From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 374 +++++++++++++++++++++++++ 1 file changed, 374 insertions(+) create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_eeprom.h (limited to 'drivers/net/wireless/ath/ath9k/ar9003_eeprom.h') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h new file mode 100644 index 000000000..b91ef1250 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -0,0 +1,374 @@ +/* + * Copyright (c) 2010-2011 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef AR9003_EEPROM_H +#define AR9003_EEPROM_H + +#include + +#define AR9300_EEP_VER 0xD000 +#define AR9300_EEP_VER_MINOR_MASK 0xFFF +#define AR9300_EEP_MINOR_VER_1 0x1 +#define AR9300_EEP_MINOR_VER AR9300_EEP_MINOR_VER_1 + +/* 16-bit offset location start of calibration struct */ +#define AR9300_EEP_START_LOC 256 +#define AR9300_NUM_5G_CAL_PIERS 8 +#define AR9300_NUM_2G_CAL_PIERS 3 +#define AR9300_NUM_5G_20_TARGET_POWERS 8 +#define AR9300_NUM_5G_40_TARGET_POWERS 8 +#define AR9300_NUM_2G_CCK_TARGET_POWERS 2 +#define AR9300_NUM_2G_20_TARGET_POWERS 3 +#define AR9300_NUM_2G_40_TARGET_POWERS 3 +/* #define AR9300_NUM_CTLS 21 */ +#define AR9300_NUM_CTLS_5G 9 +#define AR9300_NUM_CTLS_2G 12 +#define AR9300_NUM_BAND_EDGES_5G 8 +#define AR9300_NUM_BAND_EDGES_2G 4 +#define AR9300_EEPMISC_WOW 0x02 +#define AR9300_CUSTOMER_DATA_SIZE 20 + +#define AR9300_MAX_CHAINS 3 +#define AR9300_ANT_16S 25 +#define AR9300_FUTURE_MODAL_SZ 6 + +#define AR9300_PAPRD_RATE_MASK 0x01ffffff +#define AR9300_PAPRD_SCALE_1 0x0e000000 +#define AR9300_PAPRD_SCALE_1_S 25 +#define AR9300_PAPRD_SCALE_2 0x70000000 +#define AR9300_PAPRD_SCALE_2_S 28 + +#define AR9300_EEP_ANTDIV_CONTROL_DEFAULT_VALUE 0xc9 + +/* Delta from which to start power to pdadc table */ +/* This offset is used in both open loop and closed loop power control + * schemes. In open loop power control, it is not really needed, but for + * the "sake of consistency" it was kept. For certain AP designs, this + * value is overwritten by the value in the flag "pwrTableOffset" just + * before writing the pdadc vs pwr into the chip registers. + */ +#define AR9300_PWR_TABLE_OFFSET 0 + +/* Noise power data definitions + * units are: 4 x dBm - NOISE_PWR_DATA_OFFSET + * (e.g. -25 = (-25/4 - 90) = -96.25 dBm) + * range (for 6 signed bits) is (-32 to 31) + offset => -122dBm to -59dBm + * resolution (2 bits) is 0.25dBm + */ +#define NOISE_PWR_DATA_OFFSET -90 +#define NOISE_PWR_DBM_2_INT(_p) ((((_p) + 3) >> 2) + NOISE_PWR_DATA_OFFSET) +#define N2DBM(_p) NOISE_PWR_DBM_2_INT(_p) + +/* byte addressable */ +#define AR9300_EEPROM_SIZE (16*1024) + +#define AR9300_BASE_ADDR_4K 0xfff +#define AR9300_BASE_ADDR 0x3ff +#define AR9300_BASE_ADDR_512 0x1ff + +/* AR5416_EEPMISC_BIG_ENDIAN not set indicates little endian */ +#define AR9300_EEPMISC_LITTLE_ENDIAN 0 + +#define AR9300_OTP_BASE(_ah) \ + ((AR_SREV_9340(_ah) || AR_SREV_9550(_ah)) ? 0x30000 : 0x14000) +#define AR9300_OTP_STATUS(_ah) \ + ((AR_SREV_9340(_ah) || AR_SREV_9550(_ah)) ? 0x31018 : 0x15f18) +#define AR9300_OTP_STATUS_TYPE 0x7 +#define AR9300_OTP_STATUS_VALID 0x4 +#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 +#define AR9300_OTP_STATUS_SM_BUSY 0x1 +#define AR9300_OTP_READ_DATA(_ah) \ + ((AR_SREV_9340(_ah) || AR_SREV_9550(_ah)) ? 