From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5.h | 231 +++++++++++++++++++++ 1 file changed, 231 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5.h (limited to 'drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5.h') diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5.h new file mode 100644 index 000000000..fe8f3e330 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5.h @@ -0,0 +1,231 @@ + +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V5_H_ +#define QCOM_PHY_QMP_QSERDES_TXRX_V5_H_ + +/* Only for QMP V5 PHY - TX registers */ +#define QSERDES_V5_TX_BIST_MODE_LANENO 0x000 +#define QSERDES_V5_TX_BIST_INVERT 0x004 +#define QSERDES_V5_TX_CLKBUF_ENABLE 0x008 +#define QSERDES_V5_TX_TX_EMP_POST1_LVL 0x00c +#define QSERDES_V5_TX_TX_IDLE_LVL_LARGE_AMP 0x010 +#define QSERDES_V5_TX_TX_DRV_LVL 0x014 +#define QSERDES_V5_TX_TX_DRV_LVL_OFFSET 0x018 +#define QSERDES_V5_TX_RESET_TSYNC_EN 0x01c +#define QSERDES_V5_TX_PRE_STALL_LDO_BOOST_EN 0x020 +#define QSERDES_V5_TX_TX_BAND 0x024 +#define QSERDES_V5_TX_SLEW_CNTL 0x028 +#define QSERDES_V5_TX_INTERFACE_SELECT 0x02c +#define QSERDES_V5_TX_LPB_EN 0x030 +#define QSERDES_V5_TX_RES_CODE_LANE_TX 0x034 +#define QSERDES_V5_TX_RES_CODE_LANE_RX 0x038 +#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX 0x03c +#define QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX 0x040 +#define QSERDES_V5_TX_PERL_LENGTH1 0x044 +#define QSERDES_V5_TX_PERL_LENGTH2 0x048 +#define QSERDES_V5_TX_SERDES_BYP_EN_OUT 0x04c +#define QSERDES_V5_TX_DEBUG_BUS_SEL 0x050 +#define QSERDES_V5_TX_TRANSCEIVER_BIAS_EN 0x054 +#define QSERDES_V5_TX_HIGHZ_DRVR_EN 0x058 +#define QSERDES_V5_TX_TX_POL_INV 0x05c +#define QSERDES_V5_TX_PARRATE_REC_DETECT_IDLE_EN 0x060 +#define QSERDES_V5_TX_BIST_PATTERN1 0x064 +#define QSERDES_V5_TX_BIST_PATTERN2 0x068 +#define QSERDES_V5_TX_BIST_PATTERN3 0x06c +#define QSERDES_V5_TX_BIST_PATTERN4 0x070 +#define QSERDES_V5_TX_BIST_PATTERN5 0x074 +#define QSERDES_V5_TX_BIST_PATTERN6 0x078 +#define QSERDES_V5_TX_BIST_PATTERN7 0x07c +#define QSERDES_V5_TX_BIST_PATTERN8 0x080 +#define QSERDES_V5_TX_LANE_MODE_1 0x084 +#define QSERDES_V5_TX_LANE_MODE_2 0x088 +#define QSERDES_V5_TX_LANE_MODE_3 0x08c +#define QSERDES_V5_TX_LANE_MODE_4 0x090 +#define QSERDES_V5_TX_LANE_MODE_5 0x094 +#define QSERDES_V5_TX_ATB_SEL1 0x098 +#define QSERDES_V5_TX_ATB_SEL2 0x09c +#define QSERDES_V5_TX_RCV_DETECT_LVL 0x0a0 +#define QSERDES_V5_TX_RCV_DETECT_LVL_2 0x0a4 +#define QSERDES_V5_TX_PRBS_SEED1 0x0a8 +#define QSERDES_V5_TX_PRBS_SEED2 0x0ac +#define QSERDES_V5_TX_PRBS_SEED3 0x0b0 +#define QSERDES_V5_TX_PRBS_SEED4 0x0b4 +#define QSERDES_V5_TX_RESET_GEN 0x0b8 +#define QSERDES_V5_TX_RESET_GEN_MUXES 