From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/phy/ralink/Kconfig | 21 +++ drivers/phy/ralink/Makefile | 3 + drivers/phy/ralink/phy-mt7621-pci.c | 360 ++++++++++++++++++++++++++++++++++++ drivers/phy/ralink/phy-ralink-usb.c | 238 ++++++++++++++++++++++++ 4 files changed, 622 insertions(+) create mode 100644 drivers/phy/ralink/Kconfig create mode 100644 drivers/phy/ralink/Makefile create mode 100644 drivers/phy/ralink/phy-mt7621-pci.c create mode 100644 drivers/phy/ralink/phy-ralink-usb.c (limited to 'drivers/phy/ralink') diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig new file mode 100644 index 000000000..c2373b30b --- /dev/null +++ b/drivers/phy/ralink/Kconfig @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# PHY drivers for Ralink platforms. +# +config PHY_MT7621_PCI + tristate "MediaTek MT7621 PCI PHY Driver" + depends on (RALINK && OF) || COMPILE_TEST + select GENERIC_PHY + select REGMAP_MMIO + help + Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver, + +config PHY_RALINK_USB + tristate "Ralink USB PHY driver" + depends on RALINK || COMPILE_TEST + depends on HAS_IOMEM + select GENERIC_PHY + select MFD_SYSCON + help + This option enables support for the Ralink USB PHY found inside + RT3352, MT7620, MT7628 and MT7688. diff --git a/drivers/phy/ralink/Makefile b/drivers/phy/ralink/Makefile new file mode 100644 index 000000000..cda2a4a7c --- /dev/null +++ b/drivers/phy/ralink/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_PHY_MT7621_PCI) += phy-mt7621-pci.o +obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c new file mode 100644 index 000000000..85888ab2d --- /dev/null +++ b/drivers/phy/ralink/phy-mt7621-pci.c @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Mediatek MT7621 PCI PHY Driver + * Author: Sergio Paracuellos + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RG_PE1_PIPE_REG 0x02c +#define RG_PE1_PIPE_RST BIT(12) +#define RG_PE1_PIPE_CMD_FRC BIT(4) + +#define RG_P0_TO_P1_WIDTH 0x100 +#define RG_PE1_H_LCDDS_REG 0x49c +#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0) + +#define RG_PE1_FRC_H_XTAL_REG 0x400 +#define RG_PE1_FRC_H_XTAL_TYPE BIT(8) +#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9) + +#define RG_PE1_FRC_PHY_REG 0x000 +#define RG_PE1_FRC_PHY_EN BIT(4) +#define RG_PE1_PHY_EN BIT(5) + +#define RG_PE1_H_PLL_REG 0x490 +#define RG_PE1_H_PLL_BC GENMASK(23, 22) +#define RG_PE1_H_PLL_BP GENMASK(21, 18) +#define RG_PE1_H_PLL_IR GENMASK(15, 12) +#define RG_PE1_H_PLL_IC GENMASK(11, 8) +#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6) +#define RG_PE1_PLL_DIVEN GENMASK(3, 1) + +#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc +#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4) + +#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4 +#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0) + +#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8 +#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0) +#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16) + +#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0 +#define RG_PE1_LCDDS_CLK_PH_INV BIT(5) + +#define RG_PE1_H_PLL_BR_REG 0x4ac +#define RG_PE1_H_PLL_BR GENMASK(18, 16) + +#define RG_PE1_MSTCKDIV_REG 0x414 +#define RG_PE1_MSTCKDIV GENMASK(7, 6) + +#define RG_PE1_FRC_MSTCKDIV BIT(5) + +#define MAX_PHYS 2 + +/** + * struct mt7621_pci_phy - Mt7621 Pcie PHY core + * @dev: pointer to device + * @regmap: kernel regmap pointer + * @phy: pointer to the kernel PHY device + * @sys_clk: pointer to the system XTAL clock + * @port_base: base register + * @has_dual_port: if the phy has dual ports. + * @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst' + * needs to be executed. Depends on chip revision. + */ +struct mt7621_pci_phy { + struct device *dev; + struct regmap *regmap; + struct phy *phy; + struct clk *sys_clk; + void __iomem *port_base; + bool has_dual_port; + bool bypass_pipe_rst; +}; + +static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy, + u32 reg, u32 clr, u32 set) +{ + u32 val; + + /* + * We cannot use 'regmap_write_bits' here because internally + * 'set' is masked before is set to the value that will be + * written to the register. That way results in no reliable + * pci setup. Avoid to mask 'set' before set value to 'val' + * completely