From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pci/controller/pci-rcar-gen2.c | 343 +++++++++++++++++++++++++++++++++ 1 file changed, 343 insertions(+) create mode 100644 drivers/pci/controller/pci-rcar-gen2.c (limited to 'drivers/pci/controller/pci-rcar-gen2.c') diff --git a/drivers/pci/controller/pci-rcar-gen2.c b/drivers/pci/controller/pci-rcar-gen2.c new file mode 100644 index 000000000..839695791 --- /dev/null +++ b/drivers/pci/controller/pci-rcar-gen2.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * pci-rcar-gen2: internal PCI bus support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * Author: Valentine Barshak + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../pci.h" + +/* AHB-PCI Bridge PCI communication registers */ +#define RCAR_AHBPCI_PCICOM_OFFSET 0x800 + +#define RCAR_PCIAHB_WIN1_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x00) +#define RCAR_PCIAHB_WIN2_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x04) +#define RCAR_PCIAHB_PREFETCH0 0x0 +#define RCAR_PCIAHB_PREFETCH4 0x1 +#define RCAR_PCIAHB_PREFETCH8 0x2 +#define RCAR_PCIAHB_PREFETCH16 0x3 + +#define RCAR_AHBPCI_WIN1_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x10) +#define RCAR_AHBPCI_WIN2_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x14) +#define RCAR_AHBPCI_WIN_CTR_MEM (3 << 1) +#define RCAR_AHBPCI_WIN_CTR_CFG (5 << 1) +#define RCAR_AHBPCI_WIN1_HOST (1 << 30) +#define RCAR_AHBPCI_WIN1_DEVICE (1 << 31) + +#define RCAR_PCI_INT_ENABLE_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x20) +#define RCAR_PCI_INT_STATUS_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x24) +#define RCAR_PCI_INT_SIGTABORT (1 << 0) +#define RCAR_PCI_INT_SIGRETABORT (1 << 1) +#define RCAR_PCI_INT_REMABORT (1 << 2) +#define RCAR_PCI_INT_PERR (1 << 3) +#define RCAR_PCI_INT_SIGSERR (1 << 4) +#define RCAR_PCI_INT_RESERR (1 << 5) +#define RCAR_PCI_INT_WIN1ERR (1 << 12) +#define RCAR_PCI_INT_WIN2ERR (1 << 13) +#define RCAR_PCI_INT_A (1 << 16) +#define RCAR_PCI_INT_B (1 << 17) +#define RCAR_PCI_INT_PME (1 << 19) +#define RCAR_PCI_INT_ALLERRORS (RCAR_PCI_INT_SIGTABORT | \ + RCAR_PCI_INT_SIGRETABORT | \ + RCAR_PCI_INT_REMABORT | \ + RCAR_PCI_INT_PERR | \ + RCAR_PCI_INT_SIGSERR | \ + RCAR_PCI_INT_RESERR | \ + RCAR_PCI_INT_WIN1ERR | \ + RCAR_PCI_INT_WIN2ERR) + +#define RCAR_AHB_BUS_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x30) +#define RCAR_AHB_BUS_MMODE_HTRANS (1 << 0) +#define RCAR_AHB_BUS_MMODE_BYTE_BURST (1 << 1) +#define RCAR_AHB_BUS_MMODE_WR_INCR (1 << 2) +#define RCAR_AHB_BUS_MMODE_HBUS_REQ (1 << 7) +#define RCAR_AHB_BUS_SMODE_READYCTR (1 << 17) +#define RCAR_AHB_BUS_MODE (RCAR_AHB_BUS_MMODE_HTRANS | \ + RCAR_AHB_BUS_MMODE_BYTE_BURST | \ + RCAR_AHB_BUS_MMODE_WR_INCR | \ + RCAR_AHB_BUS_MMODE_HBUS_REQ | \ + RCAR_AHB_BUS_SMODE_READYCTR) + +#define RCAR_USBCTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x34) +#define RCAR_USBCTR_USBH_RST (1 << 0) +#define RCAR_USBCTR_PCICLK_MASK (1 << 1) +#define RCAR_USBCTR_PLL_RST (1 << 2) +#define RCAR_USBCTR_DIRPD (1 << 8) +#define RCAR_USBCTR_PCIAHB_WIN2_EN (1 << 9) +#define RCAR_USBCTR_PCIAHB_WIN1_256M (0 << 10) +#define RCAR_USBCTR_PCIAHB_WIN1_512M (1 << 10) +#define RCAR_USBCTR_PCIAHB_WIN1_1G (2 << 10) +#define RCAR_USBCTR_PCIAHB_WIN1_2G (3 << 10) +#define RCAR_USBCTR_PCIAHB_WIN1_MASK (3 << 10) + +#define RCAR_PCI_ARBITER_CTR_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x40) +#define