From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/phy/microchip.c | 384 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 384 insertions(+) create mode 100644 drivers/net/phy/microchip.c (limited to 'drivers/net/phy/microchip.c') diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c new file mode 100644 index 000000000..ccecee252 --- /dev/null +++ b/drivers/net/phy/microchip.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Microchip Technology + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_AUTHOR "WOOJUNG HUH " +#define DRIVER_DESC "Microchip LAN88XX PHY driver" + +struct lan88xx_priv { + int chip_id; + int chip_rev; + __u32 wolopts; +}; + +static int lan88xx_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS); +} + +static int lan88xx_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page); +} + +static int lan88xx_phy_config_intr(struct phy_device *phydev) +{ + int rc; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + /* unmask all source and clear them before enable */ + rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF); + rc = phy_read(phydev, LAN88XX_INT_STS); + rc = phy_write(phydev, LAN88XX_INT_MASK, + LAN88XX_INT_MASK_MDINTPIN_EN_ | + LAN88XX_INT_MASK_LINK_CHANGE_); + } else { + rc = phy_write(phydev, LAN88XX_INT_MASK, 0); + if (rc) + return rc; + + /* Ack interrupts after they have been disabled */ + rc = phy_read(phydev, LAN88XX_INT_STS); + } + + return rc < 0 ? rc : 0; +} + +static irqreturn_t lan88xx_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read(phydev, LAN88XX_INT_STS); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & LAN88XX_INT_STS_LINK_CHANGE_)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int lan88xx_suspend(struct phy_device *phydev) +{ + struct lan88xx_priv *priv = phydev->priv; + + /* do not power down PHY when WOL is enabled */ + if (!priv->wolopts) + genphy_suspend(phydev); + + return 0; +} + +static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr, + u32 data) +{ + int val, save_page, ret = 0; + u16 buf; + + /* Save current page */ + save_page = phy_save_page(phydev); + if (save_page < 0) { + phydev_warn(phydev, "Failed to get current page\n"); + goto err; + } + + /* Switch to TR page */ + lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR); + + ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA, + (data & 0xFFFF)); + if (ret < 0) { + phydev_warn(phydev, "Failed to write TR low data\n"); + goto err; + } + + ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA, + (data & 0x00FF0000) >> 16); + if (ret < 0) { + phydev_warn(phydev, "Failed to write TR high data\n"); + goto err; + } + + /* Config control bits [15:13] of register */ + buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */ + buf |= 0x8000; /* Set [15] to Packet transmit */ + + ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf); + if (ret < 0) { + phydev_warn(phydev, "Failed to write data in reg\n"); + goto err; + } + + usleep_range(1000, 2000);/* Wait for Data to be written */ + val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR); + if (!(val & 0x8000)) + phydev_warn(phydev, "TR Register[0x%X] configuration failed\n", + regaddr); +err: + return phy_restore_page(phydev, save_page, ret); +} + +static void lan88xx_config_TR_regs(struct phy_device *phydev) +{ + int err; + + /* Get access to Channel 0x1, Node 0xF , Register 0x01. + * Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf, + * MrvlTrFix1000Kp, MasterEnableTR bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0F82]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x06. + * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv, + * SSTrKp1000Mas bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x168C]\n"); + + /* Get access to Channel b'10, Node b'1111, Register 0x11. + * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh + * bits + */ + err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x17A2]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x10. + * Write 24-bit value 0xEEFFDD to register. Setting + * eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000, + * eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A0]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x13. + * Write 24-bit value 0x071448 to register. Setting + * slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A6]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x12. + * Write 24-bit value 0x13132F to register. Setting + * slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A4]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x14. + * Write 24-bit value 