From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ti/wl12xx/cmd.c | 309 +++++++++++++++++++++++++++++++++++ 1 file changed, 309 insertions(+) create mode 100644 drivers/net/wireless/ti/wl12xx/cmd.c (limited to 'drivers/net/wireless/ti/wl12xx/cmd.c') diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c new file mode 100644 index 000000000..17434b3bb --- /dev/null +++ b/drivers/net/wireless/ti/wl12xx/cmd.c @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file is part of wl12xx + * + * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" + +#include "wl12xx.h" +#include "cmd.h" + +int wl1271_cmd_ext_radio_parms(struct wl1271 *wl) +{ + struct wl1271_ext_radio_parms_cmd *ext_radio_parms; + struct wl12xx_priv *priv = wl->priv; + struct wl12xx_conf_rf *rf = &priv->conf.rf; + int ret; + + if (!wl->nvs) + return -ENODEV; + + ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL); + if (!ext_radio_parms) + return -ENOMEM; + + ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM; + + memcpy(ext_radio_parms->tx_per_channel_power_compensation_2, + rf->tx_per_channel_power_compensation_2, + CONF_TX_PWR_COMPENSATION_LEN_2); + memcpy(ext_radio_parms->tx_per_channel_power_compensation_5, + rf->tx_per_channel_power_compensation_5, + CONF_TX_PWR_COMPENSATION_LEN_5); + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ", + ext_radio_parms, sizeof(*ext_radio_parms)); + + ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0); + if (ret < 0) + wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed"); + + kfree(ext_radio_parms); + return ret; +} + +int wl1271_cmd_general_parms(struct wl1271 *wl) +{ + struct wl1271_general_parms_cmd *gen_parms; + struct wl1271_ini_general_params *gp = + &((struct wl1271_nvs_file *)wl->nvs)->general_params; + struct wl12xx_priv *priv = wl->priv; + bool answer = false; + int ret; + + if (!wl->nvs) + return -ENODEV; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from INI out of bounds"); + return -EINVAL; + } + + gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); + if (!gen_parms) + return -ENOMEM; + + gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; + + memcpy(&gen_parms->general_params, gp, sizeof(*gp)); + + /* If we started in PLT FEM_DETECT mode, force auto detect */ + if (wl->plt_mode == PLT_FEM_DETECT) + gen_parms->general_params.tx_bip_fem_auto_detect = true; + + if (gen_parms->general_params.tx_bip_fem_auto_detect) + answer = true; + + /* Override the REF CLK from the NVS with the one from platform data */ + gen_parms->general_params.ref_clock = priv->ref_clock; + + ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); + if (ret < 0) { + wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); + goto out; + } + + gp->tx_bip_fem_manufacturer = + gen_parms->general_params.tx_bip_fem_manufacturer; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from FW out of bounds"); + ret = -EINVAL; + goto out; + } + + /* If we are in calibrator based fem auto detect - save fem nr */ + if (wl->plt_mode == PLT_FEM_DETECT) + wl->fem_manuf = gp->tx_bip_fem_manufacturer; + + wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", + answer == false ? + "manual" : + wl->plt_mode == PLT_FEM_DETECT ? + "calibrator_fem_detect" : + "auto", + gp->tx_bip_fem_manufacturer); + +out: + kfree(gen_parms); + return ret; +} + +int wl128x_cmd_general_parms(struct wl1271 *wl) +{ + struct wl128x_general_parms_cmd *gen_parms; + struct wl128x_ini_general_params *gp = + &((struct wl128x_nvs_file *)wl->nvs)->general_params; + struct wl12xx_priv *priv = wl->priv; + bool answer = false; + int ret; + + if (!wl->nvs) + return -ENODEV; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from ini out of bounds"); + return -EINVAL; + } + + gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL); + if (!gen_parms) + return -ENOMEM; + + gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM; + + memcpy(&gen_parms->general_params, gp, sizeof(*gp)); + + /* If we started in PLT FEM_DETECT mode, force auto detect */ + if (wl->plt_mode == PLT_FEM_DETECT) + gen_parms->general_params.tx_bip_fem_auto_detect = true; + + if (gen_parms->general_params.tx_bip_fem_auto_detect) + answer = true; + + /* Replace REF and TCXO CLKs with the ones from platform data */ + gen_parms->general_params.ref_clock = priv->ref_clock; + gen_parms->general_params.tcxo_ref_clock = priv->tcxo_clock; + + ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer); + if (ret < 0) { + wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed"); + goto out; + } + + gp->tx_bip_fem_manufacturer = + gen_parms->general_params.tx_bip_fem_manufacturer; + + if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) { + wl1271_warning("FEM index from FW out of bounds"); + ret = -EINVAL; + goto out; + } + + /* If we are in calibrator based fem auto detect - save fem nr */ + if (wl->plt_mode == PLT_FEM_DETECT) + wl->fem_manuf = gp->tx_bip_fem_manufacturer; + + wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n", + answer == false ? + "manual" : + wl->plt_mode == PLT_FEM_DETECT ? + "calibrator_fem_detect" : + "auto", + gp->tx_bip_fem_manufacturer); + +out: + kfree(gen_parms); + return ret; +} + +int wl1271_cmd_radio_parms(struct wl1271 *wl) +{ + struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs; + struct wl1271_radio_parms_cmd *radio_parms; + struct wl1271_ini_general_params *gp = &nvs->general_params; + int ret, fem_idx; + + if (!wl->nvs) + return -ENODEV; + + radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); + if (!radio_parms) + return -ENOMEM; + + radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; + + fem_idx = WL12XX_FEM_TO_NVS_ENTRY(gp->tx_bip_fem_manufacturer); + + /* 2.4GHz parameters */ + memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2, + sizeof(struct wl1271_ini_band_params_2)); + memcpy(&radio_parms->dyn_params_2, + &nvs->dyn_radio_params_2[fem_idx].params, + sizeof(struct wl1271_ini_fem_params_2)); + + /* 5GHz parameters */ + memcpy(&radio_parms->static_params_5, + &nvs->stat_radio_params_5, + sizeof(struct wl1271_ini_band_params_5)); + memcpy(&radio_parms->dyn_params_5, + &nvs->dyn_radio_params_5[fem_idx].params, + sizeof(struct wl1271_ini_fem_params_5)); + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", + radio_parms, sizeof(*radio_parms)); + + ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); + if (ret < 0) + wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); + + kfree(radio_parms); + return ret; +} + +int wl128x_cmd_radio_parms(struct wl1271 *wl) +{ + struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs; + struct wl128x_radio_parms_cmd *radio_parms; + struct wl128x_ini_general_params *gp = &nvs->general_params; + int ret, fem_idx; + + if (!wl->nvs) + return -ENODEV; + + radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL); + if (!radio_parms) + return -ENOMEM; + + radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM; + + fem_idx = WL12XX_FEM_TO_NVS_ENTRY(gp->tx_bip_fem_manufacturer); + + /* 2.4GHz parameters */ + memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2, + sizeof(struct wl128x_ini_band_params_2)); + memcpy(&radio_parms->dyn_params_2, + &nvs->dyn_radio_params_2[fem_idx].params, + sizeof(struct wl128x_ini_fem_params_2)); + + /* 5GHz parameters */ + memcpy(&radio_parms->static_params_5, + &nvs->stat_radio_params_5, + sizeof(struct wl128x_ini_band_params_5)); + memcpy(&radio_parms->dyn_params_5, + &nvs->dyn_radio_params_5[fem_idx].params, + sizeof(struct wl128x_ini_fem_params_5)); + + radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options; + + wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ", + radio_parms, sizeof(*radio_parms)); + + ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0); + if (ret < 0) + wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed"); + + kfree(radio_parms); + return ret; +} + +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch) +{ + struct wl12xx_cmd_channel_switch *cmd; + int ret; + + wl1271_debug(DEBUG_ACX, "cmd channel switch"); + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + ret = -ENOMEM; + goto out; + } + + cmd->role_id = wlvif->role_id; + cmd->channel = ch_switch->chandef.chan->hw_value; + cmd->switch_time = ch_switch->count; + cmd->stop_tx = ch_switch->block_tx; + + /* FIXME: control from mac80211 in the future */ + /* Enable TX on the target channel */ + cmd->post_switch_tx_disable = 0; + + ret = wl1271_cmd_send(wl, CMD_CHANNEL_SWITCH, cmd, sizeof(*cmd), 0); + if (ret < 0) { + wl1271_error("failed to send channel switch command"); + goto out_free; + } + +out_free: + kfree(cmd); + +out: + return ret; +} -- cgit v1.2.3