From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/net/wireless/ti/wlcore/cmd.h | 712 +++++++++++++++++++++++++++++++++++ 1 file changed, 712 insertions(+) create mode 100644 drivers/net/wireless/ti/wlcore/cmd.h (limited to 'drivers/net/wireless/ti/wlcore/cmd.h') diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h new file mode 100644 index 000000000..f2609d5b6 --- /dev/null +++ b/drivers/net/wireless/ti/wlcore/cmd.h @@ -0,0 +1,712 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This file is part of wl1271 + * + * Copyright (C) 1998-2009 Texas Instruments. All rights reserved. + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho + */ + +#ifndef __CMD_H__ +#define __CMD_H__ + +#include "wlcore.h" + +struct acx_header; + +int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len); +int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type, + u8 *role_id); +int wl12xx_cmd_role_disable(struct wl1271 *wl, u8 *role_id); +int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_cmd_role_stop_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_cmd_role_start_ibss(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif, + enum nl80211_band band, int channel); +int wl12xx_stop_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer); +int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, + size_t cmd_len, size_t res_len); +int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len); +int wlcore_cmd_configure_failsafe(struct wl1271 *wl, u16 id, void *buf, + size_t len, unsigned long valid_rets); +int wl1271_cmd_data_path(struct wl1271 *wl, bool enable); +int wl1271_cmd_ps_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 ps_mode, u16 auto_ps_timeout); +int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer, + size_t len); +int wl1271_cmd_template_set(struct wl1271 *wl, u8 role_id, + u16 template_id, void *buf, size_t buf_len, + int index, u32 rates); +int wl12xx_cmd_build_null_data(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl1271_cmd_build_ps_poll(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u16 aid); +int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 role_id, u8 band, + const u8 *ssid, size_t ssid_len, + const u8 *ie, size_t ie_len, const u8 *common_ie, + size_t common_ie_len, bool sched_scan); +struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct sk_buff *skb); +int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, struct wl12xx_vif *wlvif); +int wl1271_build_qos_null_data(struct wl1271 *wl, struct ieee80211_vif *vif); +int wl12xx_cmd_build_klv_null_data(struct wl1271 *wl, + struct wl12xx_vif *wlvif); +int wl12xx_cmd_set_default_wep_key(struct wl1271 *wl, u8 id, u8 hlid); +int wl1271_cmd_set_sta_key(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u16 action, u8 id, u8 key_type, + u8 key_size, const u8 *key, const u8 *addr, + u32 tx_seq_32, u16 tx_seq_16); +int wl1271_cmd_set_ap_key(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u16 action, u8 id, u8 key_type, + u8 key_size, const u8 *key, u8 hlid, u32 tx_seq_32, + u16 tx_seq_16, bool is_pairwise); +int wl12xx_cmd_set_peer_state(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 hlid); +int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id, + enum nl80211_band band, u8 channel); +int wl12xx_croc(struct wl1271 *wl, u8 role_id); +int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct ieee80211_sta *sta, u8 hlid); +int wl12xx_cmd_remove_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 hlid); +void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel, + enum