From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h | 318 +++++++++++++++++++++ 1 file changed, 318 insertions(+) create mode 100644 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h') diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h new file mode 100644 index 000000000..d9247a8f3 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h @@ -0,0 +1,318 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2009-2012 Realtek Corporation.*/ + +#ifndef __RTL8723E_PWRSEQ_H__ +#define __RTL8723E_PWRSEQ_H__ + +#include "../pwrseqcmd.h" +/* + * Check document WM-20110607-Paul-RTL8723A_Power_Architecture-R02.vsd + * There are 6 HW Power States: + * 0: POFF--Power Off + * 1: PDN--Power Down + * 2: CARDEMU--Card Emulation + * 3: ACT--Active Mode + * 4: LPS--Low Power State + * 5: SUS--Suspend + * + * The transision from different states are defined below + * TRANS_CARDEMU_TO_ACT + * TRANS_ACT_TO_CARDEMU + * TRANS_CARDEMU_TO_SUS + * TRANS_SUS_TO_CARDEMU + * TRANS_CARDEMU_TO_PDN + * TRANS_ACT_TO_LPS + * TRANS_LPS_TO_ACT + * + * TRANS_END + */ + +#define RTL8723A_TRANS_CARDEMU_TO_ACT_STEPS 10 +#define RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS 10 +#define RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS 10 +#define RTL8723A_TRANS_SUS_TO_CARDEMU_STEPS 10 +#define RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS 10 +#define RTL8723A_TRANS_PDN_TO_CARDEMU_STEPS 10 +#define RTL8723A_TRANS_ACT_TO_LPS_STEPS 15 +#define RTL8723A_TRANS_LPS_TO_ACT_STEPS 15 +#define RTL8723A_TRANS_END_STEPS 1 + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }*/ + +#define RTL8723A_TRANS_CARDEMU_TO_ACT \ + /* disable SW LPS 0x04[10]=0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(2), 0},\ + /* wait till 0x04[17] = 1 power ready*/ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},\ + /* release WLON reset 0x04[16]=1*/ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},\ + /* disable HWPDN 0x04[15]=0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},\ + /* disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0},\ + /* polling until return 0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_ACT_TO_CARDEMU \ + /*0x1F[7:0] = 0 turn off RF*/ \ + {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \ + {0x004E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/ +#define RTL8723A_TRANS_CARDEMU_TO_SUS \ + /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, \ + BIT(4)|BIT(3), (BIT(4)|BIT(3))},\ +/*0x04[12:11] = 2b'01 enable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK| \ + PWR_INTF_SDIO_MSK,\ + PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, \ + BIT(3)|BIT(4), BIT(3)}, \ +/*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT(3)|BIT(4), \ + BIT(3)|BIT(4)}, \ +/*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, BIT(0), BIT(0)}, \ +/*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_POLLING, BIT(1), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_SUS_TO_CARDEMU \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},\ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},\ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_CARDEMU_TO_CARDDIS \ + /*0x04[12:11] = 2b'01 enable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \ +/*0x04[10] = 1, enable SW LPS*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(2), BIT(2)}, \ +/*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_POLLING, BIT(1), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_CARDDIS_TO_CARDEMU\ +/*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, BIT(0), 0}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_POLLING, BIT(1), BIT(1)},\ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(3)|BIT(4), 0},\ +/*PCIe DMA start*/ \ + {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ +#define RTL8723A_TRANS_CARDEMU_TO_PDN \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/ + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ +#define RTL8723A_TRANS_PDN_TO_CARDEMU \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/ + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_ACT_TO_LPS \ + {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0xFF},/*PCIe DMA stop*/ \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \ + /*Should be zero if no packet is transmitting*/ \ + {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*Should be zero if no packet is transmitting*/ \ + {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*Should be zero if no packet is transmitting*/ \ + {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*Should be zero if no packet is transmitting*/ \ + {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*CCK and OFDM are disabled,and clock are gated*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(0), 0},\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1), 0},/*Whole BB is reset*/ \ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/ \ + /*Respond TxOK to scheduler*/ \ + {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(5), BIT(5)},\ + +#define RTL8723A_TRANS_LPS_TO_ACT\ +/* format */ \ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ \ + {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\ + {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\ + {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\ + /*. 0x08[4] = 0 switch TSF to 40M*/\ + {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(4), 0}, \ + /*Polling 0x109[7]=0 TSF in 40M*/\ + {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, BIT(7), 0}, \ + /*. 0x29[7:6] = 2b'00 enable BB clock*/\ + {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(6)|BIT(7), 0},\ + /*. 0x101[1] = 1*/\ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1), BIT(1)},\ + /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0xFF},\ + /*. 0x02[1:0] = 2b'11 enable BB macro*/\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)},\ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/ + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_END \ + {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + 0, PWR_CMD_END, 0, 0} + +extern struct wlan_pwr_cfg rtl8723A_power_on_flow + [RTL8723A_TRANS_CARDEMU_TO_ACT_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_radio_off_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_card_disable_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_card_enable_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_suspend_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_resume_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_hwpdn_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_enter_lps_flow + [RTL8723A_TRANS_ACT_TO_LPS_STEPS + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_leave_lps_flow + [RTL8723A_TRANS_LPS_TO_ACT_STEPS + RTL8723A_TRANS_END_STEPS]; + +/* RTL8723 Power Configuration CMDs for PCIe interface */ +#define RTL8723_NIC_PWR_ON_FLOW rtl8723A_power_on_flow +#define RTL8723_NIC_RF_OFF_FLOW rtl8723A_radio_off_flow +#define RTL8723_NIC_DISABLE_FLOW rtl8723A_card_disable_flow +#define RTL8723_NIC_ENABLE_FLOW rtl8723A_card_enable_flow +#define RTL8723_NIC_SUSPEND_FLOW rtl8723A_suspend_flow +#define RTL8723_NIC_RESUME_FLOW rtl8723A_resume_flow +#define RTL8723_NIC_PDN_FLOW rtl8723A_hwpdn_flow +#define RTL8723_NIC_LPS_ENTER_FLOW rtl8723A_enter_lps_flow +#define RTL8723_NIC_LPS_LEAVE_FLOW rtl8723A_leave_lps_flow + +#endif -- cgit v1.2.3