From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/intel/iwlwifi/iwl-config.h | 664 ++++++++++++++++++++++++ 1 file changed, 664 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/iwl-config.h (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-config.h') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h new file mode 100644 index 000000000..cfa5e1b3c --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -0,0 +1,664 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (C) 2005-2014, 2018-2021 Intel Corporation + * Copyright (C) 2016-2017 Intel Deutschland GmbH + */ +#ifndef __IWL_CONFIG_H__ +#define __IWL_CONFIG_H__ + +#include +#include +#include +#include +#include "iwl-csr.h" + +enum iwl_device_family { + IWL_DEVICE_FAMILY_UNDEFINED, + IWL_DEVICE_FAMILY_1000, + IWL_DEVICE_FAMILY_100, + IWL_DEVICE_FAMILY_2000, + IWL_DEVICE_FAMILY_2030, + IWL_DEVICE_FAMILY_105, + IWL_DEVICE_FAMILY_135, + IWL_DEVICE_FAMILY_5000, + IWL_DEVICE_FAMILY_5150, + IWL_DEVICE_FAMILY_6000, + IWL_DEVICE_FAMILY_6000i, + IWL_DEVICE_FAMILY_6005, + IWL_DEVICE_FAMILY_6030, + IWL_DEVICE_FAMILY_6050, + IWL_DEVICE_FAMILY_6150, + IWL_DEVICE_FAMILY_7000, + IWL_DEVICE_FAMILY_8000, + IWL_DEVICE_FAMILY_9000, + IWL_DEVICE_FAMILY_22000, + IWL_DEVICE_FAMILY_AX210, + IWL_DEVICE_FAMILY_BZ, +}; + +/* + * LED mode + * IWL_LED_DEFAULT: use device default + * IWL_LED_RF_STATE: turn LED on/off based on RF state + * LED ON = RF ON + * LED OFF = RF OFF + * IWL_LED_BLINK: adjust led blink rate based on blink table + * IWL_LED_DISABLE: led disabled + */ +enum iwl_led_mode { + IWL_LED_DEFAULT, + IWL_LED_RF_STATE, + IWL_LED_BLINK, + IWL_LED_DISABLE, +}; + +/** + * enum iwl_nvm_type - nvm formats + * @IWL_NVM: the regular format + * @IWL_NVM_EXT: extended NVM format + * @IWL_NVM_SDP: NVM format used by 3168 series + */ +enum iwl_nvm_type { + IWL_NVM, + IWL_NVM_EXT, + IWL_NVM_SDP, +}; + +/* + * This is the threshold value of plcp error rate per 100mSecs. It is + * used to set and check for the validity of plcp_delta. + */ +#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1 +#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50 +#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100 +#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200 +#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255 +#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0 + +/* TX queue watchdog timeouts in mSecs */ +#define IWL_WATCHDOG_DISABLED 0 +#define IWL_DEF_WD_TIMEOUT 2500 +#define IWL_LONG_WD_TIMEOUT 10000 +#define IWL_MAX_WD_TIMEOUT 120000 + +#define IWL_DEFAULT_MAX_TX_POWER 22 +#define IWL_TX_CSUM_NETIF_FLAGS (NETIF_F_IPV6_CSUM | NETIF_F_IP_CSUM |\ + NETIF_F_TSO | NETIF_F_TSO6) +#define IWL_TX_CSUM_NETIF_FLAGS_BZ (NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6) +#define IWL_CSUM_NETIF_FLAGS_MASK (IWL_TX_CSUM_NETIF_FLAGS | \ + IWL_TX_CSUM_NETIF_FLAGS_BZ | \ + NETIF_F_RXCSUM) + +/* Antenna presence definitions */ +#define ANT_NONE 0x0 +#define ANT_INVALID 0xff +#define ANT_A BIT(0) +#define ANT_B