From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/perf/Kconfig | 206 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 drivers/perf/Kconfig (limited to 'drivers/perf/Kconfig') diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig new file mode 100644 index 000000000..66c259000 --- /dev/null +++ b/drivers/perf/Kconfig @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Performance Monitor Drivers +# + +menu "Performance monitor support" + depends on PERF_EVENTS + +config ARM_CCI_PMU + tristate "ARM CCI PMU driver" + depends on (ARM && CPU_V7) || ARM64 + select ARM_CCI + help + Support for PMU events monitoring on the ARM CCI (Cache Coherent + Interconnect) family of products. + + If compiled as a module, it will be called arm-cci. + +config ARM_CCI400_PMU + bool "support CCI-400" + default y + depends on ARM_CCI_PMU + select ARM_CCI400_COMMON + help + CCI-400 provides 4 independent event counters counting events related + to the connected slave/master interfaces, plus a cycle counter. + +config ARM_CCI5xx_PMU + bool "support CCI-500/CCI-550" + default y + depends on ARM_CCI_PMU + help + CCI-500/CCI-550 both provide 8 independent event counters, which can + count events pertaining to the slave/master interfaces as well as the + internal events to the CCI. + +config ARM_CCN + tristate "ARM CCN driver support" + depends on ARM || ARM64 || COMPILE_TEST + help + PMU (perf) driver supporting the ARM CCN (Cache Coherent Network) + interconnect. + +config ARM_CMN + tristate "Arm CMN-600 PMU support" + depends on ARM64 || COMPILE_TEST + help + Support for PMU events monitoring on the Arm CMN-600 Coherent Mesh + Network interconnect. + +config ARM_PMU + depends on ARM || ARM64 + bool "ARM PMU framework" + default y + help + Say y if you want to use CPU performance monitors on ARM-based + systems. + +config RISCV_PMU + depends on RISCV + bool "RISC-V PMU framework" + default y + help + Say y if you want to use CPU performance monitors on RISCV-based + systems. This provides the core PMU framework that abstracts common + PMU functionalities in a core library so that different PMU drivers + can reuse it. + +config RISCV_PMU_LEGACY + depends on RISCV_PMU + bool "RISC-V legacy PMU implementation" + default y + help + Say y if you want to use the legacy CPU performance monitor + implementation on RISC-V based systems. This only allows counting + of cycle/instruction counter and doesn't support counter overflow, + or programmable counters. It will be removed in future. + +config RISCV_PMU_SBI + depends on RISCV_PMU && RISCV_SBI + bool "RISC-V PMU based on SBI PMU extension" + default y + help + Say y if you want to use the CPU performance monitor + using SBI PMU extension on RISC-V based systems. This option provides + full perf feature support i.e. counter overflow, privilege mode + filtering, counter configuration. + +config ARM_PMU_ACPI + depends on ARM_PMU && ACPI + def_bool y + +config ARM_SMMU_V3_PMU + tristate "ARM SMMUv3 Performance Monitors Extension" + depends on (ARM64 && ACPI) || (COMPILE_TEST && 64BIT) + depends on GENERIC_MSI_IRQ + help + Provides support for the ARM SMMUv3 Performance Monitor Counter + Groups (PMCG), which provide monitoring of transactions passing + through the SMMU and allow the resulting information to be filtered + based on the Stream ID of the corresponding master. + +config ARM_DSU_PMU + tristate "ARM DynamIQ Shared Unit (DSU) PMU" + depends on ARM64 + help + Provides support for performance monitor unit in ARM DynamIQ Shared + Unit (DSU). The DSU integrates one or more cores with an L3 memory + system, control logic. The PMU allows counting various events related + to DSU. + +config FSL_IMX8_DDR_PMU + tristate "Freescale i.MX8 DDR perf monitor" + depends on ARCH_MXC || COMPILE_TEST + help + Provides support for the DDR performance monitor in i.MX8, which + can give information about memory throughput and other related + events. + +config QCOM_L2_PMU + bool "Qualcomm Technologies L2-cache PMU" + depends on ARCH_QCOM && ARM64 && ACPI + select QCOM_KRYO_L2_ACCESSORS + help + Provides support for the L2 cache performance monitor unit (PMU) + in Qualcomm Technologies processors. + Adds the L2 cache PMU into the perf events subsystem for + monitoring L2 cache events. + +config QCOM_L3_PMU + bool "Qualcomm Technologies L3-cache PMU" + depends on ARCH_QCOM && ARM64 && ACPI + select QCOM_IRQ_COMBINER + help + Provides support for the L3 cache performance monitor unit (PMU) + in Qualcomm Technologies processors. + Adds the L3 cache PMU into the perf events subsystem for + monitoring L3 cache events. + +config THUNDERX2_PMU + tristate "Cavium ThunderX2 SoC PMU UNCORE" + depends on ARCH_THUNDER2 || COMPILE_TEST + depends on NUMA && ACPI + default m + help + Provides support for ThunderX2 UNCORE events. + The SoC has PMU support in its L3 cache controller (L3C) and + in the DDR4 Memory Controller (DMC). + +config XGENE_PMU + depends on ARCH_XGENE || (COMPILE_TEST && 64BIT) + bool "APM X-Gene SoC PMU" + default n + help + Say y if you want to use APM X-Gene SoC performance monitors. + +config ARM_SPE_PMU + tristate "Enable support for the ARMv8.2 Statistical Profiling Extension" + depends on ARM64 + help + Enable perf support for the ARMv8.2 Statistical Profiling + Extension, which provides periodic sampling of operations in + the CPU pipeline and reports this via the perf AUX interface. + +config ARM_DMC620_PMU + tristate "Enable PMU support for the ARM DMC-620 memory controller" + depends on (ARM64 && ACPI) || COMPILE_TEST + help + Support for PMU events monitoring on the ARM DMC-620 memory + controller. + +config MARVELL_CN10K_TAD_PMU + tristate "Marvell CN10K LLC-TAD PMU" + depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT) + help + Provides support for Last-Level cache Tag-and-data Units (LLC-TAD) + performance monitors on CN10K family silicons. + +config APPLE_M1_CPU_PMU + bool "Apple M1 CPU PMU support" + depends on ARM_PMU && ARCH_APPLE + help + Provides support for the non-architectural CPU PMUs present on + the Apple M1 SoCs and derivatives. + +config ALIBABA_UNCORE_DRW_PMU + tristate "Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver" + depends on (ARM64 && ACPI) || COMPILE_TEST + help + Support for Driveway PMU events monitoring on Yitian 710 DDR + Sub-system. + +source "drivers/perf/hisilicon/Kconfig" + +config MARVELL_CN10K_DDR_PMU + tristate "Enable MARVELL CN10K DRAM Subsystem(DSS) PMU Support" + depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT) + help + Enable perf support for Marvell DDR Performance monitoring + event on CN10K platform. + +source "drivers/perf/arm_cspmu/Kconfig" + +source "drivers/perf/amlogic/Kconfig" + +endmenu -- cgit v1.2.3