From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/phy/spi_ks8995.c | 506 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 506 insertions(+) create mode 100644 drivers/net/phy/spi_ks8995.c (limited to 'drivers/net/phy/spi_ks8995.c') diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c new file mode 100644 index 000000000..d4202d40d --- /dev/null +++ b/drivers/net/phy/spi_ks8995.c @@ -0,0 +1,506 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches + * + * Copyright (C) 2008 Gabor Juhos + * + * This file was based on: drivers/spi/at25.c + * Copyright (C) 2006 David Brownell + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRV_VERSION "0.1.1" +#define DRV_DESC "Micrel KS8995 Ethernet switch SPI driver" + +/* ------------------------------------------------------------------------ */ + +#define KS8995_REG_ID0 0x00 /* Chip ID0 */ +#define KS8995_REG_ID1 0x01 /* Chip ID1 */ + +#define KS8995_REG_GC0 0x02 /* Global Control 0 */ +#define KS8995_REG_GC1 0x03 /* Global Control 1 */ +#define KS8995_REG_GC2 0x04 /* Global Control 2 */ +#define KS8995_REG_GC3 0x05 /* Global Control 3 */ +#define KS8995_REG_GC4 0x06 /* Global Control 4 */ +#define KS8995_REG_GC5 0x07 /* Global Control 5 */ +#define KS8995_REG_GC6 0x08 /* Global Control 6 */ +#define KS8995_REG_GC7 0x09 /* Global Control 7 */ +#define KS8995_REG_GC8 0x0a /* Global Control 8 */ +#define KS8995_REG_GC9 0x0b /* Global Control 9 */ + +#define KS8995_REG_PC(p, r) ((0x10 * p) + r) /* Port Control */ +#define KS8995_REG_PS(p, r) ((0x10 * p) + r + 0xe) /* Port Status */ + +#define KS8995_REG_TPC0 0x60 /* TOS Priority Control 0 */ +#define KS8995_REG_TPC1 0x61 /* TOS Priority Control 1 */ +#define KS8995_REG_TPC2 0x62 /* TOS Priority Control 2 */ +#define KS8995_REG_TPC3 0x63 /* TOS Priority Control 3 */ +#define KS8995_REG_TPC4 0x64 /* TOS Priority Control 4 */ +#define KS8995_REG_TPC5 0x65 /* TOS Priority Control 5 */ +#define KS8995_REG_TPC6 0x66 /* TOS Priority Control 6 */ +#define KS8995_REG_TPC7 0x67 /* TOS Priority Control 7 */ + +#define KS8995_REG_MAC0 0x68 /* MAC address 0 */ +#define KS8995_REG_MAC1 0x69 /* MAC address 1 */ +#define KS8995_REG_MAC2 0x6a /* MAC address 2 */ +#define KS8995_REG_MAC3 0x6b /* MAC address 3 */ +#define KS8995_REG_MAC4 0x6c /* MAC address 4 */ +#define KS8995_REG_MAC5 0x6d /* MAC address 5 */ + +#define KS8995_REG_IAC0 0x6e /* Indirect Access Control 0 */ +#define KS8995_REG_IAC1 0x6f /* Indirect Access Control 0 */ +#define KS8995_REG_IAD7 0x70 /* Indirect Access Data 7 */ +#define KS8995_REG_IAD6 0x71 /* Indirect Access Data 6 */ +#define KS8995_REG_IAD5 0x72 /* Indirect Access Data 5 */ +#define KS8995_REG_IAD4 0x73 /* Indirect Access Data 4 */ +#define KS8995_REG_IAD3 0x74 /* Indirect Access Data 3 */ +#define KS8995_REG_IAD2 0x75 /* Indirect Access Data 2 */ +#define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */ +#define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */ + +#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */ + +#define KS8995_REGS_SIZE 0x80 +#define KSZ8864_REGS_SIZE 0x100 +#define KSZ8795_REGS_SIZE 0x100 + +#define ID1_CHIPID_M 0xf +#define ID1_CHIPID_S 4 +#define ID1_REVISION_M 0x7 +#define ID1_REVISION_S 1 +#define ID1_START_SW 1 /* start the switch */ + +#define FAMILY_KS8995 0x95 +#define FAMILY_KSZ8795 0x87 +#define CHIPID_M 0 +#define KS8995_CHIP_ID 0x00 +#define KSZ8864_CHIP_ID 0x01 +#define KSZ8795_CHIP_ID 0x09 + +#define KS8995_CMD_WRITE 0x02U +#define KS8995_CMD_READ 0x03U + +#define KS8995_RESET_DELAY 10 /* usec */ + +enum ks8995_chip_variant { + ks8995, + ksz8864, + ksz8795, + max_variant +}; + +struct ks8995_chip_params { + char *name; + int family_id; + int chip_id; + int regs_size; + int addr_width; + int addr_shift; +}; + +static const struct ks8995_chip_params ks8995_chip[] = { + [ks8995] = { + .name = "KS8995MA", + .family_id = FAMILY_KS8995, + .chip_id = KS8995_CHIP_ID, + .regs_size = KS8995_REGS_SIZE, + .addr_width = 8, + .addr_shift = 0, + }, + [ksz8864] = { + .name = "KSZ8864RMN", + .family_id = FAMILY_KS8995, + .chip_id = KSZ8864_CHIP_ID, + .regs_size = KSZ8864_REGS_SIZE, + .addr_width = 8, + .addr_shift = 0, + }, + [ksz8795] = { + .name = "KSZ8795CLX", + .family_id = FAMILY_KSZ8795, + .chip_id = KSZ8795_CHIP_ID, + .regs_size = KSZ8795_REGS_SIZE, + .addr_width = 12, + .addr_shift = 1, + }, +}; + +struct ks8995_switch { + struct spi_device *spi; + struct mutex lock; + struct gpio_desc *reset_gpio; + struct bin_attribute regs_attr; + const struct ks8995_chip_params *chip; + int revision_id; +}; + +static const struct spi_device_id ks8995_id[] = { + {"ks8995", ks8995}, + {"ksz8864", ksz8864}, + {"ksz8795", ksz8795}, + { } +}; +MODULE_DEVICE_TABLE(spi, ks8995_id); + +static const struct of_device_id ks8895_spi_of_match[] = { + { .compatible = "micrel,ks8995" }, + { .compatible = "micrel,ksz8864" }, + { .compatible = "micrel,ksz8795" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ks8895_spi_of_match); + +static inline u8 get_chip_id(u8 val) +{ + return (val >> ID1_CHIPID_S) & ID1_CHIPID_M; +} + +static inline u8 get_chip_rev(u8 val) +{ + return (val >> ID1_REVISION_S) & ID1_REVISION_M; +} + +/* create_spi_cmd - create a chip specific SPI command header + * @ks: pointer to switch instance + * @cmd: SPI command for switch + * @address: register address for command + * + * Different chip families use different bit pattern to address the switches + * registers: + * + * KS8995: 8bit command + 8bit address + * KSZ8795: 3bit command + 12bit address + 1bit TR (?) + */ +static inline __be16 create_spi_cmd(struct ks8995_switch *ks, int cmd, + unsigned address) +{ + u16 result = cmd; + + /* make room for address (incl. address shift) */ + result <<= ks->chip->addr_width + ks->chip->addr_shift; + /* add address */ + result |= address << ks->chip->addr_shift; + /* SPI protocol needs big endian */ + return cpu_to_be16(result); +} +/* ------------------------------------------------------------------------ */ +static int ks8995_read(struct ks8995_switch *ks, char *buf, + unsigned offset, size_t count) +{ + __be16 cmd; + struct spi_transfer t[2]; + struct spi_message m; + int err; + + cmd = create_spi_cmd(ks, KS8995_CMD_READ, offset); + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = count; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&ks->lock); + err = spi_sync(ks->spi, &m); + mutex_unlock(&ks->lock); + + return err ? err : count; +} + +static int ks8995_write(struct ks8995_switch *ks, char *buf, + unsigned offset, size_t count) +{ + __be16 cmd; + struct spi_transfer t[2]; + struct spi_message m; + int err; + + cmd = create_spi_cmd(ks, KS8995_CMD_WRITE, offset); + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = count; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&ks->lock); + err = spi_sync(ks->spi, &m); + mutex_unlock(&ks->lock); + + return err ? err : count; +} + +static inline int ks8995_read_reg(struct ks8995_switch *ks, u8 addr, u8 *buf) +{ + return ks8995_read(ks, buf, addr, 1) != 1; +} + +static inline int ks8995_write_reg(struct ks8995_switch *ks, u8 addr, u8 val) +{ + char buf = val; + + return ks8995_write(ks, &buf, addr, 1) != 1; +} + +/* ------------------------------------------------------------------------ */ + +static int ks8995_stop(struct ks8995_switch *ks) +{ + return ks8995_write_reg(ks, KS8995_REG_ID1, 0); +} + +static int ks8995_start(struct ks8995_switch *ks) +{ + return ks8995_write_reg(ks, KS8995_REG_ID1, 1); +} + +static int ks8995_reset(struct ks8995_switch *ks) +{ + int err; + + err = ks8995_stop(ks); + if (err) + return err; + + udelay(KS8995_RESET_DELAY); + + return ks8995_start(ks); +} + +static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) +{ + struct device *dev; + struct ks8995_switch *ks8995; + + dev = kobj_to_dev(kobj); + ks8995 = dev_get_drvdata(dev); + + return ks8995_read(ks8995, buf, off, count); +} + +static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) +{ + struct device *dev; + struct ks8995_switch *ks8995; + + dev = kobj_to_dev(kobj); + ks8995 = dev_get_drvdata(dev); + + return ks8995_write(ks8995, buf, off, count); +} + +/* ks8995_get_revision - get chip revision + * @ks: pointer to switch instance + * + * Verify chip family and id and get chip revision. + */ +static int ks8995_get_revision(struct ks8995_switch *ks) +{ + int err; + u8 id0, id1, ksz8864_id; + + /* read family id */ + err = ks8995_read_reg(ks, KS8995_REG_ID0, &id0); + if (err) { + err = -EIO; + goto err_out; + } + + /* verify family id */ + if (id0 != ks->chip->family_id) { + dev_err(&ks->spi->dev, "chip family id mismatch: expected 0x%02x but 0x%02x read\n", + ks->chip->family_id, id0); + err = -ENODEV; + goto err_out; + } + + switch (ks->chip->family_id) { + case FAMILY_KS8995: + /* try reading chip id at CHIP ID1 */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1); + if (err) { + err = -EIO; + goto err_out; + } + + /* verify chip id */ + if ((get_chip_id(id1) == CHIPID_M) && + (get_chip_id(id1) == ks->chip->chip_id)) { + /* KS8995MA */ + ks->revision_id = get_chip_rev(id1); + } else if (get_chip_id(id1) != CHIPID_M) { + /* KSZ8864RMN */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &ksz8864_id); + if (err) { + err = -EIO; + goto err_out; + } + + if ((ksz8864_id & 0x80) && + (ks->chip->chip_id == KSZ8864_CHIP_ID)) { + ks->revision_id = get_chip_rev(id1); + } + + } else { + dev_err(&ks->spi->dev, "unsupported chip id for KS8995 family: 0x%02x\n", + id1); + err = -ENODEV; + } + break; + case FAMILY_KSZ8795: + /* try reading chip id at CHIP ID1 */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1); + if (err) { + err = -EIO; + goto err_out; + } + + if (get_chip_id(id1) == ks->chip->chip_id) { + ks->revision_id = get_chip_rev(id1); + } else { + dev_err(&ks->spi->dev, "unsupported chip id for KSZ8795 family: 0x%02x\n", + id1); + err = -ENODEV; + } + break; + default: + dev_err(&ks->spi->dev, "unsupported family id: 0x%02x\n", id0); + err = -ENODEV; + break; + } +err_out: + return err; +} + +static const struct bin_attribute ks8995_registers_attr = { + .attr = { + .name = "registers", + .mode = 0600, + }, + .size = KS8995_REGS_SIZE, + .read = ks8995_registers_read, + .write = ks8995_registers_write, +}; + +/* ------------------------------------------------------------------------ */ +static int ks8995_probe(struct spi_device *spi) +{ + struct ks8995_switch *ks; + int err; + int variant = spi_get_device_id(spi)->driver_data; + + if (variant >= max_variant) { + dev_err(&spi->dev, "bad chip variant %d\n", variant); + return -ENODEV; + } + + ks = devm_kzalloc(&spi->dev, sizeof(*ks), GFP_KERNEL); + if (!ks) + return -ENOMEM; + + mutex_init(&ks->lock); + ks->spi = spi; + ks->chip = &ks8995_chip[variant]; + + ks->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", + GPIOD_OUT_HIGH); + err = PTR_ERR_OR_ZERO(ks->reset_gpio); + if (err) { + dev_err(&spi->dev, + "failed to get reset gpio: %d\n", err); + return err; + } + + err = gpiod_set_consumer_name(ks->reset_gpio, "switch-reset"); + if (err) + return err; + + /* de-assert switch reset */ + /* FIXME: this likely requires a delay */ + gpiod_set_value_cansleep(ks->reset_gpio, 0); + + spi_set_drvdata(spi, ks); + + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + err = spi_setup(spi); + if (err) { + dev_err(&spi->dev, "spi_setup failed, err=%d\n", err); + return err; + } + + err = ks8995_get_revision(ks); + if (err) + return err; + + memcpy(&ks->regs_attr, &ks8995_registers_attr, sizeof(ks->regs_attr)); + ks->regs_attr.size = ks->chip->regs_size; + + err = ks8995_reset(ks); + if (err) + return err; + + sysfs_attr_init(&ks->regs_attr.attr); + err = sysfs_create_bin_file(&spi->dev.kobj, &ks->regs_attr); + if (err) { + dev_err(&spi->dev, "unable to create sysfs file, err=%d\n", + err); + return err; + } + + dev_info(&spi->dev, "%s device found, Chip ID:%x, Revision:%x\n", + ks->chip->name, ks->chip->chip_id, ks->revision_id); + + return 0; +} + +static void ks8995_remove(struct spi_device *spi) +{ + struct ks8995_switch *ks = spi_get_drvdata(spi); + + sysfs_remove_bin_file(&spi->dev.kobj, &ks->regs_attr); + + /* assert reset */ + gpiod_set_value_cansleep(ks->reset_gpio, 1); +} + +/* ------------------------------------------------------------------------ */ +static struct spi_driver ks8995_driver = { + .driver = { + .name = "spi-ks8995", + .of_match_table = of_match_ptr(ks8895_spi_of_match), + }, + .probe = ks8995_probe, + .remove = ks8995_remove, + .id_table = ks8995_id, +}; + +module_spi_driver(ks8995_driver); + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3