From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ath/ath6kl/hif.c | 699 ++++++++++++++++++++++++++++++++++ 1 file changed, 699 insertions(+) create mode 100644 drivers/net/wireless/ath/ath6kl/hif.c (limited to 'drivers/net/wireless/ath/ath6kl/hif.c') diff --git a/drivers/net/wireless/ath/ath6kl/hif.c b/drivers/net/wireless/ath/ath6kl/hif.c new file mode 100644 index 000000000..d1942537e --- /dev/null +++ b/drivers/net/wireless/ath/ath6kl/hif.c @@ -0,0 +1,699 @@ +/* + * Copyright (c) 2007-2011 Atheros Communications Inc. + * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include "hif.h" + +#include + +#include "core.h" +#include "target.h" +#include "hif-ops.h" +#include "debug.h" +#include "trace.h" + +#define MAILBOX_FOR_BLOCK_SIZE 1 + +#define ATH6KL_TIME_QUANTUM 10 /* in ms */ + +static int ath6kl_hif_cp_scat_dma_buf(struct hif_scatter_req *req, + bool from_dma) +{ + u8 *buf; + int i; + + buf = req->virt_dma_buf; + + for (i = 0; i < req->scat_entries; i++) { + if (from_dma) + memcpy(req->scat_list[i].buf, buf, + req->scat_list[i].len); + else + memcpy(buf, req->scat_list[i].buf, + req->scat_list[i].len); + + buf += req->scat_list[i].len; + } + + return 0; +} + +int ath6kl_hif_rw_comp_handler(void *context, int status) +{ + struct htc_packet *packet = context; + + ath6kl_dbg(ATH6KL_DBG_HIF, "hif rw completion pkt 0x%p status %d\n", + packet, status); + + packet->status = status; + packet->completion(packet->context, packet); + + return 0; +} +EXPORT_SYMBOL(ath6kl_hif_rw_comp_handler); + +#define REGISTER_DUMP_COUNT 60 +#define REGISTER_DUMP_LEN_MAX 60 + +static void ath6kl_hif_dump_fw_crash(struct ath6kl *ar) +{ + __le32 regdump_val[REGISTER_DUMP_LEN_MAX]; + u32 i, address, regdump_addr = 0; + int ret; + + /* the reg dump pointer is copied to the host interest area */ + address = ath6kl_get_hi_item_addr(ar, HI_ITEM(hi_failure_state)); + address = TARG_VTOP(ar->target_type, address); + + /* read RAM location through diagnostic window */ + ret = ath6kl_diag_read32(ar, address, ®dump_addr); + + if (ret || !regdump_addr) { + ath6kl_warn("failed to get ptr to register dump area: %d\n", + ret); + return; + } + + ath6kl_dbg(ATH6KL_DBG_IRQ, "register dump data address 0x%x\n", + regdump_addr); + regdump_addr = TARG_VTOP(ar->target_type, regdump_addr); + + /* fetch register dump data */ + ret = ath6kl_diag_read(ar, regdump_addr, (u8 *)®dump_val[0], + REGISTER_DUMP_COUNT * (sizeof(u32))); + if (ret) { + ath6kl_warn("failed to get register dump: %d\n", ret); + return; + } + + ath6kl_info("crash dump:\n"); + ath6kl_info("hw 0x%x fw %s\n", ar->wiphy->hw_version, + ar->wiphy->fw_version); + + BUILD_BUG_ON(REGISTER_DUMP_COUNT % 4); + + for (i = 0; i < REGISTER_DUMP_COUNT; i += 4) { + ath6kl_info("%d: 0x%8.8x 0x%8.8x 0x%8.8x 0x%8.8x\n", + i, + le32_to_cpu(regdump_val[i]), + le32_to_cpu(regdump_val[i + 1]), + le32_to_cpu(regdump_val[i + 2]), + le32_to_cpu(regdump_val[i + 3])); + } +} + +static int ath6kl_hif_proc_dbg_intr(struct ath6kl_device *dev) +{ + u32 dummy; + int ret; + + ath6kl_warn("firmware crashed\n"); + + /* + * read counter to clear the interrupt, the