From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pci/controller/dwc/pcie-spear13xx.c | 266 ++++++++++++++++++++++++++++ 1 file changed, 266 insertions(+) create mode 100644 drivers/pci/controller/dwc/pcie-spear13xx.c (limited to 'drivers/pci/controller/dwc/pcie-spear13xx.c') diff --git a/drivers/pci/controller/dwc/pcie-spear13xx.c b/drivers/pci/controller/dwc/pcie-spear13xx.c new file mode 100644 index 000000000..99d47ae80 --- /dev/null +++ b/drivers/pci/controller/dwc/pcie-spear13xx.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PCIe host controller driver for ST Microelectronics SPEAr13xx SoCs + * + * SPEAr13xx PCIe Glue Layer Source Code + * + * Copyright (C) 2010-2014 ST Microelectronics + * Pratyush Anand + * Mohit Kumar + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pcie-designware.h" + +struct spear13xx_pcie { + struct dw_pcie *pci; + void __iomem *app_base; + struct phy *phy; + struct clk *clk; +}; + +struct pcie_app_reg { + u32 app_ctrl_0; /* cr0 */ + u32 app_ctrl_1; /* cr1 */ + u32 app_status_0; /* cr2 */ + u32 app_status_1; /* cr3 */ + u32 msg_status; /* cr4 */ + u32 msg_payload; /* cr5 */ + u32 int_sts; /* cr6 */ + u32 int_clr; /* cr7 */ + u32 int_mask; /* cr8 */ + u32 mst_bmisc; /* cr9 */ + u32 phy_ctrl; /* cr10 */ + u32 phy_status; /* cr11 */ + u32 cxpl_debug_info_0; /* cr12 */ + u32 cxpl_debug_info_1; /* cr13 */ + u32 ven_msg_ctrl_0; /* cr14 */ + u32 ven_msg_ctrl_1; /* cr15 */ + u32 ven_msg_data_0; /* cr16 */ + u32 ven_msg_data_1; /* cr17 */ + u32 ven_msi_0; /* cr18 */ + u32 ven_msi_1; /* cr19 */ + u32 mst_rmisc; /* cr20 */ +}; + +/* CR0 ID */ +#define APP_LTSSM_ENABLE_ID 3 +#define DEVICE_TYPE_RC (4 << 25) +#define MISCTRL_EN_ID 30 +#define REG_TRANSLATION_ENABLE 31 + +/* CR3 ID */ +#define XMLH_LINK_UP (1 << 6) + +/* CR6 */ +#define MSI_CTRL_INT (1 << 26) + +#define to_spear13xx_pcie(x) dev_get_drvdata((x)->dev) + +static int spear13xx_pcie_start_link(struct dw_pcie *pci) +{ + struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci); + struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base; + + /* enable ltssm */ + writel(DEVICE_TYPE_RC | (1 << MISCTRL_EN_ID) + | (1 << APP_LTSSM_ENABLE_ID) + | ((u32)1 << REG_TRANSLATION_ENABLE), + &app_reg->app_ctrl_0); + + return 0; +} + +static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg) +{ + struct spear13xx_pcie *spear13xx_pcie = arg; + struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base; + struct dw_pcie *pci = spear13xx_pcie->pci; + struct dw_pcie_rp *pp = &pci->pp; + unsigned int status; + + status = readl(&app_reg->int_sts); + + if (status & MSI_CTRL_INT) { + BUG_ON(!IS_ENABLED(CONFIG_PCI_MSI)); + dw_handle_msi_irq(pp); + } + + writel(status, &app_reg->int_clr); + + return IRQ_HANDLED; +} + +static void spear13xx_pcie_enable_interrupts(struct spear13xx_pcie *spear13xx_pcie) +{ + struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base; + + /* Enable MSI interrupt */ + if (IS_ENABLED(CONFIG_PCI_MSI)) + writel(readl(&app_reg->int_mask) | + MSI_CTRL_INT, &app_reg->int_mask); +} + +static int spear13xx_pcie_link_up(struct dw_pcie *pci) +{ + struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci); + struct pcie_app_reg __iomem *app_reg = spear13xx_pcie->app_base; + + if (readl(&app_reg->app_status_1) & XMLH_LINK_UP) + return 1; + + return 0; +} + +static int spear13xx_pcie_host_init(struct dw_pcie_rp *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci); + u32 exp_cap_off = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + u32 val; + + spear13xx_pcie->app_base = pci->dbi_base + 0x2000; + + /* + * this controller support only 128 bytes read size, however its + * default value in capability register is 512 bytes. So force + * it to 128 here. + */ + val = dw_pcie_readw_dbi(pci, exp_cap_off + PCI_EXP_DEVCTL); + val &= ~PCI_EXP_DEVCTL_READRQ; + dw_pcie_writew_dbi(pci, exp_cap_off + PCI_EXP_DEVCTL, val); + + dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, 0x104A); + dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, 0xCD80); + + spear13xx_pcie_enable_interrupts(spear13xx_pcie); + + return 0; +} + +static const struct dw_pcie_host_ops spear13xx_pcie_host_ops = { + .host_init = spear13xx_pcie_host_init, +}; + +static int spear13xx_add_pcie_port(struct spear13xx_pcie *spear13xx_pcie, + struct platform_device *pdev) +{ + struct dw_pcie *pci = spear13xx_pcie->pci; + struct dw_pcie_rp *pp = &pci->pp; + struct device *dev = &pdev->dev; + int ret; + + pp->irq = platform_get_irq(pdev, 0); + if (pp->irq < 0) + return pp->irq; + + ret = devm_request_irq(dev, pp->irq, spear13xx_pcie_irq_handler, + IRQF_SHARED | IRQF_NO_THREAD, + "spear1340-pcie", spear13xx_pcie); + if (ret) { + dev_err(dev, "failed to request irq %d\n", pp->irq); + return ret; + } + + pp->ops = &spear13xx_pcie_host_ops; + pp->msi_irq[0] = -ENODEV; + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static const struct dw_pcie_ops dw_pcie_ops = { + .link_up = spear13xx_pcie_link_up, + .start_link = spear13xx_pcie_start_link, +}; + +static int spear13xx_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct dw_pcie *pci; + struct spear13xx_pcie *spear13xx_pcie; + struct device_node *np = dev->of_node; + int ret; + + spear13xx_pcie = devm_kzalloc(dev, sizeof(*spear13xx_pcie), GFP_KERNEL); + if (!spear13xx_pcie) + return -ENOMEM; + + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + if (!pci) + return -ENOMEM; + + pci->dev = dev; + pci->ops = &dw_pcie_ops; + + spear13xx_pcie->pci = pci; + + spear13xx_pcie->phy = devm_phy_get(dev, "pcie-phy"); + if (IS_ERR(spear13xx_pcie->phy)) { + ret = PTR_ERR(spear13xx_pcie->phy); + if (ret == -EPROBE_DEFER) + dev_info(dev, "probe deferred\n"); + else + dev_err(dev, "couldn't get pcie-phy\n"); + return ret; + } + + phy_init(spear13xx_pcie->phy); + + spear13xx_pcie->clk = devm_clk_get(dev, NULL); + if (IS_ERR(spear13xx_pcie->clk)) { + dev_err(dev, "couldn't get clk for pcie\n"); + return PTR_ERR(spear13xx_pcie->clk); + } + ret = clk_prepare_enable(spear13xx_pcie->clk); + if (ret) { + dev_err(dev, "couldn't enable clk for pcie\n"); + return ret; + } + + if (of_property_read_bool(np, "st,pcie-is-gen1")) + pci->link_gen = 1; + + platform_set_drvdata(pdev, spear13xx_pcie); + + ret = spear13xx_add_pcie_port(spear13xx_pcie, pdev); + if (ret < 0) + goto fail_clk; + + return 0; + +fail_clk: + clk_disable_unprepare(spear13xx_pcie->clk); + + return ret; +} + +static const struct of_device_id spear13xx_pcie_of_match[] = { + { .compatible = "st,spear1340-pcie", }, + {}, +}; + +static struct platform_driver spear13xx_pcie_driver = { + .probe = spear13xx_pcie_probe, + .driver = { + .name = "spear-pcie", + .of_match_table = spear13xx_pcie_of_match, + .suppress_bind_attrs = true, + }, +}; + +builtin_platform_driver(spear13xx_pcie_driver); -- cgit v1.2.3