From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ralink/rt2x00/rt2x00reg.h | 266 +++++++++++++++++++++++++ 1 file changed, 266 insertions(+) create mode 100644 drivers/net/wireless/ralink/rt2x00/rt2x00reg.h (limited to 'drivers/net/wireless/ralink/rt2x00/rt2x00reg.h') diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00reg.h b/drivers/net/wireless/ralink/rt2x00/rt2x00reg.h new file mode 100644 index 000000000..ffe802b42 --- /dev/null +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00reg.h @@ -0,0 +1,266 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + Copyright (C) 2004 - 2009 Ivo van Doorn + + + */ + +/* + Module: rt2x00 + Abstract: rt2x00 generic register information. + */ + +#ifndef RT2X00REG_H +#define RT2X00REG_H + +/* + * RX crypto status + */ +enum rx_crypto { + RX_CRYPTO_SUCCESS = 0, + RX_CRYPTO_FAIL_ICV = 1, + RX_CRYPTO_FAIL_MIC = 2, + RX_CRYPTO_FAIL_KEY = 3, +}; + +/* + * Antenna values + */ +enum antenna { + ANTENNA_SW_DIVERSITY = 0, + ANTENNA_A = 1, + ANTENNA_B = 2, + ANTENNA_HW_DIVERSITY = 3, +}; + +/* + * Led mode values. + */ +enum led_mode { + LED_MODE_DEFAULT = 0, + LED_MODE_TXRX_ACTIVITY = 1, + LED_MODE_SIGNAL_STRENGTH = 2, + LED_MODE_ASUS = 3, + LED_MODE_ALPHA = 4, +}; + +/* + * TSF sync values + */ +enum tsf_sync { + TSF_SYNC_NONE = 0, + TSF_SYNC_INFRA = 1, + TSF_SYNC_ADHOC = 2, + TSF_SYNC_AP_NONE = 3, +}; + +/* + * Device states + */ +enum dev_state { + STATE_DEEP_SLEEP = 0, + STATE_SLEEP = 1, + STATE_STANDBY = 2, + STATE_AWAKE = 3, + +/* + * Additional device states, these values are + * not strict since they are not directly passed + * into the device. + */ + STATE_RADIO_ON, + STATE_RADIO_OFF, + STATE_RADIO_IRQ_ON, + STATE_RADIO_IRQ_OFF, +}; + +/* + * IFS backoff values + */ +enum ifs { + IFS_BACKOFF = 0, + IFS_SIFS = 1, + IFS_NEW_BACKOFF = 2, + IFS_NONE = 3, +}; + +/* + * IFS backoff values for HT devices + */ +enum txop { + TXOP_HTTXOP = 0, + TXOP_PIFS = 1, + TXOP_SIFS = 2, + TXOP_BACKOFF = 3, +}; + +/* + * Cipher types for hardware encryption + */ +enum cipher { + CIPHER_NONE = 0, + CIPHER_WEP64 = 1, + CIPHER_WEP128 = 2, + CIPHER_TKIP = 3, + CIPHER_AES = 4, +/* + * The following fields were added by rt61pci and rt73usb. + */ + CIPHER_CKIP64 = 5, + CIPHER_CKIP128 = 6, + CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */ + +/* + * Max cipher type. + * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128 + * are excluded due to limitations in mac80211. + */ + CIPHER_MAX = 4, +}; + +/* + * Rate modulations + */ +enum rate_modulation { + RATE_MODE_CCK = 0, + RATE_MODE_OFDM = 1, + RATE_MODE_HT_MIX = 2, + RATE_MODE_HT_GREENFIELD = 3, +}; + +/* + * Firmware validation error codes + */ +enum firmware_errors { + FW_OK, + FW_BAD_CRC, + FW_BAD_LENGTH, + FW_BAD_VERSION, +}; + +/* + * Register handlers. + * We store the position of a register field inside a field structure, + * This will simplify the process of setting and reading a certain field + * inside the register while making sure the process remains byte order safe. + */ +struct rt2x00_field8 { + u8 bit_offset; + u8 bit_mask; +}; + +struct rt2x00_field16 { + u16 bit_offset; + u16 bit_mask; +}; + +struct rt2x00_field32 { + u32 bit_offset; + u32 bit_mask; +}; + +/* + * Power of two check, this will check + * if the mask that has been given contains and contiguous set of bits. + * Note that we cannot use the is_power_of_2() function since this + * check must be done at compile-time. + */ +#define is_power_of_two(x) ( !((x) & ((x)-1)) ) +#define low_bit_mask(x) ( ((x)-1) & ~(x) ) +#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x)) + +/* + * Macros to find first set bit in a variable. + * These macros behave the same as the __ffs() functions but + * the most important difference that this is done during + * compile-time rather then run-time. + */ +#define compile_ffs2(__x) \ + __builtin_choose_expr(((__x) & 0x1), 0, 1) + +#define compile_ffs4(__x) \ + __builtin_choose_expr(((__x) & 0x3), \ + (compile_ffs2((__x))), \ + (compile_ffs2((__x) >> 2) + 2)) + +#define compile_ffs8(__x) \ + __builtin_choose_expr(((__x) & 0xf), \ + (compile_ffs4((__x))), \ + (compile_ffs4((__x) >> 4) + 4)) + +#define compile_ffs16(__x) \ + __builtin_choose_expr(((__x) & 0xff), \ + (compile_ffs8((__x))), \ + (compile_ffs8((__x) >> 8) + 8)) + +#define compile_ffs32(__x) \ + __builtin_choose_expr(((__x) & 0xffff), \ + (compile_ffs16((__x))), \ + (compile_ffs16((__x) >> 16) + 16)) + +/* + * This macro will check the requirements for the FIELD{8,16,32} macros + * The mask should be a constant non-zero contiguous set of bits which + * does not exceed the given typelimit. + */ +#define FIELD_CHECK(__mask, __type) \ + BUILD_BUG_ON(!(__mask) || \ + !is_valid_mask(__mask) || \ + (__mask) != (__type)(__mask)) \ + +#define FIELD8(__mask) \ +({ \ + FIELD_CHECK(__mask, u8); \ + (struct rt2x00_field8) { \ + compile_ffs8(__mask), (__mask) \ + }; \ +}) + +#define FIELD16(__mask) \ +({ \ + FIELD_CHECK(__mask, u16); \ + (struct rt2x00_field16) { \ + compile_ffs16(__mask), (__mask) \ + }; \ +}) + +#define FIELD32(__mask) \ +({ \ + FIELD_CHECK(__mask, u32); \ + (struct rt2x00_field32) { \ + compile_ffs32(__mask), (__mask) \ + }; \ +}) + +#define SET_FIELD(__reg, __type, __field, __value)\ +({ \ + typecheck(__type, __field); \ + *(__reg) &= ~((__field).bit_mask); \ + *(__reg) |= ((__value) << \ + ((__field).bit_offset)) & \ + ((__field).bit_mask); \ +}) + +#define GET_FIELD(__reg, __type, __field) \ +({ \ + typecheck(__type, __field); \ + ((__reg) & ((__field).bit_mask)) >> \ + ((__field).bit_offset); \ +}) + +#define rt2x00_set_field32(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field32, __field, __value) +#define rt2x00_get_field32(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field32, __field) + +#define rt2x00_set_field16(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field16, __field, __value) +#define rt2x00_get_field16(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field16, __field) + +#define rt2x00_set_field8(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field8, __field, __value) +#define rt2x00_get_field8(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field8, __field) + +#endif /* RT2X00REG_H */ -- cgit v1.2.3