From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 600 ++++++++++++++++++++++++++++ 1 file changed, 600 insertions(+) create mode 100644 drivers/net/wireless/ath/ath9k/ar9002_phy.c (limited to 'drivers/net/wireless/ath/ath9k/ar9002_phy.c') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c new file mode 100644 index 000000000..23ac6b7c2 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -0,0 +1,600 @@ +/* + * Copyright (c) 2008-2011 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/** + * DOC: Programming Atheros 802.11n analog front end radios + * + * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express + * devices have either an external AR2133 analog front end radio for single + * band 2.4 GHz communication or an AR5133 analog front end radio for dual + * band 2.4 GHz / 5 GHz communication. + * + * All devices after the AR5416 and AR5418 family starting with the AR9280 + * have their analog front radios, MAC/BB and host PCIe/USB interface embedded + * into a single-chip and require less programming. + * + * The following single-chips exist with a respective embedded radio: + * + * AR9280 - 11n dual-band 2x2 MIMO for PCIe + * AR9281 - 11n single-band 1x2 MIMO for PCIe + * AR9285 - 11n single-band 1x1 for PCIe + * AR9287 - 11n single-band 2x2 MIMO for PCIe + * + * AR9220 - 11n dual-band 2x2 MIMO for PCI + * AR9223 - 11n single-band 2x2 MIMO for PCI + * + * AR9287 - 11n single-band 1x1 MIMO for USB + */ + +#include "hw.h" +#include "ar9002_phy.h" + +/** + * ar9002_hw_set_channel - set channel on single-chip device + * @ah: atheros hardware structure + * @chan: + * + * This is the function to change channel on single-chip devices, that is + * all devices after ar9280. + * + * This function takes the channel value in MHz and sets + * hardware channel value. Assumes writes have been enabled to analog bus. + * + * Actual Expression, + * + * For 2GHz channel, + * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) + * (freq_ref = 40MHz) + * + * For 5GHz channel, + * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10) + * (freq_ref = 40MHz/(24>>amodeRefSel)) + */ +static int ar9002_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) +{ + u16 bMode, fracMode, aModeRefSel = 0; + u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0; + struct chan_centers centers; + u32 refDivA = 24; + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL); + reg32 &= 0xc0000000; + + if (freq < 4800) { /* 2 GHz, fractional mode */ + u32 txctl; + int regWrites = 0; + + bMode = 1; + fracMode = 1; + aModeRefSel = 0; + channelSel = CHANSEL_2G(freq); + + if (AR_SREV_9287_11_OR_LATER(ah)) { + if (freq == 2484) { + /* Enable channel spreading for channel 14 */ + REG_WRITE_ARRAY(&ah->iniCckfirJapan2484, + 1, regWrites); + } else { + REG_WRITE_ARRAY(&ah->iniCckfirNormal, + 1, regWrites); + } + } else { + txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); + if (freq == 2484) { + /* Enable channel spreading for channel 14 */ + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl | AR_PHY_CCK_TX_CTRL_JAPAN); + } else { + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); + } + } + } else { + bMode = 0; + fracMode = 0; + + switch (ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) { + case 0: + if (IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan)) + aModeRefSel = 0; + else if ((freq % 20) == 0) + aModeRefSel = 3; + else if ((freq % 10) == 0) + aModeRefSel = 2; + if (aModeRefSel) + break; + fallthrough; + case 1: + default: + aModeRefSel = 0; + /* + * Enable 2G (fractional) mode for channels + * which are 5MHz spaced. + */ + fracMode = 1; + refDivA = 1; + channelSel = CHANSEL_5G(freq); + + /* RefDivA setting */ + ath9k_hw_analog_shift_rmw(ah, AR_AN_SYNTH9, + AR_AN_SYNTH9_REFDIVA, + AR_AN_SYNTH9_REFDIVA_S, refDivA); + + } + + if (!fracMode) { + ndiv = (freq * (refDivA >> aModeRefSel)) / 60; + channelSel = ndiv & 0x1ff; + channelFrac = (ndiv & 0xfffffe00) * 2; + channelSel = (channelSel << 17) | channelFrac; + } + } + + reg32 = reg32 | + (bMode << 29) | + (fracMode << 28) | (aModeRefSel << 26) | (channelSel); + + REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32); + + ah->curchan = chan; + + return 0; +} + +/** + * ar9002_hw_spur_mitigate - convert baseband spur frequency + * @ah: atheros hardware structure + * @chan: + * + * For single-chip solutions. Converts to baseband spur