From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/mediatek/mt7601u/phy.c | 1258 +++++++++++++++++++++++++++ 1 file changed, 1258 insertions(+) create mode 100644 drivers/net/wireless/mediatek/mt7601u/phy.c (limited to 'drivers/net/wireless/mediatek/mt7601u/phy.c') diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c new file mode 100644 index 000000000..d4cd2215a --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/phy.c @@ -0,0 +1,1258 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + */ + +#include "mt7601u.h" +#include "mcu.h" +#include "eeprom.h" +#include "trace.h" +#include "initvals_phy.h" + +#include + +static void mt7601u_agc_reset(struct mt7601u_dev *dev); + +static int +mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value) +{ + int ret = 0; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + WARN_ON(offset > 63)) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) { + ret = -ETIMEDOUT; + goto out; + } + + mt7601u_wr(dev, MT_RF_CSR_CFG, + FIELD_PREP(MT_RF_CSR_CFG_DATA, value) | + FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | + FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | + MT_RF_CSR_CFG_WR | + MT_RF_CSR_CFG_KICK); + trace_rf_write(dev, bank, offset, value); +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n", + bank, offset, ret); + + return ret; +} + +static int +mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset) +{ + int ret = -ETIMEDOUT; + u32 val; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + WARN_ON(offset > 63)) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0xff; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) + goto out; + + mt7601u_wr(dev, MT_RF_CSR_CFG, + FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | + FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) | + MT_RF_CSR_CFG_KICK); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) + goto out; + + val = mt7601u_rr(dev, MT_RF_CSR_CFG); + if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset && + FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) { + ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val); + trace_rf_read(dev, bank, offset, ret); + } +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n", + bank, offset, ret); + + return ret; +} + +static int +mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_rf_rr(dev, bank, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + ret = mt7601u_rf_wr(dev, bank, offset, val); + if (ret) + return ret; + + return val; +} + +static int +mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val) +{ + return mt7601u_rf_rmw(dev, bank, offset, 0, val); +} + +static int +mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask) +{ + return mt7601u_rf_rmw(dev, bank, offset, mask, 0); +} + +static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val) +{ + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) { + dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset); + goto out; + } + + mt7601u_wr(dev, MT_BBP_CSR_CFG, + FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) | + FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | + MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY); + trace_bbp_write(dev, offset, val); +out: + mutex_unlock(&dev->reg_atomic_mutex); +} + +static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset) +{ + u32 val; + int ret = -ETIMEDOUT; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state))) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0xff; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) + goto out; + + mt7601u_wr(dev, MT_BBP_CSR_CFG, + FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) | + MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY | + MT_BBP_CSR_CFG_READ); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) + goto out; + + val = mt7601u_rr(dev, MT_BBP_CSR_CFG); + if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) { + ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val); + trace_bbp_read(dev, offset, ret); + } +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n", + offset, ret); + + return ret; +} + +static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_bbp_rr(dev, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + mt7601u_bbp_wr(dev, offset, val); + + return