From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pci/controller/dwc/pcie-artpec6.c | 500 ++++++++++++++++++++++++++++++ 1 file changed, 500 insertions(+) create mode 100644 drivers/pci/controller/dwc/pcie-artpec6.c (limited to 'drivers/pci/controller/dwc/pcie-artpec6.c') diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c new file mode 100644 index 000000000..98102079e --- /dev/null +++ b/drivers/pci/controller/dwc/pcie-artpec6.c @@ -0,0 +1,500 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PCIe host controller driver for Axis ARTPEC-6 SoC + * + * Author: Niklas Cassel + * + * Based on work done by Phil Edworthy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pcie-designware.h" + +#define to_artpec6_pcie(x) dev_get_drvdata((x)->dev) + +enum artpec_pcie_variants { + ARTPEC6, + ARTPEC7, +}; + +struct artpec6_pcie { + struct dw_pcie *pci; + struct regmap *regmap; /* DT axis,syscon-pcie */ + void __iomem *phy_base; /* DT phy */ + enum artpec_pcie_variants variant; + enum dw_pcie_device_mode mode; +}; + +struct artpec_pcie_of_data { + enum artpec_pcie_variants variant; + enum dw_pcie_device_mode mode; +}; + +static const struct of_device_id artpec6_pcie_of_match[]; + +/* ARTPEC-6 specific registers */ +#define PCIECFG 0x18 +#define PCIECFG_DBG_OEN BIT(24) +#define PCIECFG_CORE_RESET_REQ BIT(21) +#define PCIECFG_LTSSM_ENABLE BIT(20) +#define PCIECFG_DEVICE_TYPE_MASK GENMASK(19, 16) +#define PCIECFG_CLKREQ_B BIT(11) +#define PCIECFG_REFCLK_ENABLE BIT(10) +#define PCIECFG_PLL_ENABLE BIT(9) +#define PCIECFG_PCLK_ENABLE BIT(8) +#define PCIECFG_RISRCREN BIT(4) +#define PCIECFG_MODE_TX_DRV_EN BIT(3) +#define PCIECFG_CISRREN BIT(2) +#define PCIECFG_MACRO_ENABLE BIT(0) +/* ARTPEC-7 specific fields */ +#define PCIECFG_REFCLKSEL BIT(23) +#define PCIECFG_NOC_RESET BIT(3) + +#define PCIESTAT 0x1c +/* ARTPEC-7 specific fields */ +#define PCIESTAT_EXTREFCLK BIT(3) + +#define NOCCFG 0x40 +#define NOCCFG_ENABLE_CLK_PCIE BIT(4) +#define NOCCFG_POWER_PCIE_IDLEACK BIT(3) +#define NOCCFG_POWER_PCIE_IDLE BIT(2) +#define NOCCFG_POWER_PCIE_IDLEREQ BIT(1) + +#define PHY_STATUS 0x118 +#define PHY_COSPLLLOCK BIT(0) + +#define PHY_TX_ASIC_OUT 0x4040 +#define PHY_TX_ASIC_OUT_TX_ACK BIT(0) + +#define PHY_RX_ASIC_OUT 0x405c +#define PHY_RX_ASIC_OUT_ACK BIT(0) + +static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset) +{ + u32 val; + + regmap_read(artpec6_pcie->regmap, offset, &val); + return val; +} + +static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u32 val) +{ + regmap_write(artpec6_pcie->regmap, offset, val); +} + +static u64 artpec6_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr) +{ + struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); + struct dw_pcie_rp *pp = &pci->pp; + struct dw_pcie_ep *ep = &pci->ep; + + switch (artpec6_pcie->mode) { + case DW_PCIE_RC_TYPE: + return pci_addr - pp->cfg0_base; + case DW_PCIE_EP_TYPE: + return pci_addr - ep->phys_base; + default: + dev_err(pci->dev, "UNKNOWN device type\n"); + } + return pci_addr; +} + +static int artpec6_pcie_establish_link(struct dw_pcie *pci) +{ + struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); + u32 val; + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + val |= PCIECFG_LTSSM_ENABLE; + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); + + return 