From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/mediatek/mt76/mt76x2/init.c | 204 +++++++++++++++++++++++ 1 file changed, 204 insertions(+) create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2/init.c (limited to 'drivers/net/wireless/mediatek/mt76/mt76x2/init.c') diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/init.c new file mode 100644 index 000000000..19c139290 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/init.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: ISC +/* + * Copyright (C) 2016 Felix Fietkau + * Copyright (C) 2018 Lorenzo Bianconi + */ + +#include "mt76x2.h" +#include "eeprom.h" +#include "../mt76x02_phy.h" + +int mt76x2_set_sar_specs(struct ieee80211_hw *hw, + const struct cfg80211_sar_specs *sar) +{ + int err = -EINVAL, power = hw->conf.power_level * 2; + struct mt76x02_dev *dev = hw->priv; + struct mt76_phy *mphy = &dev->mphy; + + mutex_lock(&dev->mt76.mutex); + if (!cfg80211_chandef_valid(&mphy->chandef)) + goto out; + + err = mt76_init_sar_power(hw, sar); + if (err) + goto out; + + dev->txpower_conf = mt76_get_sar_power(mphy, mphy->chandef.chan, + power); + /* convert to per-chain power for 2x2 devices */ + dev->txpower_conf -= 6; + + if (test_bit(MT76_STATE_RUNNING, &mphy->state)) + mt76x2_phy_set_txpower(dev); +out: + mutex_unlock(&dev->mt76.mutex); + + return err; +} +EXPORT_SYMBOL_GPL(mt76x2_set_sar_specs); + +static void +mt76x2_set_wlan_state(struct mt76x02_dev *dev, bool enable) +{ + u32 val = mt76_rr(dev, MT_WLAN_FUN_CTRL); + + if (enable) + val |= (MT_WLAN_FUN_CTRL_WLAN_EN | + MT_WLAN_FUN_CTRL_WLAN_CLK_EN); + else + val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN | + MT_WLAN_FUN_CTRL_WLAN_CLK_EN); + + mt76_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); +} + +void mt76x2_reset_wlan(struct mt76x02_dev *dev, bool enable) +{ + u32 val; + + if (!enable) + goto out; + + val = mt76_rr(dev, MT_WLAN_FUN_CTRL); + + val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL; + + if (val & MT_WLAN_FUN_CTRL_WLAN_EN) { + val |= MT_WLAN_FUN_CTRL_WLAN_RESET_RF; + mt76_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + val &= ~MT_WLAN_FUN_CTRL_WLAN_RESET_RF; + } + + mt76_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + +out: + mt76x2_set_wlan_state(dev, enable); +} +EXPORT_SYMBOL_GPL(mt76x2_reset_wlan); + +void mt76_write_mac_initvals(struct mt76x02_dev *dev) +{ +#define DEFAULT_PROT_CFG_CCK \ + (FIELD_PREP(MT_PROT_CFG_RATE, 0x3) | \ + FIELD_PREP(MT_PROT_CFG_NAV, 1) | \ + FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x3f) | \ + MT_PROT_CFG_RTS_THRESH) + +#define DEFAULT_PROT_CFG_OFDM \ + (FIELD_PREP(MT_PROT_CFG_RATE, 0x2004) | \ + FIELD_PREP(MT_PROT_CFG_NAV, 1) | \ + FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x3f) | \ + MT_PROT_CFG_RTS_THRESH) + +#define DEFAULT_PROT_CFG_20 \ + (FIELD_PREP(MT_PROT_CFG_RATE, 0x2004) | \ + FIELD_PREP(MT_PROT_CFG_CTRL, 1) | \ + FIELD_PREP(MT_PROT_CFG_NAV, 1) | \ + FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x17)) + +#define DEFAULT_PROT_CFG_40 \ + (FIELD_PREP(MT_PROT_CFG_RATE, 0x2084) | \ + FIELD_PREP(MT_PROT_CFG_CTRL, 1) | \ + FIELD_PREP(MT_PROT_CFG_NAV, 1) | \ + FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x3f)) + + static