val; +} + +static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_bbp_rr(dev, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + if (ret != val) + mt7601u_bbp_wr(dev, offset, val); + + return val; +} + +int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev) +{ + int i = 20; + u8 val; + + do { + val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION); + if (val && val != 0xff) + break; + } while (--i); + + if (!i) { + dev_err(dev->dev, "Error: BBP is not ready\n"); + return -EIO; + } + + return 0; +} + +u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below) +{ + return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0); +} + +int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, + struct mt7601u_rxwi *rxwi, u16 rate) +{ + static const s8 lna[2][2][3] = { + /* main LNA */ { + /* bw20 */ { -2, 15, 33 }, + /* bw40 */ { 0, 16, 34 } + }, + /* aux LNA */ { + /* bw20 */ { -2, 15, 33 }, + /* bw40 */ { -2, 16, 34 } + } + }; + int bw = FIELD_GET(MT_RXWI_RATE_BW, rate); + int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant); + int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain); + int val; + + if (lna_id) /* LNA id can be 0, 2, 3. */ + lna_id--; + + val = 8; + val -= lna[aux_lna][bw][lna_id]; + val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain); + val -= dev->ee->lna_gain; + val -= dev->ee->rssi_offset[0]; + + return val; +} + +static void mt7601u_vco_cal(struct mt7601u_dev *dev) +{ + mt7601u_rf_wr(dev, 0, 4, 0x0a); + mt7601u_rf_wr(dev, 0, 5, 0x20); + mt7601u_rf_set(dev, 0, 4, BIT(7)); + msleep(2); +} + +static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal) +{ + u32 filter = 0; + int ret; + + if (!cal) + filter |= 0x10000; + if (dev->bw != MT_BW_20) + filter |= 0x00100; + + /* TX */ + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1); + if (ret) + return ret; + /* RX */ + return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter); +} + +static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev) +{ + const struct reg_table *t; + + if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW)) + return -EINVAL; + + t = &bbp_mode_table[dev->temp_mode][dev->bw]; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n); +} + +static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name) +{ + const struct reg_table *t; + int ret; + + if (dev->temp_mode == mode) + return 0; + + dev->temp_mode = mode; + trace_temp_mode(dev, mode); + + t = bbp_mode_table[dev->temp_mode]; + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + t[2].regs, t[2].n); + if (ret) + return ret; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + t[dev->bw].regs, t[dev->bw].n); +} + +static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan) +{ + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + + if (hw_chan != 14 || dev->bw != MT_BW_20) { + mt7601u_bbp_rmw(dev, 4, 0x20, 0); + mt7601u_bbp_wr(dev, 178, 0xff); + + t->cck[0].bw20 = dev->ee->real_cck_bw20[0]; + t->cck[1].bw20 = dev->ee->real_cck_bw20[1]; + } else { /* Apply CH14 OBW fixup */ + mt7601u_bbp_wr(dev, 4, 0x60); + mt7601u_bbp_wr(dev, 178, 0); + + /* Note: vendor code is buggy here for negative values */ + t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2; + t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2; + } +} + +static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef) +{ +#define FREQ_PLAN_REGS 4 + static const u8 freq_plan[14][FREQ_PLAN_REGS] = { + { 0x99, 0x99, 0x09, 0x50 }, + { 0x46, 0x44, 0x0a, 0x50 }, + { 0xec, 0xee, 0x0a, 0x50 }, + { 0x99, 0x99, 0x0b, 0x50 }, + { 0x46, 0x44, 0x08, 0x51 }, + { 0xec, 0xee, 0x08, 0x51 }, + { 0x99, 0x99, 0x09, 0x51 }, + { 0x46, 0x44, 0x0a, 0x51 }, + { 0xec, 0xee, 0x0a, 0x51 }, + { 0x99, 0x99, 0x0b, 0x51 }, + { 0x46, 0x44, 0x08, 0x52 }, + { 0xec, 0xee, 0x08, 0x52 }, + { 0x99, 0x99, 0x09, 0x52 }, + { 0x33, 0x33, 0x0b, 0x52 }, + }; + struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = { + { 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 }, + }; + struct mt76_reg_pair bbp_settings[3] = { + { 62, 0x37 - dev->ee->lna_gain }, + { 63, 0x37 - dev->ee->lna_gain }, + { 64, 0x37 - dev->ee->lna_gain }, + }; + + struct ieee80211_channel *chan = chandef->chan; + enum nl80211_channel_type chan_type = + cfg80211_get_chandef_type(chandef); + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + int chan_idx; + bool chan_ext_below; + u8 bw; + int i, ret; + + bw = MT_BW_20; + chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS); + chan_idx = chan->hw_value - 1; + + if (chandef->width == NL80211_CHAN_WIDTH_40) { + bw = MT_BW_40; + + if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS) + chan_idx -= 2; + else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS) + chan_idx += 2; + else + dev_err(dev->dev, "Error: invalid 40MHz channel!!