0; +} + +static void artpec6_pcie_stop_link(struct dw_pcie *pci) +{ + struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); + u32 val; + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + val &= ~PCIECFG_LTSSM_ENABLE; + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); +} + +static const struct dw_pcie_ops dw_pcie_ops = { + .cpu_addr_fixup = artpec6_pcie_cpu_addr_fixup, + .start_link = artpec6_pcie_establish_link, + .stop_link = artpec6_pcie_stop_link, +}; + +static void artpec6_pcie_wait_for_phy_a6(struct artpec6_pcie *artpec6_pcie) +{ + struct dw_pcie *pci = artpec6_pcie->pci; + struct device *dev = pci->dev; + u32 val; + unsigned int retries; + + retries = 50; + do { + usleep_range(1000, 2000); + val = artpec6_pcie_readl(artpec6_pcie, NOCCFG); + retries--; + } while (retries && + (val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE))); + if (!retries) + dev_err(dev, "PCIe clock manager did not leave idle state\n"); + + retries = 50; + do { + usleep_range(1000, 2000); + val = readl(artpec6_pcie->phy_base + PHY_STATUS); + retries--; + } while (retries && !(val & PHY_COSPLLLOCK)); + if (!retries) + dev_err(dev, "PHY PLL did not lock\n"); +} + +static void artpec6_pcie_wait_for_phy_a7(struct artpec6_pcie *artpec6_pcie) +{ + struct dw_pcie *pci = artpec6_pcie->pci; + struct device *dev = pci->dev; + u32 val; + u16 phy_status_tx, phy_status_rx; + unsigned int retries; + + retries = 50; + do { + usleep_range(1000, 2000); + val = artpec6_pcie_readl(artpec6_pcie, NOCCFG); + retries--; + } while (retries && + (val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE))); + if (!retries) + dev_err(dev, "PCIe clock manager did not leave idle state\n"); + + retries = 50; + do { + usleep_range(1000, 2000); + phy_status_tx = readw(artpec6_pcie->phy_base + PHY_TX_ASIC_OUT); + phy_status_rx = readw(artpec6_pcie->phy_base + PHY_RX_ASIC_OUT); + retries--; + } while (retries && ((phy_status_tx & PHY_TX_ASIC_OUT_TX_ACK) || + (phy_status_rx & PHY_RX_ASIC_OUT_ACK))); + if (!retries) + dev_err(dev, "PHY did not enter Pn state\n"); +} + +static void artpec6_pcie_wait_for_phy(struct artpec6_pcie *artpec6_pcie) +{ + switch (artpec6_pcie->variant) { + case ARTPEC6: + artpec6_pcie_wait_for_phy_a6(artpec6_pcie); + break; + case ARTPEC7: + artpec6_pcie_wait_for_phy_a7(artpec6_pcie); + break; + } +} + +static void artpec6_pcie_init_phy_a6(struct artpec6_pcie *artpec6_pcie) +{ + u32 val; + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + val |= PCIECFG_RISRCREN | /* Receiver term. 50 Ohm */ + PCIECFG_MODE_TX_DRV_EN | + PCIECFG_CISRREN | /* Reference clock term. 100 Ohm */ + PCIECFG_MACRO_ENABLE; + val |= PCIECFG_REFCLK_ENABLE; + val &= ~PCIECFG_DBG_OEN; + val &= ~PCIECFG_CLKREQ_B; + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); + usleep_range(5000, 6000); + + val = artpec6_pcie_readl(artpec6_pcie, NOCCFG); + val |= NOCCFG_ENABLE_CLK_PCIE; + artpec6_pcie_writel(artpec6_pcie, NOCCFG, val); + usleep_range(20, 30); + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + val |= PCIECFG_PCLK_ENABLE | PCIECFG_PLL_ENABLE; + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); + usleep_range(6000, 7000); + + val = artpec6_pcie_readl(artpec6_pcie, NOCCFG); + val &= ~NOCCFG_POWER_PCIE_IDLEREQ; + artpec6_pcie_writel(artpec6_pcie, NOCCFG, val); +} + +static void artpec6_pcie_init_phy_a7(struct artpec6_pcie *artpec6_pcie) +{ + struct dw_pcie *pci = artpec6_pcie->pci; + u32 val; + bool extrefclk; + + /* Check if external reference clock is connected */ + val = artpec6_pcie_readl(artpec6_pcie, PCIESTAT); + extrefclk = !!