From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/wireless/intel/iwlwifi/fw/api/datapath.h | 489 +++++++++++++++++++++ 1 file changed, 489 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/fw/api/datapath.h (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/datapath.h') diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/datapath.h b/drivers/net/wireless/intel/iwlwifi/fw/api/datapath.h new file mode 100644 index 000000000..8b38a0073 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/datapath.h @@ -0,0 +1,489 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (C) 2012-2014, 2018-2020 Intel Corporation + * Copyright (C) 2013-2015 Intel Mobile Communications GmbH + * Copyright (C) 2016-2017 Intel Deutschland GmbH + */ +#ifndef __iwl_fw_api_datapath_h__ +#define __iwl_fw_api_datapath_h__ + +/** + * enum iwl_data_path_subcmd_ids - data path group commands + */ +enum iwl_data_path_subcmd_ids { + /** + * @DQA_ENABLE_CMD: &struct iwl_dqa_enable_cmd + */ + DQA_ENABLE_CMD = 0x0, + + /** + * @UPDATE_MU_GROUPS_CMD: &struct iwl_mu_group_mgmt_cmd + */ + UPDATE_MU_GROUPS_CMD = 0x1, + + /** + * @TRIGGER_RX_QUEUES_NOTIF_CMD: &struct iwl_rxq_sync_cmd + */ + TRIGGER_RX_QUEUES_NOTIF_CMD = 0x2, + + /** + * @STA_HE_CTXT_CMD: &struct iwl_he_sta_context_cmd + */ + STA_HE_CTXT_CMD = 0x7, + + /** + * @RLC_CONFIG_CMD: &struct iwl_rlc_config_cmd + */ + RLC_CONFIG_CMD = 0x8, + + /** + * @RFH_QUEUE_CONFIG_CMD: &struct iwl_rfh_queue_config + */ + RFH_QUEUE_CONFIG_CMD = 0xD, + + /** + * @TLC_MNG_CONFIG_CMD: &struct iwl_tlc_config_cmd_v4 + */ + TLC_MNG_CONFIG_CMD = 0xF, + + /** + * @HE_AIR_SNIFFER_CONFIG_CMD: &struct iwl_he_monitor_cmd + */ + HE_AIR_SNIFFER_CONFIG_CMD = 0x13, + + /** + * @CHEST_COLLECTOR_FILTER_CONFIG_CMD: Configure the CSI + * matrix collection, uses &struct iwl_channel_estimation_cfg + */ + CHEST_COLLECTOR_FILTER_CONFIG_CMD = 0x14, + + /** + * @RX_BAID_ALLOCATION_CONFIG_CMD: Allocate/deallocate a BAID for an RX + * blockack session, uses &struct iwl_rx_baid_cfg_cmd for the + * command, and &struct iwl_rx_baid_cfg_resp as a response. + */ + RX_BAID_ALLOCATION_CONFIG_CMD = 0x16, + + /** + * @SCD_QUEUE_CONFIG_CMD: new scheduler queue allocation/config/removal + * command, uses &struct iwl_scd_queue_cfg_cmd and the response + * is (same as before) &struct iwl_tx_queue_cfg_rsp. + */ + SCD_QUEUE_CONFIG_CMD = 0x17, + + /** + * @SEC_KEY_CMD: security key command, uses &struct iwl_sec_key_cmd + */ + SEC_KEY_CMD = 0x18, + + /** + * @MONITOR_NOTIF: Datapath monitoring notification, using + * &struct iwl_datapath_monitor_notif + */ + MONITOR_NOTIF = 0xF4, + + /** + * @RX_NO_DATA_NOTIF: &struct iwl_rx_no_data or &struct iwl_rx_no_data_ver_3 + */ + RX_NO_DATA_NOTIF = 0xF5, + + /** + * @THERMAL_DUAL_CHAIN_DISABLE_REQ: firmware request for SMPS mode, + * &struct iwl_thermal_dual_chain_request + */ + THERMAL_DUAL_CHAIN_REQUEST = 0xF6, + + /** + * @TLC_MNG_UPDATE_NOTIF: &struct iwl_tlc_update_notif + */ + TLC_MNG_UPDATE_NOTIF = 0xF7, + + /** + * @STA_PM_NOTIF: &struct iwl_mvm_pm_state_notification + */ + STA_PM_NOTIF = 0xFD, + + /** + * @MU_GROUP_MGMT_NOTIF: &struct iwl_mu_group_mgmt_notif + */ + MU_GROUP_MGMT_NOTIF = 0xFE, + + /** + * @RX_QUEUES_NOTIFICATION: &struct iwl_rxq_sync_notification + */ + RX_QUEUES_NOTIFICATION = 0xFF, +}; + +/** + * struct iwl_mu_group_mgmt_cmd - VHT MU-MIMO group configuration + * + * @reserved: reserved + * @membership_status: a bitmap of MU groups + * @user_position:the position of station in a group. If the station is in the + * group then bits (group * 2) is the position -1 + */ +struct iwl_mu_group_mgmt_cmd { + __le32 reserved; + __le32 membership_status[2]; + __le32 user_position[4]; +} __packed; /* MU_GROUP_ID_MNG_TABLE_API_S_VER_1 */ + +/** + * struct iwl_mu_group_mgmt_notif - VHT MU-MIMO group id notification + * + * @membership_status: a bitmap of MU groups + * @user_position: the position of station in a group. If the station is in the + * group then bits (group * 2) is the position -1 + */ +struct iwl_mu_group_mgmt_notif { + __le32 membership_status[2]; + __le32 user_position[4]; +} __packed; /* MU_GROUP_MNG_NTFY_API_S_VER_1 */ + +enum iwl_channel_estimation_flags { + IWL_CHANNEL_ESTIMATION_ENABLE = BIT(0), + IWL_CHANNEL_ESTIMATION_TIMER = BIT(1), + IWL_CHANNEL_ESTIMATION_COUNTER = BIT(2), +}; + +/** + * struct iwl_channel_estimation_cfg - channel estimation reporting config + */ +struct iwl_channel_estimation_cfg { + /** + * @flags: flags, see &enum iwl_channel_estimation_flags + */ + __le32 flags; + /** + * @timer: if enabled via flags, automatically disable after this many + * microseconds + */ + __le32 timer; + /** + * @count: if enabled via flags, automatically disable after this many + * frames with channel estimation matrix were captured + */ + __le32 count; + /** + * @rate_n_flags_mask: only try to record the channel estimation matrix + * if the rate_n_flags value for the received frame (let's call + * that rx_rnf) matches the mask/value given here like this: + * (rx_rnf & rate_n_flags_mask) == rate_n_flags_val. + */ + __le32 rate_n_flags_mask; + /** + * @rate_n_flags_val: see @rate_n_flags_mask + */ + __le32 rate_n_flags_val; + /** + * @reserved: reserved (for alignment) + */ + __le32 reserved; + /** + * @frame_types: bitmap of frame types to capture, the received frame's + * subtype|type takes 6 bits in the frame and the corresponding bit + * in this field must be set to 1 to capture channel estimation for + * that frame type. Set to all-ones to enable capturing for all + * frame types. + */ + __le64 frame_types; +} __packed; /* CHEST_COLLECTOR_FILTER_CMD_API_S_VER_1 */ + +enum iwl_datapath_monitor_notif_type { + IWL_DP_MON_NOTIF_TYPE_EXT_CCA, +}; + +struct iwl_datapath_monitor_notif { + __le32 type; + u8 mac_id; + u8 reserved[3]; +} __packed; /* MONITOR_NTF_API_S_VER_1 */ + +/** + * enum iwl_thermal_dual_chain_req_events - firmware SMPS request event + * @THERMAL_DUAL_CHAIN_REQ_ENABLE: (re-)enable dual-chain operation + * (subject to other constraints) + * @THERMAL_DUAL_CHAIN_REQ_DISABLE: disable dual-chain operation + * (static SMPS) + */ +enum iwl_thermal_dual_chain_req_events { + THERMAL_DUAL_CHAIN_REQ_ENABLE, + THERMAL_DUAL_CHAIN_REQ_DISABLE, +}; /* THERMAL_DUAL_CHAIN_DISABLE_STATE_API_E_VER_1 */ + +/** + * struct iwl_thermal_dual_chain_request - SMPS request + * @event: the type of request, see &enum iwl_thermal_dual_chain_req_events + */ +struct iwl_thermal_dual_chain_request { + __le32 event; +} __packed; /* THERMAL_DUAL_CHAIN_DISABLE_REQ_NTFY_API_S_VER_1 */ + +enum iwl_rlc_chain_info { + IWL_RLC_CHAIN_INFO_DRIVER_FORCE = BIT(0), + IWL_RLC_CHAIN_INFO_VALID = 0x000e, + IWL_RLC_CHAIN_INFO_FORCE = 0x0070, + IWL_RLC_CHAIN_INFO_FORCE_MIMO = 0x0380, + IWL_RLC_CHAIN_INFO_COUNT = 0x0c00, + IWL_RLC_CHAIN_INFO_MIMO_COUNT = 0x3000, +}; + +/** + * struct iwl_rlc_properties - RLC properties + * @rx_chain_info: RX chain info, &enum iwl_rlc_chain_info + * @reserved: reserved + */ +struct iwl_rlc_properties { + __le32 rx_chain_info; + __le32 reserved; +} __packed; /* RLC_PROPERTIES_S_VER_1 */ + +enum iwl_sad_mode { + IWL_SAD_MODE_ENABLED = BIT(0), + IWL_SAD_MODE_DEFAULT_ANT_MSK = 0x6, + IWL_SAD_MODE_DEFAULT_ANT_FW = 0x0, + IWL_SAD_MODE_DEFAULT_ANT_A = 0x2, + IWL_SAD_MODE_DEFAULT_ANT_B = 0x4, +}; + +/** + * struct iwl_sad_properties - SAD properties + * @chain_a_sad_mode: chain A SAD mode, &enum iwl_sad_mode + * @chain_b_sad_mode: chain B SAD mode, &enum iwl_sad_mode + * @mac_id: MAC index + * @reserved: reserved + */ +struct iwl_sad_properties { + __le32 chain_a_sad_mode; + __le32 chain_b_sad_mode; + __le32 mac_id; + __le32 reserved; +} __packed; + +/** + * struct iwl_rlc_config_cmd - RLC configuration + * @phy_id: PHY index + * @rlc: RLC properties, &struct iwl_rlc_properties + * @sad: SAD (single antenna diversity) options, &struct iwl_sad_properties + * @flags: flags, &enum iwl_rlc_flags + * @reserved: reserved + */ +struct iwl_rlc_config_cmd { + __le32 phy_id; + struct iwl_rlc_properties rlc; + struct iwl_sad_properties sad; + u8 flags; + u8 reserved[3]; +} __packed; /* RLC_CONFIG_CMD_API_S_VER_2 */ + +#define IWL_MAX_BAID_OLD 16 /* MAX_IMMEDIATE_BA_API_D_VER_2 */ +#define IWL_MAX_BAID 32 /* MAX_IMMEDIATE_BA_API_D_VER_3 */ + +/** + * enum iwl_rx_baid_action - BAID allocation/config action + * @IWL_RX_BAID_ACTION_ADD: add a new BAID session + * @IWL_RX_BAID_ACTION_MODIFY: modify the BAID session + * @IWL_RX_BAID_ACTION_REMOVE: remove the BAID session + */ +enum iwl_rx_baid_action { + IWL_RX_BAID_ACTION_ADD, + IWL_RX_BAID_ACTION_MODIFY, + IWL_RX_BAID_ACTION_REMOVE, +}; /* RX_BAID_ALLOCATION_ACTION_E_VER_1 */ + +/** + * struct iwl_rx_baid_cfg_cmd_alloc - BAID allocation data + * @sta_id_mask: station ID mask + * @tid: the TID for this session + * @reserved: reserved + * @ssn: the starting sequence number + * @win_size: RX BA session window size + */ +struct