nl80211_band band); +int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl); +int wlcore_cmd_generic_cfg(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 feature, u8 enable, u8 value); +int wl12xx_cmd_config_fwlog(struct wl1271 *wl); +int wl12xx_cmd_start_fwlog(struct wl1271 *wl); +int wl12xx_cmd_stop_fwlog(struct wl1271 *wl); +int wl12xx_cmd_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif, + struct ieee80211_channel_switch *ch_switch); +int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, + struct wl12xx_vif *wlvif); +int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, + u8 *hlid); +void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid); +int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl, + u32 mask, bool *timeout); +u8 wlcore_get_native_channel_type(u8 nl_channel_type); + +enum wl1271_commands { + CMD_INTERROGATE = 1, /* use this to read information elements */ + CMD_CONFIGURE = 2, /* use this to write information elements */ + CMD_ENABLE_RX = 3, + CMD_ENABLE_TX = 4, + CMD_DISABLE_RX = 5, + CMD_DISABLE_TX = 6, + CMD_SCAN = 7, + CMD_STOP_SCAN = 8, + CMD_SET_KEYS = 9, + CMD_READ_MEMORY = 10, + CMD_WRITE_MEMORY = 11, + CMD_SET_TEMPLATE = 12, + CMD_TEST = 13, + CMD_NOISE_HIST = 14, + CMD_QUIET_ELEMENT_SET_STATE = 15, + CMD_SET_BCN_MODE = 16, + + CMD_MEASUREMENT = 17, + CMD_STOP_MEASUREMENT = 18, + CMD_SET_PS_MODE = 19, + CMD_CHANNEL_SWITCH = 20, + CMD_STOP_CHANNEL_SWICTH = 21, + CMD_AP_DISCOVERY = 22, + CMD_STOP_AP_DISCOVERY = 23, + CMD_HEALTH_CHECK = 24, + CMD_DEBUG = 25, + CMD_TRIGGER_SCAN_TO = 26, + CMD_CONNECTION_SCAN_CFG = 27, + CMD_CONNECTION_SCAN_SSID_CFG = 28, + CMD_START_PERIODIC_SCAN = 29, + CMD_STOP_PERIODIC_SCAN = 30, + CMD_SET_PEER_STATE = 31, + CMD_REMAIN_ON_CHANNEL = 32, + CMD_CANCEL_REMAIN_ON_CHANNEL = 33, + CMD_CONFIG_FWLOGGER = 34, + CMD_START_FWLOGGER = 35, + CMD_STOP_FWLOGGER = 36, + + /* Access point commands */ + CMD_ADD_PEER = 37, + CMD_REMOVE_PEER = 38, + + /* Role API */ + CMD_ROLE_ENABLE = 39, + CMD_ROLE_DISABLE = 40, + CMD_ROLE_START = 41, + CMD_ROLE_STOP = 42, + + /* DFS */ + CMD_START_RADAR_DETECTION = 43, + CMD_STOP_RADAR_DETECTION = 44, + + /* WIFI Direct */ + CMD_WFD_START_DISCOVERY = 45, + CMD_WFD_STOP_DISCOVERY = 46, + CMD_WFD_ATTRIBUTE_CONFIG = 47, + CMD_GENERIC_CFG = 48, + CMD_NOP = 49, + + /* start of 18xx specific commands */ + CMD_DFS_CHANNEL_CONFIG = 60, + CMD_SMART_CONFIG_START = 61, + CMD_SMART_CONFIG_STOP = 62, + CMD_SMART_CONFIG_SET_GROUP_KEY = 63, + + CMD_CAC_START = 64, + CMD_CAC_STOP = 65, + CMD_DFS_MASTER_RESTART = 66, + CMD_DFS_RADAR_DETECTION_DEBUG = 67, + + MAX_COMMAND_ID = 0xFFFF, +}; + +#define MAX_CMD_PARAMS 572 + +enum cmd_templ { + CMD_TEMPL_NULL_DATA = 0, + CMD_TEMPL_BEACON, + CMD_TEMPL_CFG_PROBE_REQ_2_4, + CMD_TEMPL_CFG_PROBE_REQ_5, + CMD_TEMPL_PROBE_RESPONSE, + CMD_TEMPL_QOS_NULL_DATA, + CMD_TEMPL_PS_POLL, + CMD_TEMPL_KLV, + CMD_TEMPL_DISCONNECT, + CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY, + CMD_TEMPL_APP_PROBE_REQ_5_LEGACY, + CMD_TEMPL_BAR, /* for firmware internal use only */ + CMD_TEMPL_CTS, /* + * For CTS-to-self (FastCTS) mechanism + * for BT/WLAN coexistence (SoftGemini). */ + CMD_TEMPL_AP_BEACON, + CMD_TEMPL_AP_PROBE_RESPONSE, + CMD_TEMPL_ARP_RSP, + CMD_TEMPL_DEAUTH_AP, + CMD_TEMPL_TEMPORARY, + CMD_TEMPL_LINK_MEASUREMENT_REPORT, + CMD_TEMPL_PROBE_REQ_2_4_PERIODIC, + CMD_TEMPL_PROBE_REQ_5_PERIODIC, + + CMD_TEMPL_MAX = 0xff +}; + +/* unit ms */ +#define WL1271_COMMAND_TIMEOUT 2000 +#define WL1271_CMD_TEMPL_DFLT_SIZE 252 +#define WL1271_CMD_TEMPL_MAX_SIZE 512 +#define