\n"); + } + + if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) { + dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n", + bw, chan_ext_below); + + mt7601u_bbp_set_bw(dev, bw); + + mt7601u_bbp_set_ctrlch(dev, chan_ext_below); + mt7601u_mac_set_ctrlch(dev, chan_ext_below); + dev->chan_ext_below = chan_ext_below; + } + + for (i = 0; i < FREQ_PLAN_REGS; i++) + channel_freq_plan[i].value = freq_plan[chan_idx][i]; + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, + channel_freq_plan, FREQ_PLAN_REGS); + if (ret) + return ret; + + mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f, + dev->ee->chan_pwr[chan_idx] & 0x3f); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + bbp_settings, ARRAY_SIZE(bbp_settings)); + if (ret) + return ret; + + mt7601u_vco_cal(dev); + mt7601u_bbp_set_bw(dev, bw); + ret = mt7601u_set_bw_filter(dev, false); + if (ret) + return ret; + + mt7601u_apply_ch14_fixup(dev, chan->hw_value); + mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 | + int_to_s6(t->ofdm[0].bw20) << 16 | + int_to_s6(t->cck[1].bw20) << 8 | + int_to_s6(t->cck[0].bw20)); + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + mt7601u_agc_reset(dev); + + dev->chandef = *chandef; + + return 0; +} + +int mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef) +{ + int ret; + + cancel_delayed_work_sync(&dev->cal_work); + cancel_delayed_work_sync(&dev->freq_cal.work); + + mutex_lock(&dev->hw_atomic_mutex); + ret = __mt7601u_phy_set_channel(dev, chandef); + mutex_unlock(&dev->hw_atomic_mutex); + if (ret) + return ret; + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + return 0; + + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); + if (dev->freq_cal.enabled) + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, + MT_FREQ_CAL_INIT_DELAY); + return 0; +} + +#define BBP_R47_FLAG GENMASK(2, 0) +#define BBP_R47_F_TSSI 0 +#define BBP_R47_F_PKT_T 1 +#define BBP_R47_F_TX_RATE 2 +#define BBP_R47_F_TEMP 4 +/** + * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair + * @dev: pointer to adapter structure + * @reg: value of BBP R47 before the operation + * @flag: one of the BBP_R47_F_* flags + * + * Convenience helper for reading values through BBP R47/R49 pair. + * Takes old value of BBP R47 as @reg, because callers usually have it + * cached already. + * + * Return: value of BBP R49. + */ +static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag) +{ + flag |= reg & ~BBP_R47_FLAG; + mt7601u_bbp_wr(dev, 47, flag); + usleep_range(500, 700); + return mt7601u_bbp_rr(dev, 49); +} + +static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev) +{ + u8 bbp_val, temp; + u32 rf_bp, rf_set; + int i; + + rf_set = mt7601u_rr(dev, MT_RF_SETTING_0); + rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010); + mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010); + + bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10); + + mt7601u_bbp_wr(dev, 22, 0x40); + + for (i = 100; i && (bbp_val & 0x10); i--) + bbp_val = mt7601u_bbp_rr(dev, 47); + + temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP); + + mt7601u_bbp_wr(dev, 22, 0); + + bbp_val = mt7601u_bbp_rr(dev, 21); + bbp_val |= 0x02; + mt7601u_bbp_wr(dev, 21, bbp_val); + bbp_val &= ~0x02; + mt7601u_bbp_wr(dev, 21, bbp_val); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, rf_set); + mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp); + + trace_read_temp(dev, temp); + return temp; +} + +static s8 mt7601u_read_temp(struct mt7601u_dev *dev) +{ + int i; + u8 val; + s8 temp; + + val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10); + + /* Note: this rarely succeeds, temp can change even if it fails. */ + for (i = 100; i && (val & 0x10); i--) + val = mt7601u_bbp_rr(dev, 47); + + temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP); + + trace_read_temp(dev, temp); + return temp; +} + +static void mt7601u_rxdc_cal(struct