From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/broadcom/b43/phy_ht.h | 142 +++++++++++++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 drivers/net/wireless/broadcom/b43/phy_ht.h (limited to 'drivers/net/wireless/broadcom/b43/phy_ht.h') diff --git a/drivers/net/wireless/broadcom/b43/phy_ht.h b/drivers/net/wireless/broadcom/b43/phy_ht.h new file mode 100644 index 000000000..046753857 --- /dev/null +++ b/drivers/net/wireless/broadcom/b43/phy_ht.h @@ -0,0 +1,142 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef B43_PHY_HT_H_ +#define B43_PHY_HT_H_ + +#include "phy_common.h" + + +#define B43_PHY_HT_BBCFG 0x001 /* BB config */ +#define B43_PHY_HT_BBCFG_RSTCCA 0x4000 /* Reset CCA */ +#define B43_PHY_HT_BBCFG_RSTRX 0x8000 /* Reset RX */ +#define B43_PHY_HT_BANDCTL 0x009 /* Band control */ +#define B43_PHY_HT_BANDCTL_5GHZ 0x0001 /* Use the 5GHz band */ +#define B43_PHY_HT_TABLE_ADDR 0x072 /* Table address */ +#define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */ +#define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */ +#define B43_PHY_HT_CLASS_CTL 0x0B0 /* Classifier control */ +#define B43_PHY_HT_CLASS_CTL_CCK_EN 0x0001 /* CCK enable */ +#define B43_PHY_HT_CLASS_CTL_OFDM_EN 0x0002 /* OFDM enable */ +#define B43_PHY_HT_CLASS_CTL_WAITED_EN 0x0004 /* Waited enable */ +#define B43_PHY_HT_IQLOCAL_CMDGCTL 0x0C2 /* I/Q LO cal command G control */ +#define B43_PHY_HT_SAMP_CMD 0x0C3 /* Sample command */ +#define B43_PHY_HT_SAMP_CMD_STOP 0x0002 /* Stop */ +#define B43_PHY_HT_SAMP_LOOP_CNT 0x0C4 /* Sample loop count */ +#define B43_PHY_HT_SAMP_WAIT_CNT 0x0C5 /* Sample wait count */ +#define B43_PHY_HT_SAMP_DEP_CNT 0x0C6 /* Sample depth count */ +#define B43_PHY_HT_SAMP_STAT 0x0C7 /* Sample status */ +#define B43_PHY_HT_EST_PWR_C1 0x118 +#define B43_PHY_HT_EST_PWR_C2 0x119 +#define B43_PHY_HT_EST_PWR_C3 0x11A +#define B43_PHY_HT_TSSIMODE 0x122 /* TSSI mode */ +#define B43_PHY_HT_TSSIMODE_EN 0x0001 /* TSSI enable */ +#define B43_PHY_HT_TSSIMODE_PDEN 0x0002 /* Power det enable */ +#define B43_PHY_HT_BW1 0x1CE +#define B43_PHY_HT_BW2 0x1CF +#define B43_PHY_HT_BW3 0x1D0 +#define B43_PHY_HT_BW4 0x1D1 +#define B43_PHY_HT_BW5 0x1D2 +#define B43_PHY_HT_BW6 0x1D3 +#define B43_PHY_HT_TXPCTL_CMD_C1 0x1E7 /* TX power control command */ +#define B43_PHY_HT_TXPCTL_CMD_C1_INIT 0x007F /* Init */ +#define B43_PHY_HT_TXPCTL_CMD_C1_COEFF 0x2000 /* Power control coefficients */ +#define B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN 0x4000 /* Hardware TX power control enable */ +#define B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN 0x8000 /* TX power control enable */ +#define B43_PHY_HT_TXPCTL_N 0x1E8 /* TX power control N num */ +#define B43_PHY_HT_TXPCTL_N_TSSID 0x00FF /* N TSSI delay */ +#define B43_PHY_HT_TXPCTL_N_TSSID_SHIFT 0 +#define B43_PHY_HT_TXPCTL_N_NPTIL2 0x0700 /* N PT integer log2 */ +#define B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT 8 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI 0x1E9 /* TX power control idle TSSI */ +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1 0x003F +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT 0 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2 0x3F00 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT 8 +#define B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF 0x8000 /* Raw TSSI offset bin format */ +#define B43_PHY_HT_TXPCTL_TARG_PWR 0x1EA /* TX power control target power */ +#define B43_PHY_HT_TXPCTL_TARG_PWR_C1 0x00FF /* Power 0 */ +#define B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT 0 +#define B43_PHY_HT_TXPCTL_TARG_PWR_C2 0xFF00 /* Power 1 */ +#define B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT 8 +#define B43_PHY_HT_TX_PCTL_STATUS_C1 0x1ED +#define B43_PHY_HT_TX_PCTL_STATUS_C2 0x1EE +#define B43_PHY_HT_TXPCTL_CMD_C2 0x222 +#define B43_PHY_HT_TXPCTL_CMD_C2_INIT 0x007F +#define B43_PHY_HT_RSSI_C1 0x219 +#define B43_PHY_HT_RSSI_C2 0x21A +#define B43_PHY_HT_RSSI_C3 0x21B + +#define B43_PHY_HT_C1_CLIP1THRES B43_PHY_OFDM(0x00E) +#define B43_PHY_HT_C2_CLIP1THRES B43_PHY_OFDM(0x04E) +#define B43_PHY_HT_C3_CLIP1THRES B43_PHY_OFDM(0x08E) + +#define B43_PHY_HT_RF_SEQ_MODE B43_PHY_EXTG(0x000) +#define B43_PHY_HT_RF_SEQ_MODE_CA_OVER 0x0001 /* Core active override */ +#define B43_PHY_HT_RF_SEQ_MODE_TR_OVER 0x0002 /* Trigger override */ +#define B43_PHY_HT_RF_SEQ_TRIG B43_PHY_EXTG(0x003) +#define B43_PHY_HT_RF_SEQ_TRIG_RX2TX 0x0001 /* RX2TX */ +#define B43_PHY_HT_RF_SEQ_TRIG_TX2RX 0x0002 /* TX2RX */ +#define B43_PHY_HT_RF_SEQ_TRIG_UPGH 0x0004 /* Update gain H */ +#define B43_PHY_HT_RF_SEQ_TRIG_UPGL 0x0008 /* Update gain L */ +#define B43_PHY_HT_RF_SEQ_TRIG_UPGU 0x0010 /* Update gain U */ +#define B43_PHY_HT_RF_SEQ_TRIG_RST2RX 0x0020 /* Reset to RX */ +#define B43_PHY_HT_RF_SEQ_STATUS B43_PHY_EXTG(0x004) +/* Values for the status are the same as for the trigger */ + +#define B43_PHY_HT_RF_CTL_CMD 0x810 +#define B43_PHY_HT_RF_CTL_CMD_FORCE 0x0001 +#define B43_PHY_HT_RF_CTL_CMD_CHIP0_PU 0x0002 + +#define B43_PHY_HT_RF_CTL_INT_C1 B43_PHY_EXTG(0x04c) +#define B43_PHY_HT_RF_CTL_INT_C2 B43_PHY_EXTG(0x06c) +#define B43_PHY_HT_RF_CTL_INT_C3 B43_PHY_EXTG(0x08c) + +#define B43_PHY_HT_AFE_C1_OVER B43_PHY_EXTG(0x110) +#define B43_PHY_HT_AFE_C1 B43_PHY_EXTG(0x111) +#define B43_PHY_HT_AFE_C2_OVER B43_PHY_EXTG(0x114) +#define B43_PHY_HT_AFE_C2 B43_PHY_EXTG(0x115) +#define B43_PHY_HT_AFE_C3_OVER B43_PHY_EXTG(0x118) +#define B43_PHY_HT_AFE_C3 B43_PHY_EXTG(0x119) + +#define B43_PHY_HT_TXPCTL_CMD_C3 B43_PHY_EXTG(0x164) +#define B43_PHY_HT_TXPCTL_CMD_C3_INIT 0x007F +#define B43_PHY_HT_TXPCTL_IDLE_TSSI2 B43_PHY_EXTG(0x165) /* TX power control idle TSSI */ +#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3 0x003F +#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT 0 +#define B43_PHY_HT_TXPCTL_TARG_PWR2 B43_PHY_EXTG(0x166) /* TX power control target power */ +#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3 0x00FF +#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT 0 +#define B43_PHY_HT_TX_PCTL_STATUS_C3 B43_PHY_EXTG(0x169) + +#define B43_PHY_B_BBCFG B43_PHY_N_BMODE(0x001) +#define B43_PHY_B_BBCFG_RSTCCA 0x4000 /* Reset CCA */ +#define B43_PHY_B_BBCFG_RSTRX 0x8000 /* Reset RX */ +#define B43_PHY_HT_TEST B43_PHY_N_BMODE(0x00A) + + +/* Values for PHY registers used on channel switching */ +struct b43_phy_ht_channeltab_e_phy { + u16 bw1; + u16 bw2; + u16 bw3; + u16 bw4; + u16 bw5; + u16 bw6; +}; + + +struct b43_phy_ht { + u16 rf_ctl_int_save[3]; + + bool tx_pwr_ctl; + u8 tx_pwr_idx[3]; + + s32 bb_mult_save[3]; + + u8 idle_tssi[3]; +}; + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_ht; + +#endif /* B43_PHY_HT_H_ */ -- cgit v1.2.3