BIT(1) +#define ANT_C BIT(2) +#define ANT_AB (ANT_A | ANT_B) +#define ANT_AC (ANT_A | ANT_C) +#define ANT_BC (ANT_B | ANT_C) +#define ANT_ABC (ANT_A | ANT_B | ANT_C) + + +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} + +/** + * struct iwl_base_params - params not likely to change within a device family + * @max_ll_items: max number of OTP blocks + * @shadow_ram_support: shadow support for OTP memory + * @led_compensation: compensate on the led on/off time per HW according + * to the deviation to achieve the desired led frequency. + * The detail algorithm is described in iwl-led.c + * @wd_timeout: TX queues watchdog timeout + * @max_event_log_size: size of event log buffer size for ucode event logging + * @shadow_reg_enable: HW shadow register support + * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command + * is in flight. This is due to a HW bug in 7260, 3160 and 7265. + * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled. + * @max_tfd_queue_size: max number of entries in tfd queue. + */ +struct iwl_base_params { + unsigned int wd_timeout; + + u16 eeprom_size; + u16 max_event_log_size; + + u8 pll_cfg:1, /* for iwl_pcie_apm_init() */ + shadow_ram_support:1, + shadow_reg_enable:1, + pcie_l1_allowed:1, + apmg_wake_up_wa:1, + scd_chain_ext_wa:1; + + u16 num_of_queues; /* def: HW dependent */ + u32 max_tfd_queue_size; /* def: HW dependent */ + + u8 max_ll_items; + u8 led_compensation; +}; + +/* + * @stbc: support Tx STBC and 1*SS Rx STBC + * @ldpc: support Tx/Rx with LDPC + * @use_rts_for_aggregation: use rts/cts protection for HT traffic + * @ht40_bands: bitmap of bands (using %NL80211_BAND_*) that support HT40 + */ +struct iwl_ht_params { + u8 ht_greenfield_support:1, + stbc:1, + ldpc:1, + use_rts_for_aggregation:1; + u8 ht40_bands; +}; + +/* + * Tx-backoff threshold + * @temperature: The threshold in Celsius + * @backoff: The tx-backoff in uSec + */ +struct iwl_tt_tx_backoff { + s32 temperature; + u32 backoff; +}; + +#define TT_TX_BACKOFF_SIZE 6 + +/** + * struct iwl_tt_params - thermal throttling parameters + * @ct_kill_entry: CT Kill entry threshold + * @ct_kill_exit: CT Kill exit threshold + * @ct_kill_duration: The time intervals (in uSec) in which the driver needs + * to checks whether to exit CT Kill. + * @dynamic_smps_entry: Dynamic SMPS entry threshold + * @dynamic_smps_exit: Dynamic SMPS exit threshold + * @tx_protection_entry: TX protection entry threshold + * @tx_protection_exit: TX protection exit threshold + * @tx_backoff: Array of thresholds for tx-backoff , in ascending order. + * @support_ct_kill: Support CT Kill? + * @support_dynamic_smps: Support dynamic SMPS? + * @support_tx_protection: Support tx protection? + * @support_tx_backoff: Support tx-backoff? + */ +struct iwl_tt_params { + u32 ct_kill_entry; + u32 ct_kill_exit; + u32 ct_kill_duration; + u32 dynamic_smps_entry; + u32 dynamic_smps_exit; + u32 tx_protection_entry; + u32 tx_protection_exit; + struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE]; + u8 