From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/st/cw1200/cw1200_spi.c | 462 ++++++++++++++++++++++++++++ 1 file changed, 462 insertions(+) create mode 100644 drivers/net/wireless/st/cw1200/cw1200_spi.c (limited to 'drivers/net/wireless/st/cw1200/cw1200_spi.c') diff --git a/drivers/net/wireless/st/cw1200/cw1200_spi.c b/drivers/net/wireless/st/cw1200/cw1200_spi.c new file mode 100644 index 000000000..fe0d220da --- /dev/null +++ b/drivers/net/wireless/st/cw1200/cw1200_spi.c @@ -0,0 +1,462 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Mac80211 SPI driver for ST-Ericsson CW1200 device + * + * Copyright (c) 2011, Sagrad Inc. + * Author: Solomon Peachy + * + * Based on cw1200_sdio.c + * Copyright (c) 2010, ST-Ericsson + * Author: Dmitry Tarnyagin + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "cw1200.h" +#include "hwbus.h" +#include +#include "hwio.h" + +MODULE_AUTHOR("Solomon Peachy "); +MODULE_DESCRIPTION("mac80211 ST-Ericsson CW1200 SPI driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:cw1200_wlan_spi"); + +/* #define SPI_DEBUG */ + +struct hwbus_priv { + struct spi_device *func; + struct cw1200_common *core; + const struct cw1200_platform_data_spi *pdata; + spinlock_t lock; /* Serialize all bus operations */ + wait_queue_head_t wq; + int claimed; +}; + +#define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2) +#define SET_WRITE 0x7FFF /* usage: and operation */ +#define SET_READ 0x8000 /* usage: or operation */ + +/* Notes on byte ordering: + LE: B0 B1 B2 B3 + BE: B3 B2 B1 B0 + + Hardware expects 32-bit data to be written as 16-bit BE words: + + B1 B0 B3 B2 +*/ + +static int cw1200_spi_memcpy_fromio(struct hwbus_priv *self, + unsigned int addr, + void *dst, int count) +{ + int ret, i; + u16 regaddr; + struct spi_message m; + + struct spi_transfer t_addr = { + .tx_buf = ®addr, + .len = sizeof(regaddr), + }; + struct spi_transfer t_msg = { + .rx_buf = dst, + .len = count, + }; + + regaddr = (SDIO_TO_SPI_ADDR(addr))<<12; + regaddr |= SET_READ; + regaddr |= (count>>1); + +#ifdef SPI_DEBUG + pr_info("READ : %04d from 0x%02x (%04x)\n", count, addr, regaddr); +#endif + + /* Header is LE16 */ + regaddr = cpu_to_le16(regaddr); + + /* We have to byteswap if the SPI bus is limited to 8b operation + or we are running on a Big Endian system + */ +#if defined(__LITTLE_ENDIAN) + if (self->func->bits_per_word == 8) +#endif + regaddr = swab16(regaddr); + + spi_message_init(&m); + spi_message_add_tail(&t_addr, &m); + spi_message_add_tail(&t_msg, &m); + ret = spi_sync(self->func, &m); + +#ifdef SPI_DEBUG + pr_info("READ : "); + for (i = 0; i < t_addr.len; i++) + printk("%02x ", ((u8 *)t_addr.tx_buf)[i]); + printk(" : "); + for (i = 0; i < t_msg.len; i++) + printk("%02x ", ((u8 *)t_msg.rx_buf)[i]); + printk("\n"); +#endif + + /* We have to byteswap if the SPI bus is limited to 8b operation + or we are running on a Big Endian system + */ +#if defined(__LITTLE_ENDIAN) + if (self->func->bits_per_word == 8) +#endif + { + uint16_t *buf = (uint16_t *)dst; + for (i = 0; i < ((count + 1) >> 1); i++) + buf[i] = swab16(buf[i]); + } + + return ret; +} + +static int cw1200_spi_memcpy_toio(struct hwbus_priv *self, + unsigned int addr, + const void *src, int count) +{ + int rval, i; + u16 regaddr; + struct spi_transfer t_addr = { + .tx_buf = ®addr, + .len = sizeof(regaddr), + }; + struct spi_transfer t_msg = { + .tx_buf = src, + .len = count, + }; + struct spi_message m; + + regaddr = (SDIO_TO_SPI_ADDR(addr))<<12; + regaddr &= SET_WRITE; + regaddr |= (count>>1); + +#ifdef SPI_DEBUG + pr_info("WRITE: %04d to 0x%02x (%04x)\n", count, addr, regaddr); +#endif + + /* Header is LE16 */ + regaddr = cpu_to_le16(regaddr); + + /* We have to byteswap if the SPI bus is limited to 8b operation + or we are running on a Big Endian system + */ +#if defined(__LITTLE_ENDIAN) + if (self->func->bits_per_word == 8) +#endif + { + uint16_t *buf = (uint16_t *)src; + regaddr = swab16(regaddr); + for (i = 0; i < ((count + 1) >> 1); i++) + buf[i] = swab16(buf[i]); + } + +#ifdef SPI_DEBUG + pr_info("WRITE: "); + for (i = 0; i < t_addr.len; i++) + printk("%02x ", ((u8 *)t_addr.tx_buf)[i]); + printk(" : "); + for (i = 0; i < t_msg.len; i++) + printk("%02x ", ((u8 *)t_msg.tx_buf)[i]); + printk("\n"); +#endif + + spi_message_init(&m); + spi_message_add_tail(&t_addr, &m); + spi_message_add_tail(&t_msg, &m); + rval = spi_sync(self->func, &m); + +#ifdef SPI_DEBUG + pr_info("WROTE: %d\n", m.actual_length); +#endif + +#if defined(__LITTLE_ENDIAN) + /* We have to byteswap if the SPI bus is limited to 8b operation */ + if (self->func->bits_per_word == 8) +#endif + { + uint16_t *buf = (uint16_t *)src; + for (i = 0; i < ((count + 1) >> 1); i++) + buf[i] = swab16(buf[i]); + } + return rval; +} + +static void cw1200_spi_lock(struct hwbus_priv *self) +{ + unsigned long flags; + + DECLARE_WAITQUEUE(wait, current); + + might_sleep(); + + add_wait_queue(&self->wq, &wait); + spin_lock_irqsave(&self->lock, flags); + while (1) { + set_current_state(TASK_UNINTERRUPTIBLE); + if (!self->claimed) + break; + spin_unlock_irqrestore(&self->lock, flags); + schedule(); + spin_lock_irqsave(&self->lock, flags); + } + set_current_state(TASK_RUNNING); + self->claimed = 1; + spin_unlock_irqrestore(&self->lock, flags); + remove_wait_queue(&self->wq, &wait); + + return; +} + +static void cw1200_spi_unlock(struct hwbus_priv *self) +{ + unsigned long flags; + + spin_lock_irqsave(&self->lock, flags); + self->claimed = 0; + spin_unlock_irqrestore(&self->lock, flags); + wake_up(&self->wq); + + return; +} + +static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id) +{ + struct hwbus_priv *self = dev_id; + + if (self->core) { + cw1200_spi_lock(self); + cw1200_irq_handler(self->core); + cw1200_spi_unlock(self); + return IRQ_HANDLED; + } else { + return IRQ_NONE; + } +} + +static int cw1200_spi_irq_subscribe(struct hwbus_priv *self) +{ + int ret; + + pr_debug("SW IRQ subscribe\n"); + + ret = request_threaded_irq(self->func->irq, NULL, + cw1200_spi_irq_handler, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "cw1200_wlan_irq", self); + if (WARN_ON(ret < 0)) + goto exit; + + ret = enable_irq_wake(self->func->irq); + if (WARN_ON(ret)) + goto free_irq; + + return 0; + +free_irq: + free_irq(self->func->irq, self); +exit: + return ret; +} + +static void cw1200_spi_irq_unsubscribe(struct hwbus_priv *self) +{ + pr_debug("SW IRQ unsubscribe\n"); + disable_irq_wake(self->func->irq); + free_irq(self->func->irq, self); +} + +static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata) +{ + if (pdata->reset) { + gpio_set_value(pdata->reset, 0); + msleep(30); /* Min is 2 * CLK32K cycles */ + gpio_free(pdata->reset); + } + + if (pdata->power_ctrl) + pdata->power_ctrl(pdata, false); + if (pdata->clk_ctrl) + pdata->clk_ctrl(pdata, false); + + return 0; +} + +static int cw1200_spi_on(const struct cw1200_platform_data_spi *pdata) +{ + /* Ensure I/Os are pulled low */ + if (pdata->reset) { + gpio_request(pdata->reset, "cw1200_wlan_reset"); + gpio_direction_output(pdata->reset, 0); + } + if (pdata->powerup) { + gpio_request(pdata->powerup, "cw1200_wlan_powerup"); + gpio_direction_output(pdata->powerup, 0); + } + if (pdata->reset || pdata->powerup) + msleep(10); /* Settle time? */ + + /* Enable 3v3 and 1v8 to hardware */ + if (pdata->power_ctrl) { + if (pdata->power_ctrl(pdata, true)) { + pr_err("power_ctrl() failed!