From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 519 +++++++++++++++++++++++++ 1 file changed, 519 insertions(+) create mode 100644 drivers/net/wireless/intel/ipw2x00/libipw_tx.c (limited to 'drivers/net/wireless/intel/ipw2x00/libipw_tx.c') diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c new file mode 100644 index 000000000..4aec1fce1 --- /dev/null +++ b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c @@ -0,0 +1,519 @@ +// SPDX-License-Identifier: GPL-2.0-only +/****************************************************************************** + + Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. + + + Contact Information: + Intel Linux Wireless + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +******************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libipw.h" + +/* + +802.11 Data Frame + + ,-------------------------------------------------------------------. +Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 | + |------|------|---------|---------|---------|------|---------|------| +Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | Frame | fcs | + | | tion | (BSSID) | | | ence | data | | + `--------------------------------------------------| |------' +Total: 28 non-data bytes `----.----' + | + .- 'Frame data' expands, if WEP enabled, to <----------' + | + V + ,-----------------------. +Bytes | 4 | 0-2296 | 4 | + |-----|-----------|-----| +Desc. | IV | Encrypted | ICV | + | | Packet | | + `-----| |-----' + `-----.-----' + | + .- 'Encrypted Packet' expands to + | + V + ,---------------------------------------------------. +Bytes | 1 | 1 | 1 | 3 | 2 | 0-2304 | + |------|------|---------|----------|------|---------| +Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP | + | DSAP | SSAP | | | | Packet | + | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8| | | + `---------------------------------------------------- +Total: 8 non-data bytes + +802.3 Ethernet Data Frame + + ,-----------------------------------------. +Bytes | 6 | 6 | 2 | Variable | 4 | + |-------|-------|------|-----------|------| +Desc. | Dest. | Source| Type | IP Packet | fcs | + | MAC | MAC | | | | + `-----------------------------------------' +Total: 18 non-data bytes + +In the event that fragmentation is required, the incoming payload is split into +N parts of size ieee->fts. The first fragment contains the SNAP header and the +remaining packets are just data. + +If encryption is enabled, each fragment payload size is reduced by enough space +to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP) +So if you have 1500 bytes of payload with ieee->fts set to 500 without +encryption it will take 3 frames. With WEP it will take 4 frames as the +payload of each frame is reduced to 492 bytes. + +* SKB visualization +* +* ,- skb->data +* | +* | ETHERNET HEADER ,-<-- PAYLOAD +* | | 14 bytes from skb->data +* | 2 bytes for Type --> ,T. | (sizeof ethhdr) +* | | | | +* |,-Dest.--. ,--Src.---. | | | +* | 6 bytes| | 6 bytes | | | | +* v | | | | | | +* 0 | v 1 | v | v 2 +* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +* ^ | ^ | ^ | +* | | | | | | +* | | | | `T' <---- 2 bytes for Type +* | | | | +* | | '---SNAP--' <-------- 6 bytes for SNAP +* | | +* `-IV--' <-------------------- 4 bytes for IV (WEP) +* +* SNAP HEADER +* +*/ + +static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 }; +static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 }; + +static int libipw_copy_snap(u8 * data, __be16 h_proto) +{ + struct libipw_snap_hdr *snap; + u8 *oui; + + snap = (struct libipw_snap_hdr *)data; + snap->dsap = 0xaa; + snap->ssap = 0xaa; + snap->ctrl = 0x03; + + if (h_proto == htons(ETH_P_AARP) || h_proto == htons(ETH_P_IPX)) + oui = P802_1H_OUI; + else + oui = RFC1042_OUI; + snap->oui[0] = oui[0]; + snap->oui[1] = oui[1]; + snap->oui[2] = oui[2]; + + memcpy(data + SNAP_SIZE, &h_proto, sizeof(u16)); + + return SNAP_SIZE + sizeof(u16); +} + +static int libipw_encrypt_fragment(struct libipw_device *ieee, + struct sk_buff *frag, int hdr_len) +{ + struct lib80211_crypt_data *crypt = + ieee->crypt_info.crypt[ieee->crypt_info.tx_keyidx]; + int res; + + if (crypt == NULL) + return -1; + + /* To encrypt, frame format is: + * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */ + atomic_inc(&crypt->refcnt); + res = 0; + if (crypt->ops && crypt->ops->encrypt_mpdu) + res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv); + + atomic_dec(&crypt->refcnt); + if (res < 0) { + printk(KERN_INFO "%s: Encryption failed: len=%d.\n", + ieee->dev->name, frag->len); + ieee->ieee_stats.tx_discards++; + return -1; + } + + return 0; +} + +void libipw_txb_free(struct libipw_txb *txb) +{ + int i; + if (unlikely(!txb)) + return; + for (i = 0; i < txb->nr_frags; i++) + if (txb->fragments[i]) + dev_kfree_skb_any(txb->fragments[i]); + kfree(txb); +} + +static struct libipw_txb *libipw_alloc_txb(int nr_frags, int txb_size, + int headroom, gfp_t gfp_mask) +{ + struct libipw_txb *txb; + int i; + + txb = kmalloc(struct_size(txb, fragments, nr_frags), gfp_mask); + if (!txb) + return NULL; + + memset(txb, 0, sizeof(struct libipw_txb)); + txb->nr_frags = nr_frags; + txb->frag_size = txb_size; + + for (i = 0; i < nr_frags; i++) { + txb->fragments[i] = __dev_alloc_skb(txb_size + headroom, + gfp_mask); + if (unlikely(!txb->fragments[i])) { + i--; + break; + } + skb_reserve(txb->fragments[i], headroom); + } + if (unlikely(i != nr_frags)) { + while (i >= 0) + dev_kfree_skb_any(txb->fragments[i--]); + kfree(txb); + return NULL; + } + return txb; +} + +static int libipw_classify(struct sk_buff *skb) +{ + struct ethhdr *eth; + struct iphdr *ip; + + eth = (struct ethhdr *)skb->data; + if (eth->h_proto != htons(ETH_P_IP)) + return 0; + + ip = ip_hdr(skb); + switch (ip->tos & 0xfc) { + case 0x20: + return 2; + case 0x40: + return 1; + case 0x60: + return 3; + case 0x80: + return 4; + case 0xa0: + return 5; + case 0xc0: + return 6; + case 0xe0: + return 7; + default: + return 0; + } +} + +/* Incoming skb is converted to a txb which consists of + * a block of 802.11 fragment packets (stored as skbs) */ +netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct libipw_device *ieee = netdev_priv(dev); + struct libipw_txb *txb = NULL; + struct libipw_hdr_3addrqos *frag_hdr; + int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size, + rts_required; + unsigned long flags; + int encrypt, host_encrypt, host_encrypt_msdu; + __be16 ether_type; + int bytes, fc, hdr_len; + struct sk_buff *skb_frag; + struct libipw_hdr_3addrqos header = {/* Ensure zero initialized */ + .duration_id = 0, + .seq_ctl = 0, + .qos_ctl = 0 + }; + u8 dest[ETH_ALEN], src[ETH_ALEN]; + struct lib80211_crypt_data *crypt; + int priority = skb->priority; + int snapped = 0; + + if (ieee->is_queue_full && (*ieee->is_queue_full) (dev, priority)) + return NETDEV_TX_BUSY; + + spin_lock_irqsave(&ieee->lock, flags); + + /* If there is no driver handler to take the TXB, dont' bother + * creating it... */ + if (!ieee->hard_start_xmit) { + printk(KERN_WARNING "%s: No xmit handler.