support_ct_kill:1, + support_dynamic_smps:1, + support_tx_protection:1, + support_tx_backoff:1; +}; + +/* + * information on how to parse the EEPROM + */ +#define EEPROM_REG_BAND_1_CHANNELS 0x08 +#define EEPROM_REG_BAND_2_CHANNELS 0x26 +#define EEPROM_REG_BAND_3_CHANNELS 0x42 +#define EEPROM_REG_BAND_4_CHANNELS 0x5C +#define EEPROM_REG_BAND_5_CHANNELS 0x74 +#define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82 +#define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92 +#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80 +#define EEPROM_REGULATORY_BAND_NO_HT40 0 + +/* lower blocks contain EEPROM image and calibration data */ +#define OTP_LOW_IMAGE_SIZE_2K (2 * 512 * sizeof(u16)) /* 2 KB */ +#define OTP_LOW_IMAGE_SIZE_16K (16 * 512 * sizeof(u16)) /* 16 KB */ +#define OTP_LOW_IMAGE_SIZE_32K (32 * 512 * sizeof(u16)) /* 32 KB */ + +struct iwl_eeprom_params { + const u8 regulatory_bands[7]; + bool enhanced_txpower; +}; + +/* Tx-backoff power threshold + * @pwr: The power limit in mw + * @backoff: The tx-backoff in uSec + */ +struct iwl_pwr_tx_backoff { + u32 pwr; + u32 backoff; +}; + +enum iwl_cfg_trans_ltr_delay { + IWL_CFG_TRANS_LTR_DELAY_NONE = 0, + IWL_CFG_TRANS_LTR_DELAY_200US = 1, + IWL_CFG_TRANS_LTR_DELAY_2500US = 2, + IWL_CFG_TRANS_LTR_DELAY_1820US = 3, +}; + +/** + * struct iwl_cfg_trans - information needed to start the trans + * + * These values are specific to the device ID and do not change when + * multiple configs are used for a single device ID. They values are + * used, among other things, to boot the NIC so that the HW REV or + * RFID can be read before deciding the remaining parameters to use. + * + * @base_params: pointer to basic parameters + * @csr: csr flags and addresses that are different across devices + * @device_family: the device family + * @umac_prph_offset: offset to add to UMAC periphery address + * @xtal_latency: power up latency to get the xtal stabilized + * @extra_phy_cfg_flags: extra configuration flags to pass to the PHY + * @rf_id: need to read rf_id to determine the firmware image + * @use_tfh: use TFH + * @gen2: 22000 and on transport operation + * @mq_rx_supported: multi-queue rx support + * @integrated: discrete or integrated + * @low_latency_xtal: use the low latency xtal if supported + * @ltr_delay: LTR delay parameter, &enum iwl_cfg_trans_ltr_delay. + * @imr_enabled: use the IMR if supported. + */ +struct iwl_cfg_trans_params { + const struct iwl_base_params *base_params; + enum iwl_device_family device_family; + u32 umac_prph_offset; + u32 xtal_latency; + u32 extra_phy_cfg_flags; + u32 rf_id:1, + use_tfh:1, + gen2:1, + mq_rx_supported:1, + integrated:1, + low_latency_xtal:1, + bisr_workaround:1, + ltr_delay:2, + imr_enabled:1; +}; + +/** + * struct iwl_fw_mon_reg - FW monitor register info + * @addr: register address + * @mask: register mask + */ +struct iwl_fw_mon_reg { + u32 addr; + u32 mask; +}; + +/** + * struct iwl_fw_mon_regs - FW monitor registers + * @write_ptr: write pointer register + * @cycle_cnt: cycle