From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/wireless/mediatek/mt76/mt76x0/pci_mcu.c | 133 +++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/pci_mcu.c (limited to 'drivers/net/wireless/mediatek/mt76/mt76x0/pci_mcu.c') diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/pci_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x0/pci_mcu.c new file mode 100644 index 000000000..f0962507f --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/pci_mcu.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: ISC +/* + * Copyright (C) 2018 Lorenzo Bianconi + */ +#include +#include + +#include "mt76x0.h" +#include "mcu.h" + +#define MT_MCU_IVB_ADDR (MT_MCU_ILM_ADDR + 0x54000 - MT_MCU_IVB_SIZE) + +static int mt76x0e_load_firmware(struct mt76x02_dev *dev) +{ + bool is_combo_chip = mt76_chip(&dev->mt76) != 0x7610; + u32 val, ilm_len, dlm_len, offset = 0; + const struct mt76x02_fw_header *hdr; + const struct firmware *fw; + const char *firmware; + const u8 *fw_payload; + int len, err; + + if (is_combo_chip) + firmware = MT7650E_FIRMWARE; + else + firmware = MT7610E_FIRMWARE; + + err = request_firmware(&fw, firmware, dev->mt76.dev); + if (err) + return err; + + if (!fw || !fw->data || fw->size < sizeof(*hdr)) { + err = -EIO; + goto out; + } + + hdr = (const struct mt76x02_fw_header *)fw->data; + + len = sizeof(*hdr); + len += le32_to_cpu(hdr->ilm_len); + len += le32_to_cpu(hdr->dlm_len); + + if (fw->size != len) { + err = -EIO; + goto out; + } + + fw_payload = fw->data + sizeof(*hdr); + + val = le16_to_cpu(hdr->fw_ver); + dev_info(dev->mt76.dev, "Firmware Version: %d.%d.%02d\n", + (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf); + + val = le16_to_cpu(hdr->fw_ver); + dev_dbg(dev->mt76.dev, + "Firmware Version: %d.%d.%02d Build: %x Build time: %.16s\n", + (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf, + le16_to_cpu(hdr->build_ver), hdr->build_time); + + if (is_combo_chip && !mt76_poll(dev, MT_MCU_SEMAPHORE_00, 1, 1, 600)) { + dev_err(dev->mt76.dev, + "Could not get hardware semaphore for loading fw\n"); + err = -ETIMEDOUT; + goto out; + } + + /* upload ILM. */ + mt76_wr(dev, MT_MCU_PCIE_REMAP_BASE4, 0); + ilm_len = le32_to_cpu(hdr->ilm_len); + if (is_combo_chip) { + ilm_len -= MT_MCU_IVB_SIZE; + offset = MT_MCU_IVB_SIZE; + } + dev_dbg(dev->mt76.dev, "loading FW - ILM %u\n", ilm_len); + mt76_wr_copy(dev, MT_MCU_ILM_ADDR + offset, fw_payload + offset, + ilm_len); + + /* upload IVB. */ + if (is_combo_chip) { + dev_dbg(dev->mt76.dev, "loading FW - IVB %u\n", + MT_MCU_IVB_SIZE); + mt76_wr_copy(dev, MT_MCU_IVB_ADDR, fw_payload, MT_MCU_IVB_SIZE); + } + + /* upload DLM. */ + mt76_wr(dev, MT_MCU_PCIE_REMAP_BASE4, MT_MCU_DLM_OFFSET); + dlm_len = le32_to_cpu(hdr->dlm_len); + dev_dbg(dev->mt76.dev, "loading FW - DLM %u\n", dlm_len); + mt76_wr_copy(dev, MT_MCU_ILM_ADDR, + fw_payload + le32_to_cpu(hdr->ilm_len), dlm_len); + + /* trigger firmware */ + mt76_wr(dev, MT_MCU_PCIE_REMAP_BASE4, 0); + if (is_combo_chip) + mt76_wr(dev, MT_MCU_INT_LEVEL, 0x3); + else + mt76_wr(dev, MT_MCU_RESET_CTL, 0x300); + + if (!mt76_poll_msec(dev, MT_MCU_COM_REG0, 1, 1, 1000)) { + dev_err(dev->mt76.dev, "Firmware failed to start\n"); + err = -ETIMEDOUT; + goto out; + } + + mt76x02_set_ethtool_fwver(dev, hdr); + dev_dbg(dev->mt76.dev, "Firmware running!\n"); + +out: + if (is_combo_chip) + mt76_wr(dev, MT_MCU_SEMAPHORE_00, 0x1); + release_firmware(fw); + + return err; +} + +int mt76x0e_mcu_init(struct mt76x02_dev *dev) +{ + static const struct mt76_mcu_ops mt76x0e_mcu_ops = { + .mcu_send_msg = mt76x02_mcu_msg_send, + .mcu_parse_response = mt76x02_mcu_parse_response, + }; + int err; + + dev->mt76.mcu_ops = &mt76x0e_mcu_ops; + + err = mt76x0e_load_firmware(dev); + if (err < 0) + return err; + + set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state); + + return 0; +} -- cgit v1.2.3