debug error interrupt is + * counter 0. + */ + ret = hif_read_write_sync(dev->ar, COUNT_DEC_ADDRESS, + (u8 *)&dummy, 4, HIF_RD_SYNC_BYTE_INC); + if (ret) + ath6kl_warn("Failed to clear debug interrupt: %d\n", ret); + + ath6kl_hif_dump_fw_crash(dev->ar); + ath6kl_read_fwlogs(dev->ar); + ath6kl_recovery_err_notify(dev->ar, ATH6KL_FW_ASSERT); + + return ret; +} + +/* mailbox recv message polling */ +int ath6kl_hif_poll_mboxmsg_rx(struct ath6kl_device *dev, u32 *lk_ahd, + int timeout) +{ + struct ath6kl_irq_proc_registers *rg; + int status = 0, i; + u8 htc_mbox = 1 << HTC_MAILBOX; + + for (i = timeout / ATH6KL_TIME_QUANTUM; i > 0; i--) { + /* this is the standard HIF way, load the reg table */ + status = hif_read_write_sync(dev->ar, HOST_INT_STATUS_ADDRESS, + (u8 *) &dev->irq_proc_reg, + sizeof(dev->irq_proc_reg), + HIF_RD_SYNC_BYTE_INC); + + if (status) { + ath6kl_err("failed to read reg table\n"); + return status; + } + + /* check for MBOX data and valid lookahead */ + if (dev->irq_proc_reg.host_int_status & htc_mbox) { + if (dev->irq_proc_reg.rx_lkahd_valid & + htc_mbox) { + /* + * Mailbox has a message and the look ahead + * is valid. + */ + rg = &dev->irq_proc_reg; + *lk_ahd = + le32_to_cpu(rg->rx_lkahd[HTC_MAILBOX]); + break; + } + } + + /* delay a little */ + mdelay(ATH6KL_TIME_QUANTUM); + ath6kl_dbg(ATH6KL_DBG_HIF, "hif retry mbox poll try %d\n", i); + } + + if (i == 0) { + ath6kl_err("timeout waiting for recv message\n"); + status = -ETIME; + /* check if the target asserted */ + if (dev->irq_proc_reg.counter_int_status & + ATH6KL_TARGET_DEBUG_INTR_MASK) + /* + * Target failure handler will be called in case of + * an assert. + */ + ath6kl_hif_proc_dbg_intr(dev); + } + + return status; +} + +/* + * Disable packet reception (used in case the host runs out of buffers) + * using the interrupt enable registers through the host I/F + */ +int ath6kl_hif_rx_control(struct ath6kl_device *dev, bool enable_rx) +{ + struct ath6kl_irq_enable_reg regs; + int status = 0; + + ath6kl_dbg(ATH6KL_DBG_HIF, "hif rx %s\n", + enable_rx ? "enable" : "disable"); + + /* take the lock to protect interrupt enable shadows */ + spin_lock_bh(&dev->lock); + + if (enable_rx) + dev->irq_en_reg.int_status_en |= + SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01); + else + dev->irq_en_reg.int_status_en &= + ~SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01); + + memcpy(®s, &dev->irq_en_reg, sizeof(regs)); + + spin_unlock_bh(&dev->lock); + + status = hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS, + ®s.int_status_en, + sizeof(struct ath6kl_irq_enable_reg), + HIF_WR_SYNC_BYTE_INC); + + return status; +} + +int ath6kl_hif_submit_scat_req(struct ath6kl_device *dev, + struct hif_scatter_req *scat_req, bool read) +{ + int status = 0; + + if (read) { + scat_req->req = HIF_RD_SYNC_BLOCK_FIX; + scat_req->addr = dev->ar->mbox_info.htc_addr; + } else { + scat_req->req = HIF_WR_ASYNC_BLOCK_INC; + + scat_req->addr = + (scat_req->len > HIF_MBOX_WIDTH) ? + dev->ar->mbox_info.htc_ext_addr : + dev->ar->mbox_info.htc_addr; + } + + ath6kl_dbg(ATH6KL_DBG_HIF, + "hif submit scatter