From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/parisc/power.c | 255 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 255 insertions(+) create mode 100644 drivers/parisc/power.c (limited to 'drivers/parisc/power.c') diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c new file mode 100644 index 000000000..456776bd8 --- /dev/null +++ b/drivers/parisc/power.c @@ -0,0 +1,255 @@ +/* + * linux/drivers/parisc/power.c + * HP PARISC soft power switch support driver + * + * Copyright (c) 2001-2007 Helge Deller + * All rights reserved. + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * + * HINT: + * Support of the soft power switch button may be enabled or disabled at + * runtime through the "/proc/sys/kernel/power" procfs entry. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRIVER_NAME "powersw" +#define KTHREAD_NAME "kpowerswd" + +/* how often should the power button be polled ? */ +#define POWERSWITCH_POLL_PER_SEC 2 + +/* how long does the power button needs to be down until we react ? */ +#define POWERSWITCH_DOWN_SEC 2 + +/* assembly code to access special registers */ +/* taken from PCXL ERS page 82 */ +#define DIAG_CODE(code) (0x14000000 + ((code)<<5)) + +#define MFCPU_X(rDiagReg, t_ch, t_th, code) \ + (DIAG_CODE(code) + ((rDiagReg)<<21) + ((t_ch)<<16) + ((t_th)<<0) ) + +#define MTCPU(dr, gr) MFCPU_X(dr, gr, 0, 0x12) /* move value of gr to dr[dr] */ +#define MFCPU_C(dr, gr) MFCPU_X(dr, gr, 0, 0x30) /* for dr0 and dr8 only ! */ +#define MFCPU_T(dr, gr) MFCPU_X(dr, 0, gr, 0xa0) /* all dr except dr0 and dr8 */ + +#define __getDIAG(dr) ( { \ + register unsigned long __res asm("r28");\ + __asm__ __volatile__ ( \ + ".word %1" : "=&r" (__res) : "i" (MFCPU_T(dr,28) ) \ + ); \ + __res; \ +} ) + +/* local shutdown counter */ +static int shutdown_timer __read_mostly; + +/* check, give feedback and start shutdown after one second */ +static void process_shutdown(void) +{ + if (shutdown_timer == 0) + printk(KERN_ALERT KTHREAD_NAME ": Shutdown requested...\n"); + + shutdown_timer++; + + /* wait until the button was pressed for 1 second */ + if (shutdown_timer == (POWERSWITCH_DOWN_SEC*POWERSWITCH_POLL_PER_SEC)) { + static const char msg[] = "Shutting down..."; + printk(KERN_INFO KTHREAD_NAME ": %s\n", msg); + lcd_print(msg); + + /* send kill signal */ + if (kill_cad_pid(SIGINT, 1)) { + /* just in case killing init process failed */ + machine_power_off(); + } + } +} + + +/* main power switch task struct */ +static struct task_struct *power_task; + +/* filename in /proc which can be used to enable/disable the power switch */ +#define SYSCTL_FILENAME "sys/kernel/power" + +/* soft power switch enabled/disabled */ +int pwrsw_enabled __read_mostly = 1; + +/* main kernel thread worker. It polls the button state */ +static int kpowerswd(void *param) +{ + __set_current_state(TASK_RUNNING); + + do { + int button_not_pressed; + unsigned long soft_power_reg = (unsigned long) param; + + schedule_timeout_interruptible(pwrsw_enabled ? HZ : HZ/POWERSWITCH_POLL_PER_SEC); + + if (unlikely(!pwrsw_enabled)) + continue; + + if (soft_power_reg) { + /* + * Non-Gecko-style machines: + * Check the power switch status which is read from the + * real I/O location at soft_power_reg. + * Bit 31 ("the lowest bit) is the status of the power switch. + * This bit is "1" if the button is NOT pressed. + */ + button_not_pressed = (gsc_readl(soft_power_reg) & 0x1); + } else { + /* + * On gecko style machines (e.g. 712/xx and 715/xx) + * the power switch status is stored in Bit 0 ("the highest bit") + * of CPU diagnose register 25. + * Warning: Some machines never reset the DIAG flag, even if + * the button has been released again. + */ + button_not_pressed = (__getDIAG(25) & 0x80000000); + } + + if (likely(button_not_pressed)) { + if (unlikely(shutdown_timer && /* avoid writing if not necessary */ + shutdown_timer < (POWERSWITCH_DOWN_SEC*POWERSWITCH_POLL_PER_SEC))) { + shutdown_timer = 0; + printk(KERN_INFO KTHREAD_NAME ": Shutdown request aborted.\n"); + } + } else + process_shutdown(); + + + } while (!kthread_should_stop()); + + return 0; +} + + +/* + * powerfail interruption handler (irq IRQ_FROM_REGION(CPU_IRQ_REGION)+2) + */ +#if 0 +static void powerfail_interrupt(int code, void *x) +{ + printk(KERN_CRIT "POWERFAIL INTERRUPTION !\n"); + poweroff(); +} +#endif + + + + +/* parisc_panic_event() is called by the panic handler. + * As soon as a panic occurs, our tasklets above will not be + * executed any longer. This function then re-enables the + * soft-power switch and allows the user to switch off the system + */ +static int parisc_panic_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + /* re-enable the soft-power switch */ + pdc_soft_power_button(0); + return NOTIFY_DONE; +} + +static struct notifier_block parisc_panic_block = { + .notifier_call = parisc_panic_event, + .priority = INT_MAX, +}; + + +static int __init power_init(void) +{ + unsigned long ret; + unsigned long soft_power_reg; + +#if 0 + request_irq( IRQ_FROM_REGION(CPU_IRQ_REGION)+2, &powerfail_interrupt, + 0, "powerfail", NULL); +#endif + + /* enable the soft power switch if possible */ + ret = pdc_soft_power_info(&soft_power_reg); + if (ret == PDC_OK) + ret = pdc_soft_power_button(1); + if (ret != PDC_OK) + soft_power_reg = -1UL; + + switch (soft_power_reg) { + case 0: printk(KERN_INFO DRIVER_NAME ": Gecko-style soft power switch enabled.\n"); + break; + + case -1UL: printk(KERN_INFO DRIVER_NAME ": Soft power switch support not available.\n"); + return -ENODEV; + + default: printk(KERN_INFO DRIVER_NAME ": Soft power switch at 0x%08lx enabled.\n", + soft_power_reg); + } + + power_task = kthread_run(kpowerswd, (void*)soft_power_reg, KTHREAD_NAME); + if (IS_ERR(power_task)) { + printk(KERN_ERR DRIVER_NAME ": thread creation failed. Driver not loaded.\n"); + pdc_soft_power_button(0); + return -EIO; + } + + /* Register a call for panic conditions. */ + atomic_notifier_chain_register(&panic_notifier_list, + &parisc_panic_block); + + return 0; +} + +static void __exit power_exit(void) +{ + kthread_stop(power_task); + + atomic_notifier_chain_unregister(&panic_notifier_list, + &parisc_panic_block); + + pdc_soft_power_button(0); +} + +arch_initcall(power_init); +module_exit(power_exit); + + +MODULE_AUTHOR("Helge Deller "); +MODULE_DESCRIPTION("Soft power switch driver"); +MODULE_LICENSE("Dual BSD/GPL"); -- cgit v1.2.3