From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ti/wl1251/cmd.c | 506 +++++++++++++++++++++++++++++++++++ 1 file changed, 506 insertions(+) create mode 100644 drivers/net/wireless/ti/wl1251/cmd.c (limited to 'drivers/net/wireless/ti/wl1251/cmd.c') diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c new file mode 100644 index 000000000..c3be81dc7 --- /dev/null +++ b/drivers/net/wireless/ti/wl1251/cmd.c @@ -0,0 +1,506 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "cmd.h" + +#include +#include +#include + +#include "wl1251.h" +#include "reg.h" +#include "io.h" +#include "ps.h" +#include "acx.h" + +/** + * wl1251_cmd_send - Send command to firmware + * + * @wl: wl struct + * @id: command id + * @buf: buffer containing the command, must work with dma + * @len: length of the buffer + */ +int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len) +{ + struct wl1251_cmd_header *cmd; + unsigned long timeout; + u32 intr; + int ret = 0; + + cmd = buf; + cmd->id = id; + cmd->status = 0; + + WARN_ON(len % 4 != 0); + + wl1251_mem_write(wl, wl->cmd_box_addr, buf, len); + + wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); + + timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT); + + intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) { + if (time_after(jiffies, timeout)) { + wl1251_error("command complete timeout"); + ret = -ETIMEDOUT; + goto out; + } + + msleep(1); + + intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + } + + wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK, + WL1251_ACX_INTR_CMD_COMPLETE); + +out: + return ret; +} + +/** + * wl1251_cmd_test - Send test command to firmware + * + * @wl: wl struct + * @buf: buffer containing the command, with all headers, must work with dma + * @buf_len: length of the buffer + * @answer: is answer needed + */ +int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer) +{ + int ret; + + wl1251_debug(DEBUG_CMD, "cmd test"); + + ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len); + + if (ret < 0) { + wl1251_warning("TEST command failed"); + return ret; + } + + if (answer) { + struct wl1251_command *cmd_answer; + + /* + * The test command got in, we can read the answer. + * The answer would be a wl1251_command, where the + * parameter array contains the actual answer. + */ + wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len); + + cmd_answer = buf; + + if (cmd_answer->header.status != CMD_STATUS_SUCCESS) + wl1251_error("TEST command answer error: %d", + cmd_answer->header.status); + } + + return 0; +} + +/** + * wl1251_cmd_interrogate - Read acx from firmware + * + * @wl: wl struct + * @id: acx id + * @buf: buffer for the response, including all headers, must work with dma + * @len: length of buf + */ +int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len) +{ + struct acx_header *acx = buf; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd interrogate"); + + acx->id = id; + + /* payload length, does not include any headers */ + acx->len = len - sizeof(*acx); + + ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); + if (ret < 0) { + wl1251_error("INTERROGATE command failed"); + goto out; + } + + /* the interrogate command got in, we can read the answer */ + wl1251_mem_read(wl, wl->cmd_box_addr, buf, len); + + acx = buf; + if (acx->cmd.status != CMD_STATUS_SUCCESS) + wl1251_error("INTERROGATE command error: %d", + acx->cmd.status); + +out: + return ret; +} + +/** + * wl1251_cmd_configure - Write acx value to firmware + * + * @wl: wl struct + * @id: acx id + * @buf: buffer containing acx, including all headers, must work with dma + * @len: length of buf + */ +int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len) +{ + struct acx_header *acx = buf; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd configure"); + + acx->id = id; + + /* payload length, does not include any headers */ + acx->len = len - sizeof(*acx); + + ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len); + if (ret < 0) { + wl1251_warning("CONFIGURE command NOK"); + return ret; + } + + return 0; +} + +int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity, + void *bitmap, u16 bitmap_len, u8 bitmap_control) +{ + struct wl1251_cmd_vbm_update *vbm; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd vbm"); + + vbm = kzalloc(sizeof(*vbm), GFP_KERNEL); + if (!vbm) + return -ENOMEM; + + /* Count and period will be filled by the target */ + vbm->tim.bitmap_ctrl = bitmap_control; + if (bitmap_len > PARTIAL_VBM_MAX) { + wl1251_warning("cmd vbm len is %d B, truncating to %d", + bitmap_len, PARTIAL_VBM_MAX); + bitmap_len = PARTIAL_VBM_MAX; + } + memcpy(vbm->tim.pvb_field, bitmap, bitmap_len); + vbm->tim.identity = identity; + vbm->tim.length = bitmap_len + 3; + + vbm->len = cpu_to_le16(bitmap_len + 5); + + ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm)); + if (ret < 0) { + wl1251_error("VBM command failed"); + goto out; + } + +out: + kfree(vbm); + return ret; +} + +int wl1251_cmd_data_path_rx(struct wl1251 *wl, u8 channel, bool enable) +{ + struct cmd_enabledisable_path *cmd; + int ret; + u16 cmd_rx; + + wl1251_debug(DEBUG_CMD, "cmd data path"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->channel = channel; + + if (enable) + cmd_rx = CMD_ENABLE_RX; + else + cmd_rx = CMD_DISABLE_RX; + + ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("rx %s cmd for channel %d failed", + enable ? "start" : "stop", channel); + goto out; + } + + wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d", + enable ? "start" : "stop", channel); + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_data_path_tx(struct wl1251 *wl, u8 channel, bool enable) +{ + struct cmd_enabledisable_path *cmd; + int ret; + u16 cmd_tx; + + wl1251_debug(DEBUG_CMD, "cmd data path"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->channel = channel; + + if (enable) + cmd_tx = CMD_ENABLE_TX; + else + cmd_tx = CMD_DISABLE_TX; + + ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); + if (ret < 0) + wl1251_error("tx %s cmd for channel %d failed", + enable ? "start" : "stop", channel); + else + wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d", + enable ? "start" : "stop", channel); + + kfree(cmd); + return ret; +} + +int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel, + u16 beacon_interval, u8 dtim_interval) +{ + struct cmd_join *join; + int ret, i; + u8 *bssid; + + join = kzalloc(sizeof(*join), GFP_KERNEL); + if (!join) + return -ENOMEM; + + wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d", + bss_type == BSS_TYPE_IBSS ? " ibss" : "", + channel, beacon_interval, dtim_interval); + + /* Reverse order BSSID */ + bssid = (u8 *) &join->bssid_lsb; + for (i = 0; i < ETH_ALEN; i++) + bssid[i] = wl->bssid[ETH_ALEN - i - 1]; + + join->rx_config_options = wl->rx_config; + join->rx_filter_options = wl->rx_filter; + + join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | + RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; + + join->beacon_interval = beacon_interval; + join->dtim_interval = dtim_interval; + join->bss_type = bss_type; + join->channel = channel; + join->ctrl = JOIN_CMD_CTRL_TX_FLUSH; + + ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); + if (ret < 0) { + wl1251_error("failed to initiate cmd join"); + goto out; + } + +out: + kfree(join); + return ret; +} + +int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode) +{ + struct wl1251_cmd_ps_params *ps_params = NULL; + int ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd set ps mode"); + + ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); + if (!ps_params) + return -ENOMEM; + + ps_params->ps_mode = ps_mode; + ps_params->send_null_data = 1; + ps_params->retries = 5; + ps_params->hang_over_period = 128; + ps_params->null_data_rate = 1; /* 1 Mbps */ + + ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params, + sizeof(*ps_params)); + if (ret < 0) { + wl1251_error("cmd set_ps_mode failed"); + goto out; + } + +out: + kfree(ps_params); + return ret; +} + +int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer, + size_t len) +{ + struct cmd_read_write_memory *cmd; + int ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd read memory"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + WARN_ON(len > MAX_READ_SIZE); + len = min_t(size_t, len, MAX_READ_SIZE); + + cmd->addr = addr; + cmd->size = len; + + ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("read memory command failed: %d", ret); + goto out; + } + + /* the read command got in, we can now read the answer */ + wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); + + if (cmd->header.status != CMD_STATUS_SUCCESS) + wl1251_error("error in read command result: %d", + cmd->header.status); + + memcpy(answer, cmd->value, len); + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id, + void *buf, size_t buf_len) +{ + struct wl1251_cmd_packet_template *cmd; + size_t cmd_len; + int ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id); + + WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE); + buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE); + cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4); + + cmd = kzalloc(cmd_len, GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->size = cpu_to_le16(buf_len); + + if (buf) + memcpy(cmd->data, buf, buf_len); + + ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len); + if (ret < 0) { + wl1251_warning("cmd set_template failed: %d", ret); + goto out; + } + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, + struct ieee80211_channel *channels[], + unsigned int n_channels, unsigned int n_probes) +{ + struct wl1251_cmd_scan *cmd; + int i, ret = 0; + + wl1251_debug(DEBUG_CMD, "cmd scan channels %d", n_channels); + + WARN_ON(n_channels > SCAN_MAX_NUM_OF_CHANNELS); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); + cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN | + CFG_RX_MGMT_EN | + CFG_RX_BCN_EN); + cmd->params.scan_options = 0; + /* + * Use high priority scan when not associated to prevent fw issue + * causing never-ending scans (sometimes 20+ minutes). + * Note: This bug may be caused by the fw's DTIM handling. + */ + if (is_zero_ether_addr(wl->bssid)) + cmd->params.scan_options |= cpu_to_le16(WL1251_SCAN_OPT_PRIORITY_HIGH); + cmd->params.num_channels = n_channels; + cmd->params.num_probe_requests = n_probes; + cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */ + cmd->params.tid_trigger = 0; + + for (i = 0; i < n_channels; i++) { + cmd->channels[i].min_duration = + cpu_to_le32(WL1251_SCAN_MIN_DURATION); + cmd->channels[i].max_duration = + cpu_to_le32(WL1251_SCAN_MAX_DURATION); + memset(&cmd->channels[i].bssid_lsb, 0xff, 4); + memset(&cmd->channels[i].bssid_msb, 0xff, 2); + cmd->channels[i].early_termination = 0; + cmd->channels[i].tx_power_att = 0; + cmd->channels[i].channel = channels[i]->hw_value; + } + + if (ssid) { + int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN); + + cmd->params.ssid_len = len; + memcpy(cmd->params.ssid, ssid, len); + } + + ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("cmd scan failed: %d", ret); + goto out; + } + + wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); + + if (cmd->header.status != CMD_STATUS_SUCCESS) { + wl1251_error("cmd scan status wasn't success: %d", + cmd->header.status); + ret = -EIO; + goto out; + } + +out: + kfree(cmd); + return ret; +} + +int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout) +{ + struct wl1251_cmd_trigger_scan_to *cmd; + int ret; + + wl1251_debug(DEBUG_CMD, "cmd trigger scan to"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->timeout = timeout; + + ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd)); + if (ret < 0) { + wl1251_error("cmd trigger scan to failed: %d", ret); + goto out; + } + +out: + kfree(cmd); + return ret; +} -- cgit v1.2.3