From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/intel/iwlwifi/dvm/rs.h | 402 ++++++++++++++++++++++++++++ 1 file changed, 402 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/dvm/rs.h (limited to 'drivers/net/wireless/intel/iwlwifi/dvm/rs.h') diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/rs.h b/drivers/net/wireless/intel/iwlwifi/dvm/rs.h new file mode 100644 index 000000000..0b47f1993 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/dvm/rs.h @@ -0,0 +1,402 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/****************************************************************************** + * + * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. + *****************************************************************************/ + +#ifndef __iwl_agn_rs_h__ +#define __iwl_agn_rs_h__ + +#include + +#include "iwl-config.h" + +#include "commands.h" + +struct iwl_rate_info { + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ +}; + +/* + * These serve as indexes into + * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + */ +enum { + IWL_RATE_1M_INDEX = 0, + IWL_RATE_2M_INDEX, + IWL_RATE_5M_INDEX, + IWL_RATE_11M_INDEX, + IWL_RATE_6M_INDEX, + IWL_RATE_9M_INDEX, + IWL_RATE_12M_INDEX, + IWL_RATE_18M_INDEX, + IWL_RATE_24M_INDEX, + IWL_RATE_36M_INDEX, + IWL_RATE_48M_INDEX, + IWL_RATE_54M_INDEX, + IWL_RATE_60M_INDEX, + IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ + IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */ + IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, + IWL_RATE_INVALID = IWL_RATE_COUNT, +}; + +enum { + IWL_RATE_6M_INDEX_TABLE = 0, + IWL_RATE_9M_INDEX_TABLE, + IWL_RATE_12M_INDEX_TABLE, + IWL_RATE_18M_INDEX_TABLE, + IWL_RATE_24M_INDEX_TABLE, + IWL_RATE_36M_INDEX_TABLE, + IWL_RATE_48M_INDEX_TABLE, + IWL_RATE_54M_INDEX_TABLE, + IWL_RATE_1M_INDEX_TABLE, + IWL_RATE_2M_INDEX_TABLE, + IWL_RATE_5M_INDEX_TABLE, + IWL_RATE_11M_INDEX_TABLE, + IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1, +}; + +enum { + IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, + IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, + IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, + IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, +}; + +/* #define vs. enum to keep from defaulting to 'large integer' */ +#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) +#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) +#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) +#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) +#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) +#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) +#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) +#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) +#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) +#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) +#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) +#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) +#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) + +/* uCode API values for legacy bit rates, both OFDM and CCK */ +enum { + IWL_RATE_6M_PLCP = 13, + IWL_RATE_9M_PLCP = 15, + IWL_RATE_12M_PLCP = 5, + IWL_RATE_18M_PLCP = 7, + IWL_RATE_24M_PLCP = 9, + IWL_RATE_36M_PLCP = 11, + IWL_RATE_48M_PLCP = 1, + IWL_RATE_54M_PLCP = 3, + IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/ + IWL_RATE_1M_PLCP = 10, + IWL_RATE_2M_PLCP = 20, + IWL_RATE_5M_PLCP = 55, + IWL_RATE_11M_PLCP = 110, + /*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */ + /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ +}; + +/* uCode API values for OFDM high-throughput (HT) bit rates */ +enum { + IWL_RATE_SISO_6M_PLCP = 0, + IWL_RATE_SISO_12M_PLCP = 1, + IWL_RATE_SISO_18M_PLCP = 2, + IWL_RATE_SISO_24M_PLCP = 3, + IWL_RATE_SISO_36M_PLCP = 4, + IWL_RATE_SISO_48M_PLCP = 5, + IWL_RATE_SISO_54M_PLCP = 6, + IWL_RATE_SISO_60M_PLCP = 7, + IWL_RATE_MIMO2_6M_PLCP = 0x8, + IWL_RATE_MIMO2_12M_PLCP = 0x9, + IWL_RATE_MIMO2_18M_PLCP = 0xa, + IWL_RATE_MIMO2_24M_PLCP = 0xb, + IWL_RATE_MIMO2_36M_PLCP = 0xc, + IWL_RATE_MIMO2_48M_PLCP = 0xd, + IWL_RATE_MIMO2_54M_PLCP = 0xe, + IWL_RATE_MIMO2_60M_PLCP = 0xf, + IWL_RATE_MIMO3_6M_PLCP = 0x10, + IWL_RATE_MIMO3_12M_PLCP = 0x11, + IWL_RATE_MIMO3_18M_PLCP = 0x12, + IWL_RATE_MIMO3_24M_PLCP = 0x13, + IWL_RATE_MIMO3_36M_PLCP = 0x14, + IWL_RATE_MIMO3_48M_PLCP = 0x15, + IWL_RATE_MIMO3_54M_PLCP = 0x16, + IWL_RATE_MIMO3_60M_PLCP = 0x17, + IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, +}; + +/* MAC header values for bit rates */ +enum { + IWL_RATE_6M_IEEE = 12, + IWL_RATE_9M_IEEE = 18, + IWL_RATE_12M_IEEE = 24, + IWL_RATE_18M_IEEE = 36, + IWL_RATE_24M_IEEE = 48, + IWL_RATE_36M_IEEE = 72, + IWL_RATE_48M_IEEE = 96, + IWL_RATE_54M_IEEE = 108, + IWL_RATE_60M_IEEE = 120, + IWL_RATE_1M_IEEE = 2, + IWL_RATE_2M_IEEE = 4, + IWL_RATE_5M_IEEE = 11, + IWL_RATE_11M_IEEE = 22, +}; + +#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) + +#define IWL_INVALID_VALUE -1 + +#define IWL_MIN_RSSI_VAL -100 +#define IWL_MAX_RSSI_VAL 0 + +/* These values specify how many Tx frame attempts before + * searching for a new modulation mode */ +#define IWL_LEGACY_FAILURE_LIMIT 160 +#define IWL_LEGACY_SUCCESS_LIMIT 480 +#define IWL_LEGACY_TABLE_COUNT 160 + +#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 +#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 +#define IWL_NONE_LEGACY_TABLE_COUNT 1500 + +/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ +#define IWL_RS_GOOD_RATIO 12800 /* 100% */ +#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ +#define IWL_RATE_HIGH_TH 10880 /* 85% */ +#define IWL_RATE_INCREASE_TH 6400 /* 50% */ +#define IWL_RATE_DECREASE_TH 1920 /* 15% */ + +/* possible actions when in legacy mode */ +#define IWL_LEGACY_SWITCH_ANTENNA1 0 +#define IWL_LEGACY_SWITCH_ANTENNA2 1 +#define IWL_LEGACY_SWITCH_SISO 2 +#define IWL_LEGACY_SWITCH_MIMO2_AB 3 +#define IWL_LEGACY_SWITCH_MIMO2_AC 4 +#define IWL_LEGACY_SWITCH_MIMO2_BC 5 +#define IWL_LEGACY_SWITCH_MIMO3_ABC 6 + +/* possible actions when in siso mode */ +#define IWL_SISO_SWITCH_ANTENNA1 0 +#define IWL_SISO_SWITCH_ANTENNA2 1 +#define IWL_SISO_SWITCH_MIMO2_AB 2 +#define IWL_SISO_SWITCH_MIMO2_AC 3 +#define IWL_SISO_SWITCH_MIMO2_BC 4 +#define IWL_SISO_SWITCH_GI 5 +#define IWL_SISO_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo mode */ +#define IWL_MIMO2_SWITCH_ANTENNA1 0 +#define IWL_MIMO2_SWITCH_ANTENNA2 1 +#define IWL_MIMO2_SWITCH_SISO_A 2 +#define IWL_MIMO2_SWITCH_SISO_B 3 +#define IWL_MIMO2_SWITCH_SISO_C 4 +#define IWL_MIMO2_SWITCH_GI 5 +#define IWL_MIMO2_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo3 mode */ +#define IWL_MIMO3_SWITCH_ANTENNA1 0 +#define IWL_MIMO3_SWITCH_ANTENNA2 1 +#define IWL_MIMO3_SWITCH_SISO_A 2 +#define IWL_MIMO3_SWITCH_SISO_B 3 +#define IWL_MIMO3_SWITCH_SISO_C 4 +#define IWL_MIMO3_SWITCH_MIMO2_AB 5 +#define IWL_MIMO3_SWITCH_MIMO2_AC 6 +#define IWL_MIMO3_SWITCH_MIMO2_BC 7 +#define IWL_MIMO3_SWITCH_GI 8 + + +#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI +#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC + +/*FIXME:RS:add possible actions for MIMO3*/ + +#define IWL_ACTION_LIMIT 3 /* # possible actions */ + +#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ + +/* load per tid defines for A-MPDU activation */ +#define IWL_AGG_TPT_THREHOLD 0 +#define IWL_AGG_LOAD_THRESHOLD 10 +#define IWL_AGG_ALL_TID 0xff +#define TID_QUEUE_CELL_SPACING 50 /*mS */ +#define TID_QUEUE_MAX_SIZE 20 +#define TID_ROUND_VALUE 5 /* mS */ + +#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) +#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) + +extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; + +enum iwl_table_type { + LQ_NONE, + LQ_G, /* legacy types */ + LQ_A, + LQ_SISO, /* high-throughput types */ + LQ_MIMO2, + LQ_MIMO3, + LQ_MAX, +}; + +#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) +#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) +#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define IWL_MAX_MCS_DISPLAY_SIZE 12 + +struct iwl_rate_mcs_info { + char mbps[IWL_MAX_MCS_DISPLAY_SIZE]; + char mcs[IWL_MAX_MCS_DISPLAY_SIZE]; +}; + +/** + * struct iwl_rate_scale_data -- tx success history for one rate + */ +struct iwl_rate_scale_data { + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ + unsigned long stamp; +}; + +/** + * struct iwl_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct iwl_lq_sta, + * one for "active", and one for "search". + */ +struct iwl_scale_tbl_info { + enum iwl_table_type lq_type; + u8 ant_type; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_ht40; /* 1 = 40 MHz channel width */ + u8 is_dup; /* 1 = duplicated data streams */ + u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ + u8 max_search; /* maximun number of tables we can search */ + const u16 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + u32 current_rate; /* rate_n_flags, uCode API format */ + struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ +}; + +struct iwl_traffic_load { + unsigned long time_stamp; /* age of the oldest statistics */ + u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time + * slice */ + u32 total; /* total num of packets during the + * last TID_MAX_TIME_DIFF */ + u8 queue_count; /* number of queues that has + * been used since the last cleanup */ + u8 head; /* start of the circular buffer */ +}; + +/** + * struct iwl_lq_sta -- driver's rate scaling private structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ +struct iwl_lq_sta { + u8 active_tbl; /* index of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ + s32 last_tpt; + + /* The following determine when to search for a new mode */ + u32 table_count_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ + u32 table_count; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u64 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ + u8 is_green; + u8 is_dup; + enum nl80211_band band; + + /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ + u32 supp_rates; + u16 active_legacy_rate; + u16 active_siso_rate; + u16 active_mimo2_rate; + u16 active_mimo3_rate; + s8 max_rate_idx; /* Max rate set by user */ + u8 missed_rate_counter; + + struct iwl_link_quality_cmd lq; + struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct iwl_traffic_load load[IWL_MAX_TID_COUNT]; + u8 tx_agg_tid_en; +#ifdef CONFIG_MAC80211_DEBUGFS + u32 dbg_fixed_rate; +#endif + struct iwl_priv *drv; + + /* used to be in sta_info */ + int last_txrate_idx; + /* last tx rate_n_flags */ + u32 last_rate_n_flags; + /* packets destined for this STA are aggregated */ + u8 is_agg; + /* BT traffic this sta was last updated in */ + u8 last_bt_traffic; +}; + +static inline u8 first_antenna(u8 mask) +{ + if (mask & ANT_A) + return ANT_A; + if (mask & ANT_B) + return ANT_B; + return ANT_C; +} + + +/* Initialize station's rate scaling information after adding station */ +void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, + u8 sta_id); + +/** + * iwl_rate_control_register - Register the rate control algorithm callbacks + * + * Since the rate control algorithm is hardware specific, there is no need + * or reason to place it as a stand alone module. The driver can call + * iwl_rate_control_register in order to register the rate control callbacks + * with the mac80211 subsystem. This should be performed prior to calling + * ieee80211_register_hw + * + */ +int iwlagn_rate_control_register(void); + +/** + * iwl_rate_control_unregister - Unregister the rate control callbacks + * + * This should be called after calling ieee80211_unregister_hw, but before + * the driver is unloaded. + */ +void iwlagn_rate_control_unregister(void); + +#endif /* __iwl_agn__rs__ */ -- cgit v1.2.3