0x3101c : 0x15f1c) + +enum targetPowerHTRates { + HT_TARGET_RATE_0_8_16, + HT_TARGET_RATE_1_3_9_11_17_19, + HT_TARGET_RATE_4, + HT_TARGET_RATE_5, + HT_TARGET_RATE_6, + HT_TARGET_RATE_7, + HT_TARGET_RATE_12, + HT_TARGET_RATE_13, + HT_TARGET_RATE_14, + HT_TARGET_RATE_15, + HT_TARGET_RATE_20, + HT_TARGET_RATE_21, + HT_TARGET_RATE_22, + HT_TARGET_RATE_23 +}; + +enum targetPowerLegacyRates { + LEGACY_TARGET_RATE_6_24, + LEGACY_TARGET_RATE_36, + LEGACY_TARGET_RATE_48, + LEGACY_TARGET_RATE_54 +}; + +enum targetPowerCckRates { + LEGACY_TARGET_RATE_1L_5L, + LEGACY_TARGET_RATE_5S, + LEGACY_TARGET_RATE_11L, + LEGACY_TARGET_RATE_11S +}; + +enum ar9300_Rates { + ALL_TARGET_LEGACY_6_24, + ALL_TARGET_LEGACY_36, + ALL_TARGET_LEGACY_48, + ALL_TARGET_LEGACY_54, + ALL_TARGET_LEGACY_1L_5L, + ALL_TARGET_LEGACY_5S, + ALL_TARGET_LEGACY_11L, + ALL_TARGET_LEGACY_11S, + ALL_TARGET_HT20_0_8_16, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_4, + ALL_TARGET_HT20_5, + ALL_TARGET_HT20_6, + ALL_TARGET_HT20_7, + ALL_TARGET_HT20_12, + ALL_TARGET_HT20_13, + ALL_TARGET_HT20_14, + ALL_TARGET_HT20_15, + ALL_TARGET_HT20_20, + ALL_TARGET_HT20_21, + ALL_TARGET_HT20_22, + ALL_TARGET_HT20_23, + ALL_TARGET_HT40_0_8_16, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_4, + ALL_TARGET_HT40_5, + ALL_TARGET_HT40_6, + ALL_TARGET_HT40_7, + ALL_TARGET_HT40_12, + ALL_TARGET_HT40_13, + ALL_TARGET_HT40_14, + ALL_TARGET_HT40_15, + ALL_TARGET_HT40_20, + ALL_TARGET_HT40_21, + ALL_TARGET_HT40_22, + ALL_TARGET_HT40_23, + ar9300RateSize, +}; + + +struct eepFlags { + u8 opFlags; + u8 eepMisc; +} __packed; + +enum CompressAlgorithm { + _CompressNone = 0, + _CompressLzma, + _CompressPairs, + _CompressBlock, + _Compress4, + _Compress5, + _Compress6, + _Compress7, +}; + +struct ar9300_base_eep_hdr { + __le16 regDmn[2]; + /* 4 bits tx and 4 bits rx */ + u8 txrxMask; + struct eepFlags opCapFlags; + u8 rfSilent; + u8 blueToothOptions; + u8 deviceCap; + /* takes lower byte in eeprom location */ + u8 deviceType; + /* offset in dB to be added to beginning + * of pdadc table in calibration + */ + int8_t pwrTableOffset; + u8 params_for_tuning_caps[2]; + /* + * bit0 - enable tx temp comp + * bit1 - enable tx volt comp + * bit2 - enable fastClock - default to 1 + * bit3 - enable doubling - default to 1 + * bit4 - enable internal regulator - default to 1 + */ + u8 featureEnable; + /* misc flags: bit0 - turn down drivestrength */ + u8 miscConfiguration; + u8 eepromWriteEnableGpio; + u8 wlanDisableGpio; + u8 wlanLedGpio; + u8 rxBandSelectGpio; + u8 txrxgain; + /* SW controlled internal regulator fields */ + __le32 swreg; +} __packed; + +struct ar9300_modal_eep_header { + /* 4 idle, t1, t2, b (4 bits per setting) */ + __le32 antCtrlCommon; + /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ + __le32 antCtrlCommon2; + /* 6 idle, t, r, rx1, rx12, b (2 bits each) */ + __le16 antCtrlChain[AR9300_MAX_CHAINS]; + /* 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ + u8 xatten1DB[AR9300_MAX_CHAINS]; + /* 3 xatten1_margin for merlin (0xa20c/b20c 16:12 */ + u8 xatten1Margin[AR9300_MAX_CHAINS]; + int8_t tempSlope; + int8_t voltSlope; + /* spur channels in usual fbin coding format */ + u8 spurChans[AR_EEPROM_MODAL_SPURS]; + /* 3 Check if the register is per chain */ + int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS]; + u8 reserved[11]; + int8_t quick_drop; + u8 xpaBiasLvl; + u8 txFrameToDataStart; + u8 txFrameToPaOn; + u8 txClip; + int8_t antennaGain; + u8 switchSettling; + int8_t adcDesiredSize; + u8 txEndToXpaOff; + u8 txEndToRxOn; + u8 txFrameToXpaOn; + u8 thresh62; + __le32 papdRateMaskHt20; + __le32 papdRateMaskHt40; + __le16 switchcomspdt; + u8 xlna_bias_strength; + u8 futureModal[7]; +} __packed; + +struct ar9300_cal_data_per_freq_op_loop { + int8_t refPower; + /* pdadc voltage at power measurement */ + u8 voltMeas; + /* pcdac used for power measurement */ + u8 tempMeas; + /* range is -60 to -127 create a mapping equation 1db resolution */ + int8_t rxNoisefloorCal; + /*range is same as noisefloor */ + int8_t rxNoisefloorPower; + /* temp measured when noisefloor cal was