const struct mt76_reg_pair vals[] = { + /* Copied from MediaTek reference source */ + { MT_PBF_SYS_CTRL, 0x00080c00 }, + { MT_PBF_CFG, 0x1efebcff }, + { MT_FCE_PSE_CTRL, 0x00000001 }, + { MT_MAC_SYS_CTRL, 0x00000000 }, + { MT_MAX_LEN_CFG, 0x003e3f00 }, + { MT_AMPDU_MAX_LEN_20M1S, 0xaaa99887 }, + { MT_AMPDU_MAX_LEN_20M2S, 0x000000aa }, + { MT_XIFS_TIME_CFG, 0x33a40d0a }, + { MT_BKOFF_SLOT_CFG, 0x00000209 }, + { MT_TBTT_SYNC_CFG, 0x00422010 }, + { MT_PWR_PIN_CFG, 0x00000000 }, + { 0x1238, 0x001700c8 }, + { MT_TX_SW_CFG0, 0x00101001 }, + { MT_TX_SW_CFG1, 0x00010000 }, + { MT_TX_SW_CFG2, 0x00000000 }, + { MT_TXOP_CTRL_CFG, 0x0400583f }, + { MT_TX_RTS_CFG, 0x00ffff20 }, + { MT_TX_TIMEOUT_CFG, 0x000a2290 }, + { MT_TX_RETRY_CFG, 0x47f01f0f }, + { MT_EXP_ACK_TIME, 0x002c00dc }, + { MT_TX_PROT_CFG6, 0xe3f42004 }, + { MT_TX_PROT_CFG7, 0xe3f42084 }, + { MT_TX_PROT_CFG8, 0xe3f42104 }, + { MT_PIFS_TX_CFG, 0x00060fff }, + { MT_RX_FILTR_CFG, 0x00015f97 }, + { MT_LEGACY_BASIC_RATE, 0x0000017f }, + { MT_HT_BASIC_RATE, 0x00004003 }, + { MT_PN_PAD_MODE, 0x00000003 }, + { MT_TXOP_HLDR_ET, 0x00000002 }, + { 0xa44, 0x00000000 }, + { MT_HEADER_TRANS_CTRL_REG, 0x00000000 }, + { MT_TSO_CTRL, 0x00000000 }, + { MT_AUX_CLK_CFG, 0x00000000 }, + { MT_DACCLK_EN_DLY_CFG, 0x00000000 }, + { MT_TX_ALC_CFG_4, 0x00000000 }, + { MT_TX_ALC_VGA3, 0x00000000 }, + { MT_TX_PWR_CFG_0, 0x3a3a3a3a }, + { MT_TX_PWR_CFG_1, 0x3a3a3a3a }, + { MT_TX_PWR_CFG_2, 0x3a3a3a3a }, + { MT_TX_PWR_CFG_3, 0x3a3a3a3a }, + { MT_TX_PWR_CFG_4, 0x3a3a3a3a }, + { MT_TX_PWR_CFG_7, 0x3a3a3a3a }, + { MT_TX_PWR_CFG_8, 0x0000003a }, + { MT_TX_PWR_CFG_9, 0x0000003a }, + { MT_EFUSE_CTRL, 0x0000d000 }, + { MT_PAUSE_ENABLE_CONTROL1, 0x0000000a }, + { MT_FCE_WLAN_FLOW_CONTROL1, 0x60401c18 }, + { MT_WPDMA_DELAY_INT_CFG, 0x94ff0000 }, + { MT_TX_SW_CFG3, 0x00000004 }, + { MT_HT_FBK_TO_LEGACY, 0x00001818 }, + { MT_VHT_HT_FBK_CFG1, 0xedcba980 }, + { MT_PROT_AUTO_TX_CFG, 0x00830083 }, + { MT_HT_CTRL_CFG, 0x000001ff }, + { MT_TX_LINK_CFG, 0x00001020 }, + }; + struct mt76_reg_pair prot_vals[] = { + { MT_CCK_PROT_CFG, DEFAULT_PROT_CFG_CCK }, + { MT_OFDM_PROT_CFG, DEFAULT_PROT_CFG_OFDM }, + { MT_MM20_PROT_CFG, DEFAULT_PROT_CFG_20 }, + { MT_MM40_PROT_CFG, DEFAULT_PROT_CFG_40 }, + { MT_GF20_PROT_CFG, DEFAULT_PROT_CFG_20 }, + { MT_GF40_PROT_CFG, DEFAULT_PROT_CFG_40 }, + }; + + mt76_wr_rp(dev, 0, vals, ARRAY_SIZE(vals)); + mt76_wr_rp(dev, 0, prot_vals, ARRAY_SIZE(prot_vals)); +} +EXPORT_SYMBOL_GPL(mt76_write_mac_initvals); + +void mt76x2_init_txpower(struct mt76x02_dev *dev, + struct ieee80211_supported_band *sband) +{ + struct ieee80211_channel *chan; + struct mt76x2_tx_power_info txp; + struct mt76x02_rate_power t = {}; + int i; + + for (i = 0; i < sband->n_channels; i++) { + chan = &sband->channels[i]; + + mt76x2_get_power_info(dev, &txp, chan); + mt76x2_get_rate_power(dev, &t, chan); + + chan->orig_mpwr = mt76x02_get_max_rate_power(&t) + + txp.target_power; + chan->orig_mpwr = DIV_ROUND_UP(chan->orig_mpwr, 2); + + /* convert to combined output power on 2x2 devices */ + chan->orig_mpwr += 3; + chan->max_power = min_t(int, chan->max_reg_power, + chan->orig_mpwr); + } +} +EXPORT_SYMBOL_GPL(mt76x2_init_txpower); -- cgit v1.2.3