From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pci/controller/dwc/pcie-fu740.c | 356 ++++++++++++++++++++++++++++++++ 1 file changed, 356 insertions(+) create mode 100644 drivers/pci/controller/dwc/pcie-fu740.c (limited to 'drivers/pci/controller/dwc/pcie-fu740.c') diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c new file mode 100644 index 000000000..0c90583c0 --- /dev/null +++ b/drivers/pci/controller/dwc/pcie-fu740.c @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * FU740 DesignWare PCIe Controller integration + * Copyright (C) 2019-2021 SiFive, Inc. + * Paul Walmsley + * Greentime Hu + * + * Based in part on the i.MX6 PCIe host controller shim which is: + * + * Copyright (C) 2013 Kosagi + * https://www.kosagi.com + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pcie-designware.h" + +#define to_fu740_pcie(x) dev_get_drvdata((x)->dev) + +struct fu740_pcie { + struct dw_pcie pci; + void __iomem *mgmt_base; + struct gpio_desc *reset; + struct gpio_desc *pwren; + struct clk *pcie_aux; + struct reset_control *rst; +}; + +#define SIFIVE_DEVICESRESETREG 0x28 + +#define PCIEX8MGMT_PERST_N 0x0 +#define PCIEX8MGMT_APP_LTSSM_ENABLE 0x10 +#define PCIEX8MGMT_APP_HOLD_PHY_RST 0x18 +#define PCIEX8MGMT_DEVICE_TYPE 0x708 +#define PCIEX8MGMT_PHY0_CR_PARA_ADDR 0x860 +#define PCIEX8MGMT_PHY0_CR_PARA_RD_EN 0x870 +#define PCIEX8MGMT_PHY0_CR_PARA_RD_DATA 0x878 +#define PCIEX8MGMT_PHY0_CR_PARA_SEL 0x880 +#define PCIEX8MGMT_PHY0_CR_PARA_WR_DATA 0x888 +#define PCIEX8MGMT_PHY0_CR_PARA_WR_EN 0x890 +#define PCIEX8MGMT_PHY0_CR_PARA_ACK 0x898 +#define PCIEX8MGMT_PHY1_CR_PARA_ADDR 0x8a0 +#define PCIEX8MGMT_PHY1_CR_PARA_RD_EN 0x8b0 +#define PCIEX8MGMT_PHY1_CR_PARA_RD_DATA 0x8b8 +#define PCIEX8MGMT_PHY1_CR_PARA_SEL 0x8c0 +#define PCIEX8MGMT_PHY1_CR_PARA_WR_DATA 0x8c8 +#define PCIEX8MGMT_PHY1_CR_PARA_WR_EN 0x8d0 +#define PCIEX8MGMT_PHY1_CR_PARA_ACK 0x8d8 + +#define PCIEX8MGMT_PHY_CDR_TRACK_EN BIT(0) +#define PCIEX8MGMT_PHY_LOS_THRSHLD BIT(5) +#define PCIEX8MGMT_PHY_TERM_EN BIT(9) +#define PCIEX8MGMT_PHY_TERM_ACDC BIT(10) +#define PCIEX8MGMT_PHY_EN BIT(11) +#define PCIEX8MGMT_PHY_INIT_VAL (PCIEX8MGMT_PHY_CDR_TRACK_EN|\ + PCIEX8MGMT_PHY_LOS_THRSHLD|\ + PCIEX8MGMT_PHY_TERM_EN|\ + PCIEX8MGMT_PHY_TERM_ACDC|\ + PCIEX8MGMT_PHY_EN) + +#define PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 0x1008 +#define PCIEX8MGMT_PHY_LANE_OFF 0x100 +#define PCIEX8MGMT_PHY_LANE0_BASE (PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 0) +#define PCIEX8MGMT_PHY_LANE1_BASE (PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 1) +#define PCIEX8MGMT_PHY_LANE2_BASE (PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 2) +#define PCIEX8MGMT_PHY_LANE3_BASE (PCIEX8MGMT_PHY_LANEN_DIG_ASIC_RX_OVRD_IN_3 + 0x100 * 3) + +static void fu740_pcie_assert_reset(struct fu740_pcie *afp) +{ + /* Assert PERST_N GPIO */ + gpiod_set_value_cansleep(afp->reset, 0); + /* Assert controller PERST_N */ + writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_PERST_N); +} + +static void fu740_pcie_deassert_reset(struct fu740_pcie *afp) +{ + /* Deassert controller PERST_N */ + writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PERST_N); + /* Deassert PERST_N GPIO */ + gpiod_set_value_cansleep(afp->reset, 1); +} + +static void fu740_pcie_power_on(struct fu740_pcie *afp) +{ + gpiod_set_value_cansleep(afp->pwren, 1); + /* + * Ensure that PERST has been asserted for at least 100 ms. + * Section 2.2 of PCI Express Card Electromechanical Specification + * Revision 3.0 + */ + msleep(100); +} + +static void fu740_pcie_drive_reset(struct fu740_pcie *afp) +{ + fu740_pcie_assert_reset(afp); + fu740_pcie_power_on(afp); + fu740_pcie_deassert_reset(afp); +} + +static void fu740_phyregwrite(const uint8_t phy, const