (mdiodrv->probe) { + err = mdiodrv->probe(mdiodev); + if (err) { + /* Assert the reset signal */ + mdio_device_reset(mdiodev, 1); + } + } + + return err; +} + +static int mdio_remove(struct device *dev) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct device_driver *drv = mdiodev->dev.driver; + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + + if (mdiodrv->remove) + mdiodrv->remove(mdiodev); + + /* Assert the reset signal */ + mdio_device_reset(mdiodev, 1); + + return 0; +} + +static void mdio_shutdown(struct device *dev) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct device_driver *drv = mdiodev->dev.driver; + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + + if (mdiodrv->shutdown) + mdiodrv->shutdown(mdiodev); +} + +/** + * mdio_driver_register - register an mdio_driver with the MDIO layer + * @drv: new mdio_driver to register + */ +int mdio_driver_register(struct mdio_driver *drv) +{ + struct mdio_driver_common *mdiodrv = &drv->mdiodrv; + int retval; + + pr_debug("%s: %s\n", __func__, mdiodrv->driver.name); + + mdiodrv->driver.bus = &mdio_bus_type; + mdiodrv->driver.probe = mdio_probe; + mdiodrv->driver.remove = mdio_remove; + mdiodrv->driver.shutdown = mdio_shutdown; + + retval = driver_register(&mdiodrv->driver); + if (retval) { + pr_err("%s: Error %d in registering driver\n", + mdiodrv->driver.name, retval); + + return retval; + } + + return 0; +} +EXPORT_SYMBOL(mdio_driver_register); + +void mdio_driver_unregister(struct mdio_driver *drv) +{ + struct mdio_driver_common *mdiodrv = &drv->mdiodrv; + + driver_unregister(&mdiodrv->driver); +} +EXPORT_SYMBOL(mdio_driver_unregister); -- cgit v1.2.3