From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/wireless/realtek/rtlwifi/rtl8188ee/rf.c | 486 +++++++++++++++++++++ 1 file changed, 486 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c') diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c new file mode 100644 index 000000000..24dc7011b --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c @@ -0,0 +1,486 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2009-2013 Realtek Corporation.*/ + +#include "../wifi.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "rf.h" +#include "dm.h" + +static bool _rtl88e_phy_rf6052_config_parafile(struct ieee80211_hw *hw); + +void rtl88e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + switch (bandwidth) { + case HT_CHANNEL_WIDTH_20: + rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & + 0xfffff3ff) | BIT(10) | BIT(11)); + rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, + rtlphy->rfreg_chnlval[0]); + break; + case HT_CHANNEL_WIDTH_20_40: + rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] & + 0xfffff3ff) | BIT(10)); + rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK, + rtlphy->rfreg_chnlval[0]); + break; + default: + pr_err("unknown bandwidth: %#X\n", bandwidth); + break; + } +} + +void rtl88e_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw, + u8 *ppowerlevel) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u32 tx_agc[2] = {0, 0}, tmpval; + bool turbo_scanoff = false; + u8 idx1, idx2; + u8 *ptr; + u8 direction; + u32 pwrtrac_value; + + if (rtlefuse->eeprom_regulatory != 0) + turbo_scanoff = true; + + if (mac->act_scanning) { + tx_agc[RF90_PATH_A] = 0x3f3f3f3f; + tx_agc[RF90_PATH_B] = 0x3f3f3f3f; + + if (turbo_scanoff) { + for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { + tx_agc[idx1] = ppowerlevel[idx1] | + (ppowerlevel[idx1] << 8) | + (ppowerlevel[idx1] << 16) | + (ppowerlevel[idx1] << 24); + } + } + } else { + for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { + tx_agc[idx1] = ppowerlevel[idx1] | + (ppowerlevel[idx1] << 8) | + (ppowerlevel[idx1] << 16) | + (ppowerlevel[idx1] << 24); + } + + if (rtlefuse->eeprom_regulatory == 0) { + tmpval = + (rtlphy->mcs_txpwrlevel_origoffset[0][6]) + + (rtlphy->mcs_txpwrlevel_origoffset[0][7] << + 8); + tx_agc[RF90_PATH_A] += tmpval; + + tmpval = (rtlphy->mcs_txpwrlevel_origoffset[0][14]) + + (rtlphy->mcs_txpwrlevel_origoffset[0][15] << + 24); + tx_agc[RF90_PATH_B] += tmpval; + } + } + + for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) { + ptr = (u8 *)(&tx_agc[idx1]); + for (idx2 = 0; idx2 < 4; idx2++) { + if (*ptr > RF6052_MAX_TX_PWR) + *ptr = RF6052_MAX_TX_PWR; + ptr++; + } + } + rtl88e_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value); + if (direction == 1) { + tx_agc[0] += pwrtrac_value; + tx_agc[1] += pwrtrac_value; + } else if (direction == 2) { + tx_agc[0] -= pwrtrac_value; + tx_agc[1] -= pwrtrac_value; + } + tmpval = tx_agc[RF90_PATH_A] & 0xff; + rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, + RTXAGC_A_CCK1_MCS32); + + tmpval = tx_agc[RF90_PATH_A] >> 8; + + /*tmpval = tmpval & 0xff00ffff;*/ + + rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval, + RTXAGC_B_CCK11_A_CCK2_11); + + tmpval = tx_agc[RF90_PATH_B] >> 24; + rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval, + RTXAGC_B_CCK11_A_CCK2_11); + + tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff; + rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval, + RTXAGC_B_CCK1_55_MCS32); +} + +static void rtl88e_phy_get_power_base(struct ieee80211_hw *hw, + u8 *ppowerlevel_ofdm, + u8 *ppowerlevel_bw20, + u8 *ppowerlevel_bw40, u8 channel, + u32 *ofdmbase, u32 *mcsbase) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u32 powerbase0, powerbase1; + u8 i, powerlevel[2]; + + for (i = 0; i < 2; i++) { + powerbase0 = ppowerlevel_ofdm[i]; + + powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) | + (powerbase0 << 8) | powerbase0; + *(ofdmbase + i) = powerbase0; + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + " [OFDM power base index rf(%c) = 0x%x]\n", + ((i == 0) ? 