From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/phy/st/phy-miphy28lp.c | 1282 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1282 insertions(+) create mode 100644 drivers/phy/st/phy-miphy28lp.c (limited to 'drivers/phy/st/phy-miphy28lp.c') diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c new file mode 100644 index 000000000..068160a34 --- /dev/null +++ b/drivers/phy/st/phy-miphy28lp.c @@ -0,0 +1,1282 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014 STMicroelectronics + * + * STMicroelectronics PHY driver MiPHY28lp (for SoC STiH407). + * + * Author: Alexandre Torgue + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* MiPHY registers */ +#define MIPHY_CONF_RESET 0x00 +#define RST_APPLI_SW BIT(0) +#define RST_CONF_SW BIT(1) +#define RST_MACRO_SW BIT(2) + +#define MIPHY_RESET 0x01 +#define RST_PLL_SW BIT(0) +#define RST_COMP_SW BIT(2) + +#define MIPHY_STATUS_1 0x02 +#define PHY_RDY BIT(0) +#define HFC_RDY BIT(1) +#define HFC_PLL BIT(2) + +#define MIPHY_CONTROL 0x04 +#define TERM_EN_SW BIT(2) +#define DIS_LINK_RST BIT(3) +#define AUTO_RST_RX BIT(4) +#define PX_RX_POL BIT(5) + +#define MIPHY_BOUNDARY_SEL 0x0a +#define TX_SEL BIT(6) +#define SSC_SEL BIT(4) +#define GENSEL_SEL BIT(0) + +#define MIPHY_BOUNDARY_1 0x0b +#define MIPHY_BOUNDARY_2 0x0c +#define SSC_EN_SW BIT(2) + +#define MIPHY_PLL_CLKREF_FREQ 0x0d +#define MIPHY_SPEED 0x0e +#define TX_SPDSEL_80DEC 0 +#define TX_SPDSEL_40DEC 1 +#define TX_SPDSEL_20DEC 2 +#define RX_SPDSEL_80DEC 0 +#define RX_SPDSEL_40DEC (1 << 2) +#define RX_SPDSEL_20DEC (2 << 2) + +#define MIPHY_CONF 0x0f +#define MIPHY_CTRL_TEST_SEL 0x20 +#define MIPHY_CTRL_TEST_1 0x21 +#define MIPHY_CTRL_TEST_2 0x22 +#define MIPHY_CTRL_TEST_3 0x23 +#define MIPHY_CTRL_TEST_4 0x24 +#define MIPHY_FEEDBACK_TEST 0x25 +#define MIPHY_DEBUG_BUS 0x26 +#define MIPHY_DEBUG_STATUS_MSB 0x27 +#define MIPHY_DEBUG_STATUS_LSB 0x28 +#define MIPHY_PWR_RAIL_1 0x29 +#define MIPHY_PWR_RAIL_2 0x2a +#define MIPHY_SYNCHAR_CONTROL 0x30 + +#define MIPHY_COMP_FSM_1 0x3a +#define COMP_START BIT(6) + +#define MIPHY_COMP_FSM_6 0x3f +#define COMP_DONE BIT(7) + +#define MIPHY_COMP_POSTP 0x42 +#define MIPHY_TX_CTRL_1 0x49 +#define TX_REG_STEP_0V 0 +#define TX_REG_STEP_P_25MV 1 +#define TX_REG_STEP_P_50MV 2 +#define TX_REG_STEP_N_25MV 7 +#define TX_REG_STEP_N_50MV 6 +#define TX_REG_STEP_N_75MV 5 + +#define MIPHY_TX_CTRL_2 0x4a +#define TX_SLEW_SW_40_PS 0 +#define TX_SLEW_SW_80_PS 1 +#define TX_SLEW_SW_120_PS 2 + +#define MIPHY_TX_CTRL_3 0x4b +#define MIPHY_TX_CAL_MAN 0x4e +#define TX_SLEW_CAL_MAN_EN BIT(0) + +#define MIPHY_TST_BIAS_BOOST_2 0x62 +#define MIPHY_BIAS_BOOST_1 0x63 +#define MIPHY_BIAS_BOOST_2 0x64 +#define MIPHY_RX_DESBUFF_FDB_2 0x67 +#define MIPHY_RX_DESBUFF_FDB_3 0x68 +#define