frequency given the + * input channel frequency and compute register settings below. + */ +static void ar9002_hw_spur_mitigate(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int bb_spur = AR_NO_SPUR; + int freq; + int bin; + int bb_spur_off, spur_subchannel_sd; + int spur_freq_sd; + int spur_delta_phase; + int denominator; + int tmp, newVal; + int i; + struct chan_centers centers; + + int cur_bb_spur; + bool is2GHz = IS_CHAN_2GHZ(chan); + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { + cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); + + if (AR_NO_SPUR == cur_bb_spur) + break; + + if (is2GHz) + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; + else + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; + + cur_bb_spur = cur_bb_spur - freq; + + if (IS_CHAN_HT40(chan)) { + if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { + bb_spur = cur_bb_spur; + break; + } + } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { + bb_spur = cur_bb_spur; + break; + } + } + + if (AR_NO_SPUR == bb_spur) { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + return; + } else { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + } + + bin = bb_spur * 320; + + tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); + + ENABLE_REGWRITE_BUFFER(ah); + + newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | + AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | + AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | + AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); + REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal); + + newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | + AR_PHY_SPUR_REG_ENABLE_MASK_PPM | + AR_PHY_SPUR_REG_MASK_RATE_SELECT | + AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | + SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); + REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); + + if (IS_CHAN_HT40(chan)) { + if (bb_spur < 0) { + spur_subchannel_sd = 1; + bb_spur_off = bb_spur + 10; + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur - 10; + } + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur; + } + + if (IS_CHAN_HT40(chan)) + spur_delta_phase = + ((bb_spur * 262144) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + else + spur_delta_phase = + ((bb_spur * 524288) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + + denominator = IS_CHAN_2GHZ(chan) ? 44 : 40; + spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; + + newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | + SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | + SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); + REG_WRITE(ah, AR_PHY_TIMING11, newVal); + + newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; + REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); + + ar5008_hw_cmn_spur_mitigate(ah, chan, bin); + + REGWRITE_BUFFER_FLUSH(ah); +} + +static void ar9002_olc_init(struct ath_hw *ah) +{ + u32 i; + + if (!OLC_FOR_AR9280_20_LATER(ah)) + return; + + if (OLC_FOR_AR9287_10_LATER(ah)) { + REG_SET_BIT(ah, AR_PHY_TX_PWRCTRL9, + AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL); + ath9k_hw_analog_shift_rmw(ah, AR9287_AN_TXPC0, + AR9287_AN_TXPC0_TXPCMODE, + AR9287_AN_TXPC0_TXPCMODE_S, + AR9287_AN_TXPC0_TXPCMODE_TEMPSENSE); + udelay(100); + } else { + for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++) + ah->originalGain[i] = + MS(REG_READ(ah, AR_PHY_TX_GAIN_TBL1 + i * 4), + AR_PHY_TX_GAIN); + ah->PDADCdelta = 0; + } +} + +static u32 ar9002_hw_compute_pll_control(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int ref_div = 5; + int pll_div = 0x2c; + u32 pll; + + if (chan && IS_CHAN_5GHZ(chan) && !IS_CHAN_A_FAST_CLOCK(ah, chan)) { + if (AR_SREV_9280_20(ah)) { + ref_div = 10; + pll_div = 0x50; + } else { + pll_div = 0x28; + } + } + + pll = SM(ref_div, AR_RTC_9160_PLL_REFDIV); + pll |= SM(pll_div, AR_RTC_9160_PLL_DIV); + + if (chan && IS_CHAN_HALF_RATE(chan)) + pll |= SM(0x1, AR_RTC_9160_PLL_CLKSEL); + else if (chan && IS_CHAN_QUARTER_RATE(chan)) + pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL); + + return pll; +} + +static void ar9002_hw_do_getnf(struct ath_hw *ah, + int16_t nfarray[NUM_NF_READINGS]) +{ + int16_t nf; + + nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR); + nfarray[0] = sign_extend32(nf, 8); + + nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR9280_PHY_EXT_MINCCA_PWR); + if (IS_CHAN_HT40(ah->curchan)) + nfarray[3] = sign_extend32(nf, 8); + + if (!