count register + * @cur_frag: current fragment in use + */ +struct iwl_fw_mon_regs { + struct iwl_fw_mon_reg write_ptr; + struct iwl_fw_mon_reg cycle_cnt; + struct iwl_fw_mon_reg cur_frag; +}; + +/** + * struct iwl_cfg + * @trans: the trans-specific configuration part + * @name: Official name of the device + * @fw_name_pre: Firmware filename prefix. The api version and extension + * (.ucode) will be added to filename before loading from disk. The + * filename is constructed as fw_name_pre.ucode. + * @ucode_api_max: Highest version of uCode API supported by driver. + * @ucode_api_min: Lowest version of uCode API supported by driver. + * @max_inst_size: The maximal length of the fw inst section (only DVM) + * @max_data_size: The maximal length of the fw data section (only DVM) + * @valid_tx_ant: valid transmit antenna + * @valid_rx_ant: valid receive antenna + * @non_shared_ant: the antenna that is for WiFi only + * @nvm_ver: NVM version + * @nvm_calib_ver: NVM calibration version + * @lib: pointer to the lib ops + * @ht_params: point to ht parameters + * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) + * @rx_with_siso_diversity: 1x1 device with rx antenna diversity + * @tx_with_siso_diversity: 1x1 device with tx antenna diversity + * @internal_wimax_coex: internal wifi/wimax combo device + * @high_temp: Is this NIC is designated to be in high temperature. + * @host_interrupt_operation_mode: device needs host interrupt operation + * mode set + * @nvm_hw_section_num: the ID of the HW NVM section + * @mac_addr_from_csr: read HW address from CSR registers at this offset + * @features: hw features, any combination of feature_passlist + * @pwr_tx_backoffs: translation table between power limits and backoffs + * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response + * @dccm_offset: offset from which DCCM begins + * @dccm_len: length of DCCM (including runtime stack CCM) + * @dccm2_offset: offset from which the second DCCM begins + * @dccm2_len: length of the second DCCM + * @smem_offset: offset from which the SMEM begins + * @smem_len: the length of SMEM + * @vht_mu_mimo_supported: VHT MU-MIMO support + * @cdb: CDB support + * @nvm_type: see &enum iwl_nvm_type + * @d3_debug_data_base_addr: base address where D3 debug data is stored + * @d3_debug_data_length: length of the D3 debug data + * @bisr_workaround: BISR hardware workaround (for 22260 series devices) + * @min_txq_size: minimum number of slots required in a TX queue + * @uhb_supported: ultra high band channels supported + * @min_ba_txq_size: minimum number of slots required in a TX queue which + * based on hardware support (HE - 256, EHT - 1K). + * @num_rbds: number of receive buffer descriptors to use + * (only used for multi-queue capable devices) + * @mac_addr_csr_base: CSR base register for MAC address access, if not set + * assume 0x380 + * + * We enable the driver to be backward compatible wrt. hardware features. + * API differences in uCode shouldn't be handled here but through TLVs + * and/or