uint16_t addr, + const uint16_t wrdata, struct fu740_pcie *afp) +{ + struct device *dev = afp->pci.dev; + void __iomem *phy_cr_para_addr; + void __iomem *phy_cr_para_wr_data; + void __iomem *phy_cr_para_wr_en; + void __iomem *phy_cr_para_ack; + int ret, val; + + /* Setup */ + if (phy) { + phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ADDR; + phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_DATA; + phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_WR_EN; + phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_ACK; + } else { + phy_cr_para_addr = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ADDR; + phy_cr_para_wr_data = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_DATA; + phy_cr_para_wr_en = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_WR_EN; + phy_cr_para_ack = afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_ACK; + } + + writel_relaxed(addr, phy_cr_para_addr); + writel_relaxed(wrdata, phy_cr_para_wr_data); + writel_relaxed(1, phy_cr_para_wr_en); + + /* Wait for wait_idle */ + ret = readl_poll_timeout(phy_cr_para_ack, val, val, 10, 5000); + if (ret) + dev_warn(dev, "Wait for wait_idle state failed!\n"); + + /* Clear */ + writel_relaxed(0, phy_cr_para_wr_en); + + /* Wait for ~wait_idle */ + ret = readl_poll_timeout(phy_cr_para_ack, val, !val, 10, 5000); + if (ret) + dev_warn(dev, "Wait for !wait_idle state failed!\n"); +} + +static void fu740_pcie_init_phy(struct fu740_pcie *afp) +{ + /* Enable phy cr_para_sel interfaces */ + writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY0_CR_PARA_SEL); + writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_PHY1_CR_PARA_SEL); + + /* + * Wait 10 cr_para cycles to guarantee that the registers are ready + * to be edited. + */ + ndelay(10); + + /* Set PHY AC termination mode */ + fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); + fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); + fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); + fu740_phyregwrite(0, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); + fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE0_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); + fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE1_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); + fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE2_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); + fu740_phyregwrite(1, PCIEX8MGMT_PHY_LANE3_BASE, PCIEX8MGMT_PHY_INIT_VAL, afp); +} + +static int fu740_pcie_start_link(struct dw_pcie *pci) +{ + struct device *dev = pci->dev; + struct fu740_pcie *afp = dev_get_drvdata(dev); + u8 cap_exp = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + int ret; + u32 orig, tmp; + + /* + * Force 2.5GT/s when starting the link, due to some devices not + * probing at higher speeds. This happens with the PCIe switch + * on the Unmatched board when U-Boot has not initialised the PCIe. + * The fix in U-Boot is to force 2.5GT/s, which then gets cleared + * by the soft reset done by this driver. + */ + dev_dbg(dev, "cap_exp at %x\n", cap_exp); + dw_pcie_dbi_ro_wr_en(pci); + + tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP); + orig = tmp & PCI_EXP_LNKCAP_SLS; + tmp &= ~PCI_EXP_LNKCAP_SLS; + tmp |= PCI_EXP_LNKCAP_SLS_2_5GB; + dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp); + + /* Enable LTSSM */ + writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE); + + ret = dw_pcie_wait_for_link(pci); + if (ret) { + dev_err(dev, "error: link did not start\n"); + goto err; + } + + tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP); + if ((tmp & PCI_EXP_LNKCAP_SLS) != orig) { + dev_dbg(dev, "changing speed back to original\n"); + + tmp &= ~PCI_EXP_LNKCAP_SLS; + tmp |= orig; + dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp); + + tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); + tmp |= PORT_LOGIC_SPEED_CHANGE; + dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp); + + ret = dw_pcie_wait_for_link(pci); + if (ret) { + dev_err(dev, "error: link did not start at new speed\n"); + goto err; + } + } + + ret = 0; +err: + WARN_ON(ret); /* we assume that errors will be very rare */ + dw_pcie_dbi_ro_wr_dis(pci); + return ret; +} + +static int fu740_pcie_host_init(struct dw_pcie_rp *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct fu740_pcie *afp = to_fu740_pcie(pci); + struct device *dev = pci->dev; + int ret; + + /* Power on reset */ + fu740_pcie_drive_reset(afp); + + /* Enable pcieauxclk */ + ret = clk_prepare_enable(afp->pcie_aux); + if (ret) { + dev_err(dev, "unable to enable pcie_aux clock\n"); + return ret; + } + + /* + * Assert hold_phy_rst (hold the controller LTSSM in reset after + * power_up_rst_n for register programming with cr_para) + */ + writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST); + + /* Deassert power_up_rst_n */ + ret = reset_control_deassert(afp->rst); + if (ret) { + dev_err(dev, "unable to deassert pcie_power_up_rst_n\n"); + return ret; + } + + fu740_pcie_init_phy(afp); + + /* Disable pcieauxclk */ + clk_disable_unprepare(afp->pcie_aux); + /* Clear hold_phy_rst */ + writel_relaxed(0x0, afp->mgmt_base + PCIEX8MGMT_APP_HOLD_PHY_RST); + /* Enable pcieauxclk */ + clk_prepare_enable(afp->pcie_aux); + /* Set RC mode */ + writel_relaxed(0x4, afp->mgmt_base + PCIEX8MGMT_DEVICE_TYPE); + + return 0; +} + +static const struct dw_pcie_host_ops fu740_pcie_host_ops = { + .host_init = fu740_pcie_host_init, +}; + +static const struct dw_pcie_ops dw_pcie_ops = { + .start_link = fu740_pcie_start_link, +}; + +static int fu740_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct dw_pcie *pci; + struct fu740_pcie *afp; + + afp = devm_kzalloc(dev, sizeof(*afp), GFP_KERNEL); + if (!afp) + return -ENOMEM; + pci = &afp->pci; + pci->dev = dev; + pci->ops = &dw_pcie_ops; + pci->pp.ops = &fu740_pcie_host_ops; + + /* SiFive specific region: mgmt */ + afp->mgmt_base = devm_platform_ioremap_resource_byname(pdev, "mgmt"); + if (IS_ERR(afp->mgmt_base)) + return PTR_ERR(afp->mgmt_base); + + /* Fetch GPIOs */ + afp->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(afp->reset)) + return dev_err_probe(dev, PTR_ERR(afp->reset), "unable to get reset-gpios\n"); + + afp->pwren = devm_gpiod_get_optional(dev, "pwren", GPIOD_OUT_LOW); + if (IS_ERR(afp->pwren)) + return dev_err_probe(dev, PTR_ERR(afp->pwren), "unable to get pwren-gpios\n"); + + /* Fetch clocks */ + afp->pcie_aux = devm_clk_get(dev, "pcie_aux"); + if (IS_ERR(afp->pcie_aux)) + return dev_err_probe(dev, PTR_ERR(afp->pcie_aux), + "pcie_aux clock source missing or invalid\n"); + + /* Fetch reset */ + afp->rst = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(afp->rst)) + return dev_err_probe(dev, PTR_ERR(afp->rst), "unable to get reset\n"); + + platform_set_drvdata(pdev, afp); + + return dw_pcie_host_init(&pci->pp); +} + +static void fu740_pcie_shutdown(struct platform_device *pdev) +{ + struct fu740_pcie *afp = platform_get_drvdata(pdev); + + /* Bring down link, so bootloader gets clean state in case of reboot */ + fu740_pcie_assert_reset(afp); +} + +static const struct of_device_id fu740_pcie_of_match[] = { + { .compatible = "sifive,fu740-pcie", }, + {}, +}; + +static struct platform_driver fu740_pcie_driver = { + .driver = { + .name = "fu740-pcie", + .of_match_table = fu740_pcie_of_match, + .suppress_bind_attrs = true, + }, + .probe = fu740_pcie_probe, + .shutdown = fu740_pcie_shutdown, +}; + +builtin_platform_driver(fu740_pcie_driver); -- cgit v1.2.3