(val & PCIESTAT_EXTREFCLK); + dev_dbg(pci->dev, "Using reference clock: %s\n", + extrefclk ? "external" : "internal"); + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + val |= PCIECFG_RISRCREN | /* Receiver term. 50 Ohm */ + PCIECFG_PCLK_ENABLE; + if (extrefclk) + val |= PCIECFG_REFCLKSEL; + else + val &= ~PCIECFG_REFCLKSEL; + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); + usleep_range(10, 20); + + val = artpec6_pcie_readl(artpec6_pcie, NOCCFG); + val |= NOCCFG_ENABLE_CLK_PCIE; + artpec6_pcie_writel(artpec6_pcie, NOCCFG, val); + usleep_range(20, 30); + + val = artpec6_pcie_readl(artpec6_pcie, NOCCFG); + val &= ~NOCCFG_POWER_PCIE_IDLEREQ; + artpec6_pcie_writel(artpec6_pcie, NOCCFG, val); +} + +static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie) +{ + switch (artpec6_pcie->variant) { + case ARTPEC6: + artpec6_pcie_init_phy_a6(artpec6_pcie); + break; + case ARTPEC7: + artpec6_pcie_init_phy_a7(artpec6_pcie); + break; + } +} + +static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie) +{ + u32 val; + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + switch (artpec6_pcie->variant) { + case ARTPEC6: + val |= PCIECFG_CORE_RESET_REQ; + break; + case ARTPEC7: + val &= ~PCIECFG_NOC_RESET; + break; + } + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); +} + +static void artpec6_pcie_deassert_core_reset(struct artpec6_pcie *artpec6_pcie) +{ + u32 val; + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + switch (artpec6_pcie->variant) { + case ARTPEC6: + val &= ~PCIECFG_CORE_RESET_REQ; + break; + case ARTPEC7: + val |= PCIECFG_NOC_RESET; + break; + } + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); + usleep_range(100, 200); +} + +static int artpec6_pcie_host_init(struct dw_pcie_rp *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); + + if (artpec6_pcie->variant == ARTPEC7) { + pci->n_fts[0] = 180; + pci->n_fts[1] = 180; + } + artpec6_pcie_assert_core_reset(artpec6_pcie); + artpec6_pcie_init_phy(artpec6_pcie); + artpec6_pcie_deassert_core_reset(artpec6_pcie); + artpec6_pcie_wait_for_phy(artpec6_pcie); + + return 0; +} + +static const struct dw_pcie_host_ops artpec6_pcie_host_ops = { + .host_init = artpec6_pcie_host_init, +}; + +static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep) +{ + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); + struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); + enum pci_barno bar; + + artpec6_pcie_assert_core_reset(artpec6_pcie); + artpec6_pcie_init_phy(artpec6_pcie); + artpec6_pcie_deassert_core_reset(artpec6_pcie); + artpec6_pcie_wait_for_phy(artpec6_pcie); + + for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) + dw_pcie_ep_reset_bar(pci, bar); +} + +static int artpec6_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no, + enum pci_epc_irq_type type, u16 interrupt_num) +{ + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); + + switch (type) { + case PCI_EPC_IRQ_LEGACY: + dev_err(pci->dev, "EP