\n", ieee->dev->name); + goto success; + } + + if (unlikely(skb->len < SNAP_SIZE + sizeof(u16))) { + printk(KERN_WARNING "%s: skb too small (%d).\n", + ieee->dev->name, skb->len); + goto success; + } + + ether_type = ((struct ethhdr *)skb->data)->h_proto; + + crypt = ieee->crypt_info.crypt[ieee->crypt_info.tx_keyidx]; + + encrypt = !(ether_type == htons(ETH_P_PAE) && ieee->ieee802_1x) && + ieee->sec.encrypt; + + host_encrypt = ieee->host_encrypt && encrypt && crypt; + host_encrypt_msdu = ieee->host_encrypt_msdu && encrypt && crypt; + + if (!encrypt && ieee->ieee802_1x && + ieee->drop_unencrypted && ether_type != htons(ETH_P_PAE)) { + dev->stats.tx_dropped++; + goto success; + } + + /* Save source and destination addresses */ + skb_copy_from_linear_data(skb, dest, ETH_ALEN); + skb_copy_from_linear_data_offset(skb, ETH_ALEN, src, ETH_ALEN); + + if (host_encrypt) + fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA | + IEEE80211_FCTL_PROTECTED; + else + fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA; + + if (ieee->iw_mode == IW_MODE_INFRA) { + fc |= IEEE80211_FCTL_TODS; + /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */ + memcpy(header.addr1, ieee->bssid, ETH_ALEN); + memcpy(header.addr2, src, ETH_ALEN); + memcpy(header.addr3, dest, ETH_ALEN); + } else if (ieee->iw_mode == IW_MODE_ADHOC) { + /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */ + memcpy(header.addr1, dest, ETH_ALEN); + memcpy(header.addr2, src, ETH_ALEN); + memcpy(header.addr3, ieee->bssid, ETH_ALEN); + } + hdr_len = LIBIPW_3ADDR_LEN; + + if (ieee->is_qos_active && ieee->is_qos_active(dev, skb)) { + fc |= IEEE80211_STYPE_QOS_DATA; + hdr_len += 2; + + skb->priority = libipw_classify(skb); + header.qos_ctl |= cpu_to_le16(skb->priority & LIBIPW_QCTL_TID); + } + header.frame_ctl = cpu_to_le16(fc); + + /* Advance the SKB to the start of the payload */ + skb_pull(skb, sizeof(struct ethhdr)); + + /* Determine total amount of storage required for TXB packets */ + bytes = skb->len + SNAP_SIZE + sizeof(u16); + + /* Encrypt msdu first on the whole data packet. */ + if ((host_encrypt || host_encrypt_msdu) && + crypt && crypt->ops && crypt->ops->encrypt_msdu) { + int res = 0; + int len = bytes + hdr_len + crypt->ops->extra_msdu_prefix_len + + crypt->ops->extra_msdu_postfix_len; + struct sk_buff *skb_new = dev_alloc_skb(len); + + if (unlikely(!skb_new)) + goto failed; + + skb_reserve(skb_new, crypt->ops->extra_msdu_prefix_len); + skb_put_data(skb_new, &header, hdr_len); + snapped = 1; + libipw_copy_snap(skb_put(skb_new, SNAP_SIZE + sizeof(u16)), + ether_type); + skb_copy_from_linear_data(skb, skb_put(skb_new, skb->len), skb->len); + res = crypt->ops->encrypt_msdu(skb_new, hdr_len, crypt->priv); + if (res < 0) { + LIBIPW_ERROR("msdu encryption failed\n"); + dev_kfree_skb_any(skb_new); + goto failed; + } + dev_kfree_skb_any(skb); + skb = skb_new; + bytes += crypt->ops->extra_msdu_prefix_len + + crypt->ops->extra_msdu_postfix_len; + skb_pull(skb, hdr_len); + } + + if (host_encrypt || ieee->host_open_frag) { + /* Determine fragmentation size based on destination (multicast + * and broadcast are not fragmented) */ + if (is_multicast_ether_addr(dest) || + is_broadcast_ether_addr(dest)) + frag_size = MAX_FRAG_THRESHOLD; + else + frag_size = ieee->fts; + + /* Determine amount of payload per fragment. Regardless of if + * this stack is providing the full 802.11 header, one will + * eventually be affixed to this fragment -- so we must account + * for it when determining the amount of payload space. */ + bytes_per_frag = frag_size - hdr_len; + if (ieee->config & + (CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS)) + bytes_per_frag -= LIBIPW_FCS_LEN; + + /* Each fragment may need to have room for encryption + * pre/postfix */ + if (host_encrypt && crypt && crypt->ops) + bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len + + crypt->ops->extra_mpdu_postfix_len; + + /* Number of fragments is the total + * bytes_per_frag / payload_per_fragment */ + nr_frags = bytes / bytes_per_frag; + bytes_last_frag = bytes % bytes_per_frag; + if (bytes_last_frag) + nr_frags++; + else + bytes_last_frag = bytes_per_frag; + } else { + nr_frags = 1; + bytes_per_frag = bytes_last_frag = bytes; + frag_size = bytes + hdr_len; + } + + rts_required = (frag_size > ieee->rts + && ieee->config & CFG_LIBIPW_RTS); + if (rts_required) + nr_frags++; + + /* When we allocate the TXB we allocate enough space for the reserve + * and full fragment bytes (bytes_per_frag doesn't include prefix, + * postfix, header, FCS, etc.) */ + txb = libipw_alloc_txb(nr_frags, frag_size, + ieee->tx_headroom, GFP_ATOMIC); + if (unlikely(!txb)) { + printk(KERN_WARNING "%s: Could not allocate TXB\n", + ieee->dev->name); + goto failed; + } + txb->encrypted = encrypt; + if (host_encrypt) + txb->payload_size = frag_size * (nr_frags - 1) + + bytes_last_frag; + else + txb->payload_size = bytes; + + if (rts_required) { + skb_frag = txb->fragments[0]; + frag_hdr = skb_put(skb_frag, hdr_len); + + /* + * Set header frame_ctl to the RTS. + */ + header.frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); + memcpy(frag_hdr, &header, hdr_len); + + /* + * Restore header frame_ctl to the original data setting. + */ + header.frame_ctl = cpu_to_le16(fc); + + if (ieee->config & + (CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS)) + skb_put(skb_frag, 4); + + txb->rts_included = 1; + i = 1; + } else + i = 0; + + for (; i < nr_frags; i++) { + skb_frag = txb->fragments[i]; + + if (host_encrypt) + skb_reserve(skb_frag, + crypt->ops->extra_mpdu_prefix_len); + + frag_hdr = skb_put_data(skb_frag, &header, hdr_len); + + /* If this is not the last fragment, then add the MOREFRAGS + * bit to the frame control */ + if (i != nr_frags - 1) { + frag_hdr->frame_ctl = + cpu_to_le16(fc | IEEE80211_FCTL_MOREFRAGS); + bytes = bytes_per_frag; + } else { + /* The last fragment takes the remaining length */ + bytes = bytes_last_frag; + } + + if (i == 0 && !snapped) { + libipw_copy_snap(skb_put + (skb_frag, SNAP_SIZE + sizeof(u16)), + ether_type); + bytes -= SNAP_SIZE + sizeof(u16); + } + + skb_copy_from_linear_data(skb, skb_put(skb_frag, bytes), bytes); + + /* Advance the SKB... */ + skb_pull(skb, bytes); + + /* Encryption routine will move the header forward in order + * to insert the IV between the header and the payload */ + if (host_encrypt) + libipw_encrypt_fragment(ieee, skb_frag, hdr_len); + + if (ieee->config & + (CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS)) + skb_put(skb_frag, 4); + } + + success: + spin_unlock_irqrestore(&ieee->lock, flags); + + dev_kfree_skb_any(skb); + + if (txb) { + netdev_tx_t ret = (*ieee->hard_start_xmit)(txb, dev, priority); + if (ret == NETDEV_TX_OK) { + dev->stats.tx_packets++; + dev->stats.tx_bytes += txb->payload_size; + return NETDEV_TX_OK; + } + + libipw_txb_free(txb); + } + + return NETDEV_TX_OK; + + failed: + spin_unlock_irqrestore(&ieee->lock, flags); + netif_stop_queue(dev); + dev->stats.tx_errors++; + return NETDEV_TX_BUSY; +} +EXPORT_SYMBOL(libipw_xmit); + +EXPORT_SYMBOL(libipw_txb_free); -- cgit v1.2.3