From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c | 177 +++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c (limited to 'drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c') diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c new file mode 100644 index 000000000..f021ec5a7 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + * Author: jitao.shi + */ + +#include "phy-mtk-io.h" +#include "phy-mtk-mipi-dsi.h" + +#define MIPITX_LANE_CON 0x000c +#define RG_DSI_CPHY_T1DRV_EN BIT(0) +#define RG_DSI_ANA_CK_SEL BIT(1) +#define RG_DSI_PHY_CK_SEL BIT(2) +#define RG_DSI_CPHY_EN BIT(3) +#define RG_DSI_PHYCK_INV_EN BIT(4) +#define RG_DSI_PWR04_EN BIT(5) +#define RG_DSI_BG_LPF_EN BIT(6) +#define RG_DSI_BG_CORE_EN BIT(7) +#define RG_DSI_PAD_TIEL_SEL BIT(8) + +#define MIPITX_VOLTAGE_SEL 0x0010 +#define RG_DSI_HSTX_LDO_REF_SEL GENMASK(9, 6) + +#define MIPITX_PLL_PWR 0x0028 +#define MIPITX_PLL_CON0 0x002c +#define MIPITX_PLL_CON1 0x0030 +#define MIPITX_PLL_CON2 0x0034 +#define MIPITX_PLL_CON3 0x0038 +#define MIPITX_PLL_CON4 0x003c +#define RG_DSI_PLL_IBIAS GENMASK(11, 10) + +#define MIPITX_D2P_RTCODE 0x0100 +#define MIPITX_D2_SW_CTL_EN 0x0144 +#define MIPITX_D0_SW_CTL_EN 0x0244 +#define MIPITX_CK_CKMODE_EN 0x0328 +#define DSI_CK_CKMODE_EN BIT(0) +#define MIPITX_CK_SW_CTL_EN 0x0344 +#define MIPITX_D1_SW_CTL_EN 0x0444 +#define MIPITX_D3_SW_CTL_EN 0x0544 +#define DSI_SW_CTL_EN BIT(0) +#define AD_DSI_PLL_SDM_PWR_ON BIT(0) +#define AD_DSI_PLL_SDM_ISO_EN BIT(1) + +#define RG_DSI_PLL_EN BIT(4) +#define RG_DSI_PLL_POSDIV GENMASK(10, 8) + +static int mtk_mipi_tx_pll_enable(struct clk_hw *hw) +{ + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); + void __iomem *base = mipi_tx->regs; + unsigned int txdiv, txdiv0; + u64 pcw; + + dev_dbg(mipi_tx->dev, "enable: %u bps\n", mipi_tx->data_rate); + + if (mipi_tx->data_rate >= 2000000000) { + txdiv = 1; + txdiv0 = 0; + } else if (mipi_tx->data_rate >= 1000000000) { + txdiv = 2; + txdiv0 = 1; + } else if (mipi_tx->data_rate >= 500000000) { + txdiv = 4; + txdiv0 = 2; + } else if (mipi_tx->data_rate > 250000000) { + txdiv = 8; + txdiv0 = 3; + } else if (mipi_tx->data_rate >= 125000000) { + txdiv = 16; + txdiv0 = 4; + } else { + return -EINVAL; + } + + mtk_phy_clear_bits(base + MIPITX_PLL_CON4, RG_DSI_PLL_IBIAS); + + mtk_phy_set_bits(base + MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON); + mtk_phy_clear_bits(base + MIPITX_PLL_CON1, RG_DSI_PLL_EN); + udelay(1); + mtk_phy_clear_bits(base + MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN); + pcw = div_u64(((u64)mipi_tx->data_rate * txdiv) << 24, 26000000); + writel(pcw, base + MIPITX_PLL_CON0); + mtk_phy_update_field(base + MIPITX_PLL_CON1, RG_DSI_PLL_POSDIV, txdiv0); + mtk_phy_set_bits(base + MIPITX_PLL_CON1, RG_DSI_PLL_EN); + + return 0; +} + +static void mtk_mipi_tx_pll_disable(struct clk_hw *hw) +{ + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); + void __iomem *base = mipi_tx->regs; + + mtk_phy_clear_bits(base + MIPITX_PLL_CON1, RG_DSI_PLL_EN); + + mtk_phy_set_bits(base + MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN); + mtk_phy_clear_bits(base + MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON); +} + +static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + return clamp_val(rate, 50000000, 1600000000); +} + +static const struct clk_ops mtk_mipi_tx_pll_ops = { + .enable = mtk_mipi_tx_pll_enable, + .disable = mtk_mipi_tx_pll_disable, + .round_rate = mtk_mipi_tx_pll_round_rate, + .set_rate = mtk_mipi_tx_pll_set_rate, + .recalc_rate = mtk_mipi_tx_pll_recalc_rate, +}; + +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx) +{ + int i, j; + + for (i = 0; i < 5; i++) { + if ((mipi_tx->rt_code[i] & 0x1f) == 0) + mipi_tx->rt_code[i] |= 0x10; + + if ((mipi_tx->rt_code[i] >> 5 & 0x1f) == 0) + mipi_tx->rt_code[i] |= 0x10 << 5; + + for (j = 0; j < 10; j++) + mtk_phy_update_bits(mipi_tx->regs + + MIPITX_D2P_RTCODE * (i + 1) + j * 4, + 1, mipi_tx->rt_code[i] >> j & 1); + } +} + +static void mtk_mipi_tx_power_on_signal(struct phy *phy) +{ + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); + void __iomem *base = mipi_tx->regs; + + /* BG_LPF_EN / BG_CORE_EN */ + writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN, base + MIPITX_LANE_CON); + usleep_range(30, 100); + writel(RG_DSI_BG_CORE_EN | RG_DSI_BG_LPF_EN, base + MIPITX_LANE_CON); + + /* Switch OFF each Lane */ + mtk_phy_clear_bits(base + MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_clear_bits(base + MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_clear_bits(base + MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_clear_bits(base + MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_clear_bits(base + MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN); + + mtk_phy_update_field(base + MIPITX_VOLTAGE_SEL, RG_DSI_HSTX_LDO_REF_SEL, + (mipi_tx->mipitx_drive - 3000) / 200); + + mtk_mipi_tx_config_calibration_data(mipi_tx); + + mtk_phy_set_bits(base + MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN); +} + +static void mtk_mipi_tx_power_off_signal(struct phy *phy) +{ + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); + void __iomem *base = mipi_tx->regs; + + /* Switch ON each Lane */ + mtk_phy_set_bits(base + MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_set_bits(base + MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_set_bits(base + MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_set_bits(base + MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); + mtk_phy_set_bits(base + MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN); + + writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN, base + MIPITX_LANE_CON); + writel(RG_DSI_PAD_TIEL_SEL, base + MIPITX_LANE_CON); +} + +const struct mtk_mipitx_data mt8183_mipitx_data = { + .mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops, + .mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal, + .mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal, +}; -- cgit v1.2.3