From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/st/cw1200/bh.c | 605 ++++++++++++++++++++++++++++++++++++ 1 file changed, 605 insertions(+) create mode 100644 drivers/net/wireless/st/cw1200/bh.c (limited to 'drivers/net/wireless/st/cw1200/bh.c') diff --git a/drivers/net/wireless/st/cw1200/bh.c b/drivers/net/wireless/st/cw1200/bh.c new file mode 100644 index 000000000..3b4ded2ac --- /dev/null +++ b/drivers/net/wireless/st/cw1200/bh.c @@ -0,0 +1,605 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device handling thread implementation for mac80211 ST-Ericsson CW1200 drivers + * + * Copyright (c) 2010, ST-Ericsson + * Author: Dmitry Tarnyagin + * + * Based on: + * ST-Ericsson UMAC CW1200 driver, which is + * Copyright (c) 2010, ST-Ericsson + * Author: Ajitpal Singh + */ + +#include +#include +#include +#include + +#include "cw1200.h" +#include "bh.h" +#include "hwio.h" +#include "wsm.h" +#include "hwbus.h" +#include "debug.h" +#include "fwio.h" + +static int cw1200_bh(void *arg); + +#define DOWNLOAD_BLOCK_SIZE_WR (0x1000 - 4) +/* an SPI message cannot be bigger than (2"12-1)*2 bytes + * "*2" to cvt to bytes + */ +#define MAX_SZ_RD_WR_BUFFERS (DOWNLOAD_BLOCK_SIZE_WR*2) +#define PIGGYBACK_CTRL_REG (2) +#define EFFECTIVE_BUF_SIZE (MAX_SZ_RD_WR_BUFFERS - PIGGYBACK_CTRL_REG) + +/* Suspend state privates */ +enum cw1200_bh_pm_state { + CW1200_BH_RESUMED = 0, + CW1200_BH_SUSPEND, + CW1200_BH_SUSPENDED, + CW1200_BH_RESUME, +}; + +static void cw1200_bh_work(struct work_struct *work) +{ + struct cw1200_common *priv = + container_of(work, struct cw1200_common, bh_work); + cw1200_bh(priv); +} + +int cw1200_register_bh(struct cw1200_common *priv) +{ + int err = 0; + /* Realtime workqueue */ + priv->bh_workqueue = alloc_workqueue("cw1200_bh", + WQ_MEM_RECLAIM | WQ_HIGHPRI + | WQ_CPU_INTENSIVE, 1); + + if (!priv->bh_workqueue) + return -ENOMEM; + + INIT_WORK(&priv->bh_work, cw1200_bh_work); + + pr_debug("[BH] register.\n"); + + atomic_set(&priv->bh_rx, 0); + atomic_set(&priv->bh_tx, 0); + atomic_set(&priv->bh_term, 0); + atomic_set(&priv->bh_suspend, CW1200_BH_RESUMED); + priv->bh_error = 0; + priv->hw_bufs_used = 0; + priv->buf_id_tx = 0; + priv->buf_id_rx = 0; + init_waitqueue_head(&priv->bh_wq); + init_waitqueue_head(&priv->bh_evt_wq); + + err = !queue_work(priv->bh_workqueue, &priv->bh_work); + WARN_ON(err); + return err; +} + +void cw1200_unregister_bh(struct cw1200_common *priv) +{ + atomic_inc(&priv->bh_term); + wake_up(&priv->bh_wq); + + destroy_workqueue(priv->bh_workqueue); + priv->bh_workqueue = NULL; + + pr_debug("[BH] unregistered.\n"); +} + +void cw1200_irq_handler(struct cw1200_common *priv) +{ + pr_debug("[BH] irq.\n"); + + /* Disable Interrupts! */ + /* NOTE: hwbus_ops->lock already held */ + __cw1200_irq_enable(priv, 0); + + if (/* WARN_ON */(priv->bh_error)) + return; + + if (atomic_inc_return(&priv->bh_rx) == 1) + wake_up(&priv->bh_wq); +} +EXPORT_SYMBOL_GPL(cw1200_irq_handler); + +void cw1200_bh_wakeup(struct cw1200_common *priv) +{ + pr_debug("[BH] wakeup.