request entries %d len %d mbox 0x%x %s %s\n", + scat_req->scat_entries, scat_req->len, + scat_req->addr, !read ? "async" : "sync", + (read) ? "rd" : "wr"); + + if (!read && scat_req->virt_scat) { + status = ath6kl_hif_cp_scat_dma_buf(scat_req, false); + if (status) { + scat_req->status = status; + scat_req->complete(dev->ar->htc_target, scat_req); + return 0; + } + } + + status = ath6kl_hif_scat_req_rw(dev->ar, scat_req); + + if (read) { + /* in sync mode, we can touch the scatter request */ + scat_req->status = status; + if (!status && scat_req->virt_scat) + scat_req->status = + ath6kl_hif_cp_scat_dma_buf(scat_req, true); + } + + return status; +} + +static int ath6kl_hif_proc_counter_intr(struct ath6kl_device *dev) +{ + u8 counter_int_status; + + ath6kl_dbg(ATH6KL_DBG_IRQ, "counter interrupt\n"); + + counter_int_status = dev->irq_proc_reg.counter_int_status & + dev->irq_en_reg.cntr_int_status_en; + + ath6kl_dbg(ATH6KL_DBG_IRQ, + "valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n", + counter_int_status); + + /* + * NOTE: other modules like GMBOX may use the counter interrupt for + * credit flow control on other counters, we only need to check for + * the debug assertion counter interrupt. + */ + if (counter_int_status & ATH6KL_TARGET_DEBUG_INTR_MASK) + return ath6kl_hif_proc_dbg_intr(dev); + + return 0; +} + +static int ath6kl_hif_proc_err_intr(struct ath6kl_device *dev) +{ + int status; + u8 error_int_status; + u8 reg_buf[4]; + + ath6kl_dbg(ATH6KL_DBG_IRQ, "error interrupt\n"); + + error_int_status = dev->irq_proc_reg.error_int_status & 0x0F; + if (!error_int_status) { + WARN_ON(1); + return -EIO; + } + + ath6kl_dbg(ATH6KL_DBG_IRQ, + "valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n", + error_int_status); + + if (MS(ERROR_INT_STATUS_WAKEUP, error_int_status)) + ath6kl_dbg(ATH6KL_DBG_IRQ, "error : wakeup\n"); + + if (MS(ERROR_INT_STATUS_RX_UNDERFLOW, error_int_status)) + ath6kl_err("rx underflow\n"); + + if (MS(ERROR_INT_STATUS_TX_OVERFLOW, error_int_status)) + ath6kl_err("tx overflow\n"); + + /* Clear the interrupt */ + dev->irq_proc_reg.error_int_status &= ~error_int_status; + + /* set W1C value to clear the interrupt, this hits the register first */ + reg_buf[0] = error_int_status; + reg_buf[1] = 0; + reg_buf[2] = 0; + reg_buf[3] = 0; + + status = hif_read_write_sync(dev->ar, ERROR_INT_STATUS_ADDRESS, + reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); + + WARN_ON(status); + + return status; +} + +static int ath6kl_hif_proc_cpu_intr(struct ath6kl_device *dev) +{ + int status; + u8 cpu_int_status; + u8 reg_buf[4]; + + ath6kl_dbg(ATH6KL_DBG_IRQ, "cpu interrupt\n"); + + cpu_int_status = dev->irq_proc_reg.cpu_int_status & + dev->irq_en_reg.cpu_int_status_en; + if (!cpu_int_status) { + WARN_ON(1); + return -EIO; + } + + ath6kl_dbg(ATH6KL_DBG_IRQ, + "valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n", + cpu_int_status); + + /* Clear the interrupt */ + dev->irq_proc_reg.cpu_int_status &= ~cpu_int_status; + + /* + * Set up the register transfer buffer to hit the register 4 times , + * this is done to make the access 4-byte