From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ti/wl18xx/conf.h | 218 ++++++++++++++++++++++++++++++++++ 1 file changed, 218 insertions(+) create mode 100644 drivers/net/wireless/ti/wl18xx/conf.h (limited to 'drivers/net/wireless/ti/wl18xx/conf.h') diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h new file mode 100644 index 000000000..9621bc247 --- /dev/null +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -0,0 +1,218 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + */ + +#ifndef __WL18XX_CONF_H__ +#define __WL18XX_CONF_H__ + +#define WL18XX_CONF_MAGIC 0x10e100ca +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0007) +#define WL18XX_CONF_MASK 0x0000ffff +#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ + sizeof(struct wl18xx_priv_conf)) + +#define NUM_OF_CHANNELS_11_ABG 150 +#define NUM_OF_CHANNELS_11_P 7 +#define SRF_TABLE_LEN 16 +#define PIN_MUXING_SIZE 2 +#define WL18XX_TRACE_LOSS_GAPS_TX 10 +#define WL18XX_TRACE_LOSS_GAPS_RX 18 + +struct wl18xx_mac_and_phy_params { + u8 phy_standalone; + u8 spare0; + u8 enable_clpc; + u8 enable_tx_low_pwr_on_siso_rdl; + u8 auto_detect; + u8 dedicated_fem; + + u8 low_band_component; + + /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ + u8 low_band_component_type; + + u8 high_band_component; + + /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ + u8 high_band_component_type; + u8 number_of_assembled_ant2_4; + u8 number_of_assembled_ant5; + u8 pin_muxing_platform_options[PIN_MUXING_SIZE]; + u8 external_pa_dc2dc; + u8 tcxo_ldo_voltage; + u8 xtal_itrim_val; + u8 srf_state; + u8 srf1[SRF_TABLE_LEN]; + u8 srf2[SRF_TABLE_LEN]; + u8 srf3[SRF_TABLE_LEN]; + u8 io_configuration; + u8 sdio_configuration; + u8 settings; + u8 rx_profile; + u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG]; + u8 pwr_limit_reference_11_abg; + u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; + u8 pwr_limit_reference_11p; + u8 spare1; + u8 per_chan_bo_mode_11_abg[13]; + u8 per_chan_bo_mode_11_p[4]; + u8 primary_clock_setting_time; + u8 clock_valid_on_wake_up; + u8 secondary_clock_setting_time; + u8 board_type; + /* enable point saturation */ + u8 psat; + /* low/medium/high Tx power in dBm for STA-HP BG */ + s8 low_power_val; + s8 med_power_val; + s8 high_power_val; + s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; + s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; + u8 tx_rf_margin; + /* low/medium/high Tx power in dBm for other role */ + s8 low_power_val_2nd; + s8 med_power_val_2nd; + s8 high_power_val_2nd; + + u8 padding[1]; +} __packed; + +enum wl18xx_ht_mode { + /* Default - use MIMO, fallback to SISO20 */ + HT_MODE_DEFAULT = 0, + + /* Wide - use SISO40 */ + HT_MODE_WIDE = 1, + + /* Use SISO20 */ + HT_MODE_SISO20 = 2, +}; + +struct wl18xx_ht_settings { + /* DEFAULT / WIDE / SISO20 */ + u8 mode; +} __packed; + +struct conf_ap_sleep_settings { + /* Duty Cycle (20-80% of staying Awake) for IDLE AP + * (0: disable) + */ + u8 idle_duty_cycle; + /* Duty Cycle (20-80% of staying Awake) for Connected AP + * (0: disable) + */ + u8 connected_duty_cycle; + /* Maximum stations that are allowed to be connected to AP + * (255: no limit) + */ + u8 max_stations_thresh; + /* Timeout till enabling the Sleep Mechanism after data stops + * [unit: 100 msec] + */ + u8 idle_conn_thresh; +} __packed; + +struct wl18xx_priv_conf { + /* Module params structures */ + struct wl18xx_ht_settings ht; + + /* this structure is copied wholesale to FW */ + struct wl18xx_mac_and_phy_params phy; + + struct conf_ap_sleep_settings ap_sleep; +} __packed; + +enum wl18xx_sg_params { + WL18XX_CONF_SG_PARAM_0 = 0, + + /* Configuration Parameters */ + WL18XX_CONF_SG_ANTENNA_CONFIGURATION, + WL18XX_CONF_SG_ZIGBEE_COEX, + WL18XX_CONF_SG_TIME_SYNC, + + WL18XX_CONF_SG_PARAM_4, + WL18XX_CONF_SG_PARAM_5, + WL18XX_CONF_SG_PARAM_6, + WL18XX_CONF_SG_PARAM_7, + WL18XX_CONF_SG_PARAM_8, + WL18XX_CONF_SG_PARAM_9, + WL18XX_CONF_SG_PARAM_10, + WL18XX_CONF_SG_PARAM_11, + WL18XX_CONF_SG_PARAM_12, + WL18XX_CONF_SG_PARAM_13, + WL18XX_CONF_SG_PARAM_14, + WL18XX_CONF_SG_PARAM_15, + WL18XX_CONF_SG_PARAM_16, + WL18XX_CONF_SG_PARAM_17, + WL18XX_CONF_SG_PARAM_18, + WL18XX_CONF_SG_PARAM_19, + WL18XX_CONF_SG_PARAM_20, + WL18XX_CONF_SG_PARAM_21, + WL18XX_CONF_SG_PARAM_22, + WL18XX_CONF_SG_PARAM_23, + WL18XX_CONF_SG_PARAM_24, + WL18XX_CONF_SG_PARAM_25, + + /* Active Scan Parameters */ + WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ, + WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, + + WL18XX_CONF_SG_PARAM_28, + + /* Passive Scan Parameters */ + WL18XX_CONF_SG_PARAM_29, + WL18XX_CONF_SG_PARAM_30, + WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, + + /* Passive Scan in Dual Antenna Parameters */ + WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN, + WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN, + WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN, + + /* General Parameters */ + WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO, + WL18XX_CONF_SG_PARAM_36, + WL18XX_CONF_SG_BEACON_MISS_PERCENT, + WL18XX_CONF_SG_PARAM_38, + WL18XX_CONF_SG_RXT, + WL18XX_CONF_SG_UNUSED, + WL18XX_CONF_SG_ADAPTIVE_RXT_TXT, + WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP, + WL18XX_CONF_SG_HV3_MAX_SERVED, + WL18XX_CONF_SG_PARAM_44, + WL18XX_CONF_SG_PARAM_45, + WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD, + WL18XX_CONF_SG_GEMINI_PARAM_47, + WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME, + + /* AP Parameters */ + WL18XX_CONF_SG_AP_BEACON_MISS_TX, + WL18XX_CONF_SG_PARAM_50, + WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL, + WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME, + WL18XX_CONF_SG_PARAM_53, + WL18XX_CONF_SG_PARAM_54, + + /* CTS Diluting Parameters */ + WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH, + WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER, + + WL18XX_CONF_SG_TEMP_PARAM_1, + WL18XX_CONF_SG_TEMP_PARAM_2, + WL18XX_CONF_SG_TEMP_PARAM_3, + WL18XX_CONF_SG_TEMP_PARAM_4, + WL18XX_CONF_SG_TEMP_PARAM_5, + WL18XX_CONF_SG_TEMP_PARAM_6, + WL18XX_CONF_SG_TEMP_PARAM_7, + WL18XX_CONF_SG_TEMP_PARAM_8, + WL18XX_CONF_SG_TEMP_PARAM_9, + WL18XX_CONF_SG_TEMP_PARAM_10, + + WL18XX_CONF_SG_PARAMS_MAX, + WL18XX_CONF_SG_PARAMS_ALL = 0xff +}; + +#endif /* __WL18XX_CONF_H__ */ -- cgit v1.2.3