'A' : 'B'), *(ofdmbase + i)); + } + + for (i = 0; i < 2; i++) { + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) + powerlevel[i] = ppowerlevel_bw20[i]; + else + powerlevel[i] = ppowerlevel_bw40[i]; + + powerbase1 = powerlevel[i]; + powerbase1 = (powerbase1 << 24) | + (powerbase1 << 16) | (powerbase1 << 8) | powerbase1; + + *(mcsbase + i) = powerbase1; + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + " [MCS power base index rf(%c) = 0x%x]\n", + ((i == 0) ? 'A' : 'B'), *(mcsbase + i)); + } +} + +static void _rtl88e_get_txpower_writeval_by_regulatory(struct ieee80211_hw *hw, + u8 channel, u8 index, + u32 *powerbase0, + u32 *powerbase1, + u32 *p_outwriteval) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 i, chnlgroup = 0, pwr_diff_limit[4], pwr_diff = 0, customer_pwr_diff; + u32 writeval, customer_limit, rf; + + for (rf = 0; rf < 2; rf++) { + switch (rtlefuse->eeprom_regulatory) { + case 0: + chnlgroup = 0; + + writeval = + rtlphy->mcs_txpwrlevel_origoffset + [chnlgroup][index + (rf ? 8 : 0)] + + ((index < 2) ? powerbase0[rf] : powerbase1[rf]); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "RTK better performance, writeval(%c) = 0x%x\n", + ((rf == 0) ? 'A' : 'B'), writeval); + break; + case 1: + if (rtlphy->pwrgroup_cnt == 1) { + chnlgroup = 0; + } else { + if (channel < 3) + chnlgroup = 0; + else if (channel < 6) + chnlgroup = 1; + else if (channel < 9) + chnlgroup = 2; + else if (channel < 12) + chnlgroup = 3; + else if (channel < 14) + chnlgroup = 4; + else if (channel == 14) + chnlgroup = 5; + } + + writeval = + rtlphy->mcs_txpwrlevel_origoffset[chnlgroup] + [index + (rf ? 8 : 0)] + ((index < 2) ? + powerbase0[rf] : + powerbase1[rf]); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "Realtek regulatory, 20MHz, writeval(%c) = 0x%x\n", + ((rf == 0) ? 'A' : 'B'), writeval); + + break; + case 2: + writeval = + ((index < 2) ? powerbase0[rf] : powerbase1[rf]); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "Better regulatory, writeval(%c) = 0x%x\n", + ((rf == 0) ? 'A' : 'B'), writeval); + break; + case 3: + chnlgroup = 0; + + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) { + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "customer's limit, 40MHz rf(%c) = 0x%x\n", + ((rf == 0) ? 'A' : 'B'), + rtlefuse->pwrgroup_ht40[rf][channel - + 1]); + } else { + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "customer's limit, 20MHz rf(%c) = 0x%x\n", + ((rf == 0) ? 'A' : 'B'), + rtlefuse->pwrgroup_ht20[rf][channel - + 1]); + } + + if (index < 2) + pwr_diff = + rtlefuse->txpwr_legacyhtdiff[rf][channel-1]; + else if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) + pwr_diff = + rtlefuse->txpwr_ht20diff[rf][channel-1]; + + if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) + customer_pwr_diff = + rtlefuse->pwrgroup_ht40[rf][channel-1]; + else + customer_pwr_diff = + rtlefuse->pwrgroup_ht20[rf][channel-1]; + + if (pwr_diff > customer_pwr_diff) + pwr_diff = 0; + else + pwr_diff = customer_pwr_diff - pwr_diff; + + for (i = 0; i < 4; i++) { + pwr_diff_limit[i] = + (u8)((rtlphy->mcs_txpwrlevel_origoffset + [chnlgroup][index + + (rf ? 8 : 0)] & (0x7f << + (i * 8))) >> (i * 8)); + + if (pwr_diff_limit[i] > pwr_diff) + pwr_diff_limit[i] = pwr_diff; + } + + customer_limit = (pwr_diff_limit[3] << 24) | + (pwr_diff_limit[2] << 16) | + (pwr_diff_limit[1] << 8) | (pwr_diff_limit[0]); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "Customer's limit rf(%c) = 0x%x\n", + ((rf == 0) ? 'A' : 'B'), customer_limit); + + writeval = customer_limit + + ((index < 2) ? powerbase0[rf] : powerbase1[rf]); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "Customer, writeval rf(%c)= 0x%x\n", + ((rf == 0) ? 'A' : 'B'), writeval); + break; + default: + chnlgroup = 0; + writeval = + rtlphy->mcs_txpwrlevel_origoffset[chnlgroup] + [index + (rf ? 8 : 0)] + + ((index < 2) ? powerbase0[rf] : powerbase1[rf]); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "RTK better performance, writeval rf(%c) = 0x%x\n", + ((rf == 0) ? 