\n"); + if (priv->bh_error) { + pr_err("[BH] wakeup failed (BH error)\n"); + return; + } + + if (atomic_inc_return(&priv->bh_tx) == 1) + wake_up(&priv->bh_wq); +} + +int cw1200_bh_suspend(struct cw1200_common *priv) +{ + pr_debug("[BH] suspend.\n"); + if (priv->bh_error) { + wiphy_warn(priv->hw->wiphy, "BH error -- can't suspend\n"); + return -EINVAL; + } + + atomic_set(&priv->bh_suspend, CW1200_BH_SUSPEND); + wake_up(&priv->bh_wq); + return wait_event_timeout(priv->bh_evt_wq, priv->bh_error || + (CW1200_BH_SUSPENDED == atomic_read(&priv->bh_suspend)), + 1 * HZ) ? 0 : -ETIMEDOUT; +} + +int cw1200_bh_resume(struct cw1200_common *priv) +{ + pr_debug("[BH] resume.\n"); + if (priv->bh_error) { + wiphy_warn(priv->hw->wiphy, "BH error -- can't resume\n"); + return -EINVAL; + } + + atomic_set(&priv->bh_suspend, CW1200_BH_RESUME); + wake_up(&priv->bh_wq); + return wait_event_timeout(priv->bh_evt_wq, priv->bh_error || + (CW1200_BH_RESUMED == atomic_read(&priv->bh_suspend)), + 1 * HZ) ? 0 : -ETIMEDOUT; +} + +static inline void wsm_alloc_tx_buffer(struct cw1200_common *priv) +{ + ++priv->hw_bufs_used; +} + +int wsm_release_tx_buffer(struct cw1200_common *priv, int count) +{ + int ret = 0; + int hw_bufs_used = priv->hw_bufs_used; + + priv->hw_bufs_used -= count; + if (WARN_ON(priv->hw_bufs_used < 0)) + ret = -1; + else if (hw_bufs_used >= priv->wsm_caps.input_buffers) + ret = 1; + if (!priv->hw_bufs_used) + wake_up(&priv->bh_evt_wq); + return ret; +} + +static int cw1200_bh_read_ctrl_reg(struct cw1200_common *priv, + u16 *ctrl_reg) +{ + int ret; + + ret = cw1200_reg_read_16(priv, + ST90TDS_CONTROL_REG_ID, ctrl_reg); + if (ret) { + ret = cw1200_reg_read_16(priv, + ST90TDS_CONTROL_REG_ID, ctrl_reg); + if (ret) + pr_err("[BH] Failed to read control register.\n"); + } + + return ret; +} + +static int cw1200_device_wakeup(struct cw1200_common *priv) +{ + u16 ctrl_reg; + int ret; + + pr_debug("[BH] Device wakeup.\n"); + + /* First, set the dpll register */ + ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID, + cw1200_dpll_from_clk(priv->hw_refclk)); + if (WARN_ON(ret)) + return ret; + + /* To force the device to be always-on, the host sets WLAN_UP to 1 */ + ret = cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID, + ST90TDS_CONT_WUP_BIT); + if (WARN_ON(ret)) + return ret; + + ret = cw1200_bh_read_ctrl_reg(priv, &ctrl_reg); + if (WARN_ON(ret)) + return ret; + + /* If the device returns WLAN_RDY as 1, the device is active and will + * remain active. + */ + if (ctrl_reg & ST90TDS_CONT_RDY_BIT) { + pr_debug("[BH] Device awake.\n"); + return 1; + } + + return 0; +} + +/* Must be called from BH thraed. */ +void cw1200_enable_powersave(struct cw1200_common *priv, + bool enable) +{ + pr_debug("[BH] Powerave is %s.