From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pci/ecam.c | 233 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100644 drivers/pci/ecam.c (limited to 'drivers/pci/ecam.c') diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c new file mode 100644 index 000000000..1c40d2506 --- /dev/null +++ b/drivers/pci/ecam.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2016 Broadcom + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * On 64-bit systems, we do a single ioremap for the whole config space + * since we have enough virtual address range available. On 32-bit, we + * ioremap the config space for each bus individually. + */ +static const bool per_bus_mapping = !IS_ENABLED(CONFIG_64BIT); + +/* + * Create a PCI config space window + * - reserve mem region + * - alloc struct pci_config_window with space for all mappings + * - ioremap the config space + */ +struct pci_config_window *pci_ecam_create(struct device *dev, + struct resource *cfgres, struct resource *busr, + const struct pci_ecam_ops *ops) +{ + unsigned int bus_shift = ops->bus_shift; + struct pci_config_window *cfg; + unsigned int bus_range, bus_range_max, bsz; + struct resource *conflict; + int err; + + if (busr->start > busr->end) + return ERR_PTR(-EINVAL); + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return ERR_PTR(-ENOMEM); + + /* ECAM-compliant platforms need not supply ops->bus_shift */ + if (!bus_shift) + bus_shift = PCIE_ECAM_BUS_SHIFT; + + cfg->parent = dev; + cfg->ops = ops; + cfg->busr.start = busr->start; + cfg->busr.end = busr->end; + cfg->busr.flags = IORESOURCE_BUS; + cfg->bus_shift = bus_shift; + bus_range = resource_size(&cfg->busr); + bus_range_max = resource_size(cfgres) >> bus_shift; + if (bus_range > bus_range_max) { + bus_range = bus_range_max; + cfg->busr.end = busr->start + bus_range - 1; + dev_warn(dev, "ECAM area %pR can only accommodate %pR (reduced from %pR desired)\n", + cfgres, &cfg->busr, busr); + } + bsz = 1 << bus_shift; + + cfg->res.start = cfgres->start; + cfg->res.end = cfgres->end; + cfg->res.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + cfg->res.name = "PCI ECAM"; + + conflict = request_resource_conflict(&iomem_resource, &cfg->res); + if (conflict) { + err = -EBUSY; + dev_err(dev, "can't claim ECAM area %pR: address conflict with %s %pR\n", + &cfg->res, conflict->name, conflict); + goto err_exit; + } + + if (per_bus_mapping) { + cfg->winp = kcalloc(bus_range, sizeof(*cfg->winp), GFP_KERNEL); + if (!cfg->winp) + goto err_exit_malloc; + } else { + cfg->win = pci_remap_cfgspace(cfgres->start, bus_range * bsz); + if (!cfg->win) + goto err_exit_iomap; + } + + if (ops->init) { + err = ops->init(cfg); + if (err) + goto err_exit; + } + dev_info(dev, "ECAM at %pR for %pR\n", &cfg->res, &cfg->busr); + return cfg; + +err_exit_iomap: + dev_err(dev, "ECAM ioremap failed\n"); +err_exit_malloc: + err = -ENOMEM; +err_exit: + pci_ecam_free(cfg); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(pci_ecam_create); + +void pci_ecam_free(struct pci_config_window *cfg) +{ + int i; + + if (per_bus_mapping) { + if (cfg->winp) { + for (i = 0; i < resource_size(&cfg->busr); i++) + if (cfg->winp[i]) + iounmap(cfg->winp[i]); + kfree(cfg->winp); + } + } else { + if (cfg->win) + iounmap(cfg->win); + } + if (cfg->res.parent) + release_resource(&cfg->res); + kfree(cfg); +} +EXPORT_SYMBOL_GPL(pci_ecam_free); + +static int pci_ecam_add_bus(struct pci_bus *bus) +{ + struct pci_config_window *cfg = bus->sysdata; + unsigned int bsz = 1 << cfg->bus_shift; + unsigned int busn = bus->number; + phys_addr_t start; + + if (!per_bus_mapping) + return 0; + + if (busn < cfg->busr.start || busn > cfg->busr.end) + return -EINVAL; + + busn -= cfg->busr.start; + start = cfg->res.start + busn * bsz; + + cfg->winp[busn] = pci_remap_cfgspace(start, bsz); + if (!cfg->winp[busn]) + return -ENOMEM; + + return 0; +} + +static void pci_ecam_remove_bus(struct pci_bus *bus) +{ + struct pci_config_window *cfg = bus->sysdata; + unsigned int busn = bus->number; + + if (!per_bus_mapping || busn < cfg->busr.start || busn > cfg->busr.end) + return; + + busn -= cfg->busr.start; + if (cfg->winp[busn]) { + iounmap(cfg->winp[busn]); + cfg->winp[busn] = NULL; + } +} + +/* + * Function to implement the pci_ops ->map_bus method + */ +void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn, + int where) +{ + struct pci_config_window *cfg = bus->sysdata; + unsigned int bus_shift = cfg->ops->bus_shift; + unsigned int devfn_shift = cfg->ops->bus_shift - 8; + unsigned int busn = bus->number; + void __iomem *base; + u32 bus_offset, devfn_offset; + + if (busn < cfg->busr.start || busn > cfg->busr.end) + return NULL; + + busn -= cfg->busr.start; + if (per_bus_mapping) { + base = cfg->winp[busn]; + busn = 0; + } else + base = cfg->win; + + if (cfg->ops->bus_shift) { + bus_offset = (busn & PCIE_ECAM_BUS_MASK) << bus_shift; + devfn_offset = (devfn & PCIE_ECAM_DEVFN_MASK) << devfn_shift; + where &= PCIE_ECAM_REG_MASK; + + return base + (bus_offset | devfn_offset | where); + } + + return base + PCIE_ECAM_OFFSET(busn, devfn, where); +} +EXPORT_SYMBOL_GPL(pci_ecam_map_bus); + +/* ECAM ops */ +const struct pci_ecam_ops pci_generic_ecam_ops = { + .pci_ops = { + .add_bus = pci_ecam_add_bus, + .remove_bus = pci_ecam_remove_bus, + .map_bus = pci_ecam_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, + } +}; +EXPORT_SYMBOL_GPL(pci_generic_ecam_ops); + +#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) +/* ECAM ops for 32-bit access only (non-compliant) */ +const struct pci_ecam_ops pci_32b_ops = { + .pci_ops = { + .add_bus = pci_ecam_add_bus, + .remove_bus = pci_ecam_remove_bus, + .map_bus = pci_ecam_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, + } +}; + +/* ECAM ops for 32-bit read only (non-compliant) */ +const struct pci_ecam_ops pci_32b_read_ops = { + .pci_ops = { + .add_bus = pci_ecam_add_bus, + .remove_bus = pci_ecam_remove_bus, + .map_bus = pci_ecam_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write, + } +}; +#endif -- cgit v1.2.3