aligned to mitigate issues + * with host bus interconnects that restrict bus transfer lengths to + * be a multiple of 4-bytes. + */ + + /* set W1C value to clear the interrupt, this hits the register first */ + reg_buf[0] = cpu_int_status; + /* the remaining are set to zero which have no-effect */ + reg_buf[1] = 0; + reg_buf[2] = 0; + reg_buf[3] = 0; + + status = hif_read_write_sync(dev->ar, CPU_INT_STATUS_ADDRESS, + reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); + + WARN_ON(status); + + return status; +} + +/* process pending interrupts synchronously */ +static int proc_pending_irqs(struct ath6kl_device *dev, bool *done) +{ + struct ath6kl_irq_proc_registers *rg; + int status = 0; + u8 host_int_status = 0; + u32 lk_ahd = 0; + u8 htc_mbox = 1 << HTC_MAILBOX; + + ath6kl_dbg(ATH6KL_DBG_IRQ, "proc_pending_irqs: (dev: 0x%p)\n", dev); + + /* + * NOTE: HIF implementation guarantees that the context of this + * call allows us to perform SYNCHRONOUS I/O, that is we can block, + * sleep or call any API that can block or switch thread/task + * contexts. This is a fully schedulable context. + */ + + /* + * Process pending intr only when int_status_en is clear, it may + * result in unnecessary bus transaction otherwise. Target may be + * unresponsive at the time. + */ + if (dev->irq_en_reg.int_status_en) { + /* + * Read the first 28 bytes of the HTC register table. This + * will yield us the value of different int status + * registers and the lookahead registers. + * + * length = sizeof(int_status) + sizeof(cpu_int_status) + * + sizeof(error_int_status) + + * sizeof(counter_int_status) + + * sizeof(mbox_frame) + sizeof(rx_lkahd_valid) + * + sizeof(hole) + sizeof(rx_lkahd) + + * sizeof(int_status_en) + + * sizeof(cpu_int_status_en) + + * sizeof(err_int_status_en) + + * sizeof(cntr_int_status_en); + */ + status = hif_read_write_sync(dev->ar, HOST_INT_STATUS_ADDRESS, + (u8 *) &dev->irq_proc_reg, + sizeof(dev->irq_proc_reg), + HIF_RD_SYNC_BYTE_INC); + if (status) + goto out; + + ath6kl_dump_registers(dev, &dev->irq_proc_reg, + &dev->irq_en_reg); + trace_ath6kl_sdio_irq(&dev->irq_en_reg, + sizeof(dev->irq_en_reg)); + + /* Update only those registers that are enabled */ + host_int_status = dev->irq_proc_reg.host_int_status & + dev->irq_en_reg.int_status_en; + + /* Look at mbox status */ + if (host_int_status & htc_mbox) { + /* + * Mask out pending mbox value, we use "lookAhead as + * the real flag for mbox processing. + */ + host_int_status &= ~htc_mbox; + if (dev->irq_proc_reg.rx_lkahd_valid & + htc_mbox) { + rg = &dev->irq_proc_reg; + lk_ahd = le32_to_cpu(rg->rx_lkahd[HTC_MAILBOX]); + if (!lk_ahd) + ath6kl_err("lookAhead is zero!