From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/intersil/hostap/hostap_proc.c | 411 +++++++++++++++++++++ 1 file changed, 411 insertions(+) create mode 100644 drivers/net/wireless/intersil/hostap/hostap_proc.c (limited to 'drivers/net/wireless/intersil/hostap/hostap_proc.c') diff --git a/drivers/net/wireless/intersil/hostap/hostap_proc.c b/drivers/net/wireless/intersil/hostap/hostap_proc.c new file mode 100644 index 000000000..61f687860 --- /dev/null +++ b/drivers/net/wireless/intersil/hostap/hostap_proc.c @@ -0,0 +1,411 @@ +// SPDX-License-Identifier: GPL-2.0 +/* /proc routines for Host AP driver */ + +#include +#include +#include +#include + +#include "hostap_wlan.h" +#include "hostap.h" + +#define PROC_LIMIT (PAGE_SIZE - 80) + +#if !defined(PRISM2_NO_PROCFS_DEBUG) && defined(CONFIG_PROC_FS) +static int prism2_debug_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + int i; + + seq_printf(m, "next_txfid=%d next_alloc=%d\n", + local->next_txfid, local->next_alloc); + for (i = 0; i < PRISM2_TXFID_COUNT; i++) + seq_printf(m, "FID: tx=%04X intransmit=%04X\n", + local->txfid[i], local->intransmitfid[i]); + seq_printf(m, "FW TX rate control: %d\n", local->fw_tx_rate_control); + seq_printf(m, "beacon_int=%d\n", local->beacon_int); + seq_printf(m, "dtim_period=%d\n", local->dtim_period); + seq_printf(m, "wds_max_connections=%d\n", local->wds_max_connections); + seq_printf(m, "dev_enabled=%d\n", local->dev_enabled); + seq_printf(m, "sw_tick_stuck=%d\n", local->sw_tick_stuck); + for (i = 0; i < WEP_KEYS; i++) { + if (local->crypt_info.crypt[i] && + local->crypt_info.crypt[i]->ops) { + seq_printf(m, "crypt[%d]=%s\n", i, + local->crypt_info.crypt[i]->ops->name); + } + } + seq_printf(m, "pri_only=%d\n", local->pri_only); + seq_printf(m, "pci=%d\n", local->func->hw_type == HOSTAP_HW_PCI); + seq_printf(m, "sram_type=%d\n", local->sram_type); + seq_printf(m, "no_pri=%d\n", local->no_pri); + + return 0; +} +#endif + +#ifdef CONFIG_PROC_FS +static int prism2_stats_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + struct comm_tallies_sums *sums = &local->comm_tallies; + + seq_printf(m, "TxUnicastFrames=%u\n", sums->tx_unicast_frames); + seq_printf(m, "TxMulticastframes=%u\n", sums->tx_multicast_frames); + seq_printf(m, "TxFragments=%u\n", sums->tx_fragments); + seq_printf(m, "TxUnicastOctets=%u\n", sums->tx_unicast_octets); + seq_printf(m, "TxMulticastOctets=%u\n", sums->tx_multicast_octets); + seq_printf(m, "TxDeferredTransmissions=%u\n", + sums->tx_deferred_transmissions); + seq_printf(m, "TxSingleRetryFrames=%u\n", sums->tx_single_retry_frames); + seq_printf(m, "TxMultipleRetryFrames=%u\n", + sums->tx_multiple_retry_frames); + seq_printf(m, "TxRetryLimitExceeded=%u\n", + sums->tx_retry_limit_exceeded); + seq_printf(m, "TxDiscards=%u\n", sums->tx_discards); + seq_printf(m, "RxUnicastFrames=%u\n", sums->rx_unicast_frames); + seq_printf(m, "RxMulticastFrames=%u\n", sums->rx_multicast_frames); + seq_printf(m, "RxFragments=%u\n", sums->rx_fragments); + seq_printf(m, "RxUnicastOctets=%u\n", sums->rx_unicast_octets); + seq_printf(m, "RxMulticastOctets=%u\n", sums->rx_multicast_octets); + seq_printf(m, "RxFCSErrors=%u\n", sums->rx_fcs_errors); + seq_printf(m, "RxDiscardsNoBuffer=%u\n", sums->rx_discards_no_buffer); + seq_printf(m, "TxDiscardsWrongSA=%u\n", sums->tx_discards_wrong_sa); + seq_printf(m, "RxDiscardsWEPUndecryptable=%u\n", + sums->rx_discards_wep_undecryptable); + seq_printf(m, "RxMessageInMsgFragments=%u\n", + sums->rx_message_in_msg_fragments); + seq_printf(m, "RxMessageInBadMsgFragments=%u\n", + sums->rx_message_in_bad_msg_fragments); + /* FIX: this may grow too long for one page(?) */ + + return 0; +} +#endif + +static int prism2_wds_proc_show(struct seq_file *m, void *v) +{ + struct list_head *ptr = v; + struct hostap_interface *iface; + + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_WDS) + seq_printf(m, "%s\t%pM\n", + iface->dev->name, iface->u.wds.remote_addr); + return 0; +} + +static void *prism2_wds_proc_start(struct seq_file *m, loff_t *_pos) +{ + local_info_t *local = pde_data(file_inode(m->file)); + read_lock_bh(&local->iface_lock); + return