(ah->rxchainmask & BIT(1))) + return; + + nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), AR9280_PHY_CH1_MINCCA_PWR); + nfarray[1] = sign_extend32(nf, 8); + + nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA), AR9280_PHY_CH1_EXT_MINCCA_PWR); + if (IS_CHAN_HT40(ah->curchan)) + nfarray[4] = sign_extend32(nf, 8); +} + +static void ar9002_hw_set_nf_limits(struct ath_hw *ah) +{ + if (AR_SREV_9285(ah)) { + ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9285_2GHZ; + ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9285_2GHZ; + ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9285_2GHZ; + } else if (AR_SREV_9287(ah)) { + ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9287_2GHZ; + ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9287_2GHZ; + ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9287_2GHZ; + } else if (AR_SREV_9271(ah)) { + ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9271_2GHZ; + ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9271_2GHZ; + ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9271_2GHZ; + } else { + ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_2GHZ; + ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_2GHZ; + ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9280_2GHZ; + ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_5GHZ; + ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_5GHZ; + ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9280_5GHZ; + } +} + +static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf) +{ + u32 regval; + + regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL); + antconf->main_lna_conf = (regval & AR_PHY_9285_ANT_DIV_MAIN_LNACONF) >> + AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S; + antconf->alt_lna_conf = (regval & AR_PHY_9285_ANT_DIV_ALT_LNACONF) >> + AR_PHY_9285_ANT_DIV_ALT_LNACONF_S; + antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >> + AR_PHY_9285_FAST_DIV_BIAS_S; + antconf->lna1_lna2_switch_delta = -1; + antconf->lna1_lna2_delta = -3; + antconf->div_group = 0; +} + +static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, + struct ath_hw_antcomb_conf *antconf) +{ + u32 regval; + + regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL); + regval &= ~(AR_PHY_9285_ANT_DIV_MAIN_LNACONF | + AR_PHY_9285_ANT_DIV_ALT_LNACONF | + AR_PHY_9285_FAST_DIV_BIAS); + regval |= ((antconf->main_lna_conf << AR_PHY_9285_ANT_DIV_MAIN_LNACONF_S) + & AR_PHY_9285_ANT_DIV_MAIN_LNACONF); + regval |= ((antconf->alt_lna_conf << AR_PHY_9285_ANT_DIV_ALT_LNACONF_S) + & AR_PHY_9285_ANT_DIV_ALT_LNACONF); + regval |= ((antconf->fast_div_bias << AR_PHY_9285_FAST_DIV_BIAS_S) + & AR_PHY_9285_FAST_DIV_BIAS); + + REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); +} + +#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT + +static void ar9002_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) +{ + struct ath_btcoex_hw *btcoex = &ah->btcoex_hw; + u8 antdiv_ctrl1, antdiv_ctrl2; + u32 regval; + + if (enable) { + antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_ENABLE; + antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_ENABLE; + + /* + * Don't disable BT ant to allow BB to control SWCOM. + */ + btcoex->bt_coex_mode2 &= (~(AR_BT_DISABLE_BT_ANT)); + REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2); + + REG_WRITE(ah, AR_PHY_SWITCH_COM, ATH_BT_COEX_ANT_DIV_SWITCH_COM); + REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000); + } else { + /* + * Disable antenna diversity, use LNA1 only. + */ + antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_FIXED_A; + antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_FIXED_A; + + /* + * Disable BT Ant. to allow concurrent BT and WLAN receive. + */ + btcoex->bt_coex_mode2 |= AR_BT_DISABLE_BT_ANT; + REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2); + + /* + * Program SWCOM table to make sure RF switch always parks + * at BT side. + */ + REG_WRITE(ah, AR_PHY_SWITCH_COM, 0); + REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000); + } + + regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL); + regval &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL)); + /* + * Clear ant_fast_div_bias [14:9] since for WB195, + * the main LNA is always LNA1. + */ + regval &= (~(AR_PHY_9285_FAST_DIV_BIAS)); + regval |= SM(antdiv_ctrl1, AR_PHY_9285_ANT_DIV_CTL); + regval |= SM(antdiv_ctrl2, AR_PHY_9285_ANT_DIV_ALT_LNACONF); + regval |= SM((antdiv_ctrl2 >> 2), AR_PHY_9285_ANT_DIV_MAIN_LNACONF); + regval |= SM((antdiv_ctrl1 >> 1), AR_PHY_9285_ANT_DIV_ALT_GAINTB); + regval |= SM((antdiv_ctrl1 >> 2), AR_PHY_9285_ANT_DIV_MAIN_GAINTB); + REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); + + regval = REG_READ(ah, AR_PHY_CCK_DETECT); + regval &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); + regval |= SM((antdiv_ctrl1 >> 3), AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); + REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); +} + +#endif + +static void ar9002_hw_spectral_scan_config(struct ath_hw *ah, + struct ath_spec_scan *param) +{ + u32 repeat_bit; + u8 count; + + if (!param->enabled) { + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ENABLE); + return; + } + REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA); + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + + if (AR_SREV_9280(ah)) + repeat_bit = AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT; + else + repeat_bit = AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_KIWI; + + if (param->short_repeat) + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, repeat_bit); + else + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, repeat_bit); + + /* on AR92xx, the highest bit of count will make the chip send + * spectral samples endlessly. Check if this really was intended, + * and fix otherwise. + */ + count = param->count; + if (param->endless) { + if (AR_SREV_9280(ah)) + count = 0x80; + else + count = 0; + } else if (count & 0x80) + count = 0x7f; + else if (!count) + count = 1; + + if (AR_SREV_9280(ah)) { + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_COUNT, count); + } else { + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_COUNT_KIWI, count); + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_PHYERR_MASK_SELECT); + } + + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_PERIOD, param->period); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_FFT_PERIOD, param->fft_period); + + return; +} + +static void ar9002_hw_spectral_scan_trigger(struct ath_hw *ah) +{ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + /* Activate spectral scan */ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE); +} + +static void ar9002_hw_spectral_scan_wait(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + + /* Poll for spectral scan complete */ + if (!ath9k_hw_wait(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE, + 0, AH_WAIT_TIMEOUT)) { + ath_err(common, "spectral scan wait failed\n"); + return; + } +} + +static void ar9002_hw_tx99_start(struct ath_hw *ah, u32 qnum) +{ + REG_SET_BIT(ah, 0x9864, 0x7f000); + REG_SET_BIT(ah, 0x9924, 0x7f00fe); + REG_CLR_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS); + REG_WRITE(ah, AR_CR, AR_CR_RXD); + REG_WRITE(ah, AR_DLCL_IFS(qnum), 0); + REG_WRITE(ah, AR_D_GBL_IFS_SIFS, 20); + REG_WRITE(ah, AR_D_GBL_IFS_EIFS, 20); + REG_WRITE(ah, AR_D_FPCTL, 0x10|qnum); + REG_WRITE(ah, AR_TIME_OUT, 0x00000400); + REG_WRITE(ah, AR_DRETRY_LIMIT(qnum), 0xffffffff); + REG_SET_BIT(ah, AR_QMISC(qnum), AR_Q_MISC_DCU_EARLY_TERM_REQ); +} + +static void ar9002_hw_tx99_stop(struct ath_hw *ah) +{ + REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS); +} + +void ar9002_hw_attach_phy_ops(struct ath_hw *ah) +{ + struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); + struct ath_hw_ops *ops = ath9k_hw_ops(ah); + + priv_ops->set_rf_regs = NULL; + priv_ops->rf_set_freq = ar9002_hw_set_channel; + priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; + priv_ops->olc_init = ar9002_olc_init; + priv_ops->compute_pll_control = ar9002_hw_compute_pll_control; + priv_ops->do_getnf = ar9002_hw_do_getnf; + + ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get; + ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set; + ops->spectral_scan_config = ar9002_hw_spectral_scan_config; + ops->spectral_scan_trigger = ar9002_hw_spectral_scan_trigger; + ops->spectral_scan_wait = ar9002_hw_spectral_scan_wait; + +#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT + ops->set_bt_ant_diversity = ar9002_hw_set_bt_ant_diversity; +#endif + ops->tx99_start = ar9002_hw_tx99_start; + ops->tx99_stop = ar9002_hw_tx99_stop; + + ar9002_hw_set_nf_limits(ah); +} -- cgit v1.2.3