the uCode API version instead. + */ +struct iwl_cfg { + struct iwl_cfg_trans_params trans; + /* params specific to an individual device within a device family */ + const char *name; + const char *fw_name_pre; + /* params likely to change within a device family */ + const struct iwl_ht_params *ht_params; + const struct iwl_eeprom_params *eeprom_params; + const struct iwl_pwr_tx_backoff *pwr_tx_backoffs; + const char *default_nvm_file_C_step; + const struct iwl_tt_params *thermal_params; + enum iwl_led_mode led_mode; + enum iwl_nvm_type nvm_type; + u32 max_data_size; + u32 max_inst_size; + netdev_features_t features; + u32 dccm_offset; + u32 dccm_len; + u32 dccm2_offset; + u32 dccm2_len; + u32 smem_offset; + u32 smem_len; + u16 nvm_ver; + u16 nvm_calib_ver; + u32 rx_with_siso_diversity:1, + tx_with_siso_diversity:1, + bt_shared_single_ant:1, + internal_wimax_coex:1, + host_interrupt_operation_mode:1, + high_temp:1, + mac_addr_from_csr:10, + lp_xtal_workaround:1, + disable_dummy_notification:1, + apmg_not_supported:1, + vht_mu_mimo_supported:1, + cdb:1, + dbgc_supported:1, + uhb_supported:1; + u8 valid_tx_ant; + u8 valid_rx_ant; + u8 non_shared_ant; + u8 nvm_hw_section_num; + u8 max_tx_agg_size; + u8 ucode_api_max; + u8 ucode_api_min; + u16 num_rbds; + u32 min_umac_error_event_table; + u32 d3_debug_data_base_addr; + u32 d3_debug_data_length; + u32 min_txq_size; + u32 gp2_reg_addr; + u32 min_ba_txq_size; + const struct iwl_fw_mon_regs mon_dram_regs; + const struct iwl_fw_mon_regs mon_smem_regs; + const struct iwl_fw_mon_regs mon_dbgi_regs; +}; + +#define IWL_CFG_ANY (~0) + +#define IWL_CFG_MAC_TYPE_PU 0x31 +#define IWL_CFG_MAC_TYPE_PNJ 0x32 +#define IWL_CFG_MAC_TYPE_TH 0x32 +#define IWL_CFG_MAC_TYPE_QU 0x33 +#define IWL_CFG_MAC_TYPE_QUZ 0x35 +#define IWL_CFG_MAC_TYPE_QNJ 0x36 +#define IWL_CFG_MAC_TYPE_SO 0x37 +#define IWL_CFG_MAC_TYPE_SNJ 0x42 +#define IWL_CFG_MAC_TYPE_SOF 0x43 +#define IWL_CFG_MAC_TYPE_MA 0x44 +#define IWL_CFG_MAC_TYPE_BZ 0x46 +#define IWL_CFG_MAC_TYPE_GL 0x47 + +#define IWL_CFG_RF_TYPE_TH 0x105 +#define IWL_CFG_RF_TYPE_TH1 0x108 +#define IWL_CFG_RF_TYPE_JF2 0x105 +#define IWL_CFG_RF_TYPE_JF1 0x108 +#define IWL_CFG_RF_TYPE_HR2 0x10A +#define IWL_CFG_RF_TYPE_HR1 0x10C +#define IWL_CFG_RF_TYPE_GF 0x10D +#define IWL_CFG_RF_TYPE_MR 0x110 +#define IWL_CFG_RF_TYPE_MS 0x111 +#define IWL_CFG_RF_TYPE_FM 0x112 + +#define IWL_CFG_RF_ID_TH 0x1 +#define IWL_CFG_RF_ID_TH1 0x1 +#define IWL_CFG_RF_ID_JF 0x3 +#define IWL_CFG_RF_ID_JF1 0x6 +#define IWL_CFG_RF_ID_JF1_DIV 0xA +#define IWL_CFG_RF_ID_HR 0x7 +#define IWL_CFG_RF_ID_HR1 0x4 + +#define IWL_CFG_NO_160 0x1 +#define IWL_CFG_160 0x0 + +#define IWL_CFG_CORES_BT 0x0 +#define IWL_CFG_CORES_BT_GNSS 0x5 + +#define IWL_CFG_NO_CDB 0x0 +#define IWL_CFG_CDB 0x1 + +#define IWL_CFG_NO_JACKET 0x0 +#define IWL_CFG_IS_JACKET 0x1 + +#define IWL_SUBDEVICE_RF_ID(subdevice) ((u16)((subdevice) & 0x00F0) >> 4) +#define IWL_SUBDEVICE_NO_160(subdevice) ((u16)((subdevice) & 0x0200) >> 9) +#define IWL_SUBDEVICE_CORES(subdevice) ((u16)((subdevice) & 