From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/mac80211_hwsim.h | 280 ++++++++++++++++++++++++++++++++++ 1 file changed, 280 insertions(+) create mode 100644 drivers/net/wireless/mac80211_hwsim.h (limited to 'drivers/net/wireless/mac80211_hwsim.h') diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h new file mode 100644 index 000000000..527799b2d --- /dev/null +++ b/drivers/net/wireless/mac80211_hwsim.h @@ -0,0 +1,280 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211 + * Copyright (c) 2008, Jouni Malinen + * Copyright (c) 2011, Javier Lopez + * Copyright (C) 2020, 2022 Intel Corporation + */ + +#ifndef __MAC80211_HWSIM_H +#define __MAC80211_HWSIM_H + +/** + * enum hwsim_tx_control_flags - flags to describe transmission info/status + * + * These flags are used to give the wmediumd extra information in order to + * modify its behavior for each frame + * + * @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame. + * @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack + * @HWSIM_TX_STAT_ACK: Frame was acknowledged + * + */ +enum hwsim_tx_control_flags { + HWSIM_TX_CTL_REQ_TX_STATUS = BIT(0), + HWSIM_TX_CTL_NO_ACK = BIT(1), + HWSIM_TX_STAT_ACK = BIT(2), +}; + +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * entities such as wmediumd to receive and process all broadcasted + * frames from a mac80211_hwsim radio device. + * + * This allow user space applications to decide if the frame should be + * dropped or not and implement a wireless medium simulator at user space. + * + * Registration is done by sending a register message to the driver and + * will be automatically unregistered if the user application doesn't + * responds to sent frames. + * Once registered the user application has to take responsibility of + * broadcasting the frames to all listening mac80211_hwsim radio + * interfaces. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + +/** + * enum hwsim_commands - supported hwsim commands + * + * @HWSIM_CMD_UNSPEC: unspecified command to catch errors + * + * @HWSIM_CMD_REGISTER: request to register and received all broadcasted + * frames by any mac80211_hwsim radio device. + * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user + * space, uses: + * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER, + * %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE, + * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE, %HWSIM_ATTR_FREQ (optional) + * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to + * kernel, uses: + * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS, + * %HWSIM_ATTR_TX_INFO, %WSIM_ATTR_TX_INFO_FLAGS, + * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE + * @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters, + * returns the radio ID (>= 0) or negative on errors, if successful + * then multicast the result, uses optional parameter: + * %HWSIM_ATTR_REG_STRICT_REG, %HWSIM_ATTR_SUPPORT_P2P_DEVICE, + * %HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, %HWSIM_ATTR_CHANNELS, + * %HWSIM_ATTR_NO_VIF, %HWSIM_ATTR_RADIO_NAME, %HWSIM_ATTR_USE_CHANCTX, + * %HWSIM_ATTR_REG_HINT_ALPHA2, %HWSIM_ATTR_REG_CUSTOM_REG, + * %HWSIM_ATTR_PERM_ADDR + * @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted + * @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses: + * %HWSIM_ATTR_RADIO_ID + * @HWSIM_CMD_ADD_MAC_ADDR: add a receive MAC address (given in the + * %HWSIM_ATTR_ADDR_RECEIVER attribute) to a device identified by + * %HWSIM_ATTR_ADDR_TRANSMITTER. This lets wmediumd forward frames + * to this receiver address for a given station. + * @HWSIM_CMD_DEL_MAC_ADDR: remove the MAC address again, the attributes + * are the same as to @HWSIM_CMD_ADD_MAC_ADDR. + * @__HWSIM_CMD_MAX: enum limit + */ +enum { + HWSIM_CMD_UNSPEC, + HWSIM_CMD_REGISTER, + HWSIM_CMD_FRAME, + HWSIM_CMD_TX_INFO_FRAME, + HWSIM_CMD_NEW_RADIO, + HWSIM_CMD_DEL_RADIO, + HWSIM_CMD_GET_RADIO, + HWSIM_CMD_ADD_MAC_ADDR, + HWSIM_CMD_DEL_MAC_ADDR, + __HWSIM_CMD_MAX, +}; +#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1) + +#define HWSIM_CMD_CREATE_RADIO HWSIM_CMD_NEW_RADIO +#define HWSIM_CMD_DESTROY_RADIO HWSIM_CMD_DEL_RADIO + +/** + * enum hwsim_attrs - hwsim netlink attributes + * + * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that + * the frame is broadcasted to + * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that + * the frame was broadcasted from + * @HWSIM_ATTR_FRAME: Data array + * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process + properly the frame at user space + * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user + space + * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user + space + * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array + * @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame + * @HWSIM_ATTR_CHANNELS: u32 attribute used with the %HWSIM_CMD_CREATE_RADIO + * command giving the number of channels supported by the new radio + * @HWSIM_ATTR_RADIO_ID: u32 attribute used with %HWSIM_CMD_DESTROY_RADIO + * only to destroy a radio + * @HWSIM_ATTR_REG_HINT_ALPHA2: alpha2 for regulatoro driver hint + * (nla string, length 2) + * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute) + * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute) + * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag) + * @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO + * command to force use of channel contexts even when only a + * single channel is supported + * @HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE: used with the %HWSIM_CMD_CREATE_RADIO + * command to force radio removal when process that created the radio dies + * @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666 + * @HWSIM_ATTR_NO_VIF: Do not create vif (wlanX) when creating radio. + * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received. + * @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding + * rates of %HWSIM_ATTR_TX_INFO + * @HWSIM_ATTR_PERM_ADDR: permanent mac address of new radio + * @HWSIM_ATTR_IFTYPE_SUPPORT: u32 attribute of supported interface types bits + * @HWSIM_ATTR_CIPHER_SUPPORT: u32 array of supported cipher types + * @HWSIM_ATTR_MLO_SUPPORT: claim MLO support (exact parameters TBD) for + * the new radio + * @__HWSIM_ATTR_MAX: enum limit + */ + + +enum { + HWSIM_ATTR_UNSPEC, + HWSIM_ATTR_ADDR_RECEIVER, + HWSIM_ATTR_ADDR_TRANSMITTER, + HWSIM_ATTR_FRAME, + HWSIM_ATTR_FLAGS, + HWSIM_ATTR_RX_RATE, + HWSIM_ATTR_SIGNAL, + HWSIM_ATTR_TX_INFO, + HWSIM_ATTR_COOKIE, + HWSIM_ATTR_CHANNELS, + HWSIM_ATTR_RADIO_ID, + HWSIM_ATTR_REG_HINT_ALPHA2, + HWSIM_ATTR_REG_CUSTOM_REG, + HWSIM_ATTR_REG_STRICT_REG, + HWSIM_ATTR_SUPPORT_P2P_DEVICE, + HWSIM_ATTR_USE_CHANCTX, + HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, + HWSIM_ATTR_RADIO_NAME, + HWSIM_ATTR_NO_VIF, + HWSIM_ATTR_FREQ, + HWSIM_ATTR_PAD, + HWSIM_ATTR_TX_INFO_FLAGS, + HWSIM_ATTR_PERM_ADDR, + HWSIM_ATTR_IFTYPE_SUPPORT, + HWSIM_ATTR_CIPHER_SUPPORT, + HWSIM_ATTR_MLO_SUPPORT, + __HWSIM_ATTR_MAX, +}; +#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1) + +/** + * struct hwsim_tx_rate - rate selection/status + * + * @idx: rate index to attempt to send with + * @count: number of tries in this rate before going to the next rate + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate and number of retries used. + * + */ +struct hwsim_tx_rate { + s8 idx; + u8 count; +} __packed; + +/** + * enum hwsim_tx_rate_flags - per-rate flags set by the rate control algorithm. + * Inspired by structure mac80211_rate_control_flags. New flags may be + * appended, but old flags not deleted, to keep compatibility for + * userspace. + * + * These flags are set by the Rate control algorithm for each rate during tx, + * in the @flags member of struct ieee80211_tx_rate. + * + * @MAC80211_HWSIM_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate. + * @MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required. + * This is set if the current BSS requires ERP protection. + * @MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE: Use short preamble. + * @MAC80211_HWSIM_TX_RC_MCS: HT rate. + * @MAC80211_HWSIM_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is + * split into a higher 4 bits (Nss) and lower 4 bits (MCS number) + * @MAC80211_HWSIM_TX_RC_GREEN_FIELD: Indicates whether this rate should be used + * in Greenfield mode. + * @MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be + * 40 MHz. + * @MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission + * @MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission + * (80+80 isn't supported yet) + * @MAC80211_HWSIM_TX_RC_DUP_DATA: The frame should be transmitted on both of + * the adjacent 20 MHz channels, if the current channel type is + * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS. + * @MAC80211_HWSIM_TX_RC_SHORT_GI: Short Guard interval should be used for this + * rate. + */ +enum hwsim_tx_rate_flags { + MAC80211_HWSIM_TX_RC_USE_RTS_CTS = BIT(0), + MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT = BIT(1), + MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE = BIT(2), + + /* rate index is an HT/VHT MCS instead of an index */ + MAC80211_HWSIM_TX_RC_MCS = BIT(3), + MAC80211_HWSIM_TX_RC_GREEN_FIELD = BIT(4), + MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH = BIT(5), + MAC80211_HWSIM_TX_RC_DUP_DATA = BIT(6), + MAC80211_HWSIM_TX_RC_SHORT_GI = BIT(7), + MAC80211_HWSIM_TX_RC_VHT_MCS = BIT(8), + MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH = BIT(9), + MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH = BIT(10), +}; + +/** + * struct hwsim_tx_rate - rate selection/status + * + * @idx: rate index to attempt to send with + * @count: number of tries in this rate before going to the next rate + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate and number of retries used. + * + */ +struct hwsim_tx_rate_flag { + s8 idx; + u16 flags; +} __packed; + +/** + * DOC: Frame transmission support over virtio + * + * Frame transmission is also supported over virtio to allow communication + * with external entities. + */ + +/** + * enum hwsim_vqs - queues for virtio frame transmission + * + * @HWSIM_VQ_TX: send frames to external entity + * @HWSIM_VQ_RX: receive frames and transmission info reports + * @HWSIM_NUM_VQS: enum limit + */ +enum { + HWSIM_VQ_TX, + HWSIM_VQ_RX, + HWSIM_NUM_VQS, +}; +#endif /* __MAC80211_HWSIM_H */ -- cgit v1.2.3