From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/realtek/rtl818x/rtl818x.h | 402 +++++++++++++++++++++++++ 1 file changed, 402 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtl818x/rtl818x.h (limited to 'drivers/net/wireless/realtek/rtl818x/rtl818x.h') diff --git a/drivers/net/wireless/realtek/rtl818x/rtl818x.h b/drivers/net/wireless/realtek/rtl818x/rtl818x.h new file mode 100644 index 000000000..597f41af8 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl818x.h @@ -0,0 +1,402 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Definitions for RTL818x hardware + * + * Copyright 2007 Michael Wu + * Copyright 2007 Andrea Merello + * + * Based on the r8187 driver, which is: + * Copyright 2005 Andrea Merello , et al. + */ + +#ifndef RTL818X_H +#define RTL818X_H + +struct rtl818x_csr { + + u8 MAC[6]; + u8 reserved_0[2]; + + union { + __le32 MAR[2]; /* 0x8 */ + + struct{ /* rtl8187se */ + u8 rf_sw_config; /* 0x8 */ + u8 reserved_01[3]; + __le32 TMGDA; /* 0xc */ + } __packed; + } __packed; + + union { /* 0x10 */ + struct { + u8 RX_FIFO_COUNT; + u8 reserved_1; + u8 TX_FIFO_COUNT; + u8 BQREQ; + } __packed; + + __le32 TBKDA; /* for 8187se */ + } __packed; + + __le32 TBEDA; /* 0x14 - for rtl8187se */ + + __le32 TSFT[2]; + + union { /* 0x20 */ + __le32 TLPDA; + __le32 TVIDA; /* for 8187se */ + } __packed; + + union { /* 0x24 */ + __le32 TNPDA; + __le32 TVODA; /* for 8187se */ + } __packed; + + /* hi pri ring for all cards */ + __le32 THPDA; /* 0x28 */ + + union { /* 0x2c */ + struct { + u8 reserved_2a; + u8 EIFS_8187SE; + } __packed; + + __le16 BRSR; + } __packed; + + u8 BSSID[6]; /* 0x2e */ + + union { /* 0x34 */ + struct { + u8 RESP_RATE; + u8 EIFS; + } __packed; + __le16 BRSR_8187SE; + } __packed; + + u8 reserved_3[1]; /* 0x36 */ + u8 CMD; /* 0x37 */ +#define RTL818X_CMD_TX_ENABLE (1 << 2) +#define RTL818X_CMD_RX_ENABLE (1 << 3) +#define RTL818X_CMD_RESET (1 << 4) + u8 reserved_4[4]; /* 0x38 */ + union { + struct { + __le16 INT_MASK; + __le16 INT_STATUS; + } __packed; + + __le32 INT_STATUS_SE; /* 0x3c */ + } __packed; +/* status bits for rtl8187 and rtl8180/8185 */ +#define RTL818X_INT_RX_OK (1 << 0) +#define RTL818X_INT_RX_ERR (1 << 1) +#define RTL818X_INT_TXL_OK (1 << 2) +#define RTL818X_INT_TXL_ERR (1 << 3) +#define RTL818X_INT_RX_DU (1 << 4) +#define RTL818X_INT_RX_FO (1 << 5) +#define RTL818X_INT_TXN_OK (1 << 6) +#define RTL818X_INT_TXN_ERR (1 << 7) +#define RTL818X_INT_TXH_OK (1 << 8) +#define RTL818X_INT_TXH_ERR (1 << 9) +#define RTL818X_INT_TXB_OK (1 << 10) +#define RTL818X_INT_TXB_ERR (1 << 11) +#define RTL818X_INT_ATIM (1 << 12) +#define RTL818X_INT_BEACON (1 << 13) +#define RTL818X_INT_TIME_OUT (1 << 14) +#define RTL818X_INT_TX_FO (1 << 15) +/* status bits for rtl8187se */ +#define RTL818X_INT_SE_TIMER3 (1 << 0) +#define RTL818X_INT_SE_TIMER2 (1 << 1) +#define RTL818X_INT_SE_RQ0SOR (1 << 2) +#define RTL818X_INT_SE_TXBED_OK (1 << 3) +#define RTL818X_INT_SE_TXBED_ERR (1 << 4) +#define RTL818X_INT_SE_TXBE_OK (1 << 5) +#define RTL818X_INT_SE_TXBE_ERR (1 << 6) +#define RTL818X_INT_SE_RX_OK (1 << 7) +#define RTL818X_INT_SE_RX_ERR (1 << 8) +#define RTL818X_INT_SE_TXL_OK (1 << 9) +#define RTL818X_INT_SE_TXL_ERR (1 << 10) +#define RTL818X_INT_SE_RX_DU (1 << 11) +#define RTL818X_INT_SE_RX_FIFO (1 << 12) +#define RTL818X_INT_SE_TXN_OK (1 << 13) +#define RTL818X_INT_SE_TXN_ERR (1 << 14) +#define RTL818X_INT_SE_TXH_OK (1 << 15) +#define RTL818X_INT_SE_TXH_ERR (1 << 16) +#define RTL818X_INT_SE_TXB_OK (1 << 17) +#define RTL818X_INT_SE_TXB_ERR (1 << 18) +#define RTL818X_INT_SE_ATIM_TO (1 << 19) +#define RTL818X_INT_SE_BK_TO (1 << 20) +#define RTL818X_INT_SE_TIMER1 (1 << 21) +#define RTL818X_INT_SE_TX_FIFO (1 << 22) +#define RTL818X_INT_SE_WAKEUP (1 << 23) +#define RTL818X_INT_SE_BK_DMA (1 << 24) +#define RTL818X_INT_SE_TMGD_OK (1 << 30) + __le32 TX_CONF; /* 0x40 */ +#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17) +#define RTL818X_TX_CONF_LOOPBACK_CONT (3 << 17) +#define RTL818X_TX_CONF_NO_ICV (1 << 19) +#define RTL818X_TX_CONF_DISCW (1 << 20) +#define RTL818X_TX_CONF_SAT_HWPLCP (1 << 24) +#define RTL818X_TX_CONF_R8180_ABCD (2 << 25) +#define RTL818X_TX_CONF_R8180_F (3 << 25) +#define RTL818X_TX_CONF_R8185_ABC (4 << 25) +#define RTL818X_TX_CONF_R8185_D (5 << 25) +#define RTL818X_TX_CONF_R8187vD (5 << 25) +#define RTL818X_TX_CONF_R8187vD_B (6 << 25) +#define RTL818X_TX_CONF_RTL8187SE (6 << 25) +#define RTL818X_TX_CONF_HWVER_MASK (7 << 25) +#define RTL818X_TX_CONF_DISREQQSIZE (1 << 28) +#define RTL818X_TX_CONF_PROBE_DTS (1 << 29) +#define RTL818X_TX_CONF_HW_SEQNUM (1 << 30) +#define RTL818X_TX_CONF_CW_MIN (1 << 31) + __le32 RX_CONF; +#define RTL818X_RX_CONF_MONITOR (1 << 0) +#define RTL818X_RX_CONF_NICMAC (1 << 1) +#define RTL818X_RX_CONF_MULTICAST (1 << 2) +#define RTL818X_RX_CONF_BROADCAST (1 << 3) +#define RTL818X_RX_CONF_FCS (1 << 5) +#define RTL818X_RX_CONF_DATA (1 << 18) +#define RTL818X_RX_CONF_CTRL (1 << 19) +#define RTL818X_RX_CONF_MGMT (1 << 20) +#define RTL818X_RX_CONF_ADDR3 (1 << 21) +#define RTL818X_RX_CONF_PM (1 << 22) +#define RTL818X_RX_CONF_BSSID (1 << 23) +#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28) +#define RTL818X_RX_CONF_CSDM1 (1 << 29) +#define RTL818X_RX_CONF_CSDM2 (1 << 30) +#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31) + __le32 INT_TIMEOUT; + __le32 TBDA; + u8 