From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wan/slic_ds26522.c | 244 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+) create mode 100644 drivers/net/wan/slic_ds26522.c (limited to 'drivers/net/wan/slic_ds26522.c') diff --git a/drivers/net/wan/slic_ds26522.c b/drivers/net/wan/slic_ds26522.c new file mode 100644 index 000000000..6063552ce --- /dev/null +++ b/drivers/net/wan/slic_ds26522.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * drivers/net/wan/slic_ds26522.c + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * Author:Zhao Qiang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "slic_ds26522.h" + +#define SLIC_TRANS_LEN 1 +#define SLIC_TWO_LEN 2 +#define SLIC_THREE_LEN 3 + +static struct spi_device *g_spi; + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Zhao Qiang"); + +/* the read/write format of address is + * w/r|A13|A12|A11|A10|A9|A8|A7|A6|A5|A4|A3|A2|A1|A0|x + */ +static void slic_write(struct spi_device *spi, u16 addr, + u8 data) +{ + u8 temp[3]; + + addr = bitrev16(addr) >> 1; + data = bitrev8(data); + temp[0] = (u8)((addr >> 8) & 0x7f); + temp[1] = (u8)(addr & 0xfe); + temp[2] = data; + + /* write spi addr and value */ + spi_write(spi, &temp[0], SLIC_THREE_LEN); +} + +static u8 slic_read(struct spi_device *spi, u16 addr) +{ + u8 temp[2]; + u8 data; + + addr = bitrev16(addr) >> 1; + temp[0] = (u8)(((addr >> 8) & 0x7f) | 0x80); + temp[1] = (u8)(addr & 0xfe); + + spi_write_then_read(spi, &temp[0], SLIC_TWO_LEN, &data, + SLIC_TRANS_LEN); + + data = bitrev8(data); + return data; +} + +static bool get_slic_product_code(struct spi_device *spi) +{ + u8 device_id; + + device_id = slic_read(spi, DS26522_IDR_ADDR); + if ((device_id & 0xf8) == 0x68) + return true; + else + return false; +} + +static void ds26522_e1_spec_config(struct spi_device *spi) +{ + /* Receive E1 Mode, Framer Disabled */ + slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_E1); + + /* Transmit E1 Mode, Framer Disable */ + slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_E1); + + /* Receive E1 Mode Framer Enable */ + slic_write(spi, DS26522_RMMR_ADDR, + slic_read(spi, DS26522_RMMR_ADDR) | DS26522_RMMR_FRM_EN); + + /* Transmit E1 Mode Framer Enable */ + slic_write(spi, DS26522_TMMR_ADDR, + slic_read(spi, DS26522_TMMR_ADDR) | DS26522_TMMR_FRM_EN); + + /* RCR1, receive E1 B8zs & ESF */ + slic_write(spi, DS26522_RCR1_ADDR, + DS26522_RCR1_E1_HDB3 | DS26522_RCR1_E1_CCS); + + /* RSYSCLK=2.048MHz, RSYNC-Output */ + slic_write(spi, DS26522_RIOCR_ADDR, + DS26522_RIOCR_2048KHZ | DS26522_RIOCR_RSIO_OUT); + + /* TCR1 Transmit E1 b8zs */ + slic_write(spi, DS26522_TCR1_ADDR, DS26522_TCR1_TB8ZS); + + /* TSYSCLK=2.048MHz, TSYNC-Output */ + slic_write(spi, DS26522_TIOCR_ADDR, + DS26522_TIOCR_2048KHZ | DS26522_TIOCR_TSIO_OUT); + + /* Set E1TAF */ + slic_write(spi, DS26522_E1TAF_ADDR, DS26522_E1TAF_DEFAULT); + + /* Set E1TNAF register */ + slic_write(spi, DS26522_E1TNAF_ADDR, DS26522_E1TNAF_DEFAULT); + + /* Receive E1 Mode Framer Enable & init Done */ + slic_write(spi, DS26522_RMMR_ADDR, slic_read(spi, DS26522_RMMR_ADDR) | + DS26522_RMMR_INIT_DONE); + + /* Transmit E1 Mode Framer Enable & init Done */ + slic_write(spi, DS26522_TMMR_ADDR, slic_read(spi, DS26522_TMMR_ADDR) | + DS26522_TMMR_INIT_DONE); + + /* Configure