From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../net/wireless/realtek/rtlwifi/rtl8192de/sw.c | 395 +++++++++++++++++++++ 1 file changed, 395 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c') diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c new file mode 100644 index 000000000..a74724c97 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2009-2012 Realtek Corporation.*/ + +#include "../wifi.h" +#include "../core.h" +#include "../pci.h" +#include "../base.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "dm.h" +#include "hw.h" +#include "sw.h" +#include "trx.h" +#include "led.h" + +#include + +static void rtl92d_init_aspm_vars(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + /*close ASPM for AMD defaultly */ + rtlpci->const_amdpci_aspm = 0; + + /* + * ASPM PS mode. + * 0 - Disable ASPM, + * 1 - Enable ASPM without Clock Req, + * 2 - Enable ASPM with Clock Req, + * 3 - Alwyas Enable ASPM with Clock Req, + * 4 - Always Enable ASPM without Clock Req. + * set defult to RTL8192CE:3 RTL8192E:2 + * */ + rtlpci->const_pci_aspm = 3; + + /*Setting for PCI-E device */ + rtlpci->const_devicepci_aspm_setting = 0x03; + + /*Setting for PCI-E bridge */ + rtlpci->const_hostpci_aspm_setting = 0x02; + + /* + * In Hw/Sw Radio Off situation. + * 0 - Default, + * 1 - From ASPM setting without low Mac Pwr, + * 2 - From ASPM setting with low Mac Pwr, + * 3 - Bus D3 + * set default to RTL8192CE:0 RTL8192SE:2 + */ + rtlpci->const_hwsw_rfoff_d3 = 0; + + /* + * This setting works for those device with + * backdoor ASPM setting such as EPHY setting. + * 0 - Not support ASPM, + * 1 - Support ASPM, + * 2 - According to chipset. + */ + rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support; +} + +static int rtl92d_init_sw_vars(struct ieee80211_hw *hw) +{ + int err; + u8 tid; + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + char *fw_name = "rtlwifi/rtl8192defw.bin"; + + rtlpriv->dm.dm_initialgain_enable = true; + rtlpriv->dm.dm_flag = 0; + rtlpriv->dm.disable_framebursting = false; + rtlpriv->dm.thermalvalue = 0; + rtlpriv->dm.useramask = true; + + /* dual mac */ + if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G) + rtlpriv->phy.current_channel = 36; + else + rtlpriv->phy.current_channel = 1; + + if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { + rtlpriv->rtlhal.disable_amsdu_8k = true; + /* No long RX - reduce fragmentation */ + rtlpci->rxbuffersize = 4096; + } + + rtlpci->transmit_config = CFENDFORM | BIT(12) | BIT(13); + + rtlpci->receive_config = ( + RCR_APPFCS + | RCR_AMF + | RCR_ADF + | RCR_APP_MIC + | RCR_APP_ICV + | RCR_AICV + | RCR_ACRC32 + | RCR_AB + | RCR_AM + | RCR_APM + | RCR_APP_PHYST_RXFF + | RCR_HTC_LOC_CTRL + ); + + rtlpci->irq_mask[0] = (u32) ( + IMR_ROK + | IMR_VODOK + | IMR_VIDOK + | IMR_BEDOK + | IMR_BKDOK + | IMR_MGNTDOK + | IMR_HIGHDOK + | IMR_BDOK + | IMR_RDU + | IMR_RXFOVW + ); + + rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD); + + /* for LPS & IPS */ + rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps; + rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps; + rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps; + if (!rtlpriv->psc.inactiveps) + pr_info("Power Save off (module option)\n"); + if (!rtlpriv->psc.fwctrl_lps) + pr_info("FW Power Save off (module option)\n"); + rtlpriv->psc.reg_fwctrl_lps = 3; + rtlpriv->psc.reg_max_lps_awakeintvl = 5; + /* for ASPM, you can close aspm through + * set const_support_pciaspm = 0 */ + rtl92d_init_aspm_vars(hw); + + if (rtlpriv->psc.reg_fwctrl_lps == 1) + rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 2) + rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE; + else if (rtlpriv->psc.reg_fwctrl_lps == 3) + rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE; + + /* for early mode */ + rtlpriv->rtlhal.earlymode_enable = false; + for (tid = 0; tid < 8; tid++) + skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]); + + /* for firmware buf */ + rtlpriv->rtlhal.pfirmware = vzalloc(0x8000); + if (!rtlpriv->rtlhal.pfirmware) { + pr_err("Can't alloc buffer for fw\n"); + return 1; + } + + rtlpriv->max_fw_size = 0x8000; + pr_info("Driver for Realtek RTL8192DE WLAN interface\n"); + pr_info("Loading firmware file %s\n", fw_name); + + /* request fw */ + err = request_firmware_nowait(THIS_MODULE, 1, fw_name, + rtlpriv->io.dev, GFP_KERNEL, hw, + rtl_fw_cb); + if (err) { + pr_err("Failed to request firmware!