\n", + enable ? "enabled" : "disabled"); + priv->powersave_enabled = enable; +} + +static int cw1200_bh_rx_helper(struct cw1200_common *priv, + uint16_t *ctrl_reg, + int *tx) +{ + size_t read_len = 0; + struct sk_buff *skb_rx = NULL; + struct wsm_hdr *wsm; + size_t wsm_len; + u16 wsm_id; + u8 wsm_seq; + int rx_resync = 1; + + size_t alloc_len; + u8 *data; + + read_len = (*ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) * 2; + if (!read_len) + return 0; /* No more work */ + + if (WARN_ON((read_len < sizeof(struct wsm_hdr)) || + (read_len > EFFECTIVE_BUF_SIZE))) { + pr_debug("Invalid read len: %zu (%04x)", + read_len, *ctrl_reg); + goto err; + } + + /* Add SIZE of PIGGYBACK reg (CONTROL Reg) + * to the NEXT Message length + 2 Bytes for SKB + */ + read_len = read_len + 2; + + alloc_len = priv->hwbus_ops->align_size( + priv->hwbus_priv, read_len); + + /* Check if not exceeding CW1200 capabilities */ + if (WARN_ON_ONCE(alloc_len > EFFECTIVE_BUF_SIZE)) { + pr_debug("Read aligned len: %zu\n", + alloc_len); + } + + skb_rx = dev_alloc_skb(alloc_len); + if (WARN_ON(!skb_rx)) + goto err; + + skb_trim(skb_rx, 0); + skb_put(skb_rx, read_len); + data = skb_rx->data; + if (WARN_ON(!data)) + goto err; + + if (WARN_ON(cw1200_data_read(priv, data, alloc_len))) { + pr_err("rx blew up, len %zu\n", alloc_len); + goto err; + } + + /* Piggyback */ + *ctrl_reg = __le16_to_cpu( + ((__le16 *)data)[alloc_len / 2 - 1]); + + wsm = (struct wsm_hdr *)data; + wsm_len = __le16_to_cpu(wsm->len); + if (WARN_ON(wsm_len > read_len)) + goto err; + + if (priv->wsm_enable_wsm_dumps) + print_hex_dump_bytes("<-- ", + DUMP_PREFIX_NONE, + data, wsm_len); + + wsm_id = __le16_to_cpu(wsm->id) & 0xFFF; + wsm_seq = (__le16_to_cpu(wsm->id) >> 13) & 7; + + skb_trim(skb_rx, wsm_len); + + if (wsm_id == 0x0800) { + wsm_handle_exception(priv, + &data[sizeof(*wsm)], + wsm_len - sizeof(*wsm)); + goto err; + } else if (!rx_resync) { + if (WARN_ON(wsm_seq != priv->wsm_rx_seq)) + goto err; + } + priv->wsm_rx_seq = (wsm_seq + 1) & 7; + rx_resync = 0; + + if (wsm_id & 0x0400) { + int rc = wsm_release_tx_buffer(priv, 1); + if (WARN_ON(rc < 0)) + return rc; + else if (rc > 0) + *tx = 1; + } + + /* cw1200_wsm_rx takes care on SKB livetime */ + if (WARN_ON(wsm_handle_rx(priv, wsm_id, wsm, &skb_rx))) + goto err; + + dev_kfree_skb(skb_rx); + + return 0; + +err: + dev_kfree_skb(skb_rx); + return -1; +} + +static int cw1200_bh_tx_helper(struct cw1200_common *priv, + int *pending_tx, + int *tx_burst) +{ + size_t tx_len; + u8 *data; + int ret; + struct wsm_hdr *wsm; + + if (priv->device_can_sleep) { + ret = cw1200_device_wakeup(priv); + if (WARN_ON(ret < 0)) { /* Error in wakeup */ + *pending_tx = 1; + return 0; + } else if (ret) { /* Woke up */ + priv->device_can_sleep = false; + } else { /* Did not awake */ + *pending_tx = 1; + return 0; + } + } + + wsm_alloc_tx_buffer(priv); + ret = wsm_get_tx(priv, &data, &tx_len, tx_burst); + if (ret <= 0) { + wsm_release_tx_buffer(priv, 1); + if (WARN_ON(ret < 0)) + return ret; /* Error */ + return 0; /* No work */ + } + + wsm = (struct wsm_hdr *)data; + BUG_ON(tx_len < sizeof(*wsm)); + BUG_ON(__le16_to_cpu(wsm->len) != tx_len); + + atomic_inc(&priv->bh_tx); + + tx_len = priv->hwbus_ops->align_size( + priv->hwbus_priv, tx_len); + + /* Check if not exceeding CW1200 capabilities */ + if (WARN_ON_ONCE(tx_len > EFFECTIVE_BUF_SIZE)) + pr_debug("Write aligned len: %zu\n", tx_len); + + wsm->id &= __cpu_to_le16(0xffff ^ WSM_TX_SEQ(WSM_TX_SEQ_MAX)); + wsm->id |= __cpu_to_le16(WSM_TX_SEQ(priv->wsm_tx_seq)); + + if (WARN_ON(cw1200_data_write(priv, data, tx_len))) { + pr_err("tx blew up, len %zu\n", tx_len); + wsm_release_tx_buffer(priv, 1); + return -1; /* Error */ + } + + if (priv->wsm_enable_wsm_dumps) + print_hex_dump_bytes("--> ", + DUMP_PREFIX_NONE, + data, + __le16_to_cpu(wsm->len)); + + wsm_txed(priv, data); + priv->wsm_tx_seq = (priv->wsm_tx_seq + 1) & WSM_TX_SEQ_MAX; + + if (*tx_burst > 1) { + cw1200_debug_tx_burst(priv); + return 1; /* Work remains */ + } + + return 0; +} + +static int cw1200_bh(void *arg) +{ + struct cw1200_common *priv = arg; + int rx, tx, term, suspend; + u16 ctrl_reg = 0; + int tx_allowed; + int pending_tx = 0; + int tx_burst; + long status; + u32 dummy; + int ret; + + for (;;) { + if (!priv->hw_bufs_used && + priv->powersave_enabled && + !priv->device_can_sleep && + !atomic_read(&priv->recent_scan)) { + status = 1 * HZ; + pr_debug("[BH] Device wakedown. No data.\n"); + cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID, 0); + priv->device_can_sleep = true; + } else if (priv->hw_bufs_used) { + /* Interrupt loss detection */ + status = 1 * HZ; + } else { + status = MAX_SCHEDULE_TIMEOUT; + } + + /* Dummy Read for SDIO retry mechanism*/ + if ((priv->hw_type != -1) && + (atomic_read(&priv->bh_rx) == 0) && + (atomic_read(&priv->bh_tx) == 0)) + cw1200_reg_read(priv, ST90TDS_CONFIG_REG_ID, + &dummy, sizeof(dummy)); + + pr_debug("[BH] waiting ...\n"); + status = wait_event_interruptible_timeout(priv->bh_wq, ({ + rx = atomic_xchg(&priv->bh_rx, 0); + tx = atomic_xchg(&priv->bh_tx, 0); + term = atomic_xchg(&priv->bh_term, 0); + suspend = pending_tx ? + 0 : atomic_read(&priv->bh_suspend); + (rx || tx || term || suspend || priv->bh_error); + }), status); + + pr_debug("[BH] - rx: %d, tx: %d, term: %d, bh_err: %d, suspend: %d, status: %ld\n", + rx, tx, term, suspend, priv->bh_error, status); + + /* Did an error occur? */ + if ((status < 0 && status != -ERESTARTSYS) || + term || priv->bh_error) { + break; + } + if (!status) { /* wait_event timed out */ + unsigned long timestamp = jiffies; + long timeout; + int pending = 0; + int i; + + /* Check to see if we have any outstanding frames */ + if (priv->hw_bufs_used && (!rx || !tx)) { + wiphy_warn(priv->hw->wiphy, + "Missed interrupt? (%d frames outstanding)\n", + priv->hw_bufs_used); + rx = 1; + + /* Get a timestamp of "oldest" frame */ + for (i = 0; i < 4; ++i) + pending += cw1200_queue_get_xmit_timestamp( + &priv->tx_queue[i], + ×tamp, + priv->pending_frame_id); + + /* Check if frame transmission is timed out. + * Add an extra second with respect to possible + * interrupt loss. + */ + timeout = timestamp + + WSM_CMD_LAST_CHANCE_TIMEOUT + + 1 * HZ - + jiffies; + + /* And terminate BH thread if the frame is "stuck" */ + if (pending && timeout < 0) { + wiphy_warn(priv->hw->wiphy, + "Timeout waiting for TX confirm (%d/%d pending, %ld vs %lu).