From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 270 +++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-utmi.c (limited to 'drivers/phy/marvell/phy-mvebu-a3700-utmi.c') diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c new file mode 100644 index 000000000..8834436bc --- /dev/null +++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell + * + * Authors: + * Igal Liberman + * Miquèl Raynal + * + * Marvell A3700 UTMI PHY driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Armada 3700 UTMI PHY registers */ +#define USB2_PHY_PLL_CTRL_REG0 0x0 +#define PLL_REF_DIV_OFF 0 +#define PLL_REF_DIV_MASK GENMASK(6, 0) +#define PLL_REF_DIV_5 5 +#define PLL_FB_DIV_OFF 16 +#define PLL_FB_DIV_MASK GENMASK(24, 16) +#define PLL_FB_DIV_96 96 +#define PLL_SEL_LPFR_OFF 28 +#define PLL_SEL_LPFR_MASK GENMASK(29, 28) +#define PLL_READY BIT(31) +#define USB2_PHY_CAL_CTRL 0x8 +#define PHY_PLLCAL_DONE BIT(31) +#define PHY_IMPCAL_DONE BIT(23) +#define USB2_RX_CHAN_CTRL1 0x18 +#define USB2PHY_SQCAL_DONE BIT(31) +#define USB2_PHY_OTG_CTRL 0x34 +#define PHY_PU_OTG BIT(4) +#define USB2_PHY_CHRGR_DETECT 0x38 +#define PHY_CDP_EN BIT(2) +#define PHY_DCP_EN BIT(3) +#define PHY_PD_EN BIT(4) +#define PHY_PU_CHRG_DTC BIT(5) +#define PHY_CDP_DM_AUTO BIT(7) +#define PHY_ENSWITCH_DP BIT(12) +#define PHY_ENSWITCH_DM BIT(13) + +/* Armada 3700 USB miscellaneous registers */ +#define USB2_PHY_CTRL(usb32) (usb32 ? 0x20 : 0x4) +#define RB_USB2PHY_PU BIT(0) +#define USB2_DP_PULLDN_DEV_MODE BIT(5) +#define USB2_DM_PULLDN_DEV_MODE BIT(6) +#define RB_USB2PHY_SUSPM(usb32) (usb32 ? BIT(14) : BIT(7)) + +#define PLL_LOCK_DELAY_US 10000 +#define PLL_LOCK_TIMEOUT_US 1000000 + +/** + * struct mvebu_a3700_utmi_caps - PHY capabilities + * + * @usb32: Flag indicating which PHY is in use (impacts the register map): + * - The UTMI PHY wired to the USB3/USB2 controller (otg) + * - The UTMI PHY wired to the USB2 controller (host only) + * @ops: PHY operations + */ +struct mvebu_a3700_utmi_caps { + int usb32; + const struct phy_ops *ops; +}; + +/** + * struct mvebu_a3700_utmi - PHY driver data + * + * @regs: PHY registers + * @usb_misc: Regmap with USB miscellaneous registers including PHY ones + * @caps: PHY capabilities + * @phy: PHY handle + */ +struct mvebu_a3700_utmi { + void __iomem *regs; + struct regmap *usb_misc; + const struct mvebu_a3700_utmi_caps *caps; + struct phy *phy; +}; + +static int mvebu_a3700_utmi_phy_power_on(struct phy *phy) +{ + struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy); + struct device *dev = &phy->dev; + int usb32 = utmi->caps->usb32; + int ret = 0; + u32 reg; + + /* + * Setup PLL. 40MHz clock used to be the default, being 25MHz now. + * See "PLL Settings for Typical REFCLK" table. + */ + reg = readl(utmi->regs + USB2_PHY_PLL_CTRL_REG0); + reg &= ~(PLL_REF_DIV_MASK | PLL_FB_DIV_MASK | PLL_SEL_LPFR_MASK); + reg |= (PLL_REF_DIV_5 << PLL_REF_DIV_OFF) | + (PLL_FB_DIV_96 << PLL_FB_DIV_OFF); + writel(reg, utmi->regs + USB2_PHY_PLL_CTRL_REG0); + + /* Enable PHY pull up and disable USB2 suspend */ + regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32), + RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU, + RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU); + + if (usb32) { + /* Power up OTG module */ + reg = readl(utmi->regs + USB2_PHY_OTG_CTRL); + reg |= PHY_PU_OTG; + writel(reg, utmi->regs + USB2_PHY_OTG_CTRL); + + /* Disable PHY charger detection */ + reg = readl(utmi->regs + USB2_PHY_CHRGR_DETECT); + reg &= ~(PHY_CDP_EN | PHY_DCP_EN | PHY_PD_EN | PHY_PU_CHRG_DTC | + PHY_CDP_DM_AUTO | PHY_ENSWITCH_DP | PHY_ENSWITCH_DM); + writel(reg, utmi->regs + USB2_PHY_CHRGR_DETECT); + + /* Disable PHY DP/DM pull-down (used for device mode) */ + regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32), + USB2_DP_PULLDN_DEV_MODE | + USB2_DM_PULLDN_DEV_MODE, 0); + } + + /* Wait for PLL