\n"); + vfree(rtlpriv->rtlhal.pfirmware); + rtlpriv->rtlhal.pfirmware = NULL; + return 1; + } + + return 0; +} + +static void rtl92d_deinit_sw_vars(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 tid; + + if (rtlpriv->rtlhal.pfirmware) { + vfree(rtlpriv->rtlhal.pfirmware); + rtlpriv->rtlhal.pfirmware = NULL; + } + for (tid = 0; tid < 8; tid++) + skb_queue_purge(&rtlpriv->mac80211.skb_waitq[tid]); +} + +static struct rtl_hal_ops rtl8192de_hal_ops = { + .init_sw_vars = rtl92d_init_sw_vars, + .deinit_sw_vars = rtl92d_deinit_sw_vars, + .read_eeprom_info = rtl92de_read_eeprom_info, + .interrupt_recognized = rtl92de_interrupt_recognized, + .hw_init = rtl92de_hw_init, + .hw_disable = rtl92de_card_disable, + .hw_suspend = rtl92de_suspend, + .hw_resume = rtl92de_resume, + .enable_interrupt = rtl92de_enable_interrupt, + .disable_interrupt = rtl92de_disable_interrupt, + .set_network_type = rtl92de_set_network_type, + .set_chk_bssid = rtl92de_set_check_bssid, + .set_qos = rtl92de_set_qos, + .set_bcn_reg = rtl92de_set_beacon_related_registers, + .set_bcn_intv = rtl92de_set_beacon_interval, + .update_interrupt_mask = rtl92de_update_interrupt_mask, + .get_hw_reg = rtl92de_get_hw_reg, + .set_hw_reg = rtl92de_set_hw_reg, + .update_rate_tbl = rtl92de_update_hal_rate_tbl, + .fill_tx_desc = rtl92de_tx_fill_desc, + .fill_tx_cmddesc = rtl92de_tx_fill_cmddesc, + .query_rx_desc = rtl92de_rx_query_desc, + .set_channel_access = rtl92de_update_channel_access_setting, + .radio_onoff_checking = rtl92de_gpio_radio_on_off_checking, + .set_bw_mode = rtl92d_phy_set_bw_mode, + .switch_channel = rtl92d_phy_sw_chnl, + .dm_watchdog = rtl92d_dm_watchdog, + .scan_operation_backup = rtl_phy_scan_operation_backup, + .set_rf_power_state = rtl92d_phy_set_rf_power_state, + .led_control = rtl92de_led_control, + .set_desc = rtl92de_set_desc, + .get_desc = rtl92de_get_desc, + .is_tx_desc_closed = rtl92de_is_tx_desc_closed, + .tx_polling = rtl92de_tx_polling, + .enable_hw_sec = rtl92de_enable_hw_security_config, + .set_key = rtl92de_set_key, + .init_sw_leds = rtl92de_init_sw_leds, + .get_bbreg = rtl92d_phy_query_bb_reg, + .set_bbreg = rtl92d_phy_set_bb_reg, + .get_rfreg = rtl92d_phy_query_rf_reg, + .set_rfreg = rtl92d_phy_set_rf_reg, + .linked_set_reg = rtl92d_linked_set_reg, + .get_btc_status = rtl_btc_status_false, +}; + +static struct rtl_mod_params rtl92de_mod_params = { + .sw_crypto = false, + .inactiveps = true, + .swctrl_lps = true, + .fwctrl_lps = false, + .aspm_support = 1, + .debug_level = 0, + .debug_mask = 0, +}; + +static const struct rtl_hal_cfg rtl92de_hal_cfg = { + .bar_id = 2, + .write_readback = true, + .name = "rtl8192de", + .ops = &rtl8192de_hal_ops, + .mod_params = &rtl92de_mod_params, + + .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL, + .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN, + .maps[SYS_CLK] = REG_SYS_CLKR, + .maps[MAC_RCR_AM] = RCR_AM, + .maps[MAC_RCR_AB] = RCR_AB, + .maps[MAC_RCR_ACRC32] = RCR_ACRC32, + .maps[MAC_RCR_ACF] = RCR_ACF, + .maps[MAC_RCR_AAP] = RCR_AAP, + + .maps[EFUSE_TEST] = REG_EFUSE_TEST, + .maps[EFUSE_CTRL] = REG_EFUSE_CTRL, + .maps[EFUSE_CLK] = 0, /* just for 92se */ + .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL, + .maps[EFUSE_PWC_EV12V] = PWC_EV12V, + .maps[EFUSE_FEN_ELDR] = FEN_ELDR, + .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN, + .maps[EFUSE_ANA8M] = 0, /* just for 92se */ + .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE, + .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION, + .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN, + + .maps[RWCAM] = REG_CAMCMD, + .maps[WCAMI] = REG_CAMWRITE, + .maps[RCAMO] = REG_CAMREAD, + .maps[CAMDBG] = REG_CAMDBG, + .maps[SECR] = REG_SECCFG, + .maps[SEC_CAM_NONE] = CAM_NONE, + .maps[SEC_CAM_WEP40] = CAM_WEP40, + .maps[SEC_CAM_TKIP] = CAM_TKIP, + .maps[SEC_CAM_AES] = CAM_AES, + .maps[SEC_CAM_WEP104] = CAM_WEP104, + + .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6, + .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5, + .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4, + .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3, + .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2, + .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1, + .