mt7601u_dev *dev) +{ + static const struct mt76_reg_pair intro[] = { + { 158, 0x8d }, { 159, 0xfc }, + { 158, 0x8c }, { 159, 0x4c }, + }, outro[] = { + { 158, 0x8d }, { 159, 0xe0 }, + }; + u32 mac_ctrl; + int i, ret; + + mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + intro, ARRAY_SIZE(intro)); + if (ret) + dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret); + + for (i = 20; i; i--) { + usleep_range(300, 500); + + mt7601u_bbp_wr(dev, 158, 0x8c); + if (mt7601u_bbp_rr(dev, 159) == 0x0c) + break; + } + if (!i) + dev_err(dev->dev, "%s timed out\n", __func__); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + outro, ARRAY_SIZE(outro)); + if (ret) + dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); +} + +void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev) +{ + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return; + + mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp); + + mt7601u_rxdc_cal(dev); +} + +/* Note: function copied from vendor driver */ +static s16 lin2dBd(u16 linear) +{ + short exp = 0; + unsigned int mantisa; + int app, dBd; + + if (WARN_ON(!linear)) + return -10000; + + mantisa = linear; + + exp = fls(mantisa) - 16; + if (exp > 0) + mantisa >>= exp; + else + mantisa <<= abs(exp); + + if (mantisa <= 0xb800) + app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600); + else + app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00); + if (app < 0) + app = 0; + + dBd = ((15 + exp) << 15) + app; + dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7); + dBd = (dBd >> 10); + + return dBd; +} + +static void +mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db) +{ + struct tssi_data *d = &dev->ee->tssi_data; + int init_offset; + + init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10; + + mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, + int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP); +} + +static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev) +{ + u8 rf_vga, rf_mixer, bbp_r47; + int i, j; + s8 res[4]; + s16 tssi_init_db, tssi_init_hvga_db; + + mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030); + mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); + + mt7601u_bbp_wr(dev, 58, 0); + mt7601u_bbp_wr(dev, 241, 0x2); + mt7601u_bbp_wr(dev, 23, 0x8); + bbp_r47 = mt7601u_bbp_rr(dev, 47); + + /* Set VGA gain */ + rf_vga = mt7601u_rf_rr(dev, 5, 3); + mt7601u_rf_wr(dev, 5, 3, 8); + + /* Mixer disable */ + rf_mixer = mt7601u_rf_rr(dev, 4, 39); + mt7601u_rf_wr(dev, 4, 39, 0); + + for (i = 0; i < 4; i++) { + mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0); + + mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02); + mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11); + + /* BBP TSSI initial and soft reset */ + mt7601u_bbp_wr(dev, 22, 0); + mt7601u_bbp_wr(dev, 244, 0); + + mt7601u_bbp_wr(dev, 21, 1); + udelay(1); + mt7601u_bbp_wr(dev, 21, 0); + + /* TSSI measurement */ + mt7601u_bbp_wr(dev, 47, 0x50); + mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40); + + for (j = 20; j; j--) + if (!(mt7601u_bbp_rr(dev, 47) & 0x10)) + break; + if (!j) + dev_err(dev->dev, "%s timed out\n", __func__); + + /* TSSI read */ + mt7601u_bbp_wr(dev, 47, 0x40); + res[i] = mt7601u_bbp_rr(dev, 49); + } + + tssi_init_db = lin2dBd((short)res[1] - res[0]); + tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4); + dev->tssi_init = res[0]; + dev->tssi_init_hvga = res[2]; + dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db; + + dev_dbg(dev->dev, + "TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n", + dev->tssi_init, tssi_init_db, dev->tssi_init_hvga, + tssi_init_hvga_db, dev->tssi_init_hvga_offset_db); + + mt7601u_bbp_wr(dev, 22, 0); + mt7601u_bbp_wr(dev, 244, 0); + + mt7601u_bbp_wr(dev, 21, 1); + udelay(1); + mt7601u_bbp_wr(dev, 21, 0); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, 0); + + mt7601u_rf_wr(dev, 5, 3, rf_vga); + mt7601u_rf_wr(dev, 4, 39, rf_mixer); + mt7601u_bbp_wr(dev, 47, bbp_r47); + + mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db); +} + +static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on) +{ + int ret, temp, hi_temp = 400, lo_temp = -200; + + temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE; + dev->curr_temp = temp; + + /* DPD Calibration */ + if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) { + dev->dpd_temp = temp; + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); + if (ret) + return ret; + + mt7601u_vco_cal(dev); + + dev_dbg(dev->dev, "Recalibrate DPD\n"); + } + + /* PLL Lock Protect */ + if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */ + dev->pll_lock_protect = true; + + mt7601u_rf_wr(dev, 4, 4, 6); + mt7601u_rf_clear(dev, 4, 10, 0x30); + + dev_dbg(dev->dev, "PLL lock protect on - too cold\n"); + } else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */ + dev->pll_lock_protect = false; + + mt7601u_rf_wr(dev, 4, 4, 0); + mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10); + + dev_dbg(dev->dev, "PLL lock protect off\n"); + } + + if (on) { + hi_temp -= 50; + lo_temp -= 50; + } + + /* BBP CR for H, L, N temperature */ + if (temp > hi_temp) + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high"); + else if (temp > lo_temp) + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal"); + else + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low"); +} + +/* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */ +static int mt7601u_current_tx_power(struct mt7601u_dev *dev) +{ + return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1]; +} + +static bool mt7601u_use_hvga(struct mt7601u_dev *dev) +{ + return !(mt7601u_current_tx_power(dev) > 20); +} + +static s16 +mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate) +{ + static const s16 decode_tb[] = { 0, 8847, -5734, -5734 }; + u32 reg; + + switch (phy_mode) { + case MT_PHY_TYPE_OFDM: + tx_rate += 4; + fallthrough; + case MT_PHY_TYPE_CCK: + reg = dev->rf_pa_mode[0]; + break; + default: + reg = dev->rf_pa_mode[1]; + break; + } + + return decode_tb[(reg >> (tx_rate * 2)) & 0x3]; +} + +static struct mt7601u_tssi_params +mt7601u_tssi_params_get(struct mt7601u_dev *dev) +{ + static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 }; + static const int static_power[4] = { 0, -49152, -98304, 49152 }; + struct mt7601u_tssi_params p; + u8 bbp_r47, pkt_type, tx_rate; + struct power_per_rate *rate_table; + + bbp_r47 = mt7601u_bbp_rr(dev, 47); + + p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI); + dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP); + pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T); + + p.trgt_power = mt7601u_current_tx_power(dev); + + switch (pkt_type & 0x03) { + case MT_PHY_TYPE_CCK: + tx_rate = (pkt_type >> 4) & 0x03; + rate_table = dev->ee->power_rate_table.cck; + break; + + case MT_PHY_TYPE_OFDM: + tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07]; + rate_table = dev->ee->power_rate_table.ofdm; + break; + + default: + tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE); + tx_rate &= 0x7f; + rate_table = dev->ee->power_rate_table.ht; + break; + } + + if (dev->bw == MT_BW_20) + p.trgt_power += rate_table[tx_rate / 2].bw20; + else + p.trgt_power += rate_table[tx_rate / 2].bw40; + + p.trgt_power <<= 12; + + dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power); + + p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03, + tx_rate); + + /* Channel 14, cck, bw20 */ + if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) { + if (mt7601u_bbp_rr(dev, 4) & 0x20) + p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830; + else + p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576; + } + + p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03]; + + p.trgt_power += dev->ee->tssi_data.tx0_delta_offset; + + dev_dbg(dev->dev, + "tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n", + p.tssi0, p.trgt_power, dev->raw_temp, pkt_type); + + return p; +} + +static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev) +{ + return !