calibration */ + ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg, + reg & PHY_PLLCAL_DONE, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) { + dev_err(dev, "Failed to end USB2 PLL calibration\n"); + return ret; + } + + /* Wait for impedance calibration */ + ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg, + reg & PHY_IMPCAL_DONE, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) { + dev_err(dev, "Failed to end USB2 impedance calibration\n"); + return ret; + } + + /* Wait for squelch calibration */ + ret = readl_poll_timeout(utmi->regs + USB2_RX_CHAN_CTRL1, reg, + reg & USB2PHY_SQCAL_DONE, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) { + dev_err(dev, "Failed to end USB2 unknown calibration\n"); + return ret; + } + + /* Wait for PLL to be locked */ + ret = readl_poll_timeout(utmi->regs + USB2_PHY_PLL_CTRL_REG0, reg, + reg & PLL_READY, + PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US); + if (ret) + dev_err(dev, "Failed to lock USB2 PLL\n"); + + return ret; +} + +static int mvebu_a3700_utmi_phy_power_off(struct phy *phy) +{ + struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy); + int usb32 = utmi->caps->usb32; + u32 reg; + + /* Disable PHY pull-up and enable USB2 suspend */ + reg = readl(utmi->regs + USB2_PHY_CTRL(usb32)); + reg &= ~(RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32)); + writel(reg, utmi->regs + USB2_PHY_CTRL(usb32)); + + /* Power down OTG module */ + if (usb32) { + reg = readl(utmi->regs + USB2_PHY_OTG_CTRL); + reg &= ~PHY_PU_OTG; + writel(reg, utmi->regs + USB2_PHY_OTG_CTRL); + } + + return 0; +} + +static const struct phy_ops mvebu_a3700_utmi_phy_ops = { + .power_on = mvebu_a3700_utmi_phy_power_on, + .power_off = mvebu_a3700_utmi_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_otg_phy_caps = { + .usb32 = true, + .ops = &mvebu_a3700_utmi_phy_ops, +}; + +static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_host_phy_caps = { + .usb32 = false, + .ops = &mvebu_a3700_utmi_phy_ops, +}; + +static const struct of_device_id mvebu_a3700_utmi_of_match[] = { + { + .compatible = "marvell,a3700-utmi-otg-phy", + .data = &mvebu_a3700_utmi_otg_phy_caps, + }, + { + .compatible = "marvell,a3700-utmi-host-phy", + .data = &mvebu_a3700_utmi_host_phy_caps, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mvebu_a3700_utmi_of_match); + +static int mvebu_a3700_utmi_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mvebu_a3700_utmi *utmi; + struct phy_provider *provider; + + utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL); + if (!utmi) + return -ENOMEM; + + /* Get UTMI memory region */ + utmi->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(utmi->regs)) + return PTR_ERR(utmi->regs); + + /* Get miscellaneous Host/PHY region */ + utmi->usb_misc = syscon_regmap_lookup_by_phandle(dev->of_node, + "marvell,usb-misc-reg"); + if (IS_ERR(utmi->usb_misc)) { + dev_err(dev, + "Missing USB misc purpose system controller\n"); + return PTR_ERR(utmi->usb_misc); + } + + /* Retrieve PHY capabilities */ + utmi->caps = of_device_get_match_data(dev); + + /* Instantiate the PHY */ + utmi->phy = devm_phy_create(dev, NULL, utmi->caps->ops); + if (IS_ERR(utmi->phy)) { + dev_err(dev, "Failed to create the UTMI PHY\n"); + return PTR_ERR(utmi->phy); + } + + phy_set_drvdata(utmi->phy, utmi); + + /* Ensure the PHY is powered off */ + utmi->caps->ops->power_off(utmi->phy); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static struct platform_driver mvebu_a3700_utmi_driver = { + .probe = mvebu_a3700_utmi_phy_probe, + .driver = { + .name = "mvebu-a3700-utmi-phy", + .of_match_table = mvebu_a3700_utmi_of_match, + }, +}; +module_platform_driver(mvebu_a3700_utmi_driver); + +MODULE_AUTHOR("Igal Liberman "); +MODULE_AUTHOR("Miquel Raynal "); +MODULE_DESCRIPTION("Marvell EBU A3700 UTMI PHY driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3