\n"); + return -1; + } + } + + /* Enable CLK32K */ + if (pdata->clk_ctrl) { + if (pdata->clk_ctrl(pdata, true)) { + pr_err("clk_ctrl() failed!\n"); + return -1; + } + msleep(10); /* Delay until clock is stable for 2 cycles */ + } + + /* Enable POWERUP signal */ + if (pdata->powerup) { + gpio_set_value(pdata->powerup, 1); + msleep(250); /* or more..? */ + } + /* Enable RSTn signal */ + if (pdata->reset) { + gpio_set_value(pdata->reset, 1); + msleep(50); /* Or more..? */ + } + return 0; +} + +static size_t cw1200_spi_align_size(struct hwbus_priv *self, size_t size) +{ + return size & 1 ? size + 1 : size; +} + +static int cw1200_spi_pm(struct hwbus_priv *self, bool suspend) +{ + return irq_set_irq_wake(self->func->irq, suspend); +} + +static const struct hwbus_ops cw1200_spi_hwbus_ops = { + .hwbus_memcpy_fromio = cw1200_spi_memcpy_fromio, + .hwbus_memcpy_toio = cw1200_spi_memcpy_toio, + .lock = cw1200_spi_lock, + .unlock = cw1200_spi_unlock, + .align_size = cw1200_spi_align_size, + .power_mgmt = cw1200_spi_pm, +}; + +/* Probe Function to be called by SPI stack when device is discovered */ +static int cw1200_spi_probe(struct spi_device *func) +{ + const struct cw1200_platform_data_spi *plat_data = + dev_get_platdata(&func->dev); + struct hwbus_priv *self; + int status; + + /* Sanity check speed */ + if (func->max_speed_hz > 52000000) + func->max_speed_hz = 52000000; + if (func->max_speed_hz < 1000000) + func->max_speed_hz = 1000000; + + /* Fix up transfer size */ + if (plat_data->spi_bits_per_word) + func->bits_per_word = plat_data->spi_bits_per_word; + if (!func->bits_per_word) + func->bits_per_word = 16; + + /* And finally.. */ + func->mode = SPI_MODE_0; + + pr_info("cw1200_wlan_spi: Probe called (CS %d M %d BPW %d CLK %d)\n", + func->chip_select, func->mode, func->bits_per_word, + func->max_speed_hz); + + if (cw1200_spi_on(plat_data)) { + pr_err("spi_on() failed!\n"); + return -1; + } + + if (spi_setup(func)) { + pr_err("spi_setup() failed!\n"); + return -1; + } + + self = devm_kzalloc(&func->dev, sizeof(*self), GFP_KERNEL); + if (!self) { + pr_err("Can't allocate SPI hwbus_priv."); + return -ENOMEM; + } + + self->pdata = plat_data; + self->func = func; + spin_lock_init(&self->lock); + + spi_set_drvdata(func, self); + + init_waitqueue_head(&self->wq); + + status = cw1200_spi_irq_subscribe(self); + + status = cw1200_core_probe(&cw1200_spi_hwbus_ops, + self, &func->dev, &self->core, + self->pdata->ref_clk, + self->pdata->macaddr, + self->pdata->sdd_file, + self->pdata->have_5ghz); + + if (status) { + cw1200_spi_irq_unsubscribe(self); + cw1200_spi_off(plat_data); + } + + return status; +} + +/* Disconnect Function to be called by SPI stack when device is disconnected */ +static void cw1200_spi_disconnect(struct spi_device *func) +{ + struct hwbus_priv *self = spi_get_drvdata(func); + + if (self) { + cw1200_spi_irq_unsubscribe(self); + if (self->core) { + cw1200_core_release(self->core); + self->core = NULL; + } + } + cw1200_spi_off(dev_get_platdata(&func->dev)); +} + +static int __maybe_unused cw1200_spi_suspend(struct device *dev) +{ + struct hwbus_priv *self = spi_get_drvdata(to_spi_device(dev)); + + if (!cw1200_can_suspend(self->core)) + return -EAGAIN; + + /* XXX notify host that we have to keep CW1200 powered on? */ + return 0; +} + +static SIMPLE_DEV_PM_OPS(cw1200_pm_ops, cw1200_spi_suspend, NULL); + +static struct spi_driver spi_driver = { + .probe = cw1200_spi_probe, + .remove = cw1200_spi_disconnect, + .driver = { + .name = "cw1200_wlan_spi", + .pm = IS_ENABLED(CONFIG_PM) ? &cw1200_pm_ops : NULL, + }, +}; + +module_spi_driver(spi_driver); -- cgit v1.2.3