'A' : 'B'), writeval); + break; + } + + if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1) + writeval = writeval - 0x06060606; + else if (rtlpriv->dm.dynamic_txhighpower_lvl == + TXHIGHPWRLEVEL_BT2) + writeval = writeval - 0x0c0c0c0c; + *(p_outwriteval + rf) = writeval; + } +} + +static void _rtl88e_write_ofdm_power_reg(struct ieee80211_hw *hw, + u8 index, u32 *value) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u16 regoffset_a[6] = { + RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24, + RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04, + RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12 + }; + u16 regoffset_b[6] = { + RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24, + RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04, + RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12 + }; + u8 i, rf, pwr_val[4]; + u32 writeval; + u16 regoffset; + + for (rf = 0; rf < 2; rf++) { + writeval = value[rf]; + for (i = 0; i < 4; i++) { + pwr_val[i] = (u8)((writeval & (0x7f << + (i * 8))) >> (i * 8)); + + if (pwr_val[i] > RF6052_MAX_TX_PWR) + pwr_val[i] = RF6052_MAX_TX_PWR; + } + writeval = (pwr_val[3] << 24) | (pwr_val[2] << 16) | + (pwr_val[1] << 8) | pwr_val[0]; + + if (rf == 0) + regoffset = regoffset_a[index]; + else + regoffset = regoffset_b[index]; + rtl_set_bbreg(hw, regoffset, MASKDWORD, writeval); + + RTPRINT(rtlpriv, FPHY, PHY_TXPWR, + "Set 0x%x = %08x\n", regoffset, writeval); + } +} + +void rtl88e_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw, + u8 *ppowerlevel_ofdm, + u8 *ppowerlevel_bw20, + u8 *ppowerlevel_bw40, u8 channel) +{ + u32 writeval[2], powerbase0[2], powerbase1[2]; + u8 index; + u8 direction; + u32 pwrtrac_value; + + rtl88e_phy_get_power_base(hw, ppowerlevel_ofdm, + ppowerlevel_bw20, ppowerlevel_bw40, + channel, &powerbase0[0], &powerbase1[0]); + + rtl88e_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value); + + for (index = 0; index < 6; index++) { + _rtl88e_get_txpower_writeval_by_regulatory(hw, + channel, index, + &powerbase0[0], + &powerbase1[0], + &writeval[0]); + if (direction == 1) { + writeval[0] += pwrtrac_value; + writeval[1] += pwrtrac_value; + } else if (direction == 2) { + writeval[0] -= pwrtrac_value; + writeval[1] -= pwrtrac_value; + } + _rtl88e_write_ofdm_power_reg(hw, index, &writeval[0]); + } +} + +bool rtl88e_phy_rf6052_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + + if (rtlphy->rf_type == RF_1T1R) + rtlphy->num_total_rfpath = 1; + else + rtlphy->num_total_rfpath = 2; + + return _rtl88e_phy_rf6052_config_parafile(hw); +} + +static bool _rtl88e_phy_rf6052_config_parafile(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &rtlpriv->phy; + u32 u4_regvalue = 0; + u8 rfpath; + bool rtstatus = true; + struct bb_reg_def *pphyreg; + + for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) { + pphyreg = &rtlphy->phyreg_def[rfpath]; + + switch (rfpath) { + case RF90_PATH_A: + case RF90_PATH_C: + u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs, + BRFSI_RFENV); + break; + case RF90_PATH_B: + case RF90_PATH_D: + u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs, + BRFSI_RFENV << 16); + break; + } + + rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1); + udelay(1); + + rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1); + udelay(1); + + rtl_set_bbreg(hw, pphyreg->rfhssi_para2, + B3WIREADDREAALENGTH, 0x0); + udelay(1); + + rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0); + udelay(1); + + switch (rfpath) { + case RF90_PATH_A: + rtstatus = rtl88e_phy_config_rf_with_headerfile(hw, + (enum radio_path)rfpath); + break; + case RF90_PATH_B: + rtstatus = rtl88e_phy_config_rf_with_headerfile(hw, + (enum radio_path)rfpath); + break; + case RF90_PATH_C: + break; + case RF90_PATH_D: + break; + } + + switch (rfpath) { + case RF90_PATH_A: + case RF90_PATH_C: + rtl_set_bbreg(hw, pphyreg->rfintfs, + BRFSI_RFENV, u4_regvalue); + break; + case RF90_PATH_B: + case RF90_PATH_D: + rtl_set_bbreg(hw, pphyreg->rfintfs, + BRFSI_RFENV << 16, u4_regvalue); + break; + } + + if (!rtstatus) { + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, + "Radio[%d] Fail!!\n", rfpath); + return false; + } + + } + + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, "\n"); + return rtstatus; +} -- cgit v1.2.3