From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/nfc/st21nfca/se.c | 440 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 440 insertions(+) create mode 100644 drivers/nfc/st21nfca/se.c (limited to 'drivers/nfc/st21nfca/se.c') diff --git a/drivers/nfc/st21nfca/se.c b/drivers/nfc/st21nfca/se.c new file mode 100644 index 000000000..df8d27cf2 --- /dev/null +++ b/drivers/nfc/st21nfca/se.c @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + */ + +#include + +#include "st21nfca.h" + +#define ST21NFCA_EVT_UICC_ACTIVATE 0x10 +#define ST21NFCA_EVT_UICC_DEACTIVATE 0x13 +#define ST21NFCA_EVT_SE_HARD_RESET 0x20 +#define ST21NFCA_EVT_SE_SOFT_RESET 0x11 +#define ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER 0x21 +#define ST21NFCA_EVT_SE_ACTIVATE 0x22 +#define ST21NFCA_EVT_SE_DEACTIVATE 0x23 + +#define ST21NFCA_EVT_TRANSMIT_DATA 0x10 +#define ST21NFCA_EVT_WTX_REQUEST 0x11 + +#define ST21NFCA_EVT_CONNECTIVITY 0x10 +#define ST21NFCA_EVT_TRANSACTION 0x12 + +#define ST21NFCA_SE_TO_HOT_PLUG 1000 +/* Connectivity pipe only */ +#define ST21NFCA_SE_COUNT_PIPE_UICC 0x01 +/* Connectivity + APDU Reader pipe */ +#define ST21NFCA_SE_COUNT_PIPE_EMBEDDED 0x02 + +#define ST21NFCA_SE_MODE_OFF 0x00 +#define ST21NFCA_SE_MODE_ON 0x01 + +#define ST21NFCA_PARAM_ATR 0x01 +#define ST21NFCA_ATR_DEFAULT_BWI 0x04 + +/* + * WT = 2^BWI/10[s], convert into msecs and add a secure + * room by increasing by 2 this timeout + */ +#define ST21NFCA_BWI_TO_TIMEOUT(x) ((1 << x) * 200) +#define ST21NFCA_ATR_GET_Y_FROM_TD(x) (x >> 4) + +/* If TA is present bit 0 is set */ +#define ST21NFCA_ATR_TA_PRESENT(x) (x & 0x01) +/* If TB is present bit 1 is set */ +#define ST21NFCA_ATR_TB_PRESENT(x) (x & 0x02) + +static u8 st21nfca_se_get_bwi(struct nfc_hci_dev *hdev) +{ + int i; + u8 td; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + /* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */ + for (i = 1; i < ST21NFCA_ESE_MAX_LENGTH; i++) { + td = ST21NFCA_ATR_GET_Y_FROM_TD(info->se_info.atr[i]); + if (ST21NFCA_ATR_TA_PRESENT(td)) + i++; + if (ST21NFCA_ATR_TB_PRESENT(td)) { + i++; + return info->se_info.atr[i] >> 4; + } + } + return ST21NFCA_ATR_DEFAULT_BWI; +} + +static void st21nfca_se_get_atr(struct nfc_hci_dev *hdev) +{ + int r; + struct sk_buff *skb; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + r = nfc_hci_get_param(hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_PARAM_ATR, &skb); + if (r < 0) + return; + + if (skb->len <= ST21NFCA_ESE_MAX_LENGTH) { + memcpy(info->se_info.atr, skb->data, skb->len); + info->se_info.wt_timeout = + ST21NFCA_BWI_TO_TIMEOUT(st21nfca_se_get_bwi(hdev)); + } + kfree_skb(skb); +} + +static int st21nfca_hci_control_se(struct nfc_hci_dev *hdev, u32 se_idx, + u8 state) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + int r, i; + struct sk_buff *sk_host_list; + u8 se_event, host_id; + + switch (se_idx) { + case NFC_HCI_UICC_HOST_ID: + se_event = (state == ST21NFCA_SE_MODE_ON ? + ST21NFCA_EVT_UICC_ACTIVATE : + ST21NFCA_EVT_UICC_DEACTIVATE); + + info->se_info.count_pipes = 0; + info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_UICC; + break; + case ST21NFCA_ESE_HOST_ID: + se_event = (state == ST21NFCA_SE_MODE_ON ? + ST21NFCA_EVT_SE_ACTIVATE : + ST21NFCA_EVT_SE_DEACTIVATE); + + info->se_info.count_pipes = 0; + info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_EMBEDDED; + break; + default: + return -EINVAL; + } + + /* + * Wait for an EVT_HOT_PLUG in order to + * retrieve a relevant host list. + */ + reinit_completion(&info->se_info.req_completion); + r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE, se_event, + NULL, 0); + if (r < 0) + return r; + + mod_timer(&info->se_info.se_active_timer, jiffies + + msecs_to_jiffies(ST21NFCA_SE_TO_HOT_PLUG)); + info->se_info.se_active = true; + + /* Ignore return value and check in any case the host_list */ + wait_for_completion_interruptible(&info->se_info.req_completion); + + r = nfc_hci_get_param(hdev, NFC_HCI_ADMIN_GATE, + NFC_HCI_ADMIN_HOST_LIST, + &sk_host_list); + if (r < 0) + return r; + + for (i = 0; i < sk_host_list->len && + sk_host_list->data[i] != se_idx; i++) + ; + host_id = sk_host_list->data[i]; + kfree_skb(sk_host_list); + + if (state == ST21NFCA_SE_MODE_ON && host_id == se_idx) + return se_idx; + else if (state == ST21NFCA_SE_MODE_OFF && host_id != se_idx) + return se_idx; + + return -1; +} + +int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + int se_count = 0; + + if (test_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks)) + return 0; + + if (info->se_status->is_uicc_present) { + nfc_add_se(hdev->ndev, NFC_HCI_UICC_HOST_ID, NFC_SE_UICC); + se_count++; + } + + if (info->se_status->is_ese_present) { + nfc_add_se(hdev->ndev, ST21NFCA_ESE_HOST_ID, NFC_SE_EMBEDDED); + se_count++; + } + + return !se_count; +} +EXPORT_SYMBOL(st21nfca_hci_discover_se); + +int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx) +{ + int r; + + /* + * According to upper layer, se_idx == NFC_SE_UICC when + * info->se_status->is_uicc_enable is true should never happen. + * Same for eSE. + */ + r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_ON); + if (r == ST21NFCA_ESE_HOST_ID) { + st21nfca_se_get_atr(hdev); + r = nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0); + if (r < 0) + return r; + } else if (r < 0) { + /* + * The activation tentative failed, the secure element + * is not connected. Remove from the list. + */ + nfc_remove_se(hdev->ndev, se_idx); + return r; + } + + return 0; +} +EXPORT_SYMBOL(st21nfca_hci_enable_se); + +int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx) +{ + int r; + + /* + * According to upper layer, se_idx == NFC_SE_UICC when + * info->se_status->is_uicc_enable is true should never happen + * Same for eSE. + */ + r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_OFF); + if (r < 0) + return r; + + return 0; +} +EXPORT_SYMBOL(st21nfca_hci_disable_se); + +int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx, + u8 *apdu, size_t apdu_length, + se_io_cb_t cb, void *cb_context) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_debug("se_io %x\n", se_idx); + + switch (se_idx) { + case ST21NFCA_ESE_HOST_ID: + info->se_info.cb = cb; + info->se_info.cb_context = cb_context; + mod_timer(&info->se_info.bwi_timer, jiffies + + msecs_to_jiffies(info->se_info.wt_timeout)); + info->se_info.bwi_active = true; + return nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_EVT_TRANSMIT_DATA, + apdu, apdu_length); + default: + return -ENODEV; + } +} +EXPORT_SYMBOL(st21nfca_hci_se_io); + +static void st21nfca_se_wt_work(struct work_struct *work) +{ + /* + * No answer from the secure element + * within the defined timeout. + * Let's send a reset request as recovery procedure. + * According to the situation, we first try to send a software reset + * to the secure element. If the next command is still not + * answering in time, we send to the CLF a secure element hardware + * reset request. + */ + /* hardware reset managed through VCC_UICC_OUT power supply */ + u8 param = 0x01; + struct st21nfca_hci_info *info = container_of(work, + struct st21nfca_hci_info, + se_info.timeout_work); + + info->se_info.bwi_active = false; + + if (!info->se_info.xch_error) { + info->se_info.xch_error = true; + nfc_hci_send_event(info->hdev, ST21NFCA_APDU_READER_GATE, + ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0); + } else { + info->se_info.xch_error = false; + nfc_hci_send_event(info->hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_EVT_SE_HARD_RESET, ¶m, 1); + } + info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME); +} + +static void st21nfca_se_wt_timeout(struct timer_list *t) +{ + struct st21nfca_hci_info *info = from_timer(info, t, se_info.bwi_timer); + + schedule_work(&info->se_info.timeout_work); +} + +static void st21nfca_se_activation_timeout(struct timer_list *t) +{ + struct st21nfca_hci_info *info = from_timer(info, t, + se_info.se_active_timer); + + info->se_info.se_active = false; + + complete(&info->se_info.req_completion); +} + +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ +int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, + u8 event, struct sk_buff *skb) +{ + int r = 0; + struct device *dev = &hdev->ndev->dev; + struct nfc_evt_transaction *transaction; + u32 aid_len; + u8 params_len; + + pr_debug("connectivity gate event: %x\n", event); + + switch (event) { + case ST21NFCA_EVT_CONNECTIVITY: + r = nfc_se_connectivity(hdev->ndev, host); + break; + case ST21NFCA_EVT_TRANSACTION: + /* According to specification etsi 102 622 + * 11.2.2.4 EVT_TRANSACTION Table 52 + * Description Tag Length + * AID 81 5 to 16 + * PARAMETERS 82 0 to 255 + * + * The key differences are aid storage length is variably sized + * in the packet, but fixed in nfc_evt_transaction, and that the aid_len + * is u8 in the packet, but u32 in the structure, and the tags in + * the packet are not included in nfc_evt_transaction. + * + * size in bytes: 1 1 5-16 1 1 0-255 + * offset: 0 1 2 aid_len + 2 aid_len + 3 aid_len + 4 + * member name: aid_tag(M) aid_len aid params_tag(M) params_len params + * example: 0x81 5-16 X 0x82 0-255 X + */ + if (skb->len < 2 || skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG) + return -EPROTO; + + aid_len = skb->data[1]; + + if (skb->len < aid_len + 4 || aid_len > sizeof(transaction->aid)) + return -EPROTO; + + params_len = skb->data[aid_len + 3]; + + /* Verify PARAMETERS tag is (82), and final check that there is enough + * space in the packet to read everything. + */ + if ((skb->data[aid_len + 2] != NFC_EVT_TRANSACTION_PARAMS_TAG) || + (skb->len < aid_len + 4 + params_len)) + return -EPROTO; + + transaction = devm_kzalloc(dev, sizeof(*transaction) + params_len, GFP_KERNEL); + if (!transaction) + return -ENOMEM; + + transaction->aid_len = aid_len; + transaction->params_len = params_len; + + memcpy(transaction->aid, &skb->data[2], aid_len); + memcpy(transaction->params, &skb->data[aid_len + 4], params_len); + + r = nfc_se_transaction(hdev->ndev, host, transaction); + break; + default: + nfc_err(&hdev->ndev->dev, "Unexpected event on connectivity gate\n"); + return 1; + } + kfree_skb(skb); + return r; +} +EXPORT_SYMBOL(st21nfca_connectivity_event_received); + +int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev, + u8 event, struct sk_buff *skb) +{ + int r = 0; + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + pr_debug("apdu reader gate event: %x\n", event); + + switch (event) { + case ST21NFCA_EVT_TRANSMIT_DATA: + del_timer_sync(&info->se_info.bwi_timer); + cancel_work_sync(&info->se_info.timeout_work); + info->se_info.bwi_active = false; + r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE, + ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER, NULL, 0); + if (r < 0) + goto exit; + + info->se_info.cb(info->se_info.cb_context, + skb->data, skb->len, 0); + break; + case ST21NFCA_EVT_WTX_REQUEST: + mod_timer(&info->se_info.bwi_timer, jiffies + + msecs_to_jiffies(info->se_info.wt_timeout)); + break; + default: + nfc_err(&hdev->ndev->dev, "Unexpected event on apdu reader gate\n"); + return 1; + } + +exit: + kfree_skb(skb); + return r; +} +EXPORT_SYMBOL(st21nfca_apdu_reader_event_received); + +void st21nfca_se_init(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + init_completion(&info->se_info.req_completion); + INIT_WORK(&info->se_info.timeout_work, st21nfca_se_wt_work); + /* initialize timers */ + timer_setup(&info->se_info.bwi_timer, st21nfca_se_wt_timeout, 0); + info->se_info.bwi_active = false; + + timer_setup(&info->se_info.se_active_timer, + st21nfca_se_activation_timeout, 0); + info->se_info.se_active = false; + + info->se_info.count_pipes = 0; + info->se_info.expected_pipes = 0; + + info->se_info.xch_error = false; + + info->se_info.wt_timeout = + ST21NFCA_BWI_TO_TIMEOUT(ST21NFCA_ATR_DEFAULT_BWI); +} +EXPORT_SYMBOL(st21nfca_se_init); + +void st21nfca_se_deinit(struct nfc_hci_dev *hdev) +{ + struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev); + + if (info->se_info.bwi_active) + del_timer_sync(&info->se_info.bwi_timer); + if (info->se_info.se_active) + del_timer_sync(&info->se_info.se_active_timer); + + cancel_work_sync(&info->se_info.timeout_work); + info->se_info.bwi_active = false; + info->se_info.se_active = false; +} +EXPORT_SYMBOL(st21nfca_se_deinit); -- cgit v1.2.3