EEPROM_CMD; +#define RTL818X_EEPROM_CMD_READ (1 << 0) +#define RTL818X_EEPROM_CMD_WRITE (1 << 1) +#define RTL818X_EEPROM_CMD_CK (1 << 2) +#define RTL818X_EEPROM_CMD_CS (1 << 3) +#define RTL818X_EEPROM_CMD_NORMAL (0 << 6) +#define RTL818X_EEPROM_CMD_LOAD (1 << 6) +#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6) +#define RTL818X_EEPROM_CMD_CONFIG (3 << 6) + u8 CONFIG0; + u8 CONFIG1; + u8 CONFIG2; +#define RTL818X_CONFIG2_ANTENNA_DIV (1 << 6) + __le32 ANAPARAM; + u8 MSR; +#define RTL818X_MSR_NO_LINK (0 << 2) +#define RTL818X_MSR_ADHOC (1 << 2) +#define RTL818X_MSR_INFRA (2 << 2) +#define RTL818X_MSR_MASTER (3 << 2) +#define RTL818X_MSR_ENEDCA (4 << 2) + u8 CONFIG3; +#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6) +#define RTL818X_CONFIG3_GNT_SELECT (1 << 7) + u8 CONFIG4; +#define RTL818X_CONFIG4_POWEROFF (1 << 6) +#define RTL818X_CONFIG4_VCOOFF (1 << 7) + u8 TESTR; + u8 reserved_9[2]; + u8 PGSELECT; + u8 SECURITY; + __le32 ANAPARAM2; + u8 reserved_10[8]; + __le32 IMR; /* 0x6c - Interrupt mask reg for 8187se */ +#define IMR_TMGDOK ((1 << 30)) +#define IMR_DOT11HINT ((1 << 25)) /* 802.11h Measurement Interrupt */ +#define IMR_BCNDMAINT ((1 << 24)) /* Beacon DMA Interrupt */ +#define IMR_WAKEINT ((1 << 23)) /* Wake Up Interrupt */ +#define IMR_TXFOVW ((1 << 22)) /* Tx FIFO Overflow */ +#define IMR_TIMEOUT1 ((1 << 21)) /* Time Out Interrupt 1 */ +#define IMR_BCNINT ((1 << 20)) /* Beacon Time out */ +#define IMR_ATIMINT ((1 << 19)) /* ATIM Time Out */ +#define IMR_TBDER ((1 << 18)) /* Tx Beacon Descriptor Error */ +#define IMR_TBDOK ((1 << 17)) /* Tx Beacon Descriptor OK */ +#define IMR_THPDER ((1 << 16)) /* Tx High Priority Descriptor Error */ +#define IMR_THPDOK ((1 << 15)) /* Tx High Priority Descriptor OK */ +#define IMR_TVODER ((1 << 14)) /* Tx AC_VO Descriptor Error Int */ +#define IMR_TVODOK ((1 << 13)) /* Tx AC_VO Descriptor OK Interrupt */ +#define IMR_FOVW ((1 << 12)) /* Rx FIFO Overflow Interrupt */ +#define IMR_RDU ((1 << 11)) /* Rx Descriptor Unavailable */ +#define IMR_TVIDER ((1 << 10)) /* Tx AC_VI Descriptor Error */ +#define IMR_TVIDOK ((1 << 9)) /* Tx AC_VI Descriptor OK Interrupt */ +#define IMR_RER ((1 << 8)) /* Rx Error Interrupt */ +#define IMR_ROK ((1 << 7)) /* Receive OK Interrupt */ +#define IMR_TBEDER ((1 << 6)) /* Tx AC_BE Descriptor Error */ +#define IMR_TBEDOK ((1 << 5)) /* Tx AC_BE Descriptor OK */ +#define IMR_TBKDER ((1 << 4)) /* Tx AC_BK Descriptor Error */ +#define IMR_TBKDOK ((1 << 3)) /* Tx AC_BK Descriptor OK */ +#define IMR_RQOSOK ((1 << 2)) /* Rx QoS OK Interrupt */ +#define IMR_TIMEOUT2 ((1 << 1)) /* Time Out Interrupt 2 */ +#define IMR_TIMEOUT3 ((1 << 0)) /* Time Out Interrupt 