0x1C00) >> 10) + +struct iwl_dev_info { + u16 device; + u16 subdevice; + u16 mac_type; + u16 rf_type; + u8 mac_step; + u8 rf_id; + u8 no_160; + u8 cores; + u8 cdb; + u8 jacket; + const struct iwl_cfg *cfg; + const char *name; +}; + +/* + * This list declares the config structures for all devices. + */ +extern const struct iwl_cfg_trans_params iwl9000_trans_cfg; +extern const struct iwl_cfg_trans_params iwl9560_trans_cfg; +extern const struct iwl_cfg_trans_params iwl9560_long_latency_trans_cfg; +extern const struct iwl_cfg_trans_params iwl9560_shared_clk_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_qnj_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_qu_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_qu_medium_latency_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_qu_long_latency_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_ax200_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_snj_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_so_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_so_long_latency_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_so_long_latency_imr_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_ma_trans_cfg; +extern const struct iwl_cfg_trans_params iwl_bz_trans_cfg; +extern const char iwl9162_name[]; +extern const char iwl9260_name[]; +extern const char iwl9260_1_name[]; +extern const char iwl9270_name[]; +extern const char iwl9461_name[]; +extern const char iwl9462_name[]; +extern const char iwl9560_name[]; +extern const char iwl9162_160_name[]; +extern const char iwl9260_160_name[]; +extern const char iwl9270_160_name[]; +extern const char iwl9461_160_name[]; +extern const char iwl9462_160_name[]; +extern const char iwl9560_160_name[]; +extern const char iwl9260_killer_1550_name[]; +extern const char iwl9560_killer_1550i_name[]; +extern const char iwl9560_killer_1550s_name[]; +extern const char iwl_ax200_name[]; +extern const char iwl_ax203_name[]; +extern const char iwl_ax204_name[]; +extern const char iwl_ax201_name[]; +extern const char iwl_ax101_name[]; +extern const char iwl_ax200_killer_1650w_name[]; +extern const char iwl_ax200_killer_1650x_name[]; +extern const char iwl_ax201_killer_1650s_name[]; +extern const char iwl_ax201_killer_1650i_name[]; +extern const char iwl_ax210_killer_1675w_name[]; +extern const char iwl_ax210_killer_1675x_name[]; +extern const char iwl9560_killer_1550i_160_name[]; +extern const char iwl9560_killer_1550s_160_name[]; +extern const char iwl_ax211_killer_1675s_name[]; +extern const char iwl_ax211_killer_1675i_name[]; +extern const char iwl_ax411_killer_1690s_name[]; +extern const char iwl_ax411_killer_1690i_name[]; +extern const char iwl_ax211_name[]; +extern const char iwl_ax221_name[]; +extern const char iwl_ax231_name[]; +extern const char iwl_ax411_name[]; +extern const char iwl_bz_name[]; +#if IS_ENABLED(CONFIG_IWLDVM) +extern const struct iwl_cfg iwl5300_agn_cfg; +extern const struct iwl_cfg iwl5100_agn_cfg; +extern const struct