0x0bc +#define QSERDES_V5_TX_TRAN_DRVR_EMP_EN 0x0c0 +#define QSERDES_V5_TX_TX_INTERFACE_MODE 0x0c4 +#define QSERDES_V5_TX_VMODE_CTRL1 0x0c8 +#define QSERDES_V5_TX_ALOG_OBSV_BUS_CTRL_1 0x0cc +#define QSERDES_V5_TX_BIST_STATUS 0x0d0 +#define QSERDES_V5_TX_BIST_ERROR_COUNT1 0x0d4 +#define QSERDES_V5_TX_BIST_ERROR_COUNT2 0x0d8 +#define QSERDES_V5_TX_ALOG_OBSV_BUS_STATUS_1 0x0dc +#define QSERDES_V5_TX_LANE_DIG_CONFIG 0x0e0 +#define QSERDES_V5_TX_PI_QEC_CTRL 0x0e4 +#define QSERDES_V5_TX_PRE_EMPH 0x0e8 +#define QSERDES_V5_TX_SW_RESET 0x0ec +#define QSERDES_V5_TX_DCC_OFFSET 0x0f0 +#define QSERDES_V5_TX_DCC_CMUX_POSTCAL_OFFSET 0x0f4 +#define QSERDES_V5_TX_DCC_CMUX_CAL_CTRL1 0x0f8 +#define QSERDES_V5_TX_DCC_CMUX_CAL_CTRL2 0x0fc +#define QSERDES_V5_TX_DIG_BKUP_CTRL 0x100 +#define QSERDES_V5_TX_DEBUG_BUS0 0x104 +#define QSERDES_V5_TX_DEBUG_BUS1 0x108 +#define QSERDES_V5_TX_DEBUG_BUS2 0x10c +#define QSERDES_V5_TX_DEBUG_BUS3 0x110 +#define QSERDES_V5_TX_READ_EQCODE 0x114 +#define QSERDES_V5_TX_READ_OFFSETCODE 0x118 +#define QSERDES_V5_TX_IA_ERROR_COUNTER_LOW 0x11c +#define QSERDES_V5_TX_IA_ERROR_COUNTER_HIGH 0x120 +#define QSERDES_V5_TX_VGA_READ_CODE 0x124 +#define QSERDES_V5_TX_VTH_READ_CODE 0x128 +#define QSERDES_V5_TX_DFE_TAP1_READ_CODE 0x12c +#define QSERDES_V5_TX_DFE_TAP2_READ_CODE 0x130 +#define QSERDES_V5_TX_IDAC_STATUS_I 0x134 +#define QSERDES_V5_TX_IDAC_STATUS_IBAR 0x138 +#define QSERDES_V5_TX_IDAC_STATUS_Q 0x13c +#define QSERDES_V5_TX_IDAC_STATUS_QBAR 0x140 +#define QSERDES_V5_TX_IDAC_STATUS_A 0x144 +#define QSERDES_V5_TX_IDAC_STATUS_ABAR 0x148 +#define QSERDES_V5_TX_IDAC_STATUS_SM_ON 0x14c +#define QSERDES_V5_TX_IDAC_STATUS_CAL_DONE 0x150 +#define QSERDES_V5_TX_IDAC_STATUS_SIGNERROR 0x154 +#define QSERDES_V5_TX_DCC_CAL_STATUS 0x158 +#define QSERDES_V5_TX_DCC_READ_CODE_STATUS 0x15c + +/* Only for QMP V5 PHY - RX registers */ +#define QSERDES_V5_RX_UCDR_FO_GAIN_HALF 0x000 +#define QSERDES_V5_RX_UCDR_FO_GAIN_QUARTER 0x004 +#define QSERDES_V5_RX_UCDR_FO_GAIN 0x008 +#define QSERDES_V5_RX_UCDR_SO_GAIN_HALF 0x00c +#define QSERDES_V5_RX_UCDR_SO_GAIN_QUARTER 0x010 +#define QSERDES_V5_RX_UCDR_SO_GAIN 0x014 +#define QSERDES_V5_RX_UCDR_SVS_FO_GAIN_HALF 0x018 +#define QSERDES_V5_RX_UCDR_SVS_FO_GAIN_QUARTER 0x01c +#define QSERDES_V5_RX_UCDR_SVS_FO_GAIN 0x020 +#define QSERDES_V5_RX_UCDR_SVS_SO_GAIN_HALF 0x024 +#define QSERDES_V5_RX_UCDR_SVS_SO_GAIN_QUARTER 0x028 +#define QSERDES_V5_RX_UCDR_SVS_SO_GAIN 0x02c +#define QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN 0x030 +#define QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 +#define QSERDES_V5_RX_UCDR_FO_TO_SO_DELAY 0x038 +#define QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c +#define QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040 +#define QSERDES_V5_RX_UCDR_PI_CONTROLS 0x044 +#define QSERDES_V5_RX_UCDR_PI_CTRL2 0x048 +#define QSERDES_V5_RX_UCDR_SB2_THRESH1 0x04c +#define QSERDES_V5_RX_UCDR_SB2_THRESH2 0x050 +#define QSERDES_V5_RX_UCDR_SB2_GAIN1 0x054 +#define QSERDES_V5_RX_UCDR_SB2_GAIN2 0x058 +#define QSERDES_V5_RX_AUX_CONTROL 0x05c +#define QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE 0x060 +#define QSERDES_V5_RX_RCLK_AUXDATA_SEL 0x064 +#define QSERDES_V5_RX_AC_JTAG_ENABLE 0x068 +#define QSERDES_V5_RX_AC_JTAG_INITP 0x06c +#define QSERDES_V5_RX_AC_JTAG_INITN 0x070 +#define QSERDES_V5_RX_AC_JTAG_LVL 0x074 +#define QSERDES_V5_RX_AC_JTAG_MODE 0x078 +#define QSERDES_V5_RX_AC_JTAG_RESET 0x07c +#define QSERDES_V5_RX_RX_TERM_BW 0x080 +#define QSERDES_V5_RX_RX_RCVR_IQ_EN 0x084 +#define QSERDES_V5_RX_RX_IDAC_I_DC_OFFSETS 0x088 +#define QSERDES_V5_RX_RX_IDAC_IBAR_DC_OFFSETS 0x08c +#define QSERDES_V5_RX_RX_IDAC_Q_DC_OFFSETS 0x090 +#define QSERDES_V5_RX_RX_IDAC_QBAR_DC_OFFSETS 0x094 +#define QSERDES_V5_RX_RX_IDAC_A_DC_OFFSETS 0x098 +#define QSERDES_V5_RX_RX_IDAC_ABAR_DC_OFFSETS 0x09c +#define QSERDES_V5_RX_RX_IDAC_EN 0x0a0 +#define QSERDES_V5_RX_RX_IDAC_ENABLES 0x0a4 +#define QSERDES_V5_RX_RX_IDAC_SIGN 0x0a8 +#define QSERDES_V5_RX_RX_HIGHZ_HIGHRATE 0x0ac +#define QSERDES_V5_RX_RX_TERM_AC_BYPASS_DC_COUPLE_OFFSET 0x0b0 +#define QSERDES_V5_RX_DFE_1 0x0b4 +#define QSERDES_V5_RX_DFE_2 0x0b8 +#define QSERDES_V5_RX_DFE_3 0x0bc +#define QSERDES_V5_RX_DFE_4 0x0c0 +#define QSERDES_V5_RX_TX_ADAPT_PRE_THRESH1 0x0c4 +#define QSERDES_V5_RX_TX_ADAPT_PRE_THRESH2 0x0c8 +#define QSERDES_V5_RX_TX_ADAPT_POST_THRESH 0x0cc +#define QSERDES_V5_RX_TX_ADAPT_MAIN_THRESH 0x0d0 +#define QSERDES_V5_RX_VGA_CAL_CNTRL1 0x0d4 +#define QSERDES_V5_RX_VGA_CAL_CNTRL2 0x0d8 +#define QSERDES_V5_RX_GM_CAL 0x0dc +#define QSERDES_V5_RX_RX_VGA_GAIN2_LSB 0x0e0 +#define QSERDES_V5_RX_RX_VGA_GAIN2_MSB 0x0e4 +#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL1 0x0e8 +#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2 0x0ec +#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3 0x0f0 +#define QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4 0x0f4 +#define QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW 0x0f8 +#define QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH 0x0fc +#define QSERDES_V5_RX_RX_IDAC_MEASURE_TIME 0x100 +#define QSERDES_V5_RX_RX_IDAC_ACCUMULATOR 0x104 +#define QSERDES_V5_RX_RX_EQ_OFFSET_LSB 0x108 +#define QSERDES_V5_RX_RX_EQ_OFFSET_MSB 0x10c +#define QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110 +#define QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x114 +#define QSERDES_V5_RX_SIGDET_ENABLES 0x118 +#define QSERDES_V5_RX_SIGDET_CNTRL 0x11c +#define QSERDES_V5_RX_SIGDET_LVL 0x120 +#define QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL 0x124 +#define QSERDES_V5_RX_RX_BAND 0x128 +#define QSERDES_V5_RX_CDR_FREEZE_UP_DN 0x12c +#define QSERDES_V5_RX_CDR_RESET_OVERRIDE 0x130 +#define QSERDES_V5_RX_RX_INTERFACE_MODE 0x134 +#define QSERDES_V5_RX_JITTER_GEN_MODE 0x138 +#define QSERDES_V5_RX_SJ_AMP1 0x13c +#define QSERDES_V5_RX_SJ_AMP2 0x140 +#define QSERDES_V5_RX_SJ_PER1 0x144 +#define QSERDES_V5_RX_SJ_PER2 0x148 +#define QSERDES_V5_RX_PPM_OFFSET1 0x14c +#define QSERDES_V5_RX_PPM_OFFSET2 0x150 +#define QSERDES_V5_RX_SIGN_PPM_PERIOD1 0x154 +#define QSERDES_V5_RX_SIGN_PPM_PERIOD2 0x158 +#define QSERDES_V5_RX_RX_MODE_00_LOW 0x15c +#define QSERDES_V5_RX_RX_MODE_00_HIGH 0x160 +#define QSERDES_V5_RX_RX_MODE_00_HIGH2 0x164 +#define QSERDES_V5_RX_RX_MODE_00_HIGH3 0x168 +#define QSERDES_V5_RX_RX_MODE_00_HIGH4 0x16c +#define QSERDES_V5_RX_RX_MODE_01_LOW 0x170 +#define QSERDES_V5_RX_RX_MODE_01_HIGH 0x174 +#define QSERDES_V5_RX_RX_MODE_01_HIGH2 0x178 +#define QSERDES_V5_RX_RX_MODE_01_HIGH3 0x17c +#define QSERDES_V5_RX_RX_MODE_01_HIGH4 0x180 +#define QSERDES_V5_RX_RX_MODE_10_LOW 0x184 +#define QSERDES_V5_RX_RX_MODE_10_HIGH 0x188 +#define QSERDES_V5_RX_RX_MODE_10_HIGH2 0x18c +#define QSERDES_V5_RX_RX_MODE_10_HIGH3 0x190 +#define QSERDES_V5_RX_RX_MODE_10_HIGH4 0x194 +#define QSERDES_V5_RX_PHPRE_CTRL 0x198 +#define QSERDES_V5_RX_PHPRE_INITVAL 0x19c +#define QSERDES_V5_RX_DFE_EN_TIMER 0x1a0 +#define QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4 +#define QSERDES_V5_RX_DCC_CTRL1 0x1a8 +#define QSERDES_V5_RX_DCC_CTRL2 0x1ac +#define QSERDES_V5_RX_VTH_CODE 0x1b0 +#define QSERDES_V5_RX_VTH_MIN_THRESH 0x1b4 +#define QSERDES_V5_RX_VTH_MAX_THRESH 0x1b8 +#define QSERDES_V5_RX_ALOG_OBSV_BUS_CTRL_1 0x1bc +#define QSERDES_V5_RX_PI_CTRL1 0x1c0 +#define QSERDES_V5_RX_PI_CTRL2 0x1c4 +#define QSERDES_V5_RX_PI_QUAD 0x1c8 +#define QSERDES_V5_RX_IDATA1 0x1cc +#define QSERDES_V5_RX_IDATA2 0x1d0 +#define QSERDES_V5_RX_AUX_DATA1 0x1d4 +#define QSERDES_V5_RX_AUX_DATA2 0x1d8 +#define QSERDES_V5_RX_AC_JTAG_OUTP 0x1dc +#define QSERDES_V5_RX_AC_JTAG_OUTN 0x1e0 +#define QSERDES_V5_RX_RX_SIGDET 0x1e4 +#define QSERDES_V5_RX_ALOG_OBSV_BUS_STATUS_1 0x1e8 + +/* Only for QMP V5 UFS ? */ +#define QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0x178 +#define QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0x17c +#define QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0x180 +#define QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0x184 + +#endif -- cgit v1.2.3