0x0 to register. Setting eee_3level_delay, + * eee_TrKf_freeze_delay bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x16A8]\n"); + + /* Get access to Channel b'01, Node b'1111, Register 0x34. + * Write 24-bit value 0x91B06C to register. Setting + * FastMseSearchThreshLong1000, FastMseSearchThreshShort1000, + * FastMseSearchUpdGain1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n"); + + /* Get access to Channel b'01, Node b'1111, Register 0x3E. + * Write 24-bit value 0xC0A028 to register. Setting + * FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000, + * FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n"); + + /* Get access to Channel b'01, Node b'1111, Register 0x35. + * Write 24-bit value 0x041600 to register. Setting + * FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000, + * FastMsePhChangeDelay1000 bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n"); + + /* Get access to Channel b'10, Node b'1101, Register 0x03. + * Write 24-bit value 0x000004 to register. Setting TrFreeze bits. + */ + err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004); + if (err < 0) + phydev_warn(phydev, "Failed to Set Register[0x1686]\n"); +} + +static int lan88xx_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct lan88xx_priv *priv; + u32 led_modes[4]; + int len; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->wolopts = 0; + + len = of_property_read_variable_u32_array(dev->of_node, + "microchip,led-modes", + led_modes, + 0, + ARRAY_SIZE(led_modes)); + if (len >= 0) { + u32 reg = 0; + int i; + + for (i = 0; i < len; i++) { + if (led_modes[i] > 15) + return -EINVAL; + reg |= led_modes[i] << (i * 4); + } + for (; i < ARRAY_SIZE(led_modes); i++) + reg |= LAN78XX_FORCE_LED_OFF << (i * 4); + (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg); + } else if (len == -EOVERFLOW) { + return -EINVAL; + } + + /* these values can be used to identify internal PHY */ + priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID); + priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV); + + phydev->priv = priv; + + return 0; +} + +static void lan88xx_remove(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct lan88xx_priv *priv = phydev->priv; + + if (priv) + devm_kfree(dev, priv); +} + +static int lan88xx_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + struct lan88xx_priv *priv = phydev->priv; + + priv->wolopts = wol->wolopts; + + return 0; +} + +static void lan88xx_set_mdix(struct phy_device *phydev) +{ + int buf; + int val; + + switch (phydev->mdix_ctrl) { + case ETH_TP_MDI: + val = LAN88XX_EXT_MODE_CTRL_MDI_; + break; + case ETH_TP_MDI_X: + val = LAN88XX_EXT_MODE_CTRL_MDI_X_; + break; + case ETH_TP_MDI_AUTO: + val = LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_; + break; + default: + return; + } + + phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_1); + buf = phy_read(phydev, LAN88XX_EXT_MODE_CTRL); + buf &= ~LAN88XX_EXT_MODE_CTRL_MDIX_MASK_; + buf |= val; + phy_write(phydev, LAN88XX_EXT_MODE_CTRL, buf); + phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0); +} + +static int lan88xx_config_init(struct phy_device *phydev) +{ + int val; + + /*Zerodetect delay enable */ + val = phy_read_mmd(phydev, MDIO_MMD_PCS, + PHY_ARDENNES_MMD_DEV_3_PHY_CFG); + val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_; + + phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG, + val); + + /* Config DSP registers */ + lan88xx_config_TR_regs(phydev); + + return 0; +} + +static int lan88xx_config_aneg(struct phy_device *phydev) +{ + lan88xx_set_mdix(phydev); + + return genphy_config_aneg(phydev); +} + +static struct phy_driver microchip_phy_driver[] = { +{ + .phy_id = 0x0007c132, + /* This mask (0xfffffff2) is to differentiate from + * LAN8742 (phy_id 0x0007c130 and 0x0007c131) + * and allows future phy_id revisions. + */ + .phy_id_mask = 0xfffffff2, + .name = "Microchip LAN88xx", + + /* PHY_GBIT_FEATURES */ + + .probe = lan88xx_probe, + .remove = lan88xx_remove, + + .config_init = lan88xx_config_init, + .config_aneg = lan88xx_config_aneg, + + .config_intr = lan88xx_phy_config_intr, + .handle_interrupt = lan88xx_handle_interrupt, + + .suspend = lan88xx_suspend, + .resume = genphy_resume, + .set_wol = lan88xx_set_wol, + .read_page = lan88xx_read_page, + .write_page = lan88xx_write_page, +} }; + +module_phy_driver(microchip_phy_driver); + +static struct mdio_device_id __maybe_unused microchip_tbl[] = { + { 0x0007c132, 0xfffffff2 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, microchip_tbl); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3