LIU E1 mode */ + slic_write(spi, DS26522_LTRCR_ADDR, DS26522_LTRCR_E1); + + /* E1 Mode default 75 ohm w/Transmit Impedance Matlinking */ + slic_write(spi, DS26522_LTITSR_ADDR, + DS26522_LTITSR_TLIS_75OHM | DS26522_LTITSR_LBOS_75OHM); + + /* E1 Mode default 75 ohm Long Haul w/Receive Impedance Matlinking */ + slic_write(spi, DS26522_LRISMR_ADDR, + DS26522_LRISMR_75OHM | DS26522_LRISMR_MAX); + + /* Enable Transmit output */ + slic_write(spi, DS26522_LMCR_ADDR, DS26522_LMCR_TE); +} + +static int slic_ds26522_init_configure(struct spi_device *spi) +{ + u16 addr; + + /* set clock */ + slic_write(spi, DS26522_GTCCR_ADDR, DS26522_GTCCR_BPREFSEL_REFCLKIN | + DS26522_GTCCR_BFREQSEL_2048KHZ | + DS26522_GTCCR_FREQSEL_2048KHZ); + slic_write(spi, DS26522_GTCR2_ADDR, DS26522_GTCR2_TSSYNCOUT); + slic_write(spi, DS26522_GFCR_ADDR, DS26522_GFCR_BPCLK_2048KHZ); + + /* set gtcr */ + slic_write(spi, DS26522_GTCR1_ADDR, DS26522_GTCR1); + + /* Global LIU Software Reset Register */ + slic_write(spi, DS26522_GLSRR_ADDR, DS26522_GLSRR_RESET); + + /* Global Framer and BERT Software Reset Register */ + slic_write(spi, DS26522_GFSRR_ADDR, DS26522_GFSRR_RESET); + + usleep_range(100, 120); + + slic_write(spi, DS26522_GLSRR_ADDR, DS26522_GLSRR_NORMAL); + slic_write(spi, DS26522_GFSRR_ADDR, DS26522_GFSRR_NORMAL); + + /* Perform RX/TX SRESET,Reset receiver */ + slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_SFTRST); + + /* Reset tranceiver */ + slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_SFTRST); + + usleep_range(100, 120); + + /* Zero all Framer Registers */ + for (addr = DS26522_RF_ADDR_START; addr <= DS26522_RF_ADDR_END; + addr++) + slic_write(spi, addr, 0); + + for (addr = DS26522_TF_ADDR_START; addr <= DS26522_TF_ADDR_END; + addr++) + slic_write(spi, addr, 0); + + for (addr = DS26522_LIU_ADDR_START; addr <= DS26522_LIU_ADDR_END; + addr++) + slic_write(spi, addr, 0); + + for (addr = DS26522_BERT_ADDR_START; addr <= DS26522_BERT_ADDR_END; + addr++) + slic_write(spi, addr, 0); + + /* setup ds26522 for E1 specification */ + ds26522_e1_spec_config(spi); + + slic_write(spi, DS26522_GTCR1_ADDR, 0x00); + + return 0; +} + +static void slic_ds26522_remove(struct spi_device *spi) +{ + pr_info("DS26522 module uninstalled\n"); +} + +static int slic_ds26522_probe(struct spi_device *spi) +{ + int ret = 0; + + g_spi = spi; + spi->bits_per_word = 8; + + if (!get_slic_product_code(spi)) + return ret; + + ret = slic_ds26522_init_configure(spi); + if (ret == 0) + pr_info("DS26522 cs%d configured\n", spi->chip_select); + + return ret; +} + +static const struct spi_device_id slic_ds26522_id[] = { + { .name = "ds26522" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(spi, slic_ds26522_id); + +static const struct of_device_id slic_ds26522_match[] = { + { + .compatible = "maxim,ds26522", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, slic_ds26522_match); + +static struct spi_driver slic_ds26522_driver = { + .driver = { + .name = "ds26522", + .bus = &spi_bus_type, + .of_match_table = slic_ds26522_match, + }, + .probe = slic_ds26522_probe, + .remove = slic_ds26522_remove, + .id_table = slic_ds26522_id, +}; + +module_spi_driver(slic_ds26522_driver); -- cgit v1.2.3