\n"); + } + } + } + + if (!host_int_status && !lk_ahd) { + *done = true; + goto out; + } + + if (lk_ahd) { + int fetched = 0; + + ath6kl_dbg(ATH6KL_DBG_IRQ, + "pending mailbox msg, lk_ahd: 0x%X\n", lk_ahd); + /* + * Mailbox Interrupt, the HTC layer may issue async + * requests to empty the mailbox. When emptying the recv + * mailbox we use the async handler above called from the + * completion routine of the callers read request. This can + * improve performance by reducing context switching when + * we rapidly pull packets. + */ + status = ath6kl_htc_rxmsg_pending_handler(dev->htc_cnxt, + lk_ahd, &fetched); + if (status) + goto out; + + if (!fetched) + /* + * HTC could not pull any messages out due to lack + * of resources. + */ + dev->htc_cnxt->chk_irq_status_cnt = 0; + } + + /* now handle the rest of them */ + ath6kl_dbg(ATH6KL_DBG_IRQ, + "valid interrupt source(s) for other interrupts: 0x%x\n", + host_int_status); + + if (MS(HOST_INT_STATUS_CPU, host_int_status)) { + /* CPU Interrupt */ + status = ath6kl_hif_proc_cpu_intr(dev); + if (status) + goto out; + } + + if (MS(HOST_INT_STATUS_ERROR, host_int_status)) { + /* Error Interrupt */ + status = ath6kl_hif_proc_err_intr(dev); + if (status) + goto out; + } + + if (MS(HOST_INT_STATUS_COUNTER, host_int_status)) + /* Counter Interrupt */ + status = ath6kl_hif_proc_counter_intr(dev); + +out: + /* + * An optimization to bypass reading the IRQ status registers + * unecessarily which can re-wake the target, if upper layers + * determine that we are in a low-throughput mode, we can rely on + * taking another interrupt rather than re-checking the status + * registers which can re-wake the target. + * + * NOTE : for host interfaces that makes use of detecting pending + * mbox messages at hif can not use this optimization due to + * possible side effects, SPI requires the host to drain all + * messages from the mailbox before exiting the ISR routine. + */ + + ath6kl_dbg(ATH6KL_DBG_IRQ, + "bypassing irq status re-check, forcing done\n"); + + if (!dev->htc_cnxt->chk_irq_status_cnt) + *done = true; + + ath6kl_dbg(ATH6KL_DBG_IRQ, + "proc_pending_irqs: (done:%d, status=%d\n", *done, status); + + return status; +} + +/* interrupt handler, kicks off all interrupt processing */ +int ath6kl_hif_intr_bh_handler(struct ath6kl *ar) +{ + struct ath6kl_device *dev = ar->htc_target->dev; + unsigned long timeout; + int status = 0; + bool done = false; + + /* + * Reset counter used to flag a re-scan of IRQ status registers on + * the target. + */ + dev->htc_cnxt->chk_irq_status_cnt = 0; + + /* + * IRQ processing is synchronous, interrupt status registers can be + * re-read. + */ + timeout = jiffies + msecs_to_jiffies(ATH6KL_HIF_COMMUNICATION_TIMEOUT); + while (time_before(jiffies, timeout) && !done) { + status = proc_pending_irqs(dev, &done); + if (status) + break; + } + + return status; +} +EXPORT_SYMBOL(ath6kl_hif_intr_bh_handler); + +static int ath6kl_hif_enable_intrs(struct ath6kl_device *dev) +{ + struct ath6kl_irq_enable_reg regs; + int status; + + spin_lock_bh(&dev->lock); + + /* Enable all but ATH6KL CPU interrupts */ + dev->irq_en_reg.int_status_en = + SM(INT_STATUS_ENABLE_ERROR, 0x01) | + SM(INT_STATUS_ENABLE_CPU, 0x01) | + SM(INT_STATUS_ENABLE_COUNTER, 0x01); + + /* + * NOTE: There are some cases where HIF can do detection of + * pending mbox messages which is disabled now. + */ + dev->irq_en_reg.int_status_en |= SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01); + + /* Set up the CPU Interrupt status Register */ + dev->irq_en_reg.cpu_int_status_en = 