seq_list_start(&local->hostap_interfaces, *_pos); +} + +static void *prism2_wds_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + local_info_t *local = pde_data(file_inode(m->file)); + return seq_list_next(v, &local->hostap_interfaces, _pos); +} + +static void prism2_wds_proc_stop(struct seq_file *m, void *v) +{ + local_info_t *local = pde_data(file_inode(m->file)); + read_unlock_bh(&local->iface_lock); +} + +static const struct seq_operations prism2_wds_proc_seqops = { + .start = prism2_wds_proc_start, + .next = prism2_wds_proc_next, + .stop = prism2_wds_proc_stop, + .show = prism2_wds_proc_show, +}; + +static int prism2_bss_list_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = pde_data(file_inode(m->file)); + struct list_head *ptr = v; + struct hostap_bss_info *bss; + + if (ptr == &local->bss_list) { + seq_printf(m, "#BSSID\tlast_update\tcount\tcapab_info\tSSID(txt)\t" + "SSID(hex)\tWPA IE\n"); + return 0; + } + + bss = list_entry(ptr, struct hostap_bss_info, list); + seq_printf(m, "%pM\t%lu\t%u\t0x%x\t", + bss->bssid, bss->last_update, + bss->count, bss->capab_info); + + seq_printf(m, "%*pE", (int)bss->ssid_len, bss->ssid); + + seq_putc(m, '\t'); + seq_printf(m, "%*phN", (int)bss->ssid_len, bss->ssid); + seq_putc(m, '\t'); + seq_printf(m, "%*phN", (int)bss->wpa_ie_len, bss->wpa_ie); + seq_putc(m, '\n'); + return 0; +} + +static void *prism2_bss_list_proc_start(struct seq_file *m, loff_t *_pos) + __acquires(&local->lock) +{ + local_info_t *local = pde_data(file_inode(m->file)); + spin_lock_bh(&local->lock); + return seq_list_start_head(&local->bss_list, *_pos); +} + +static void *prism2_bss_list_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + local_info_t *local = pde_data(file_inode(m->file)); + return seq_list_next(v, &local->bss_list, _pos); +} + +static void prism2_bss_list_proc_stop(struct seq_file *m, void *v) + __releases(&local->lock) +{ + local_info_t *local = pde_data(file_inode(m->file)); + spin_unlock_bh(&local->lock); +} + +static const struct seq_operations prism2_bss_list_proc_seqops = { + .start = prism2_bss_list_proc_start, + .next = prism2_bss_list_proc_next, + .stop = prism2_bss_list_proc_stop, + .show = prism2_bss_list_proc_show, +}; + +#ifdef CONFIG_PROC_FS +static int prism2_crypt_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = m->private; + int i; + + seq_printf(m, "tx_keyidx=%d\n", local->crypt_info.tx_keyidx); + for (i = 0; i < WEP_KEYS; i++) { + if (local->crypt_info.crypt[i] && + local->crypt_info.crypt[i]->ops && + local->crypt_info.crypt[i]->ops->print_stats) { + local->crypt_info.crypt[i]->ops->print_stats( + m, local->crypt_info.crypt[i]->priv); + } + } + return 0; +} +#endif + +static ssize_t prism2_pda_proc_read(struct file *file, char __user *buf, + size_t count, loff_t *_pos) +{ + local_info_t *local = pde_data(file_inode(file)); + size_t off; + + if (local->pda == NULL || *_pos >= PRISM2_PDA_SIZE) + return 0; + + off = *_pos; + if (count > PRISM2_PDA_SIZE - off) + count = PRISM2_PDA_SIZE - off; + if (copy_to_user(buf, local->pda + off, count) != 0) + return -EFAULT; + *_pos += count; + return count; +} + +static const struct proc_ops prism2_pda_proc_ops = { + .proc_read = prism2_pda_proc_read, + .proc_lseek = generic_file_llseek, +}; + + +static ssize_t prism2_aux_dump_proc_no_read(struct file *file, char __user *buf, + size_t bufsize, loff_t *_pos) +{ + return 0; +} + +static const struct proc_ops prism2_aux_dump_proc_ops = { + .proc_read = prism2_aux_dump_proc_no_read, + .proc_lseek = default_llseek, +}; + + +#ifdef PRISM2_IO_DEBUG +static int prism2_io_debug_proc_read(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + local_info_t *local = (local_info_t *) data; + int head = local->io_debug_head; + int start_bytes, left, copy; + + if (off + count > PRISM2_IO_DEBUG_SIZE * 4) { + *eof = 1; + if (off >= PRISM2_IO_DEBUG_SIZE * 4) + return 0; + count = PRISM2_IO_DEBUG_SIZE * 4 - off; + } + + start_bytes = (PRISM2_IO_DEBUG_SIZE - head) * 4; + left = count; + + if (off < start_bytes) { + copy = start_bytes - off; + if (copy > count) + copy = count; + memcpy(page, ((u8 *) &local->io_debug[head]) + off, copy); + left -= copy; + if (left > 0) + memcpy(&page[copy], local->io_debug, left); + } else { + memcpy(page, ((u8 *) local->io_debug) + (off - start_bytes), + left); + } + + *start = page; + + return count; +} +#endif /* PRISM2_IO_DEBUG */ + + +#ifndef PRISM2_NO_STATION_MODES +static int prism2_scan_results_proc_show(struct seq_file *m, void *v) +{ + local_info_t *local = pde_data(file_inode(m->file)); + unsigned long entry; + int i, len; + struct hfa384x_hostscan_result *scanres; + u8 *p; + + if (v == SEQ_START_TOKEN) { + seq_printf(m, + "CHID ANL SL BcnInt Capab Rate BSSID ATIM SupRates SSID\n"); + return 0; + } + + entry = (unsigned long)v - 2; + scanres = &local->last_scan_results[entry]; + + seq_printf(m, "%d %d %d %d 0x%02x %d %pM %d ", + le16_to_cpu(scanres->chid), + (s16) le16_to_cpu(scanres->anl), + (s16) le16_to_cpu(scanres->sl), + le16_to_cpu(scanres->beacon_interval), + le16_to_cpu(scanres->capability), + le16_to_cpu(scanres->rate), + scanres->bssid, + le16_to_cpu(scanres->atim)); + + p = scanres->sup_rates; + for (i = 0; i < sizeof(scanres->sup_rates); i++) { + if (p[i] == 0) + break; + seq_printf(m, "<%02x>", p[i]); + } + seq_putc(m, ' '); + + p = scanres->ssid; + len = le16_to_cpu(scanres->ssid_len); + if (len > 32) + len = 32; + for (i = 0; i < len; i++) { + unsigned char c = p[i]; + if (c >= 32 && c < 127) + seq_putc(m, c); + else + seq_printf(m, "<%02x>", c); + } + seq_putc(m, '\n'); + return 0; +} + +static void *prism2_scan_results_proc_start(struct seq_file *m, loff_t *_pos) +{ + local_info_t *local = pde_data(file_inode(m->file)); + spin_lock_bh(&local->lock); + + /* We have a header (pos 0) + N results to show (pos 1...N) */ + if (*_pos > local->last_scan_results_count) + return NULL; + return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */ +} + +static void *prism2_scan_results_proc_next(struct seq_file *m, void *v, loff_t *_pos) +{ + local_info_t *local = pde_data(file_inode(m->file)); + + ++*_pos; + if (*_pos > local->last_scan_results_count) + return NULL; + return (void *)(unsigned long)(*_pos + 1); /* 0 would be EOF */ +} + +static void prism2_scan_results_proc_stop(struct seq_file *m, void *v) +{ + local_info_t *local = pde_data(file_inode(m->file)); + spin_unlock_bh(&local->lock); +} + +static const struct seq_operations prism2_scan_results_proc_seqops = { + .start = prism2_scan_results_proc_start, + .next = prism2_scan_results_proc_next, + .stop = prism2_scan_results_proc_stop, + .show = prism2_scan_results_proc_show, +}; +#endif /* PRISM2_NO_STATION_MODES */ + + +void hostap_init_proc(local_info_t *local) +{ + local->proc = NULL; + + if (hostap_proc == NULL) { + printk(KERN_WARNING "%s: hostap proc directory not created\n", + local->dev->name); + return; + } + + local->proc = proc_mkdir(local->ddev->name, hostap_proc); + if (local->proc == NULL) { + printk(KERN_INFO "/proc/net/hostap/%s creation failed\n", + local->ddev->name); + return; + } + +#ifndef PRISM2_NO_PROCFS_DEBUG + proc_create_single_data("debug", 0, local->proc, + prism2_debug_proc_show, local); +#endif /* PRISM2_NO_PROCFS_DEBUG */ + proc_create_single_data("stats", 0, local->proc, prism2_stats_proc_show, + local); + proc_create_seq_data("wds", 0, local->proc, + &prism2_wds_proc_seqops, local); + proc_create_data("pda", 0, local->proc, + &prism2_pda_proc_ops, local); + proc_create_data("aux_dump", 0, local->proc, + local->func->read_aux_proc_ops ?: &prism2_aux_dump_proc_ops, + local); + proc_create_seq_data("bss_list", 0, local->proc, + &prism2_bss_list_proc_seqops, local); + proc_create_single_data("crypt", 0, local->proc, prism2_crypt_proc_show, + local); +#ifdef PRISM2_IO_DEBUG + proc_create_single_data("io_debug", 0, local->proc, + prism2_debug_proc_show, local); +#endif /* PRISM2_IO_DEBUG */ +#ifndef PRISM2_NO_STATION_MODES + proc_create_seq_data("scan_results", 0, local->proc, + &prism2_scan_results_proc_seqops, local); +#endif /* PRISM2_NO_STATION_MODES */ +} + + +void hostap_remove_proc(local_info_t *local) +{ + proc_remove(local->proc); +} + + +EXPORT_SYMBOL(hostap_init_proc); +EXPORT_SYMBOL(hostap_remove_proc); -- cgit v1.2.3