iwl_cfg iwl5350_agn_cfg; +extern const struct iwl_cfg iwl5100_bgn_cfg; +extern const struct iwl_cfg iwl5100_abg_cfg; +extern const struct iwl_cfg iwl5150_agn_cfg; +extern const struct iwl_cfg iwl5150_abg_cfg; +extern const struct iwl_cfg iwl6005_2agn_cfg; +extern const struct iwl_cfg iwl6005_2abg_cfg; +extern const struct iwl_cfg iwl6005_2bg_cfg; +extern const struct iwl_cfg iwl6005_2agn_sff_cfg; +extern const struct iwl_cfg iwl6005_2agn_d_cfg; +extern const struct iwl_cfg iwl6005_2agn_mow1_cfg; +extern const struct iwl_cfg iwl6005_2agn_mow2_cfg; +extern const struct iwl_cfg iwl1030_bgn_cfg; +extern const struct iwl_cfg iwl1030_bg_cfg; +extern const struct iwl_cfg iwl6030_2agn_cfg; +extern const struct iwl_cfg iwl6030_2abg_cfg; +extern const struct iwl_cfg iwl6030_2bgn_cfg; +extern const struct iwl_cfg iwl6030_2bg_cfg; +extern const struct iwl_cfg iwl6000i_2agn_cfg; +extern const struct iwl_cfg iwl6000i_2abg_cfg; +extern const struct iwl_cfg iwl6000i_2bg_cfg; +extern const struct iwl_cfg iwl6000_3agn_cfg; +extern const struct iwl_cfg iwl6050_2agn_cfg; +extern const struct iwl_cfg iwl6050_2abg_cfg; +extern const struct iwl_cfg iwl6150_bgn_cfg; +extern const struct iwl_cfg iwl6150_bg_cfg; +extern const struct iwl_cfg iwl1000_bgn_cfg; +extern const struct iwl_cfg iwl1000_bg_cfg; +extern const struct iwl_cfg iwl100_bgn_cfg; +extern const struct iwl_cfg iwl100_bg_cfg; +extern const struct iwl_cfg iwl130_bgn_cfg; +extern const struct iwl_cfg iwl130_bg_cfg; +extern const struct iwl_cfg iwl2000_2bgn_cfg; +extern const struct iwl_cfg iwl2000_2bgn_d_cfg; +extern const struct iwl_cfg iwl2030_2bgn_cfg; +extern const struct iwl_cfg iwl6035_2agn_cfg; +extern const struct iwl_cfg iwl6035_2agn_sff_cfg; +extern const struct iwl_cfg iwl105_bgn_cfg; +extern const struct iwl_cfg iwl105_bgn_d_cfg; +extern const struct iwl_cfg iwl135_bgn_cfg; +#endif /* CONFIG_IWLDVM */ +#if IS_ENABLED(CONFIG_IWLMVM) +extern const struct iwl_cfg iwl7260_2ac_cfg; +extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp; +extern const struct iwl_cfg iwl7260_2n_cfg; +extern const struct iwl_cfg iwl7260_n_cfg; +extern const struct iwl_cfg iwl3160_2ac_cfg; +extern const struct iwl_cfg iwl3160_2n_cfg; +extern const struct iwl_cfg iwl3160_n_cfg; +extern const struct iwl_cfg iwl3165_2ac_cfg; +extern const struct iwl_cfg iwl3168_2ac_cfg; +extern const struct iwl_cfg iwl7265_2ac_cfg; +extern const struct iwl_cfg iwl7265_2n_cfg; +extern const struct iwl_cfg iwl7265_n_cfg; +extern const struct iwl_cfg iwl7265d_2ac_cfg; +extern const struct iwl_cfg iwl7265d_2n_cfg; +extern const struct iwl_cfg iwl7265d_n_cfg; +extern const struct iwl_cfg iwl8260_2n_cfg; +extern const struct iwl_cfg iwl8260_2ac_cfg; +extern const struct iwl_cfg iwl8265_2ac_cfg; +extern const struct iwl_cfg iwl8275_2ac_cfg; +extern const struct iwl_cfg iwl4165_2ac_cfg; +extern const struct iwl_cfg iwl9260_2ac_cfg; +extern const struct iwl_cfg iwl9560_qu_b0_jf_b0_cfg; +extern const struct iwl_cfg iwl9560_qu_c0_jf_b0_cfg; +extern const struct iwl_cfg