From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/mediatek/mt76/mt76x0/init.c | 266 +++++++++++++++++++++++ 1 file changed, 266 insertions(+) create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/init.c (limited to 'drivers/net/wireless/mediatek/mt76/mt76x0/init.c') diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/init.c b/drivers/net/wireless/mediatek/mt76/mt76x0/init.c new file mode 100644 index 000000000..6257460f8 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/init.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * Copyright (C) 2018 Stanislaw Gruszka + */ + +#include "mt76x0.h" +#include "eeprom.h" +#include "mcu.h" +#include "initvals.h" +#include "initvals_init.h" +#include "../mt76x02_phy.h" + +static void +mt76x0_set_wlan_state(struct mt76x02_dev *dev, u32 val, bool enable) +{ + u32 mask = MT_CMB_CTRL_XTAL_RDY | MT_CMB_CTRL_PLL_LD; + + /* Note: we don't turn off WLAN_CLK because that makes the device + * not respond properly on the probe path. + * In case anyone (PSM?) wants to use this function we can + * bring the clock stuff back and fixup the probe path. + */ + + if (enable) + val |= (MT_WLAN_FUN_CTRL_WLAN_EN | + MT_WLAN_FUN_CTRL_WLAN_CLK_EN); + else + val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN); + + mt76_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + /* Note: vendor driver tries to disable/enable wlan here and retry + * but the code which does it is so buggy it must have never + * triggered, so don't bother. + */ + if (enable && !mt76_poll(dev, MT_CMB_CTRL, mask, mask, 2000)) + dev_err(dev->mt76.dev, "PLL and XTAL check failed\n"); +} + +void mt76x0_chip_onoff(struct mt76x02_dev *dev, bool enable, bool reset) +{ + u32 val; + + val = mt76_rr(dev, MT_WLAN_FUN_CTRL); + + if (reset) { + val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN; + val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL; + + if (val & MT_WLAN_FUN_CTRL_WLAN_EN) { + val |= (MT_WLAN_FUN_CTRL_WLAN_RESET | + MT_WLAN_FUN_CTRL_WLAN_RESET_RF); + mt76_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET | + MT_WLAN_FUN_CTRL_WLAN_RESET_RF); + } + } + + mt76_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + mt76x0_set_wlan_state(dev, val, enable); +} +EXPORT_SYMBOL_GPL(mt76x0_chip_onoff); + +static void mt76x0_reset_csr_bbp(struct mt76x02_dev *dev) +{ + mt76_wr(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_RESET_CSR | + MT_MAC_SYS_CTRL_RESET_BBP); + msleep(200); + mt76_clear(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_RESET_CSR | + MT_MAC_SYS_CTRL_RESET_BBP); +} + +#define RANDOM_WRITE(dev, tab) \ + mt76_wr_rp(dev, MT_MCU_MEMMAP_WLAN, \ + tab, ARRAY_SIZE(tab)) + +static int mt76x0_init_bbp(struct mt76x02_dev *dev) +{ + int ret, i; + + ret = mt76x0_phy_wait_bbp_ready(dev); + if (ret) + return ret; + + RANDOM_WRITE(dev, mt76x0_bbp_init_tab); + + for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) { + const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i]; + const struct mt76_reg_pair *pair = &item->reg_pair; + + if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20)) + mt76_wr(dev, pair->reg, pair->value); + } + + RANDOM_WRITE(dev, mt76x0_dcoc_tab); + + return 0; +} + +static void mt76x0_init_mac_registers(struct mt76x02_dev *dev) +{ + RANDOM_WRITE(dev, common_mac_reg_table); + + /* Enable PBF and MAC clock SYS_CTRL[11:10] = 0x3 */ + RANDOM_WRITE(dev, mt76x0_mac_reg_table); + + /* Release BBP and MAC reset MAC_SYS_CTRL[1:0] = 0x0 */ + mt76_clear(dev, MT_MAC_SYS_CTRL, 0x3); + + /* Set 0x141C[15:12]=0xF */ + mt76_set(dev, MT_EXT_CCA_CFG, 0xf000); + + mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN); + + /* + * tx_ring 9 is for mgmt frame + * tx_ring 8 is for in-band command frame. + * WMM_RG0_TXQMA: this register setting is for FCE to + * define the rule of tx_ring 9 + * WMM_RG1_TXQMA: this register setting is for FCE to + * define the rule of tx_ring 8 + */ + mt76_rmw(dev, MT_WMM_CTRL, 0x3ff, 0x201); +} + +void mt76x0_mac_stop(struct mt76x02_dev *dev) +{ + int i = 200, ok = 0; + + mt76_clear(dev, MT_TXOP_CTRL_CFG, MT_TXOP_ED_CCA_EN); + + /* Page count on TxQ */ + while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) || + (mt76_rr(dev, 0x0a30) & 0x000000ff) || + (mt76_rr(dev, 0x0a34) & 0x00ff00ff))) + msleep(10); + + if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000)) + dev_warn(dev->mt76.dev, "Warning: MAC TX did not stop!\n"); + + mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX | + MT_MAC_SYS_CTRL_ENABLE_TX); + + /* Page count on RxQ */ + for (i = 0; i < 200; i++) { + if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) && + !mt76_rr(dev, 0x0a30) && + !mt76_rr(dev, 0x0a34)) { + if (ok++ > 5) + break; + continue; + } + msleep(1); + } + + if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000)) + dev_warn(dev->mt76.dev, "Warning: MAC RX did not stop!\n"); +} +EXPORT_SYMBOL_GPL(mt76x0_mac_stop); + +int mt76x0_init_hardware(struct mt76x02_dev *dev) +{ + int ret, i, k; + + if (!mt76x02_wait_for_wpdma(&dev->mt76, 1000)) + return -EIO; + + /* Wait for ASIC ready after FW load. */ + if (!mt76x02_wait_for_mac(&dev->mt76)) + return -ETIMEDOUT; + + mt76x0_reset_csr_bbp(dev); + ret = mt76x02_mcu_function_select(dev, Q_SELECT, 1); + if (ret) + return ret; + + mt76x0_init_mac_registers(dev); + + if (!mt76x02_wait_for_txrx_idle(&dev->mt76)) + return -EIO; + + ret = mt76x0_init_bbp(dev); + if (ret) + return ret; + + dev->mt76.rxfilter = mt76_rr(dev, MT_RX_FILTR_CFG); + + for (i = 0; i < 16; i++) + for (k = 0; k < 4; k++) + mt76x02_mac_shared_key_setup(dev, i, k, NULL); + + for (i = 0; i < 256; i++) + mt76x02_mac_wcid_setup(dev, i, 0, NULL); + + ret = mt76x0_eeprom_init(dev); + if (ret) + return ret; + + mt76x0_phy_init(dev); + + return 0; +} +EXPORT_SYMBOL_GPL(mt76x0_init_hardware); + +static void +mt76x0_init_txpower(struct mt76x02_dev *dev, + struct ieee80211_supported_band *sband) +{ + struct ieee80211_channel *chan; + struct mt76x02_rate_power t; + s8 tp; + int i; + + for (i = 0; i < sband->n_channels; i++) { + chan = &sband->channels[i]; + + mt76x0_get_tx_power_per_rate(dev, chan, &t); + mt76x0_get_power_info(dev, chan, &tp); + + chan->orig_mpwr = (mt76x02_get_max_rate_power(&t) + tp) / 2; + chan->max_power = min_t(int, chan->max_reg_power, + chan->orig_mpwr); + } +} + +int mt76x0_register_device(struct mt76x02_dev *dev) +{ + int ret; + + ret = mt76x02_init_device(dev); + if (ret) + return ret; + + mt76x02_config_mac_addr_list(dev); + + ret = mt76_register_device(&dev->mt76, true, mt76x02_rates, + ARRAY_SIZE(mt76x02_rates)); + if (ret) + return ret; + + if (dev->mphy.cap.has_5ghz) { + struct ieee80211_supported_band *sband; + + sband = &dev->mphy.sband_5g.sband; + sband->vht_cap.cap &= ~IEEE80211_VHT_CAP_RXLDPC; + mt76x0_init_txpower(dev, sband); + } + + if (dev->mphy.cap.has_2ghz) + mt76x0_init_txpower(dev, &dev->mphy.sband_2g.sband); + + mt76x02_init_debugfs(dev); + + return 0; +} +EXPORT_SYMBOL_GPL(mt76x0_register_device); -- cgit v1.2.3