RCAR_PCI_ARBITER_PCIREQ0 (1 << 0) +#define RCAR_PCI_ARBITER_PCIREQ1 (1 << 1) +#define RCAR_PCI_ARBITER_PCIBP_MODE (1 << 12) + +#define RCAR_PCI_UNIT_REV_REG (RCAR_AHBPCI_PCICOM_OFFSET + 0x48) + +struct rcar_pci { + struct device *dev; + void __iomem *reg; + struct resource mem_res; + struct resource *cfg_res; + int irq; +}; + +/* PCI configuration space operations */ +static void __iomem *rcar_pci_cfg_base(struct pci_bus *bus, unsigned int devfn, + int where) +{ + struct rcar_pci *priv = bus->sysdata; + int slot, val; + + if (!pci_is_root_bus(bus) || PCI_FUNC(devfn)) + return NULL; + + /* Only one EHCI/OHCI device built-in */ + slot = PCI_SLOT(devfn); + if (slot > 2) + return NULL; + + /* bridge logic only has registers to 0x40 */ + if (slot == 0x0 && where >= 0x40) + return NULL; + + val = slot ? RCAR_AHBPCI_WIN1_DEVICE | RCAR_AHBPCI_WIN_CTR_CFG : + RCAR_AHBPCI_WIN1_HOST | RCAR_AHBPCI_WIN_CTR_CFG; + + iowrite32(val, priv->reg + RCAR_AHBPCI_WIN1_CTR_REG); + return priv->reg + (slot >> 1) * 0x100 + where; +} + +#ifdef CONFIG_PCI_DEBUG +/* if debug enabled, then attach an error handler irq to the bridge */ + +static irqreturn_t rcar_pci_err_irq(int irq, void *pw) +{ + struct rcar_pci *priv = pw; + struct device *dev = priv->dev; + u32 status = ioread32(priv->reg + RCAR_PCI_INT_STATUS_REG); + + if (status & RCAR_PCI_INT_ALLERRORS) { + dev_err(dev, "error irq: status %08x\n", status); + + /* clear the error(s) */ + iowrite32(status & RCAR_PCI_INT_ALLERRORS, + priv->reg + RCAR_PCI_INT_STATUS_REG); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static void rcar_pci_setup_errirq(struct rcar_pci *priv) +{ + struct device *dev = priv->dev; + int ret; + u32 val; + + ret = devm_request_irq(dev, priv->irq, rcar_pci_err_irq, + IRQF_SHARED, "error irq", priv); + if (ret) { + dev_err(dev, "cannot claim IRQ for error handling\n"); + return; + } + + val = ioread32(priv->reg + RCAR_PCI_INT_ENABLE_REG); + val |= RCAR_PCI_INT_ALLERRORS; + iowrite32(val, priv->reg + RCAR_PCI_INT_ENABLE_REG); +} +#else +static inline void rcar_pci_setup_errirq(struct rcar_pci *priv) { } +#endif + +/* PCI host controller setup */ +static void rcar_pci_setup(struct rcar_pci *priv) +{ + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(priv); + struct device *dev = priv->dev; + void __iomem *reg = priv->reg; + struct resource_entry *entry; + unsigned long window_size; + unsigned long window_addr; + unsigned long window_pci; + u32 val; + + entry = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM); + if (!entry) { + window_addr = 0x40000000; + window_pci = 0x40000000; + window_size = SZ_1G; + } else { + window_addr = entry->res->start; + window_pci = entry->res->start - entry->offset; + window_size = resource_size(entry->res); + } + + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + + val = ioread32(reg + RCAR_PCI_UNIT_REV_REG); + dev_info(dev, "PCI: revision %x\n", val); + + /* Disable Direct Power Down State and assert reset */ + val = ioread32(reg + RCAR_USBCTR_REG) & ~RCAR_USBCTR_DIRPD; + val |= RCAR_USBCTR_USBH_RST | RCAR_USBCTR_PLL_RST; + iowrite32(val, reg + RCAR_USBCTR_REG); + udelay(4); + + /* De-assert reset and reset PCIAHB window1 size */ + val &= ~(RCAR_USBCTR_PCIAHB_WIN1_MASK | RCAR_USBCTR_PCICLK_MASK | + RCAR_USBCTR_USBH_RST | RCAR_USBCTR_PLL_RST); + + /* Setup PCIAHB window1 size */ + switch (window_size) { + case SZ_2G: + val |= RCAR_USBCTR_PCIAHB_WIN1_2G; + break; + case SZ_1G: + val |= RCAR_USBCTR_PCIAHB_WIN1_1G; + break; + case SZ_512M: + val |= RCAR_USBCTR_PCIAHB_WIN1_512M; + break; + default: + pr_warn("unknown window size %ld - defaulting to 256M\n", + window_size); + window_size = SZ_256M; + fallthrough; + case SZ_256M: + val |= RCAR_USBCTR_PCIAHB_WIN1_256M; + break; + } + iowrite32(val, reg + RCAR_USBCTR_REG); + + /* Configure AHB master and slave modes */ + iowrite32(RCAR_AHB_BUS_MODE, reg + RCAR_AHB_BUS_CTR_REG); + + /* Configure PCI arbiter */ + val = ioread32(reg + RCAR_PCI_ARBITER_CTR_REG); + val |= RCAR_PCI_ARBITER_PCIREQ0 | RCAR_PCI_ARBITER_PCIREQ1 | + RCAR_PCI_ARBITER_PCIBP_MODE; + iowrite32(val, reg + RCAR_PCI_ARBITER_CTR_REG); + + /* PCI-AHB mapping */ + iowrite32(window_addr | RCAR_PCIAHB_PREFETCH16, + reg + RCAR_PCIAHB_WIN1_CTR_REG); + + /* AHB-PCI mapping: OHCI/EHCI registers */ + val = priv->mem_res.start | RCAR_AHBPCI_WIN_CTR_MEM; + iowrite32(val, reg + RCAR_AHBPCI_WIN2_CTR_REG); + + /* Enable AHB-PCI bridge PCI configuration access */ + iowrite32(RCAR_AHBPCI_WIN1_HOST | RCAR_AHBPCI_WIN_CTR_CFG, + reg + RCAR_AHBPCI_WIN1_CTR_REG); + /* Set PCI-AHB Window1 address */ + iowrite32(window_pci | PCI_BASE_ADDRESS_MEM_PREFETCH, + reg + PCI_BASE_ADDRESS_1); + /* Set AHB-PCI bridge PCI communication area address */ + val = priv->cfg_res->start + RCAR_AHBPCI_PCICOM_OFFSET; + iowrite32(val, reg + PCI_BASE_ADDRESS_0); + + val = ioread32(reg + PCI_COMMAND); + val |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + iowrite32(val, reg + PCI_COMMAND); + + /* Enable PCI interrupts */ + iowrite32(RCAR_PCI_INT_A | RCAR_PCI_INT_B | RCAR_PCI_INT_PME, + reg + RCAR_PCI_INT_ENABLE_REG); + + rcar_pci_setup_errirq(priv); +} + +static struct pci_ops rcar_pci_ops = { + .map_bus = rcar_pci_cfg_base, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +static int rcar_pci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *cfg_res, *mem_res; + struct rcar_pci *priv; + struct pci_host_bridge *bridge; + void __iomem *reg; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); + if (!bridge) + return -ENOMEM; + + priv = pci_host_bridge_priv(bridge); + bridge->sysdata = priv; + + cfg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(dev, cfg_res); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!mem_res || !mem_res->start) + return -ENODEV; + + if (mem_res->start & 0xFFFF) + return -EINVAL; + + priv->mem_res = *mem_res; + priv->cfg_res = cfg_res; + + priv->irq = platform_get_irq(pdev, 0); + priv->reg = reg; + priv->dev = dev; + + if (priv->irq < 0) { + dev_err(dev, "no valid irq found\n"); + return priv->irq; + } + + bridge->ops = &rcar_pci_ops; + + pci_add_flags(PCI_REASSIGN_ALL_BUS); + + rcar_pci_setup(priv); + + return pci_host_probe(bridge); +} + +static const struct of_device_id rcar_pci_of_match[] = { + { .compatible = "renesas,pci-r8a7790", }, + { .compatible = "renesas,pci-r8a7791", }, + { .compatible = "renesas,pci-r8a7794", }, + { .compatible = "renesas,pci-rcar-gen2", }, + { .compatible = "renesas,pci-rzn1", }, + { }, +}; + +static struct platform_driver rcar_pci_driver = { + .driver = { + .name = "pci-rcar-gen2", + .suppress_bind_attrs = true, + .of_match_table = rcar_pci_of_match, + }, + .probe = rcar_pci_probe, +}; +builtin_platform_driver(rcar_pci_driver); -- cgit v1.2.3