iwl_rx_baid_cfg_cmd_alloc { + __le32 sta_id_mask; + u8 tid; + u8 reserved[3]; + __le16 ssn; + __le16 win_size; +} __packed; /* RX_BAID_ALLOCATION_ADD_CMD_API_S_VER_1 */ + +/** + * struct iwl_rx_baid_cfg_cmd_modify - BAID modification data + * @old_sta_id_mask: old station ID mask + * @new_sta_id_mask: new station ID mask + * @tid: TID of the BAID + */ +struct iwl_rx_baid_cfg_cmd_modify { + __le32 old_sta_id_mask; + __le32 new_sta_id_mask; + __le32 tid; +} __packed; /* RX_BAID_ALLOCATION_MODIFY_CMD_API_S_VER_2 */ + +/** + * struct iwl_rx_baid_cfg_cmd_remove_v1 - BAID removal data + * @baid: the BAID to remove + */ +struct iwl_rx_baid_cfg_cmd_remove_v1 { + __le32 baid; +} __packed; /* RX_BAID_ALLOCATION_REMOVE_CMD_API_S_VER_1 */ + +/** + * struct iwl_rx_baid_cfg_cmd_remove - BAID removal data + * @sta_id_mask: the station mask of the BAID to remove + * @tid: the TID of the BAID to remove + */ +struct iwl_rx_baid_cfg_cmd_remove { + __le32 sta_id_mask; + __le32 tid; +} __packed; /* RX_BAID_ALLOCATION_REMOVE_CMD_API_S_VER_2 */ + +/** + * struct iwl_rx_baid_cfg_cmd - BAID allocation/config command + * @action: the action, from &enum iwl_rx_baid_action + */ +struct iwl_rx_baid_cfg_cmd { + __le32 action; + union { + struct iwl_rx_baid_cfg_cmd_alloc alloc; + struct iwl_rx_baid_cfg_cmd_modify modify; + struct iwl_rx_baid_cfg_cmd_remove_v1 remove_v1; + struct iwl_rx_baid_cfg_cmd_remove remove; + }; /* RX_BAID_ALLOCATION_OPERATION_API_U_VER_2 */ +} __packed; /* RX_BAID_ALLOCATION_CONFIG_CMD_API_S_VER_2 */ + +/** + * struct iwl_rx_baid_cfg_resp - BAID allocation response + * @baid: the allocated BAID + */ +struct iwl_rx_baid_cfg_resp { + __le32 baid; +}; /* RX_BAID_ALLOCATION_RESPONSE_API_S_VER_1 */ + +/** + * enum iwl_scd_queue_cfg_operation - scheduler queue operation + * @IWL_SCD_QUEUE_ADD: allocate a new queue + * @IWL_SCD_QUEUE_REMOVE: remove a queue + * @IWL_SCD_QUEUE_MODIFY: modify a queue + */ +enum iwl_scd_queue_cfg_operation { + IWL_SCD_QUEUE_ADD = 0, + IWL_SCD_QUEUE_REMOVE = 1, + IWL_SCD_QUEUE_MODIFY = 2, +}; + +/** + * struct iwl_scd_queue_cfg_cmd - scheduler queue allocation command + * @operation: the operation, see &enum iwl_scd_queue_cfg_operation + * @u.add.sta_mask: station mask + * @u.add.tid: TID + * @u.add.reserved: reserved + * @u.add.flags: flags from &enum iwl_tx_queue_cfg_actions, except + * %TX_QUEUE_CFG_ENABLE_QUEUE is not valid + * @u.add.cb_size: size code + * @u.add.bc_dram_addr: byte-count table IOVA + * @u.add.tfdq_dram_addr: TFD queue IOVA + * @u.remove.sta_mask: station mask of queue to remove + * @u.remove.tid: TID of queue to remove + * @u.modify.old_sta_mask: old station mask for modify + * @u.modify.tid: TID of queue to modify + * @u.modify.new_sta_mask: new station mask for modify + */ +struct iwl_scd_queue_cfg_cmd { + __le32 operation; + union { + struct { + __le32 sta_mask; + u8 tid; + u8 reserved[3]; + __le32 flags; + __le32 cb_size; + __le64 bc_dram_addr; + __le64 