3 */ + __le16 BEACON_INTERVAL; /* 0x70 */ + __le16 ATIM_WND; /* 0x72 */ + __le16 BEACON_INTERVAL_TIME; /* 0x74 */ + __le16 ATIMTR_INTERVAL; /* 0x76 */ + u8 PHY_DELAY; /* 0x78 */ + u8 CARRIER_SENSE_COUNTER; /* 0x79 */ + u8 reserved_11[2]; /* 0x7a */ + u8 PHY[4]; /* 0x7c */ + __le16 RFPinsOutput; /* 0x80 */ + __le16 RFPinsEnable; /* 0x82 */ + __le16 RFPinsSelect; /* 0x84 */ + __le16 RFPinsInput; /* 0x86 */ + __le32 RF_PARA; /* 0x88 */ + __le32 RF_TIMING; /* 0x8c */ + u8 GP_ENABLE; /* 0x90 */ + u8 GPIO0; /* 0x91 */ + u8 GPIO1; /* 0x92 */ + u8 TPPOLL_STOP; /* 0x93 - rtl8187se only */ +#define RTL818x_TPPOLL_STOP_BQ (1 << 7) +#define RTL818x_TPPOLL_STOP_VI (1 << 4) +#define RTL818x_TPPOLL_STOP_VO (1 << 5) +#define RTL818x_TPPOLL_STOP_BE (1 << 3) +#define RTL818x_TPPOLL_STOP_BK (1 << 2) +#define RTL818x_TPPOLL_STOP_MG (1 << 1) +#define RTL818x_TPPOLL_STOP_HI (1 << 6) + + __le32 HSSI_PARA; /* 0x94 */ + u8 reserved_13[4]; /* 0x98 */ + u8 TX_AGC_CTL; /* 0x9c */ +#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN (1 << 0) +#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL (1 << 1) +#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2) + u8 TX_GAIN_CCK; + u8 TX_GAIN_OFDM; + u8 TX_ANTENNA; + u8 reserved_14[16]; + u8 WPA_CONF; + u8 reserved_15[3]; + u8 SIFS; + u8 DIFS; + u8 SLOT; + u8 reserved_16[5]; + u8 CW_CONF; +#define RTL818X_CW_CONF_PERPACKET_CW (1 << 0) +#define RTL818X_CW_CONF_PERPACKET_RETRY (1 << 1) + u8 CW_VAL; + u8 RATE_FALLBACK; +#define RTL818X_RATE_FALLBACK_ENABLE (1 << 7) + u8 ACM_CONTROL; + u8 reserved_17[24]; + u8 CONFIG5; + u8 TX_DMA_POLLING; + u8 PHY_PR; + u8 reserved_18; + __le16 CWR; + u8 RETRY_CTR; + u8 reserved_19[3]; + __le16 INT_MIG; +/* RTL818X_R8187B_*: magic numbers from ioregisters */ +#define RTL818X_R8187B_B 0 +#define RTL818X_R8187B_D 1 +#define RTL818X_R8187B_E 2 + __le32 RDSAR; + __le16 TID_AC_MAP; + u8 reserved_20[4]; + union { + __le16 ANAPARAM3; /* 0xee */ + u8 ANAPARAM3A; /* for rtl8187 */ + }; + +#define AC_PARAM_TXOP_LIMIT_SHIFT 16 +#define AC_PARAM_ECW_MAX_SHIFT 12 +#define AC_PARAM_ECW_MIN_SHIFT 8 +#define AC_PARAM_AIFS_SHIFT 0 + + __le32 AC_VO_PARAM; /* 0xf0 */ + + union { /* 0xf4 */ + __le32 AC_VI_PARAM; + __le16 FEMR; + } __packed; + + union{ /* 0xf8 */ + __le32 AC_BE_PARAM; /* rtl8187se */ + struct{ + u8 reserved_21[2]; + __le16 TALLY_CNT; /* 0xfa */ + } __packed; + } __packed; + + union { + u8 TALLY_SEL; /* 0xfc */ + __le32 AC_BK_PARAM; + + } __packed; + +} __packed; + +/* These are addresses with NON-standard usage. + * They have offsets very far from this struct. + * I don't like to introduce a ton of "reserved".. + * They are for RTL8187SE + */ +#define REG_ADDR1(addr) ((u8 __iomem *)priv->map + (addr)) +#define REG_ADDR2(addr) ((__le16 __iomem *)priv->map + ((addr) >> 1)) +#define REG_ADDR4(addr) ((__le32 __iomem *)priv->map + ((addr) >> 2)) + +#define FEMR_SE REG_ADDR2(0x1D4) +#define ARFR REG_ADDR2(0x1E0) +#define RFSW_CTRL REG_ADDR2(0x272) +#define SW_3W_DB0 REG_ADDR2(0x274) +#define SW_3W_DB0_4 REG_ADDR4(0x274) +#define SW_3W_DB1 REG_ADDR2(0x278) +#define SW_3W_DB1_4 REG_ADDR4(0x278) +#define SW_3W_CMD1 REG_ADDR1(0x27D) +#define PI_DATA_REG REG_ADDR2(0x360) +#define SI_DATA_REG REG_ADDR2(0x362) + +struct rtl818x_rf_ops { + char *name; + void (*init)(struct ieee80211_hw *); + void (*stop)(struct ieee80211_hw *); + void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *); + u8 (*calc_rssi)(u8 agc, u8 sq); +}; + +/** + * enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips + * + * @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption. + * @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed. + * @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble. + * @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow. + * @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection. + * @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection. + * @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame. + * @RTL818X_TX_DESC_FLAG_FS: First segment of the frame. + */ +enum rtl818x_tx_desc_flags { + RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15), + RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15), + RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16), + RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16), + RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17), + RTL818X_TX_DESC_FLAG_CTS = (1 << 18), + RTL818X_TX_DESC_FLAG_RTS = (1 << 23), + RTL818X_TX_DESC_FLAG_LS = (1 << 28), + RTL818X_TX_DESC_FLAG_FS = (1 << 29), + RTL818X_TX_DESC_FLAG_DMA = (1 << 30), + RTL818X_TX_DESC_FLAG_OWN = (1 << 31) +}; + +enum rtl818x_rx_desc_flags { + RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12), + RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13), + RTL818X_RX_DESC_FLAG_PM = (1 << 14), + RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15), + RTL818X_RX_DESC_FLAG_BCAST = (1 << 16), + RTL818X_RX_DESC_FLAG_PAM = (1 << 17), + RTL818X_RX_DESC_FLAG_MCAST = (1 << 18), + RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25), + RTL818X_RX_DESC_FLAG_FOF = (1 << 26), + RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27), + RTL818X_RX_DESC_FLAG_LS = (1 << 28), + RTL818X_RX_DESC_FLAG_FS = (1 << 29), + RTL818X_RX_DESC_FLAG_EOR = (1 << 30), + RTL818X_RX_DESC_FLAG_OWN = (1 << 31) +}; + +#endif /* RTL818X_H */ -- cgit v1.2.3