WL1271_EVENT_TIMEOUT 5000 + +struct wl1271_cmd_header { + __le16 id; + __le16 status; + /* payload */ + u8 data[]; +} __packed; + +#define WL1271_CMD_MAX_PARAMS 572 + +struct wl1271_command { + struct wl1271_cmd_header header; + u8 parameters[WL1271_CMD_MAX_PARAMS]; +} __packed; + +enum { + CMD_MAILBOX_IDLE = 0, + CMD_STATUS_SUCCESS = 1, + CMD_STATUS_UNKNOWN_CMD = 2, + CMD_STATUS_UNKNOWN_IE = 3, + CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11, + CMD_STATUS_RX_BUSY = 13, + CMD_STATUS_INVALID_PARAM = 14, + CMD_STATUS_TEMPLATE_TOO_LARGE = 15, + CMD_STATUS_OUT_OF_MEMORY = 16, + CMD_STATUS_STA_TABLE_FULL = 17, + CMD_STATUS_RADIO_ERROR = 18, + CMD_STATUS_WRONG_NESTING = 19, + CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/ + CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/ + CMD_STATUS_TEMPLATE_OOM = 23, + CMD_STATUS_NO_RX_BA_SESSION = 24, + + MAX_COMMAND_STATUS +}; + +#define CMDMBOX_HEADER_LEN 4 +#define CMDMBOX_INFO_ELEM_HEADER_LEN 4 + +enum { + BSS_TYPE_IBSS = 0, + BSS_TYPE_STA_BSS = 2, + BSS_TYPE_AP_BSS = 3, + MAX_BSS_TYPE = 0xFF +}; + +#define WL1271_JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */ +#define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1 +#define WL1271_JOIN_CMD_BSS_TYPE_5GHZ 0x10 + +struct wl12xx_cmd_role_enable { + struct wl1271_cmd_header header; + + u8 role_id; + u8 role_type; + u8 mac_address[ETH_ALEN]; +} __packed; + +struct wl12xx_cmd_role_disable { + struct wl1271_cmd_header header; + + u8 role_id; + u8 padding[3]; +} __packed; + +enum wlcore_band { + WLCORE_BAND_2_4GHZ = 0, + WLCORE_BAND_5GHZ = 1, + WLCORE_BAND_JAPAN_4_9_GHZ = 2, + WLCORE_BAND_DEFAULT = WLCORE_BAND_2_4GHZ, + WLCORE_BAND_INVALID = 0x7E, + WLCORE_BAND_MAX_RADIO = 0x7F, +}; + +enum wlcore_channel_type { + WLCORE_CHAN_NO_HT, + WLCORE_CHAN_HT20, + WLCORE_CHAN_HT40MINUS, + WLCORE_CHAN_HT40PLUS +}; + +struct wl12xx_cmd_role_start { + struct wl1271_cmd_header header; + + u8 role_id; + u8 band; + u8 channel; + + /* enum wlcore_channel_type */ + u8 channel_type; + + union { + struct { + u8 hlid; + u8 session; + u8 padding_1[54]; + } __packed device; + /* sta & p2p_cli use the same struct */ + struct { + u8 bssid[ETH_ALEN]; + u8 hlid; /* data hlid */ + u8 session; + __le32 remote_rates; /* remote supported rates */ + + /* + * The target uses this field to determine the rate at + * which to transmit control frame responses (such as + * ACK or CTS frames). + */ + __le32 basic_rate_set; + __le32 local_rates; /* local supported rates */ + + u8 ssid_type; + u8 ssid_len; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + + __le16 beacon_interval; /* in TBTTs */ + } __packed sta; + struct { + u8 bssid[ETH_ALEN]; + u8 hlid; /* data hlid */ + u8 dtim_interval; + __le32 remote_rates; /* remote supported rates */ + + __le32 basic_rate_set; + __le32 local_rates; /* local supported rates */ + + u8 ssid_type; + u8 ssid_len; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + + __le16 beacon_interval; /* in TBTTs */ + + u8 padding_1[4]; + } __packed ibss; + /* ap & p2p_go use the same struct */ + struct { + __le16 aging_period; /* in secs */ + u8 beacon_expiry; /* in ms */ + u8 bss_index; + /* The host link id for the AP's global queue */ + u8 global_hlid; + /* The host link id for the AP's broadcast queue */ + u8 broadcast_hlid; + + __le16 beacon_interval; /* in TBTTs */ + + __le32 basic_rate_set; + __le32 local_rates; /* local supported rates */ + + u8 dtim_interval; + + u8 ssid_type; + u8 ssid_len; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + + u8 reset_tsf; + + /* + * ap supports wmm (note that there is additional + * per-sta wmm configuration) + */ + u8 wmm; + + u8 bcast_session_id; + u8 global_session_id; + u8 padding_1[1]; + } __packed ap; + }; +} __packed; + +struct wl12xx_cmd_role_stop { + struct wl1271_cmd_header header; + + u8 role_id; + u8 disc_type; /* only STA and P2P_CLI */ + __le16 reason; /* only STA and P2P_CLI */ +} __packed; + +struct cmd_enabledisable_path { + struct wl1271_cmd_header header; + + u8 channel; + u8 padding[3]; +} __packed; + +#define WL1271_RATE_AUTOMATIC 0 + +struct wl1271_cmd_template_set { + struct wl1271_cmd_header header; + + u8 role_id; + u8 template_type; + __le16 len; + u8 index; /* relevant only for KLV_TEMPLATE type */ + u8 padding[3]; + + __le32 enabled_rates; + u8 short_retry_limit; + u8 long_retry_limit; + u8 aflags; + u8 reserved; + + u8 template_data[WL1271_CMD_TEMPL_MAX_SIZE]; +} __packed; + +#define TIM_ELE_ID 5 +#define PARTIAL_VBM_MAX 251 + +struct wl1271_tim { + u8 identity; + u8 length; + u8 dtim_count; + u8 dtim_period; + u8 bitmap_ctrl; + u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */ +} __packed; + +enum wl1271_cmd_ps_mode { + STATION_AUTO_PS_MODE, /* Dynamic Power Save */ + STATION_ACTIVE_MODE, + STATION_POWER_SAVE_MODE +}; + +struct wl1271_cmd_ps_params { + struct wl1271_cmd_header header; + + u8 role_id; + u8 ps_mode; /* STATION_* */ + u16 auto_ps_timeout; +} __packed; + +/* HW encryption keys */ +#define NUM_ACCESS_CATEGORIES_COPY 4 + +enum wl1271_cmd_key_action { + KEY_ADD_OR_REPLACE = 1, + KEY_REMOVE = 2, + KEY_SET_ID = 3, + MAX_KEY_ACTION = 0xffff, +}; + +enum wl1271_cmd_lid_key_type { + UNICAST_LID_TYPE = 0, + BROADCAST_LID_TYPE = 1, + WEP_DEFAULT_LID_TYPE = 2 +}; + +enum wl1271_cmd_key_type { + KEY_NONE = 0, + KEY_WEP = 1, + KEY_TKIP = 2, + KEY_AES = 3, + KEY_GEM = 4, +}; + +struct wl1271_cmd_set_keys { + struct wl1271_cmd_header header; + + /* + * Indicates whether the HLID is a unicast key set + * or broadcast key set. A special value 0xFF is + * used to indicate that the HLID is on WEP-default + * (multi-hlids). of type wl1271_cmd_lid_key_type. + */ + u8 hlid; + + /* + * In WEP-default network (hlid == 0xFF) used to + * indicate which network STA/IBSS/AP role should be + * changed + */ + u8 lid_key_type; + + /* + * Key ID - For TKIP and AES key types, this field + * indicates the value that should be inserted into + * the KeyID field of frames transmitted using this + * key entry. For broadcast keys the index use as a + * marker for TX/RX key. + * For WEP default network (HLID=0xFF), this field + * indicates the ID of the key to add or remove. + */ + u8 key_id; + u8 reserved_1; + + /* key_action_e */ + __le16 key_action; + + /* key size in bytes */ + u8 key_size; + + /* key_type_e */ + u8 key_type; + + /* This field holds the security key data to add to the STA table */ + u8 key[MAX_KEY_SIZE]; + __le16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY]; + __le32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY]; +} __packed; + +struct wl1271_cmd_test_header { + u8 id; + u8 padding[3]; +} __packed; + +enum wl1271_channel_tune_bands { + WL1271_CHANNEL_TUNE_BAND_2_4, + WL1271_CHANNEL_TUNE_BAND_5, + WL1271_CHANNEL_TUNE_BAND_4_9 +}; + +#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0 + +/* + * There are three types of disconnections: + * + * DISCONNECT_IMMEDIATE: the fw doesn't send any frames + * DISCONNECT_DEAUTH: the fw generates a DEAUTH request with the reason + * we have passed + * DISCONNECT_DISASSOC: the fw generates a DESASSOC request with the reason + * we have passed + */ +enum