(mt7601u_bbp_rr(dev, 47) & 0x10); +} + +static int mt7601u_tssi_cal(struct mt7601u_dev *dev) +{ + struct mt7601u_tssi_params params; + int curr_pwr, diff_pwr; + char tssi_offset; + s8 tssi_init; + s16 tssi_m_dc, tssi_db; + bool hvga; + u32 val; + + if (!dev->ee->tssi_enabled) + return 0; + + hvga = mt7601u_use_hvga(dev); + if (!dev->tssi_read_trig) + return mt7601u_mcu_tssi_read_kick(dev, hvga); + + if (!mt7601u_tssi_read_ready(dev)) + return 0; + + params = mt7601u_tssi_params_get(dev); + + tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init); + tssi_m_dc = params.tssi0 - tssi_init; + tssi_db = lin2dBd(tssi_m_dc); + dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n", + tssi_m_dc, tssi_db, hvga); + + if (dev->chandef.chan->hw_value < 5) + tssi_offset = dev->ee->tssi_data.offset[0]; + else if (dev->chandef.chan->hw_value < 9) + tssi_offset = dev->ee->tssi_data.offset[1]; + else + tssi_offset = dev->ee->tssi_data.offset[2]; + + if (hvga) + tssi_db -= dev->tssi_init_hvga_offset_db; + + curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9); + diff_pwr = params.trgt_power - curr_pwr; + dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr); + + if (params.tssi0 > 126 && diff_pwr > 0) { + dev_err(dev->dev, "Error: TSSI upper saturation\n"); + diff_pwr = 0; + } + if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) { + dev_err(dev->dev, "Error: TSSI lower saturation\n"); + diff_pwr = 0; + } + + if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 && + (abs(diff_pwr) > abs(dev->prev_pwr_diff) || + (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff))) + diff_pwr = 0; + else + dev->prev_pwr_diff = diff_pwr; + + diff_pwr += (diff_pwr > 0) ? 2048 : -2048; + diff_pwr /= 4096; + + dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr); + + val = mt7601u_rr(dev, MT_TX_ALC_CFG_1); + curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val)); + diff_pwr += curr_pwr; + val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr); + mt7601u_wr(dev, MT_TX_ALC_CFG_1, val); + + return mt7601u_mcu_tssi_read_kick(dev, hvga); +} + +static u8 mt7601u_agc_default(struct mt7601u_dev *dev) +{ + return (dev->ee->lna_gain - 8) * 2 + 0x34; +} + +static void mt7601u_agc_reset(struct mt7601u_dev *dev) +{ + u8 agc = mt7601u_agc_default(dev); + + mt7601u_bbp_wr(dev, 66, agc); +} + +void mt7601u_agc_save(struct mt7601u_dev *dev) +{ + dev->agc_save = mt7601u_bbp_rr(dev, 66); +} + +void mt7601u_agc_restore(struct mt7601u_dev *dev) +{ + mt7601u_bbp_wr(dev, 66, dev->agc_save); +} + +static void mt7601u_agc_tune(struct mt7601u_dev *dev) +{ + u8 val = mt7601u_agc_default(dev); + long avg_rssi; + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + return; + + /* Note: only in STA mode and not dozing; perhaps do this only if + * there is enough rssi updates since last run? + * Rssi updates are only on beacons and U2M so should work... + */ + spin_lock_bh(&dev->con_mon_lock); + avg_rssi = ewma_rssi_read(&dev->avg_rssi); + spin_unlock_bh(&dev->con_mon_lock); + if (avg_rssi == 0) + return; + + avg_rssi = -avg_rssi; + if (avg_rssi <= -70) + val -= 0x20; + else if (avg_rssi <= -60) + val -= 0x10; + + if (val != mt7601u_bbp_rr(dev, 66)) + mt7601u_bbp_wr(dev, 66, val); + + /* TODO: also if lost a lot of beacons try resetting + * (see RTMPSetAGCInitValue() call in mlme.c). + */ +} + +static void mt7601u_phy_calibrate(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + cal_work.work); + + mt7601u_agc_tune(dev); + mt7601u_tssi_cal(dev); + /* If TSSI calibration was run it already updated temperature. */ + if (!dev->ee->tssi_enabled) + dev->raw_temp = mt7601u_read_temp(dev); + mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */ + + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); +} + +static unsigned long +__mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode) +{ + u8 activate_threshold, deactivate_threshold; + + trace_freq_cal_offset(dev, phy_mode, last_offset); + + /* No beacons received - reschedule soon */ + if (last_offset == MT_FREQ_OFFSET_INVALID) + return MT_FREQ_CAL_ADJ_INTERVAL; + + switch (phy_mode) { + case MT_PHY_TYPE_CCK: + activate_threshold = 19; + deactivate_threshold = 5; + break; + case MT_PHY_TYPE_OFDM: + activate_threshold = 102; + deactivate_threshold = 32; + break; + case MT_PHY_TYPE_HT: + case MT_PHY_TYPE_HT_GF: + activate_threshold = 82; + deactivate_threshold = 20; + break; + default: + WARN_ON(1); + return MT_FREQ_CAL_CHECK_INTERVAL; + } + + if (abs(last_offset) >= activate_threshold) + dev->freq_cal.adjusting = true; + else if (abs(last_offset) <= deactivate_threshold) + dev->freq_cal.adjusting = false; + + if (!dev->freq_cal.adjusting) + return MT_FREQ_CAL_CHECK_INTERVAL; + + if (last_offset > deactivate_threshold) { + if (dev->freq_cal.freq > 0) + dev->freq_cal.freq--; + else + dev->freq_cal.adjusting = false; + } else if (last_offset < -deactivate_threshold) { + if (dev->freq_cal.freq < 