performed */ + u8 rxTempMeas; +} __packed; + +struct cal_tgt_pow_legacy { + u8 tPow2x[4]; +} __packed; + +struct cal_tgt_pow_ht { + u8 tPow2x[14]; +} __packed; + +struct cal_ctl_data_2g { + u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G]; +} __packed; + +struct cal_ctl_data_5g { + u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G]; +} __packed; + +#define MAX_BASE_EXTENSION_FUTURE 2 + +struct ar9300_BaseExtension_1 { + u8 ant_div_control; + u8 future[MAX_BASE_EXTENSION_FUTURE]; + /* + * misc_enable: + * + * BIT 0 - TX Gain Cap enable. + * BIT 1 - Uncompressed Checksum enable. + * BIT 2/3 - MinCCApwr enable 2g/5g. + */ + u8 misc_enable; + int8_t tempslopextension[8]; + int8_t quick_drop_low; + int8_t quick_drop_high; +} __packed; + +struct ar9300_BaseExtension_2 { + int8_t tempSlopeLow; + int8_t tempSlopeHigh; + u8 xatten1DBLow[AR9300_MAX_CHAINS]; + u8 xatten1MarginLow[AR9300_MAX_CHAINS]; + u8 xatten1DBHigh[AR9300_MAX_CHAINS]; + u8 xatten1MarginHigh[AR9300_MAX_CHAINS]; +} __packed; + +struct ar9300_eeprom { + u8 eepromVersion; + u8 templateVersion; + u8 macAddr[6]; + u8 custData[AR9300_CUSTOMER_DATA_SIZE]; + + struct ar9300_base_eep_hdr baseEepHeader; + + struct ar9300_modal_eep_header modalHeader2G; + struct ar9300_BaseExtension_1 base_ext1; + u8 calFreqPier2G[AR9300_NUM_2G_CAL_PIERS]; + struct ar9300_cal_data_per_freq_op_loop + calPierData2G[AR9300_MAX_CHAINS][AR9300_NUM_2G_CAL_PIERS]; + u8 calTarget_freqbin_Cck[AR9300_NUM_2G_CCK_TARGET_POWERS]; + u8 calTarget_freqbin_2G[AR9300_NUM_2G_20_TARGET_POWERS]; + u8 calTarget_freqbin_2GHT20[AR9300_NUM_2G_20_TARGET_POWERS]; + u8 calTarget_freqbin_2GHT40[AR9300_NUM_2G_40_TARGET_POWERS]; + struct cal_tgt_pow_legacy + calTargetPowerCck[AR9300_NUM_2G_CCK_TARGET_POWERS]; + struct cal_tgt_pow_legacy + calTargetPower2G[AR9300_NUM_2G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower2GHT20[AR9300_NUM_2G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower2GHT40[AR9300_NUM_2G_40_TARGET_POWERS]; + u8 ctlIndex_2G[AR9300_NUM_CTLS_2G]; + u8 ctl_freqbin_2G[AR9300_NUM_CTLS_2G][AR9300_NUM_BAND_EDGES_2G]; + struct cal_ctl_data_2g ctlPowerData_2G[AR9300_NUM_CTLS_2G]; + struct ar9300_modal_eep_header modalHeader5G; + struct ar9300_BaseExtension_2 base_ext2; + u8 calFreqPier5G[AR9300_NUM_5G_CAL_PIERS]; + struct ar9300_cal_data_per_freq_op_loop + calPierData5G[AR9300_MAX_CHAINS][AR9300_NUM_5G_CAL_PIERS]; + u8 calTarget_freqbin_5G[AR9300_NUM_5G_20_TARGET_POWERS]; + u8 calTarget_freqbin_5GHT20[AR9300_NUM_5G_20_TARGET_POWERS]; + u8 calTarget_freqbin_5GHT40[AR9300_NUM_5G_40_TARGET_POWERS]; + struct cal_tgt_pow_legacy + calTargetPower5G[AR9300_NUM_5G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower5GHT20[AR9300_NUM_5G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower5GHT40[AR9300_NUM_5G_40_TARGET_POWERS]; + u8 ctlIndex_5G[AR9300_NUM_CTLS_5G]; + u8 ctl_freqbin_5G[AR9300_NUM_CTLS_5G][AR9300_NUM_BAND_EDGES_5G]; + struct cal_ctl_data_5g ctlPowerData_5G[AR9300_NUM_CTLS_5G]; +} __packed; + +s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah); +s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah); +u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz); +u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz); + +u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz); + +u32 ar9003_get_paprd_rate_mask_ht20(struct ath_hw *ah, bool is2ghz); +u32 ar9003_get_paprd_rate_mask_ht40(struct ath_hw *ah, bool is2ghz); +unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah, + struct ath9k_channel *chan); + +void ar9003_hw_internal_regulator_apply(struct ath_hw *ah); +int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray); + +#endif -- cgit v1.2.3