wl1271_disconnect_type { + DISCONNECT_IMMEDIATE, + DISCONNECT_DEAUTH, + DISCONNECT_DISASSOC +}; + +#define WL1271_CMD_STA_STATE_CONNECTED 1 + +struct wl12xx_cmd_set_peer_state { + struct wl1271_cmd_header header; + + u8 hlid; + u8 state; + + /* + * wmm is relevant for sta role only. + * ap role configures the per-sta wmm params in + * the add_peer command. + */ + u8 wmm; + u8 padding[1]; +} __packed; + +struct wl12xx_cmd_roc { + struct wl1271_cmd_header header; + + u8 role_id; + u8 channel; + u8 band; + u8 padding; +}; + +struct wl12xx_cmd_croc { + struct wl1271_cmd_header header; + + u8 role_id; + u8 padding[3]; +}; + +enum wl12xx_ssid_type { + WL12XX_SSID_TYPE_PUBLIC = 0, + WL12XX_SSID_TYPE_HIDDEN = 1, + WL12XX_SSID_TYPE_ANY = 2, +}; + +enum wl1271_psd_type { + WL1271_PSD_LEGACY = 0, + WL1271_PSD_UPSD_TRIGGER = 1, + WL1271_PSD_LEGACY_PSPOLL = 2, + WL1271_PSD_SAPSD = 3 +}; + +struct wl12xx_cmd_add_peer { + struct wl1271_cmd_header header; + + u8 addr[ETH_ALEN]; + u8 hlid; + u8 aid; + u8 psd_type[NUM_ACCESS_CATEGORIES_COPY]; + __le32 supported_rates; + u8 bss_index; + u8 sp_len; + u8 wmm; + u8 session_id; + u8 role_id; + u8 padding[3]; +} __packed; + +struct wl12xx_cmd_remove_peer { + struct wl1271_cmd_header header; + + u8 hlid; + u8 reason_opcode; + u8 send_deauth_flag; + u8 role_id; +} __packed; + +/* + * Continuous mode - packets are transferred to the host periodically + * via the data path. + * On demand - Log messages are stored in a cyclic buffer in the + * firmware, and only transferred to the host when explicitly requested + */ +enum wl12xx_fwlogger_log_mode { + WL12XX_FWLOG_CONTINUOUS, +}; + +/* Include/exclude timestamps from the log messages */ +enum wl12xx_fwlogger_timestamp { + WL12XX_FWLOG_TIMESTAMP_DISABLED, + WL12XX_FWLOG_TIMESTAMP_ENABLED +}; + +/* + * Logs can be routed to the debug pinouts (where available), to the host bus + * (SDIO/SPI), or dropped + */ +enum wl12xx_fwlogger_output { + WL12XX_FWLOG_OUTPUT_NONE, + WL12XX_FWLOG_OUTPUT_DBG_PINS, + WL12XX_FWLOG_OUTPUT_HOST, +}; + +struct wl12xx_cmd_regdomain_dfs_config { + struct wl1271_cmd_header header; + + __le32 ch_bit_map1; + __le32 ch_bit_map2; + u8 dfs_region; + u8 padding[3]; +} __packed; + +enum wlcore_generic_cfg_feature { + WLCORE_CFG_FEATURE_RADAR_DEBUG = 2, +}; + +struct wlcore_cmd_generic_cfg { + struct wl1271_cmd_header header; + + u8 role_id; + u8 feature; + u8 enable; + u8 value; +} __packed; + +struct wl12xx_cmd_config_fwlog { + struct wl1271_cmd_header header; + + /* See enum wl12xx_fwlogger_log_mode */ + u8 logger_mode; + + /* Minimum log level threshold */ + u8 log_severity; + + /* Include/exclude timestamps from the log messages */ + u8 timestamp; + + /* See enum wl1271_fwlogger_output */ + u8 output; + + /* Regulates the frequency of log messages */ + u8 threshold; + + u8 padding[3]; +} __packed; + +struct wl12xx_cmd_start_fwlog { + struct wl1271_cmd_header header; +} __packed; + +struct wl12xx_cmd_stop_fwlog { + struct wl1271_cmd_header header; +} __packed; + +struct wl12xx_cmd_stop_channel_switch { + struct wl1271_cmd_header header; + + u8 role_id; + u8 padding[3]; +} __packed; + +/* Used to check radio status after calibration */ +#define MAX_TLV_LENGTH 500 +#define TEST_CMD_P2G_CAL 2 /* TX BiP */ + +struct wl1271_cmd_cal_p2g { + struct wl1271_cmd_header header; + + struct wl1271_cmd_test_header test; + + __le32 ver; + __le16 len; + u8 buf[MAX_TLV_LENGTH]; + u8 type; + u8 padding; + + __le16 radio_status; + + u8 sub_band_mask; + u8 padding2; +} __packed; + +#endif /* __WL1271_CMD_H__ */ -- cgit v1.2.3