0xbf) + dev->freq_cal.freq++; + else + dev->freq_cal.adjusting = false; + } + + trace_freq_cal_adjust(dev, dev->freq_cal.freq); + mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq); + mt7601u_vco_cal(dev); + + return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL : + MT_FREQ_CAL_CHECK_INTERVAL; +} + +static void mt7601u_phy_freq_cal(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + freq_cal.work.work); + s8 last_offset; + u8 phy_mode; + unsigned long delay; + + spin_lock_bh(&dev->con_mon_lock); + last_offset = dev->bcn_freq_off; + phy_mode = dev->bcn_phy_mode; + spin_unlock_bh(&dev->con_mon_lock); + + delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode); + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay); + + spin_lock_bh(&dev->con_mon_lock); + dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; + spin_unlock_bh(&dev->con_mon_lock); +} + +void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, + struct ieee80211_bss_conf *info) +{ + struct ieee80211_vif *vif = container_of(info, struct ieee80211_vif, + bss_conf); + + if (!vif->cfg.assoc) + cancel_delayed_work_sync(&dev->freq_cal.work); + + /* Start/stop collecting beacon data */ + spin_lock_bh(&dev->con_mon_lock); + ether_addr_copy(dev->ap_bssid, info->bssid); + ewma_rssi_init(&dev->avg_rssi); + dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; + spin_unlock_bh(&dev->con_mon_lock); + + dev->freq_cal.freq = dev->ee->rf_freq_off; + dev->freq_cal.enabled = vif->cfg.assoc; + dev->freq_cal.adjusting = false; + + if (vif->cfg.assoc) + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, + MT_FREQ_CAL_INIT_DELAY); +} + +static int mt7601u_init_cal(struct mt7601u_dev *dev) +{ + u32 mac_ctrl; + int ret; + + dev->raw_temp = mt7601u_read_bootup_temp(dev); + dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) * + MT_EE_TEMPERATURE_SLOPE; + dev->dpd_temp = dev->curr_temp; + + mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0); + if (ret) + return ret; + + ret = mt7601u_rf_rr(dev, 0, 4); + if (ret < 0) + return ret; + ret |= 0x80; + ret = mt7601u_rf_wr(dev, 0, 4, ret); + if (ret) + return ret; + msleep(2); + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0); + if (ret) + return ret; + + mt7601u_rxdc_cal(dev); + + ret = mt7601u_set_bw_filter(dev, true); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); + if (ret) + return ret; + + mt7601u_rxdc_cal(dev); + + mt7601u_tssi_dc_gain_cal(dev); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); + + mt7601u_temp_comp(dev, true); + + return 0; +} + +int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw) +{ + u32 val, old; + + if (bw == dev->bw) { + /* Vendor driver does the rmc even when no change is needed. */ + mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); + + return 0; + } + dev->bw = bw; + + /* Stop MAC for the time of bw change */ + old = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, val); + mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, + 0, 500000); + + mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, old); + + return mt7601u_load_bbp_temp_table_bw(dev); +} + +/** + * mt7601u_set_rx_path - set rx path in BBP + * @dev: pointer to adapter structure + * @path: rx path to set values are 0-based + */ +void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path) +{ + mt7601u_bbp_rmw(dev, 3, 0x18, path << 3); +} + +/** + * mt7601u_set_tx_dac - set which tx DAC to use + * @dev: pointer to adapter structure + * @dac: DAC index, values are 0-based + */ +void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac) +{ + mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3); +} + +int mt7601u_phy_init(struct mt7601u_dev *dev) +{ + int ret; + + dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0); + dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1); + + ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_central, + ARRAY_SIZE(rf_central)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_channel, + ARRAY_SIZE(rf_channel)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga)); + if (ret) + return ret; + + ret = mt7601u_init_cal(dev); + if (ret) + return ret; + + dev->prev_pwr_diff = 100; + + INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate); + INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal); + + return 0; +} -- cgit v1.2.3