avoid the problem. + */ + regmap_read(phy->regmap, reg, &val); + val &= ~clr; + val |= set; + regmap_write(phy->regmap, reg, val); +} + +static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy) +{ + mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST); + mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC); + + if (phy->has_dual_port) { + mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH, + 0, RG_PE1_PIPE_RST); + mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH, + 0, RG_PE1_PIPE_CMD_FRC); + } +} + +static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) +{ + struct device *dev = phy->dev; + unsigned long clk_rate; + + clk_rate = clk_get_rate(phy->sys_clk); + if (!clk_rate) + return -EINVAL; + + /* Set PCIe Port PHY to disable SSC */ + /* Debug Xtal Type */ + mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG, + RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE, + RG_PE1_FRC_H_XTAL_TYPE | + FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00)); + + /* disable port */ + mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN, + RG_PE1_FRC_PHY_EN); + + if (phy->has_dual_port) { + mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, + RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); + } + + if (clk_rate == 40000000) { /* 40MHz Xtal */ + /* Set Pre-divider ratio (for host mode) */ + mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, + FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01)); + + dev_dbg(dev, "Xtal is 40MHz\n"); + } else if (clk_rate == 25000000) { /* 25MHz Xal */ + mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, + FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00)); + + /* Select feedback clock */ + mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG, + RG_PE1_H_PLL_FBKSEL, + FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01)); + + /* DDS NCPO PCW (for host mode) */ + mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG, + RG_PE1_H_LCDDS_SSC_PRD, + FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00)); + + /* DDS SSC dither period control */ + mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG, + RG_PE1_H_LCDDS_SSC_PRD, + FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d)); + + /* DDS SSC dither amplitude control */ + mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG, + RG_PE1_H_LCDDS_SSC_DELTA | + RG_PE1_H_LCDDS_SSC_DELTA1, + FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) | + FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a)); + + dev_dbg(dev, "Xtal is 25MHz\n"); + } else { /* 20MHz Xtal */ + mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV, + FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00)); + + dev_dbg(dev, "Xtal is 20MHz\n"); + } + + /* DDS clock inversion */ + mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG, + RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV); + + /* Set PLL bits */ + mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, + RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR | + RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN, + FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) | + FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) | + FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) | + FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) | + FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02)); + + mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR, + FIELD_PREP(RG_PE1_H_PLL_BR, 0x00)); + + if (clk_rate == 40000000) { /* 40MHz Xtal */ + /* set force mode enable of da_pe1_mstckdiv */ + mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG, + RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV, + FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) | + RG_PE1_FRC_MSTCKDIV); + } + + return 0; +} + +static int mt7621_pci_phy_init(struct phy *phy) +{ + struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); + + if (mphy->bypass_pipe_rst) + mt7621_bypass_pipe_rst(mphy); + + return mt7621_set_phy_for_ssc(mphy); +} + +static int mt7621_pci_phy_power_on(struct phy *phy) +{ + struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); + + /* Enable PHY and disable force mode */ + mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG, + RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN); + + if (mphy->has_dual_port) { + mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, + RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN); + } + + return 0; +} + +static int mt7621_pci_phy_power_off(struct phy *phy) +{ + struct mt7621_pci_phy *mphy = phy_get_drvdata(phy); + + /* Disable PHY */ + mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG, + RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); + + if (mphy->has_dual_port) { + mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH, + RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); + } + + return 0; +} + +static int mt7621_pci_phy_exit(struct phy *phy) +{ + return 0; +} + +static const struct phy_ops mt7621_pci_phy_ops = { + .init = mt7621_pci_phy_init, + .exit = mt7621_pci_phy_exit, + .power_on = mt7621_pci_phy_power_on, + .power_off = mt7621_pci_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= MAX_PHYS)) + return ERR_PTR(-ENODEV); + + mt7621_phy->has_dual_port = args->args[0]; + + dev_dbg(dev, "PHY for 0x%px (dual port = %d)\n", + mt7621_phy->port_base, mt7621_phy->has_dual_port); + + return mt7621_phy->phy; +} + +static const struct soc_device_attribute mt7621_pci_quirks_match[] = { + { .soc_id = "mt7621", .revision = "E2" }, + { /* sentinel */ } +}; + +static const struct regmap_config mt7621_pci_phy_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = 0x700, +}; + +static int mt7621_pci_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct soc_device_attribute *attr; + struct phy_provider *provider; + struct mt7621_pci_phy *phy; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + attr = soc_device_match(mt7621_pci_quirks_match); + if (attr) + phy->bypass_pipe_rst = true; + + phy->dev = dev; + platform_set_drvdata(pdev, phy); + + phy->port_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->port_base)) { + dev_err(dev, "failed to remap phy regs\n"); + return PTR_ERR(phy->port_base); + } + + phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base, + &mt7621_pci_phy_regmap_config); + if (IS_ERR(phy->regmap)) + return PTR_ERR(phy->regmap); + + phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy->phy); + } + + phy->sys_clk = devm_clk_get(dev, NULL); + if (IS_ERR(phy->sys_clk)) { + dev_err(dev, "failed to get phy clock\n"); + return PTR_ERR(phy->sys_clk); + } + + phy_set_drvdata(phy->phy, phy); + + provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id mt7621_pci_phy_ids[] = { + { .compatible = "mediatek,mt7621-pci-phy" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt7621_pci_phy_ids); + +static struct platform_driver mt7621_pci_phy_driver = { + .probe = mt7621_pci_phy_probe, + .driver = { + .name = "mt7621-pci-phy", + .of_match_table = mt7621_pci_phy_ids, + }, +}; + +builtin_platform_driver(mt7621_pci_phy_driver); + +MODULE_AUTHOR("Sergio Paracuellos "); +MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c new file mode 100644 index 000000000..2bd8ad2e7 --- /dev/null +++ b/drivers/phy/ralink/phy-ralink-usb.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2017 John Crispin + * + * Based on code from + * Allwinner Technology Co., Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RT_SYSC_REG_SYSCFG1 0x014 +#define RT_SYSC_REG_CLKCFG1 0x030 +#define RT_SYSC_REG_USB_PHY_CFG 0x05c + +#define OFS_U2_PHY_AC0 0x800 +#define OFS_U2_PHY_AC1 0x804 +#define OFS_U2_PHY_AC2 0x808 +#define OFS_U2_PHY_ACR0 0x810 +#define OFS_U2_PHY_ACR1 0x814 +#define OFS_U2_PHY_ACR2 0x818 +#define OFS_U2_PHY_ACR3 0x81C +#define OFS_U2_PHY_ACR4 0x820 +#define OFS_U2_PHY_AMON0 0x824 +#define OFS_U2_PHY_DCR0 0x860 +#define OFS_U2_PHY_DCR1 0x864 +#define OFS_U2_PHY_DTM0 0x868 +#define OFS_U2_PHY_DTM1 0x86C + +#define RT_RSTCTRL_UDEV BIT(25) +#define RT_RSTCTRL_UHST BIT(22) +#define RT_SYSCFG1_USB0_HOST_MODE BIT(10) + +#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25) +#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22) +#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define USB_PHY_UTMI_8B60M BIT(1) +#define UDEV_WAKEUP BIT(0) + +struct ralink_usb_phy { + struct reset_control *rstdev; + struct reset_control *rsthost; + u32 clk; + struct phy *phy; + void __iomem *base; + struct regmap *sysctl; +}; + +static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg) +{ + writel(val, phy->base + reg); +} + +static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg) +{ + return readl(phy->base + reg); +} + +static void ralink_usb_phy_init(struct ralink_usb_phy *phy) +{ + u2_phy_r32(phy, OFS_U2_PHY_AC2); + u2_phy_r32(phy, OFS_U2_PHY_ACR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + + u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0); + u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1); + u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3); + u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0); +} + +static int ralink_usb_phy_power_on(struct phy *_phy) +{ + struct ralink_usb_phy *phy = phy_get_drvdata(_phy); + u32 t; + + /* enable the phy */ + regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, + phy->clk, phy->clk); + + /* setup host mode */ + regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1, + RT_SYSCFG1_USB0_HOST_MODE, + RT_SYSCFG1_USB0_HOST_MODE); + + /* deassert the reset lines */ + reset_control_deassert(phy->rsthost); + reset_control_deassert(phy->rstdev); + + /* + * The SDK kernel had a delay of 100ms. however on device + * testing showed that 10ms is enough + */ + mdelay(10); + + if (phy->base) + ralink_usb_phy_init(phy); + + /* print some status info */ + regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t); + dev_info(&phy->phy->dev, "remote usb device wakeup %s\n", + (t & UDEV_WAKEUP) ? ("enabled") : ("disabled")); + if (t & USB_PHY_UTMI_8B60M) + dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n"); + else + dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n"); + + return 0; +} + +static int ralink_usb_phy_power_off(struct phy *_phy) +{ + struct ralink_usb_phy *phy = phy_get_drvdata(_phy); + + /* disable the phy */ + regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, + phy->clk, 0); + + /* assert the reset lines */ + reset_control_assert(phy->rstdev); + reset_control_assert(phy->rsthost); + + return 0; +} + +static const struct phy_ops ralink_usb_phy_ops = { + .power_on = ralink_usb_phy_power_on, + .power_off = ralink_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id ralink_usb_phy_of_match[] = { + { + .compatible = "ralink,rt3352-usbphy", + .data = (void *)(uintptr_t)(RT_CLKCFG1_UPHY1_CLK_EN | + RT_CLKCFG1_UPHY0_CLK_EN) + }, + { + .compatible = "mediatek,mt7620-usbphy", + .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN | + MT7620_CLKCFG1_UPHY0_CLK_EN) + }, + { + .compatible = "mediatek,mt7628-usbphy", + .data = (void *)(uintptr_t)(MT7620_CLKCFG1_UPHY1_CLK_EN | + MT7620_CLKCFG1_UPHY0_CLK_EN) }, + { }, +}; +MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match); + +static int ralink_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + const struct of_device_id *match; + struct ralink_usb_phy *phy; + + match = of_match_device(ralink_usb_phy_of_match, &pdev->dev); + if (!match) + return -ENODEV; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->clk = (uintptr_t)match->data; + phy->base = NULL; + + phy->sysctl = syscon_regmap_lookup_by_phandle(dev->of_node, "ralink,sysctl"); + if (IS_ERR(phy->sysctl)) { + dev_err(dev, "failed to get sysctl registers\n"); + return PTR_ERR(phy->sysctl); + } + + /* The MT7628 and MT7688 require extra setup of PHY registers. */ + if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) { + phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->base)) { + dev_err(dev, "failed to remap register memory\n"); + return PTR_ERR(phy->base); + } + } + + phy->rsthost = devm_reset_control_get(&pdev->dev, "host"); + if (IS_ERR(phy->rsthost)) { + dev_err(dev, "host reset is missing\n"); + return PTR_ERR(phy->rsthost); + } + + phy->rstdev = devm_reset_control_get(&pdev->dev, "device"); + if (IS_ERR(phy->rstdev)) { + dev_err(dev, "device reset is missing\n"); + return PTR_ERR(phy->rstdev); + } + + phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy->phy); + } + phy_set_drvdata(phy->phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver ralink_usb_phy_driver = { + .probe = ralink_usb_phy_probe, + .driver = { + .of_match_table = ralink_usb_phy_of_match, + .name = "ralink-usb-phy", + } +}; +module_platform_driver(ralink_usb_phy_driver); + +MODULE_DESCRIPTION("Ralink USB phy driver"); +MODULE_AUTHOR("John Crispin "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3