From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/opp/cpu.c | 236 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 236 insertions(+) create mode 100644 drivers/opp/cpu.c (limited to 'drivers/opp/cpu.c') diff --git a/drivers/opp/cpu.c b/drivers/opp/cpu.c new file mode 100644 index 000000000..3c3506021 --- /dev/null +++ b/drivers/opp/cpu.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Generic OPP helper interface for CPU device + * + * Copyright (C) 2009-2014 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +#include "opp.h" + +#ifdef CONFIG_CPU_FREQ + +/** + * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device + * @dev: device for which we do this operation + * @table: Cpufreq table returned back to caller + * + * Generate a cpufreq table for a provided device- this assumes that the + * opp table is already initialized and ready for usage. + * + * This function allocates required memory for the cpufreq table. It is + * expected that the caller does the required maintenance such as freeing + * the table as required. + * + * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM + * if no memory available for the operation (table is not populated), returns 0 + * if successful and table is populated. + * + * WARNING: It is important for the callers to ensure refreshing their copy of + * the table if any of the mentioned functions have been invoked in the interim. + */ +int dev_pm_opp_init_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **opp_table) +{ + struct dev_pm_opp *opp; + struct cpufreq_frequency_table *freq_table = NULL; + int i, max_opps, ret = 0; + unsigned long rate; + + max_opps = dev_pm_opp_get_opp_count(dev); + if (max_opps <= 0) + return max_opps ? max_opps : -ENODATA; + + freq_table = kcalloc((max_opps + 1), sizeof(*freq_table), GFP_KERNEL); + if (!freq_table) + return -ENOMEM; + + for (i = 0, rate = 0; i < max_opps; i++, rate++) { + /* find next rate */ + opp = dev_pm_opp_find_freq_ceil(dev, &rate); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + goto out; + } + freq_table[i].driver_data = i; + freq_table[i].frequency = rate / 1000; + + /* Is Boost/turbo opp ? */ + if (dev_pm_opp_is_turbo(opp)) + freq_table[i].flags = CPUFREQ_BOOST_FREQ; + + dev_pm_opp_put(opp); + } + + freq_table[i].driver_data = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *opp_table = &freq_table[0]; + +out: + if (ret) + kfree(freq_table); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table); + +/** + * dev_pm_opp_free_cpufreq_table() - free the cpufreq table + * @dev: device for which we do this operation + * @table: table to free + * + * Free up the table allocated by dev_pm_opp_init_cpufreq_table + */ +void dev_pm_opp_free_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **opp_table) +{ + if (!opp_table) + return; + + kfree(*opp_table); + *opp_table = NULL; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); +#endif /* CONFIG_CPU_FREQ */ + +void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, + int last_cpu) +{ + struct device *cpu_dev; + int cpu; + + WARN_ON(cpumask_empty(cpumask)); + + for_each_cpu(cpu, cpumask) { + if (cpu == last_cpu) + break; + + cpu_dev = get_cpu_device(cpu); + if (!cpu_dev) { + pr_err("%s: failed to get cpu%d device\n", __func__, + cpu); + continue; + } + + dev_pm_opp_remove_table(cpu_dev); + } +} + +/** + * dev_pm_opp_cpumask_remove_table() - Removes OPP table for @cpumask + * @cpumask: cpumask for which OPP table needs to be removed + * + * This removes the OPP tables for CPUs present in the @cpumask. + * This should be used to remove all the OPPs entries associated with + * the cpus in @cpumask. + */ +void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask) +{ + _dev_pm_opp_cpumask_remove_table(cpumask, -1); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_remove_table); + +/** + * dev_pm_opp_set_sharing_cpus() - Mark OPP table as shared by few CPUs + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask of the CPUs which share the OPP table with @cpu_dev + * + * This marks OPP table of the @cpu_dev as shared by the CPUs present in + * @cpumask. + * + * Returns -ENODEV if OPP table isn't already present. + */ +int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, + const struct cpumask *cpumask) +{ + struct opp_device *opp_dev; + struct opp_table *opp_table; + struct device *dev; + int cpu, ret = 0; + + opp_table = _find_opp_table(cpu_dev); + if (IS_ERR(opp_table)) + return PTR_ERR(opp_table); + + for_each_cpu(cpu, cpumask) { + if (cpu == cpu_dev->id) + continue; + + dev = get_cpu_device(cpu); + if (!dev) { + dev_err(cpu_dev, "%s: failed to get cpu%d device\n", + __func__, cpu); + continue; + } + + opp_dev = _add_opp_dev(dev, opp_table); + if (!opp_dev) { + dev_err(dev, "%s: failed to add opp-dev for cpu%d device\n", + __func__, cpu); + continue; + } + + /* Mark opp-table as multiple CPUs are sharing it now */ + opp_table->shared_opp = OPP_TABLE_ACCESS_SHARED; + } + + dev_pm_opp_put_opp_table(opp_table); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus); + +/** + * dev_pm_opp_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with @cpu_dev + * @cpu_dev: CPU device for which we do this operation + * @cpumask: cpumask to update with information of sharing CPUs + * + * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev. + * + * Returns -ENODEV if OPP table isn't already present and -EINVAL if the OPP + * table's status is access-unknown. + */ +int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) +{ + struct opp_device *opp_dev; + struct opp_table *opp_table; + int ret = 0; + + opp_table = _find_opp_table(cpu_dev); + if (IS_ERR(opp_table)) + return PTR_ERR(opp_table); + + if (opp_table->shared_opp == OPP_TABLE_ACCESS_UNKNOWN) { + ret = -EINVAL; + goto put_opp_table; + } + + cpumask_clear(cpumask); + + if (opp_table->shared_opp == OPP_TABLE_ACCESS_SHARED) { + mutex_lock(&opp_table->lock); + list_for_each_entry(opp_dev, &opp_table->dev_list, node) + cpumask_set_cpu(opp_dev->dev->id, cpumask); + mutex_unlock(&opp_table->lock); + } else { + cpumask_set_cpu(cpu_dev->id, cpumask); + } + +put_opp_table: + dev_pm_opp_put_opp_table(opp_table); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus); -- cgit v1.2.3