From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pci/controller/pci-thunder-ecam.c | 363 ++++++++++++++++++++++++++++++ 1 file changed, 363 insertions(+) create mode 100644 drivers/pci/controller/pci-thunder-ecam.c (limited to 'drivers/pci/controller/pci-thunder-ecam.c') diff --git a/drivers/pci/controller/pci-thunder-ecam.c b/drivers/pci/controller/pci-thunder-ecam.c new file mode 100644 index 000000000..b5bd10a62 --- /dev/null +++ b/drivers/pci/controller/pci-thunder-ecam.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015, 2016 Cavium, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_PCI_HOST_THUNDER_ECAM) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)) + +static void set_val(u32 v, int where, int size, u32 *val) +{ + int shift = (where & 3) * 8; + + pr_debug("set_val %04x: %08x\n", (unsigned int)(where & ~3), v); + v >>= shift; + if (size == 1) + v &= 0xff; + else if (size == 2) + v &= 0xffff; + *val = v; +} + +static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *val) +{ + void __iomem *addr; + u32 v; + + /* Entries are 16-byte aligned; bits[2,3] select word in entry */ + int where_a = where & 0xc; + + if (where_a == 0) { + set_val(e0, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0x4) { + addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */ + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + v = readl(addr); + v &= ~0xf; + v |= 2; /* EA entry-1. Base-L */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0x8) { + u32 barl_orig; + u32 barl_rb; + + addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */ + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + barl_orig = readl(addr + 0); + writel(0xffffffff, addr + 0); + barl_rb = readl(addr + 0); + writel(barl_orig, addr + 0); + /* zeros in unsettable bits */ + v = ~barl_rb & ~3; + v |= 0xc; /* EA entry-2. Offset-L */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc) { + addr = bus->ops->map_bus(bus, devfn, bar + 4); /* BAR 1 */ + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + v = readl(addr); /* EA entry-3. Base-H */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int thunder_ecam_p2_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct pci_config_window *cfg = bus->sysdata; + int where_a = where & ~3; + void __iomem *addr; + u32 node_bits; + u32 v; + + /* EA Base[63:32] may be missing some bits ... */ + switch (where_a) { + case 0xa8: + case 0xbc: + case 0xd0: + case 0xe4: + break; + default: + return pci_generic_config_read(bus, devfn, where, size, val); + } + + addr = bus->ops->map_bus(bus, devfn, where_a); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + v = readl(addr); + + /* + * Bit 44 of the 64-bit Base must match the same bit in + * the config space access window. Since we are working with + * the high-order 32 bits, shift everything down by 32 bits. + */ + node_bits = upper_32_bits(cfg->res.start) & (1 << 12); + + v |= node_bits; + set_val(v, where, size, val); + + return PCIBIOS_SUCCESSFUL; +} + +static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 v; + u32 vendor_device; + u32 class_rev; + void __iomem *addr; + int cfg_type; + int where_a = where & ~3; + + addr = bus->ops->map_bus(bus, devfn, 0xc); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + v = readl(addr); + + /* Check for non type-00 header */ + cfg_type = (v >> 16) & 0x7f; + + addr = bus->ops->map_bus(bus, devfn, 8); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + class_rev = readl(addr); + if (class_rev == 0xffffffff) + goto no_emulation; + + if ((class_rev & 0xff) >= 8) { + /* Pass-2 handling */ + if (cfg_type) + goto no_emulation; + return thunder_ecam_p2_config_read(bus, devfn, where, + size, val); + } + + /* + * All BARs have fixed addresses specified by the EA + * capability; they must return zero on read. + */ + if (cfg_type == 0 && + ((where >= 0x10 && where < 0x2c) || + (where >= 0x1a4 && where < 0x1bc))) { + /* BAR or SR-IOV BAR */ + *val = 0; + return PCIBIOS_SUCCESSFUL; + } + + addr = bus->ops->map_bus(bus, devfn, 0); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + vendor_device = readl(addr); + if (vendor_device == 0xffffffff) + goto no_emulation; + + pr_debug("%04x:%04x - Fix pass#: %08x, where: %03x, devfn: %03x\n", + vendor_device & 0xffff, vendor_device >> 16, class_rev, + (unsigned int)where, devfn); + + /* Check for non type-00 header */ + if (cfg_type == 0) { + bool has_msix; + bool is_nic = (vendor_device == 0xa01e177d); + bool is_tns = (vendor_device == 0xa01f177d); + + addr = bus->ops->map_bus(bus, devfn, 0x70); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* E_CAP */ + v = readl(addr); + has_msix = (v & 0xff00) != 0; + + if (!has_msix && where_a == 0x70) { + v |= 0xbc00; /* next capability is EA at 0xbc */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xb0) { + addr = bus->ops->map_bus(bus, devfn, where_a); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + v = readl(addr); + if (v & 0xff00) + pr_err("Bad MSIX cap header: %08x\n", v); + v |= 0xbc00; /* next capability is EA at 0xbc */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xbc) { + if (is_nic) + v = 0x40014; /* EA last in chain, 4 entries */ + else if (is_tns) + v = 0x30014; /* EA last in chain, 3 entries */ + else if (has_msix) + v = 0x20014; /* EA last in chain, 2 entries */ + else + v = 0x10014; /* EA last in chain, 1 entry */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a >= 0xc0 && where_a < 0xd0) + /* EA entry-0. PP=0, BAR0 Size:3 */ + return handle_ea_bar(0x80ff0003, + 0x10, bus, devfn, where, + size, val); + if (where_a >= 0xd0 && where_a < 0xe0 && has_msix) + /* EA entry-1. PP=0, BAR4 Size:3 */ + return handle_ea_bar(0x80ff0043, + 0x20, bus, devfn, where, + size, val); + if (where_a >= 0xe0 && where_a < 0xf0 && is_tns) + /* EA entry-2. PP=0, BAR2, Size:3 */ + return handle_ea_bar(0x80ff0023, + 0x18, bus, devfn, where, + size, val); + if (where_a >= 0xe0 && where_a < 0xf0 && is_nic) + /* EA entry-2. PP=4, VF_BAR0 (9), Size:3 */ + return handle_ea_bar(0x80ff0493, + 0x1a4, bus, devfn, where, + size, val); + if (where_a >= 0xf0 && where_a < 0x100 && is_nic) + /* EA entry-3. PP=4, VF_BAR4 (d), Size:3 */ + return handle_ea_bar(0x80ff04d3, + 0x1b4, bus, devfn, where, + size, val); + } else if (cfg_type == 1) { + bool is_rsl_bridge = devfn == 0x08; + bool is_rad_bridge = devfn == 0xa0; + bool is_zip_bridge = devfn == 0xa8; + bool is_dfa_bridge = devfn == 0xb0; + bool is_nic_bridge = devfn == 0x10; + + if (where_a == 0x70) { + addr = bus->ops->map_bus(bus, devfn, where_a); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + v = readl(addr); + if (v & 0xff00) + pr_err("Bad PCIe cap header: %08x\n", v); + v |= 0xbc00; /* next capability is EA at 0xbc */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xbc) { + if (is_nic_bridge) + v = 0x10014; /* EA last in chain, 1 entry */ + else + v = 0x00014; /* EA last in chain, no entries */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc0) { + if (is_rsl_bridge || is_nic_bridge) + v = 0x0101; /* subordinate:secondary = 1:1 */ + else if (is_rad_bridge) + v = 0x0202; /* subordinate:secondary = 2:2 */ + else if (is_zip_bridge) + v = 0x0303; /* subordinate:secondary = 3:3 */ + else if (is_dfa_bridge) + v = 0x0404; /* subordinate:secondary = 4:4 */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc4 && is_nic_bridge) { + /* Enabled, not-Write, SP=ff, PP=05, BEI=6, ES=4 */ + v = 0x80ff0564; + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc8 && is_nic_bridge) { + v = 0x00000002; /* Base-L 64-bit */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xcc && is_nic_bridge) { + v = 0xfffffffe; /* MaxOffset-L 64-bit */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xd0 && is_nic_bridge) { + v = 0x00008430; /* NIC Base-H */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xd4 && is_nic_bridge) { + v = 0x0000000f; /* MaxOffset-H */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + } +no_emulation: + return pci_generic_config_read(bus, devfn, where, size, val); +} + +static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + /* + * All BARs have fixed addresses; ignore BAR writes so they + * don't get corrupted. + */ + if ((where >= 0x10 && where < 0x2c) || + (where >= 0x1a4 && where < 0x1bc)) + /* BAR or SR-IOV BAR */ + return PCIBIOS_SUCCESSFUL; + + return pci_generic_config_write(bus, devfn, where, size, val); +} + +const struct pci_ecam_ops pci_thunder_ecam_ops = { + .pci_ops = { + .map_bus = pci_ecam_map_bus, + .read = thunder_ecam_config_read, + .write = thunder_ecam_config_write, + } +}; + +#ifdef CONFIG_PCI_HOST_THUNDER_ECAM + +static const struct of_device_id thunder_ecam_of_match[] = { + { + .compatible = "cavium,pci-host-thunder-ecam", + .data = &pci_thunder_ecam_ops, + }, + { }, +}; + +static struct platform_driver thunder_ecam_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = thunder_ecam_of_match, + .suppress_bind_attrs = true, + }, + .probe = pci_host_common_probe, +}; +builtin_platform_driver(thunder_ecam_driver); + +#endif +#endif -- cgit v1.2.3