\n", + priv->hw_bufs_used, pending, + timestamp, jiffies); + break; + } + } else if (!priv->device_can_sleep && + !atomic_read(&priv->recent_scan)) { + pr_debug("[BH] Device wakedown. Timeout.\n"); + cw1200_reg_write_16(priv, + ST90TDS_CONTROL_REG_ID, 0); + priv->device_can_sleep = true; + } + goto done; + } else if (suspend) { + pr_debug("[BH] Device suspend.\n"); + if (priv->powersave_enabled) { + pr_debug("[BH] Device wakedown. Suspend.\n"); + cw1200_reg_write_16(priv, + ST90TDS_CONTROL_REG_ID, 0); + priv->device_can_sleep = true; + } + + atomic_set(&priv->bh_suspend, CW1200_BH_SUSPENDED); + wake_up(&priv->bh_evt_wq); + status = wait_event_interruptible(priv->bh_wq, + CW1200_BH_RESUME == atomic_read(&priv->bh_suspend)); + if (status < 0) { + wiphy_err(priv->hw->wiphy, + "Failed to wait for resume: %ld.\n", + status); + break; + } + pr_debug("[BH] Device resume.\n"); + atomic_set(&priv->bh_suspend, CW1200_BH_RESUMED); + wake_up(&priv->bh_evt_wq); + atomic_inc(&priv->bh_rx); + goto done; + } + + rx: + tx += pending_tx; + pending_tx = 0; + + if (cw1200_bh_read_ctrl_reg(priv, &ctrl_reg)) + break; + + /* Don't bother trying to rx unless we have data to read */ + if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) { + ret = cw1200_bh_rx_helper(priv, &ctrl_reg, &tx); + if (ret < 0) + break; + /* Double up here if there's more data.. */ + if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) { + ret = cw1200_bh_rx_helper(priv, &ctrl_reg, &tx); + if (ret < 0) + break; + } + } + + tx: + if (tx) { + tx = 0; + + BUG_ON(priv->hw_bufs_used > priv->wsm_caps.input_buffers); + tx_burst = priv->wsm_caps.input_buffers - priv->hw_bufs_used; + tx_allowed = tx_burst > 0; + + if (!tx_allowed) { + /* Buffers full. Ensure we process tx + * after we handle rx.. + */ + pending_tx = tx; + goto done_rx; + } + ret = cw1200_bh_tx_helper(priv, &pending_tx, &tx_burst); + if (ret < 0) + break; + if (ret > 0) /* More to transmit */ + tx = ret; + + /* Re-read ctrl reg */ + if (cw1200_bh_read_ctrl_reg(priv, &ctrl_reg)) + break; + } + + done_rx: + if (priv->bh_error) + break; + if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) + goto rx; + if (tx) + goto tx; + + done: + /* Re-enable device interrupts */ + priv->hwbus_ops->lock(priv->hwbus_priv); + __cw1200_irq_enable(priv, 1); + priv->hwbus_ops->unlock(priv->hwbus_priv); + } + + /* Explicitly disable device interrupts */ + priv->hwbus_ops->lock(priv->hwbus_priv); + __cw1200_irq_enable(priv, 0); + priv->hwbus_ops->unlock(priv->hwbus_priv); + + if (!term) { + pr_err("[BH] Fatal error, exiting.\n"); + priv->bh_error = 1; + /* TODO: schedule_work(recovery) */ + } + return 0; +} -- cgit v1.2.3