tfdq_dram_addr; + } __packed add; /* TX_QUEUE_CFG_CMD_ADD_API_S_VER_1 */ + struct { + __le32 sta_mask; + __le32 tid; + } __packed remove; /* TX_QUEUE_CFG_CMD_REMOVE_API_S_VER_1 */ + struct { + __le32 old_sta_mask; + __le32 tid; + __le32 new_sta_mask; + } __packed modify; /* TX_QUEUE_CFG_CMD_MODIFY_API_S_VER_1 */ + } __packed u; /* TX_QUEUE_CFG_CMD_OPERATION_API_U_VER_1 */ +} __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_3 */ + +/** + * enum iwl_sec_key_flags - security key command key flags + * @IWL_SEC_KEY_FLAG_CIPHER_MASK: cipher mask + * @IWL_SEC_KEY_FLAG_CIPHER_WEP: WEP cipher + * @IWL_SEC_KEY_FLAG_CIPHER_CCMP: CCMP/CMAC cipher + * @IWL_SEC_KEY_FLAG_CIPHER_TKIP: TKIP cipher + * @IWL_SEC_KEY_FLAG_CIPHER_GCMP: GCMP/GMAC cipher + * @IWL_SEC_KEY_FLAG_NO_TX: don't install for TX + * @IWL_SEC_KEY_FLAG_KEY_SIZE: large key size (WEP-104, GCMP-256, GMAC-256) + * @IWL_SEC_KEY_FLAG_MFP: MFP is in used for this key + * @IWL_SEC_KEY_FLAG_MCAST_KEY: this is a multicast key + * @IWL_SEC_KEY_FLAG_SPP_AMSDU: SPP A-MSDU should be used + */ +enum iwl_sec_key_flags { + IWL_SEC_KEY_FLAG_CIPHER_MASK = 0x07, + IWL_SEC_KEY_FLAG_CIPHER_WEP = 0x01, + IWL_SEC_KEY_FLAG_CIPHER_CCMP = 0x02, + IWL_SEC_KEY_FLAG_CIPHER_TKIP = 0x03, + IWL_SEC_KEY_FLAG_CIPHER_GCMP = 0x05, + IWL_SEC_KEY_FLAG_NO_TX = 0x08, + IWL_SEC_KEY_FLAG_KEY_SIZE = 0x10, + IWL_SEC_KEY_FLAG_MFP = 0x20, + IWL_SEC_KEY_FLAG_MCAST_KEY = 0x40, + IWL_SEC_KEY_FLAG_SPP_AMSDU = 0x80, +}; + +#define IWL_SEC_WEP_KEY_OFFSET 3 + +/** + * struct iwl_sec_key_cmd - security key command + * @action: action from &enum iwl_ctxt_action + * @u.add.sta_mask: station mask for the new key + * @u.add.key_id: key ID (0-7) for the new key + * @u.add.key_flags: key flags per &enum iwl_sec_key_flags + * @u.add.key: key material. WEP keys should start from &IWL_SEC_WEP_KEY_OFFSET. + * @u.add.tkip_mic_rx_key: TKIP MIC RX key + * @u.add.tkip_mic_tx_key: TKIP MIC TX key + * @u.add.rx_seq: RX sequence counter value + * @u.add.tx_seq: TX sequence counter value + * @u.modify.old_sta_mask: old station mask + * @u.modify.new_sta_mask: new station mask + * @u.modify.key_id: key ID + * @u.modify.key_flags: new key flags + * @u.remove.sta_mask: station mask + * @u.remove.key_id: key ID + * @u.remove.key_flags: key flags + */ +struct iwl_sec_key_cmd { + __le32 action; + union { + struct { + __le32 sta_mask; + __le32 key_id; + __le32 key_flags; + u8 key[32]; + u8 tkip_mic_rx_key[8]; + u8 tkip_mic_tx_key[8]; + __le64 rx_seq; + __le64 tx_seq; + } __packed add; /* SEC_KEY_ADD_CMD_API_S_VER_1 */ + struct { + __le32 old_sta_mask; + __le32 new_sta_mask; + __le32 key_id; + __le32 key_flags; + } __packed modify; /* SEC_KEY_MODIFY_CMD_API_S_VER_1 */ + struct { + __le32 sta_mask; + __le32 key_id; + __le32 key_flags; + } __packed remove; /* SEC_KEY_REMOVE_CMD_API_S_VER_1 */ + } __packed u; /* SEC_KEY_OPERATION_API_U_VER_1 */ +} __packed; /* SEC_KEY_CMD_API_S_VER_1 */ + +#endif /* __iwl_fw_api_datapath_h__ */ -- cgit v1.2.3