cannot trigger legacy IRQs\n"); + return -EINVAL; + case PCI_EPC_IRQ_MSI: + return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num); + default: + dev_err(pci->dev, "UNKNOWN IRQ type\n"); + } + + return 0; +} + +static const struct dw_pcie_ep_ops pcie_ep_ops = { + .ep_init = artpec6_pcie_ep_init, + .raise_irq = artpec6_pcie_raise_irq, +}; + +static int artpec6_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct dw_pcie *pci; + struct artpec6_pcie *artpec6_pcie; + int ret; + const struct artpec_pcie_of_data *data; + enum artpec_pcie_variants variant; + enum dw_pcie_device_mode mode; + u32 val; + + data = of_device_get_match_data(dev); + if (!data) + return -EINVAL; + + variant = (enum artpec_pcie_variants)data->variant; + mode = (enum dw_pcie_device_mode)data->mode; + + artpec6_pcie = devm_kzalloc(dev, sizeof(*artpec6_pcie), GFP_KERNEL); + if (!artpec6_pcie) + return -ENOMEM; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + pci->dev = dev; + pci->ops = &dw_pcie_ops; + + artpec6_pcie->pci = pci; + artpec6_pcie->variant = variant; + artpec6_pcie->mode = mode; + + artpec6_pcie->phy_base = + devm_platform_ioremap_resource_byname(pdev, "phy"); + if (IS_ERR(artpec6_pcie->phy_base)) + return PTR_ERR(artpec6_pcie->phy_base); + + artpec6_pcie->regmap = + syscon_regmap_lookup_by_phandle(dev->of_node, + "axis,syscon-pcie"); + if (IS_ERR(artpec6_pcie->regmap)) + return PTR_ERR(artpec6_pcie->regmap); + + platform_set_drvdata(pdev, artpec6_pcie); + + switch (artpec6_pcie->mode) { + case DW_PCIE_RC_TYPE: + if (!IS_ENABLED(CONFIG_PCIE_ARTPEC6_HOST)) + return -ENODEV; + + pci->pp.ops = &artpec6_pcie_host_ops; + + ret = dw_pcie_host_init(&pci->pp); + if (ret < 0) + return ret; + break; + case DW_PCIE_EP_TYPE: + if (!IS_ENABLED(CONFIG_PCIE_ARTPEC6_EP)) + return -ENODEV; + + val = artpec6_pcie_readl(artpec6_pcie, PCIECFG); + val &= ~PCIECFG_DEVICE_TYPE_MASK; + artpec6_pcie_writel(artpec6_pcie, PCIECFG, val); + + pci->ep.ops = &pcie_ep_ops; + + return dw_pcie_ep_init(&pci->ep); + default: + dev_err(dev, "INVALID device type %d\n", artpec6_pcie->mode); + } + + return 0; +} + +static const struct artpec_pcie_of_data artpec6_pcie_rc_of_data = { + .variant = ARTPEC6, + .mode = DW_PCIE_RC_TYPE, +}; + +static const struct artpec_pcie_of_data artpec6_pcie_ep_of_data = { + .variant = ARTPEC6, + .mode = DW_PCIE_EP_TYPE, +}; + +static const struct artpec_pcie_of_data artpec7_pcie_rc_of_data = { + .variant = ARTPEC7, + .mode = DW_PCIE_RC_TYPE, +}; + +static const struct artpec_pcie_of_data artpec7_pcie_ep_of_data = { + .variant = ARTPEC7, + .mode = DW_PCIE_EP_TYPE, +}; + +static const struct of_device_id artpec6_pcie_of_match[] = { + { + .compatible = "axis,artpec6-pcie", + .data = &artpec6_pcie_rc_of_data, + }, + { + .compatible = "axis,artpec6-pcie-ep", + .data = &artpec6_pcie_ep_of_data, + }, + { + .compatible = "axis,artpec7-pcie", + .data = &artpec7_pcie_rc_of_data, + }, + { + .compatible = "axis,artpec7-pcie-ep", + .data = &artpec7_pcie_ep_of_data, + }, + {}, +}; + +static struct platform_driver artpec6_pcie_driver = { + .probe = artpec6_pcie_probe, + .driver = { + .name = "artpec6-pcie", + .of_match_table = artpec6_pcie_of_match, + .suppress_bind_attrs = true, + }, +}; +builtin_platform_driver(artpec6_pcie_driver); -- cgit v1.2.3