iwl9560_quz_a0_jf_b0_cfg; +extern const struct iwl_cfg iwl9560_qnj_b0_jf_b0_cfg; +extern const struct iwl_cfg iwl9560_2ac_cfg_soc; +extern const struct iwl_cfg iwl_qu_b0_hr1_b0; +extern const struct iwl_cfg iwl_qu_c0_hr1_b0; +extern const struct iwl_cfg iwl_quz_a0_hr1_b0; +extern const struct iwl_cfg iwl_qu_b0_hr_b0; +extern const struct iwl_cfg iwl_qu_c0_hr_b0; +extern const struct iwl_cfg iwl_ax200_cfg_cc; +extern const struct iwl_cfg iwl_ax201_cfg_qu_hr; +extern const struct iwl_cfg iwl_ax201_cfg_qu_c0_hr_b0; +extern const struct iwl_cfg iwl_ax201_cfg_quz_hr; +extern const struct iwl_cfg iwl_ax1650i_cfg_quz_hr; +extern const struct iwl_cfg iwl_ax1650s_cfg_quz_hr; +extern const struct iwl_cfg killer1650s_2ax_cfg_qu_b0_hr_b0; +extern const struct iwl_cfg killer1650i_2ax_cfg_qu_b0_hr_b0; +extern const struct iwl_cfg killer1650s_2ax_cfg_qu_c0_hr_b0; +extern const struct iwl_cfg killer1650i_2ax_cfg_qu_c0_hr_b0; +extern const struct iwl_cfg killer1650x_2ax_cfg; +extern const struct iwl_cfg killer1650w_2ax_cfg; +extern const struct iwl_cfg iwl_qnj_b0_hr_b0_cfg; +extern const struct iwl_cfg iwlax210_2ax_cfg_so_jf_b0; +extern const struct iwl_cfg iwlax211_2ax_cfg_so_gf_a0; +extern const struct iwl_cfg iwlax211_2ax_cfg_so_gf_a0_long; +extern const struct iwl_cfg iwlax210_2ax_cfg_ty_gf_a0; +extern const struct iwl_cfg iwlax411_2ax_cfg_so_gf4_a0; +extern const struct iwl_cfg iwlax411_2ax_cfg_so_gf4_a0_long; +extern const struct iwl_cfg iwlax411_2ax_cfg_sosnj_gf4_a0; +extern const struct iwl_cfg iwlax211_cfg_snj_gf_a0; +extern const struct iwl_cfg iwl_cfg_snj_hr_b0; +extern const struct iwl_cfg iwl_cfg_snj_a0_jf_b0; +extern const struct iwl_cfg iwl_cfg_ma_a0_hr_b0; +extern const struct iwl_cfg iwl_cfg_ma_a0_gf_a0; +extern const struct iwl_cfg iwl_cfg_ma_a0_gf4_a0; +extern const struct iwl_cfg iwl_cfg_ma_a0_mr_a0; +extern const struct iwl_cfg iwl_cfg_ma_a0_ms_a0; +extern const struct iwl_cfg iwl_cfg_ma_a0_fm_a0; +extern const struct iwl_cfg iwl_cfg_snj_a0_mr_a0; +extern const struct iwl_cfg iwl_cfg_snj_a0_ms_a0; +extern const struct iwl_cfg iwl_cfg_so_a0_hr_a0; +extern const struct iwl_cfg iwl_cfg_so_a0_ms_a0; +extern const struct iwl_cfg iwl_cfg_quz_a0_hr_b0; +extern const struct iwl_cfg iwl_cfg_bz_a0_hr_b0; +extern const struct iwl_cfg iwl_cfg_bz_a0_gf_a0; +extern const struct iwl_cfg iwl_cfg_bz_a0_gf4_a0; +extern const struct iwl_cfg iwl_cfg_bz_a0_mr_a0; +extern const struct iwl_cfg iwl_cfg_bz_a0_fm_a0; +extern const struct iwl_cfg iwl_cfg_bz_a0_fm4_a0; +extern const struct iwl_cfg iwl_cfg_gl_a0_fm_a0; +extern const struct iwl_cfg iwl_cfg_gl_b0_fm_b0; +extern const struct iwl_cfg iwl_cfg_bz_z0_gf_a0; +extern const struct iwl_cfg iwl_cfg_bnj_a0_fm_a0; +extern const struct iwl_cfg iwl_cfg_bnj_a0_fm4_a0; +extern const struct iwl_cfg iwl_cfg_bnj_a0_gf_a0; +extern const struct iwl_cfg iwl_cfg_bnj_a0_gf4_a0; +extern const struct iwl_cfg iwl_cfg_bnj_a0_hr_b0; +extern const struct iwl_cfg iwl_cfg_bnj_b0_fm_b0; +#endif /* CONFIG_IWLMVM */ + +#endif /* __IWL_CONFIG_H__ */ -- cgit v1.2.3