From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/usb/int51x1.c | 189 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 drivers/net/usb/int51x1.c (limited to 'drivers/net/usb/int51x1.c') diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c new file mode 100644 index 000000000..6fde41550 --- /dev/null +++ b/drivers/net/usb/int51x1.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2009 Peter Holik + * + * Intellon usb PLC (Powerline Communications) usb net driver + * + * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf + * + * Based on the work of Jan 'RedBully' Seiffert + */ + +/* + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define INT51X1_VENDOR_ID 0x09e1 +#define INT51X1_PRODUCT_ID 0x5121 + +#define INT51X1_HEADER_SIZE 2 /* 2 byte header */ + +#define PACKET_TYPE_PROMISCUOUS (1 << 0) +#define PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ +#define PACKET_TYPE_DIRECTED (1 << 2) +#define PACKET_TYPE_BROADCAST (1 << 3) +#define PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ + +#define SET_ETHERNET_PACKET_FILTER 0x43 + +static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int len; + + if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) { + netdev_err(dev->net, "unexpected tiny rx frame\n"); + return 0; + } + + len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]); + + skb_trim(skb, len); + + return 1; +} + +static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev, + struct sk_buff *skb, gfp_t flags) +{ + int pack_len = skb->len; + int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE; + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + int need_tail = 0; + __le16 *len; + + /* if packet and our header is smaller than 64 pad to 64 (+ ZLP) */ + if ((pack_with_header_len) < dev->maxpacket) + need_tail = dev->maxpacket - pack_with_header_len + 1; + /* + * usbnet would send a ZLP if packetlength mod urbsize == 0 for us, + * but we need to know ourself, because this would add to the length + * we send down to the device... + */ + else if (!(pack_with_header_len % dev->maxpacket)) + need_tail = 1; + + if (!skb_cloned(skb) && + (headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) { + if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) { + skb->data = memmove(skb->head + INT51X1_HEADER_SIZE, + skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + } + } else { + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, + INT51X1_HEADER_SIZE, + need_tail, + flags); + dev_kfree_skb_any(skb); + if (!skb2) + return NULL; + skb = skb2; + } + + pack_len += need_tail; + pack_len &= 0x07ff; + + len = __skb_push(skb, INT51X1_HEADER_SIZE); + *len = cpu_to_le16(pack_len); + + if(need_tail) + __skb_put_zero(skb, need_tail); + + return skb; +} + +static void int51x1_set_multicast(struct net_device *netdev) +{ + struct usbnet *dev = netdev_priv(netdev); + u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST; + + if (netdev->flags & IFF_PROMISC) { + /* do not expect to see traffic of other PLCs */ + filter |= PACKET_TYPE_PROMISCUOUS; + netdev_info(dev->net, "promiscuous mode enabled\n"); + } else if (!netdev_mc_empty(netdev) || + (netdev->flags & IFF_ALLMULTI)) { + filter |= PACKET_TYPE_ALL_MULTICAST; + netdev_dbg(dev->net, "receive all multicast enabled\n"); + } else { + /* ~PROMISCUOUS, ~MULTICAST */ + netdev_dbg(dev->net, "receive own packets only\n"); + } + + usbnet_write_cmd_async(dev, SET_ETHERNET_PACKET_FILTER, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + filter, 0, NULL, 0); +} + +static const struct net_device_ops int51x1_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_get_stats64 = dev_get_tstats64, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = int51x1_set_multicast, +}; + +static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = usbnet_get_ethernet_addr(dev, 3); + + if (status) + return status; + + dev->net->hard_header_len += INT51X1_HEADER_SIZE; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; + dev->net->netdev_ops = &int51x1_netdev_ops; + + return usbnet_get_endpoints(dev, intf); +} + +static const struct driver_info int51x1_info = { + .description = "Intellon usb powerline adapter", + .bind = int51x1_bind, + .rx_fixup = int51x1_rx_fixup, + .tx_fixup = int51x1_tx_fixup, + .in = 1, + .out = 2, + .flags = FLAG_ETHER, +}; + +static const struct usb_device_id products[] = { + { + USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID), + .driver_info = (unsigned long) &int51x1_info, + }, + {}, +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver int51x1_driver = { + .name = "int51x1", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(int51x1_driver); + +MODULE_AUTHOR("Peter Holik"); +MODULE_DESCRIPTION("Intellon usb powerline adapter"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3