0; + + /* Set up the Error Interrupt status Register */ + dev->irq_en_reg.err_int_status_en = + SM(ERROR_STATUS_ENABLE_RX_UNDERFLOW, 0x01) | + SM(ERROR_STATUS_ENABLE_TX_OVERFLOW, 0x1); + + /* + * Enable Counter interrupt status register to get fatal errors for + * debugging. + */ + dev->irq_en_reg.cntr_int_status_en = SM(COUNTER_INT_STATUS_ENABLE_BIT, + ATH6KL_TARGET_DEBUG_INTR_MASK); + memcpy(®s, &dev->irq_en_reg, sizeof(regs)); + + spin_unlock_bh(&dev->lock); + + status = hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS, + ®s.int_status_en, sizeof(regs), + HIF_WR_SYNC_BYTE_INC); + + if (status) + ath6kl_err("failed to update interrupt ctl reg err: %d\n", + status); + + return status; +} + +int ath6kl_hif_disable_intrs(struct ath6kl_device *dev) +{ + struct ath6kl_irq_enable_reg regs; + + spin_lock_bh(&dev->lock); + /* Disable all interrupts */ + dev->irq_en_reg.int_status_en = 0; + dev->irq_en_reg.cpu_int_status_en = 0; + dev->irq_en_reg.err_int_status_en = 0; + dev->irq_en_reg.cntr_int_status_en = 0; + memcpy(®s, &dev->irq_en_reg, sizeof(regs)); + spin_unlock_bh(&dev->lock); + + return hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS, + ®s.int_status_en, sizeof(regs), + HIF_WR_SYNC_BYTE_INC); +} + +/* enable device interrupts */ +int ath6kl_hif_unmask_intrs(struct ath6kl_device *dev) +{ + int status = 0; + + /* + * Make sure interrupt are disabled before unmasking at the HIF + * layer. The rationale here is that between device insertion + * (where we clear the interrupts the first time) and when HTC + * is finally ready to handle interrupts, other software can perform + * target "soft" resets. The ATH6KL interrupt enables reset back to an + * "enabled" state when this happens. + */ + ath6kl_hif_disable_intrs(dev); + + /* unmask the host controller interrupts */ + ath6kl_hif_irq_enable(dev->ar); + status = ath6kl_hif_enable_intrs(dev); + + return status; +} + +/* disable all device interrupts */ +int ath6kl_hif_mask_intrs(struct ath6kl_device *dev) +{ + /* + * Mask the interrupt at the HIF layer to avoid any stray interrupt + * taken while we zero out our shadow registers in + * ath6kl_hif_disable_intrs(). + */ + ath6kl_hif_irq_disable(dev->ar); + + return ath6kl_hif_disable_intrs(dev); +} + +int ath6kl_hif_setup(struct ath6kl_device *dev) +{ + int status = 0; + + spin_lock_init(&dev->lock); + + /* + * NOTE: we actually get the block size of a mailbox other than 0, + * for SDIO the block size on mailbox 0 is artificially set to 1. + * So we use the block size that is set for the other 3 mailboxes. + */ + dev->htc_cnxt->block_sz = dev->ar->mbox_info.block_size; + + /* must be a power of 2 */ + if ((dev->htc_cnxt->block_sz & (dev->htc_cnxt->block_sz - 1)) != 0) { + WARN_ON(1); + status = -EINVAL; + goto fail_setup; + } + + /* assemble mask, used for padding to a block */ + dev->htc_cnxt->block_mask = dev->htc_cnxt->block_sz - 1; + + ath6kl_dbg(ATH6KL_DBG_HIF, "hif block size %d mbox addr 0x%x\n", + dev->htc_cnxt->block_sz, dev->ar->mbox_info.htc_addr); + + status = ath6kl_hif_disable_intrs(dev); + +fail_setup: + return status; +} -- cgit v1.2.3