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8, + .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7, + .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6, + .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5, + .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4, + .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3, + .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2, + .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1, + .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2, + .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1, + + .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW, + .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT, + .maps[RTL_IMR_BCNINT] = IMR_BCNINT, + .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW, + .maps[RTL_IMR_RDU] = IMR_RDU, + .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND, + .maps[RTL_IMR_BDOK] = IMR_BDOK, + .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK, + .maps[RTL_IMR_TBDER] = IMR_TBDER, + .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK, + .maps[RTL_IMR_TBDOK] = IMR_TBDOK, + .maps[RTL_IMR_BKDOK] = IMR_BKDOK, + .maps[RTL_IMR_BEDOK] = IMR_BEDOK, + .maps[RTL_IMR_VIDOK] = IMR_VIDOK, + .maps[RTL_IMR_VODOK] = IMR_VODOK, + .maps[RTL_IMR_ROK] = IMR_ROK, + .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER), + + .maps[RTL_RC_CCK_RATE1M] = DESC_RATE1M, + .maps[RTL_RC_CCK_RATE2M] = DESC_RATE2M, + .maps[RTL_RC_CCK_RATE5_5M] = DESC_RATE5_5M, + .maps[RTL_RC_CCK_RATE11M] = DESC_RATE11M, + .maps[RTL_RC_OFDM_RATE6M] = DESC_RATE6M, + .maps[RTL_RC_OFDM_RATE9M] = DESC_RATE9M, + .maps[RTL_RC_OFDM_RATE12M] = DESC_RATE12M, + .maps[RTL_RC_OFDM_RATE18M] = DESC_RATE18M, + .maps[RTL_RC_OFDM_RATE24M] = DESC_RATE24M, + .maps[RTL_RC_OFDM_RATE36M] = DESC_RATE36M, + .maps[RTL_RC_OFDM_RATE48M] = DESC_RATE48M, + .maps[RTL_RC_OFDM_RATE54M] = DESC_RATE54M, + + .maps[RTL_RC_HT_RATEMCS7] = DESC_RATEMCS7, + .maps[RTL_RC_HT_RATEMCS15] = DESC_RATEMCS15, +}; + +static const struct pci_device_id rtl92de_pci_ids[] = { + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8193, rtl92de_hal_cfg)}, + {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x002B, rtl92de_hal_cfg)}, + {}, +}; + +MODULE_DEVICE_TABLE(pci, rtl92de_pci_ids); + +MODULE_AUTHOR("lizhaoming "); +MODULE_AUTHOR("Realtek WlanFAE "); +MODULE_AUTHOR("Larry Finger "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Realtek 8192DE 802.11n Dual Mac PCI wireless"); +MODULE_FIRMWARE("rtlwifi/rtl8192defw.bin"); + +module_param_named(swenc, rtl92de_mod_params.sw_crypto, bool, 0444); +module_param_named(debug_level, rtl92de_mod_params.debug_level, int, 0644); +module_param_named(ips, rtl92de_mod_params.inactiveps, bool, 0444); +module_param_named(swlps, rtl92de_mod_params.swctrl_lps, bool, 0444); +module_param_named(fwlps, rtl92de_mod_params.fwctrl_lps, bool, 0444); +module_param_named(aspm, rtl92de_mod_params.aspm_support, int, 0444); +module_param_named(debug_mask, rtl92de_mod_params.debug_mask, ullong, 0644); +MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n"); +MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n"); +MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n"); +MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n"); +MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n"); +MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)"); +MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)"); + +static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume); + +static struct pci_driver rtl92de_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl92de_pci_ids, + .probe = rtl_pci_probe, + .remove = rtl_pci_disconnect, + .driver.pm = &rtlwifi_pm_ops, +}; + +/* add global spin lock to solve the problem that + * Dul mac register operation on the same time */ +DEFINE_SPINLOCK(globalmutex_power); +DEFINE_SPINLOCK(globalmutex_for_fwdownload); +DEFINE_SPINLOCK(globalmutex_for_power_and_efuse); + +static int __init rtl92de_module_init(void) +{ + int ret = 0; + + ret = pci_register_driver(&rtl92de_driver); + if (ret) + WARN_ONCE(true, "rtl8192de: No device found\n"); + return ret; +} + +static void __exit rtl92de_module_exit(void) +{ + pci_unregister_driver(&rtl92de_driver); +} + +module_init(rtl92de_module_init); +module_exit(rtl92de_module_exit); -- cgit v1.2.3