MIPHY_SIGDET_COMPENS1 0x69 +#define MIPHY_SIGDET_COMPENS2 0x6a +#define MIPHY_JITTER_PERIOD 0x6b +#define MIPHY_JITTER_AMPLITUDE_1 0x6c +#define MIPHY_JITTER_AMPLITUDE_2 0x6d +#define MIPHY_JITTER_AMPLITUDE_3 0x6e +#define MIPHY_RX_K_GAIN 0x78 +#define MIPHY_RX_BUFFER_CTRL 0x7a +#define VGA_GAIN BIT(0) +#define EQ_DC_GAIN BIT(2) +#define EQ_BOOST_GAIN BIT(3) + +#define MIPHY_RX_VGA_GAIN 0x7b +#define MIPHY_RX_EQU_GAIN_1 0x7f +#define MIPHY_RX_EQU_GAIN_2 0x80 +#define MIPHY_RX_EQU_GAIN_3 0x81 +#define MIPHY_RX_CAL_CTRL_1 0x97 +#define MIPHY_RX_CAL_CTRL_2 0x98 + +#define MIPHY_RX_CAL_OFFSET_CTRL 0x99 +#define CAL_OFFSET_VGA_64 (0x03 << 0) +#define CAL_OFFSET_THRESHOLD_64 (0x03 << 2) +#define VGA_OFFSET_POLARITY BIT(4) +#define OFFSET_COMPENSATION_EN BIT(6) + +#define MIPHY_RX_CAL_VGA_STEP 0x9a +#define MIPHY_RX_CAL_EYE_MIN 0x9d +#define MIPHY_RX_CAL_OPT_LENGTH 0x9f +#define MIPHY_RX_LOCK_CTRL_1 0xc1 +#define MIPHY_RX_LOCK_SETTINGS_OPT 0xc2 +#define MIPHY_RX_LOCK_STEP 0xc4 + +#define MIPHY_RX_SIGDET_SLEEP_OA 0xc9 +#define MIPHY_RX_SIGDET_SLEEP_SEL 0xca +#define MIPHY_RX_SIGDET_WAIT_SEL 0xcb +#define MIPHY_RX_SIGDET_DATA_SEL 0xcc +#define EN_ULTRA_LOW_POWER BIT(0) +#define EN_FIRST_HALF BIT(1) +#define EN_SECOND_HALF BIT(2) +#define EN_DIGIT_SIGNAL_CHECK BIT(3) + +#define MIPHY_RX_POWER_CTRL_1 0xcd +#define MIPHY_RX_POWER_CTRL_2 0xce +#define MIPHY_PLL_CALSET_CTRL 0xd3 +#define MIPHY_PLL_CALSET_1 0xd4 +#define MIPHY_PLL_CALSET_2 0xd5 +#define MIPHY_PLL_CALSET_3 0xd6 +#define MIPHY_PLL_CALSET_4 0xd7 +#define MIPHY_PLL_SBR_1 0xe3 +#define SET_NEW_CHANGE BIT(1) + +#define MIPHY_PLL_SBR_2 0xe4 +#define MIPHY_PLL_SBR_3 0xe5 +#define MIPHY_PLL_SBR_4 0xe6 +#define MIPHY_PLL_COMMON_MISC_2 0xe9 +#define START_ACT_FILT BIT(6) + +#define MIPHY_PLL_SPAREIN 0xeb + +/* + * On STiH407 the glue logic can be different among MiPHY devices; for example: + * MiPHY0: OSC_FORCE_EXT means: + * 0: 30MHz crystal clk - 1: 100MHz ext clk routed through MiPHY1 + * MiPHY1: OSC_FORCE_EXT means: + * 1: 30MHz crystal clk - 0: 100MHz ext clk routed through MiPHY1 + * Some devices have not the possibility to check if the osc is ready. + */ +#define MIPHY_OSC_FORCE_EXT BIT(3) +#define MIPHY_OSC_RDY BIT(5) + +#define MIPHY_CTRL_MASK 0x0f +#define MIPHY_CTRL_DEFAULT 0 +#define MIPHY_CTRL_SYNC_D_EN BIT(2) + +/* SATA / PCIe defines */ +#define SATA_CTRL_MASK 0x07 +#define PCIE_CTRL_MASK 0xff +#define SATA_CTRL_SELECT_SATA 1 +#define SATA_CTRL_SELECT_PCIE 0 +#define SYSCFG_PCIE_PCIE_VAL 0x80 +#define SATA_SPDMODE 1 + +#define MIPHY_SATA_BANK_NB 3 +#define MIPHY_PCIE_BANK_NB 2 + +enum { + SYSCFG_CTRL, + SYSCFG_STATUS, + SYSCFG_PCI, + SYSCFG_SATA, + SYSCFG_REG_MAX, +}; + +struct miphy28lp_phy { + struct phy *phy; + struct miphy28lp_dev *phydev; + void __iomem *base; + void __iomem *pipebase; + + bool osc_force_ext; + bool osc_rdy; + bool px_rx_pol_inv; + bool ssc; + bool tx_impedance; + + struct reset_control *miphy_rst; + + u32 sata_gen; + + /* Sysconfig registers offsets needed to configure the device */ + u32 syscfg_reg[SYSCFG_REG_MAX]; + u8 type; +}; + +struct miphy28lp_dev { + struct device *dev; + struct regmap *regmap; + struct mutex miphy_mutex; + struct miphy28lp_phy **phys; + int nphys; +}; + +struct miphy_initval { + u16 reg; + u16 val; +}; + +enum miphy_sata_gen { SATA_GEN1, SATA_GEN2, SATA_GEN3 }; + +static char *PHY_TYPE_name[] = { "sata-up", "pcie-up", "", "usb3-up" }; + +struct pll_ratio { + int clk_ref; + int calset_1; + int calset_2; + int calset_3; + int calset_4; + int cal_ctrl; +}; + +static struct pll_ratio sata_pll_ratio = { + .clk_ref = 0x1e, + .calset_1 = 0xc8, + .calset_2 = 0x00, + .calset_3 = 0x00, + .calset_4 = 0x00, + .cal_ctrl = 0x00, +}; + +static struct pll_ratio pcie_pll_ratio = { + .clk_ref = 0x1e, + .calset_1 = 0xa6, + .calset_2 = 0xaa, + .calset_3 = 0xaa, + .calset_4 = 0x00, + .cal_ctrl = 0x00, +}; + +static struct pll_ratio usb3_pll_ratio = { + .clk_ref = 0x1e, + .calset_1 = 0xa6, + .calset_2 = 0xaa, + .calset_3 = 0xaa, + .calset_4 = 0x04, + .cal_ctrl = 0x00, +}; + +struct miphy28lp_pll_gen { + int bank; + int speed; + int bias_boost_1; + int bias_boost_2; + int tx_ctrl_1; + int tx_ctrl_2; + int tx_ctrl_3; + int rx_k_gain; + int rx_vga_gain; + int rx_equ_gain_1; + int rx_equ_gain_2; + int rx_equ_gain_3; + int rx_buff_ctrl; +}; + +static struct miphy28lp_pll_gen sata_pll_gen[] = { + { + .bank = 0x00, + .speed = TX_SPDSEL_80DEC | RX_SPDSEL_80DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xae, + .tx_ctrl_2 = 0x53, + .tx_ctrl_3 = 0x00, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x7d, + .rx_equ_gain_2 = 0x56, + .rx_equ_gain_3 = 0x00, + }, + { + .bank = 0x01, + .speed = TX_SPDSEL_40DEC | RX_SPDSEL_40DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xae, + .tx_ctrl_2 = 0x72, + .tx_ctrl_3 = 0x20, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x7d, + .rx_equ_gain_2 = 0x56, + .rx_equ_gain_3 = 0x00, + }, + { + .bank = 0x02, + .speed = TX_SPDSEL_20DEC | RX_SPDSEL_20DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xae, + .tx_ctrl_2 = 0xc0, + .tx_ctrl_3 = 0x20, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x7d, + .rx_equ_gain_2 = 0x56, + .rx_equ_gain_3 = 0x00, + }, +}; + +static struct miphy28lp_pll_gen pcie_pll_gen[] = { + { + .bank = 0x00, + .speed = TX_SPDSEL_40DEC | RX_SPDSEL_40DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xa5, + .tx_ctrl_1 = TX_REG_STEP_N_25MV, + .tx_ctrl_2 = 0x71, + .tx_ctrl_3 = 0x60, + .rx_k_gain = 0x98, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x79, + .rx_equ_gain_2 = 0x56, + }, + { + .bank = 0x01, + .speed = TX_SPDSEL_20DEC | RX_SPDSEL_20DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xa5, + .tx_ctrl_1 = TX_REG_STEP_N_25MV, + .tx_ctrl_2 = 0x70, + .tx_ctrl_3 = 0x60, + .rx_k_gain = 0xcc, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x78, + .rx_equ_gain_2 = 0x07, + }, +}; + +static inline void miphy28lp_set_reset(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Putting Macro in reset */ + writeb_relaxed(RST_APPLI_SW, base + MIPHY_CONF_RESET); + + val = RST_APPLI_SW | RST_CONF_SW; + writeb_relaxed(val, base + MIPHY_CONF_RESET); + + writeb_relaxed(RST_APPLI_SW, base + MIPHY_CONF_RESET); + + /* Bringing the MIPHY-CPU registers out of reset */ + if (miphy_phy->type == PHY_TYPE_PCIE) { + val = AUTO_RST_RX | TERM_EN_SW; + writeb_relaxed(val, base + MIPHY_CONTROL); + } else { + val = AUTO_RST_RX | TERM_EN_SW | DIS_LINK_RST; + writeb_relaxed(val, base + MIPHY_CONTROL); + } +} + +static inline void miphy28lp_pll_calibration(struct miphy28lp_phy *miphy_phy, + struct pll_ratio *pll_ratio) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Applying PLL Settings */ + writeb_relaxed(0x1d, base + MIPHY_PLL_SPAREIN); + writeb_relaxed(pll_ratio->clk_ref, base + MIPHY_PLL_CLKREF_FREQ); + + /* PLL Ratio */ + writeb_relaxed(pll_ratio->calset_1, base + MIPHY_PLL_CALSET_1); + writeb_relaxed(pll_ratio->calset_2, base + MIPHY_PLL_CALSET_2); + writeb_relaxed(pll_ratio->calset_3, base + MIPHY_PLL_CALSET_3); + writeb_relaxed(pll_ratio->calset_4, base + MIPHY_PLL_CALSET_4); + writeb_relaxed(pll_ratio->cal_ctrl, base + MIPHY_PLL_CALSET_CTRL); + + writeb_relaxed(TX_SEL, base + MIPHY_BOUNDARY_SEL); + + val = (0x68 << 1) | TX_SLEW_CAL_MAN_EN; + writeb_relaxed(val, base + MIPHY_TX_CAL_MAN); + + val = VGA_OFFSET_POLARITY | CAL_OFFSET_THRESHOLD_64 | CAL_OFFSET_VGA_64; + + if (miphy_phy->type != PHY_TYPE_SATA) + val |= OFFSET_COMPENSATION_EN; + + writeb_relaxed(val, base + MIPHY_RX_CAL_OFFSET_CTRL); + + if (miphy_phy->type == PHY_TYPE_USB3) { + writeb_relaxed(0x00, base + MIPHY_CONF); + writeb_relaxed(0x70, base + MIPHY_RX_LOCK_STEP); + writeb_relaxed(EN_FIRST_HALF, base + MIPHY_RX_SIGDET_SLEEP_OA); + writeb_relaxed(EN_FIRST_HALF, base + MIPHY_RX_SIGDET_SLEEP_SEL); + writeb_relaxed(EN_FIRST_HALF, base + MIPHY_RX_SIGDET_WAIT_SEL); + + val = EN_DIGIT_SIGNAL_CHECK | EN_FIRST_HALF; + writeb_relaxed(val, base + MIPHY_RX_SIGDET_DATA_SEL); + } + +} + +static inline void miphy28lp_sata_config_gen(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int i; + + for (i = 0; i < ARRAY_SIZE(sata_pll_gen); i++) { + struct miphy28lp_pll_gen *gen = &sata_pll_gen[i]; + + /* Banked settings */ + writeb_relaxed(gen->bank, base + MIPHY_CONF); + writeb_relaxed(gen->speed, base + MIPHY_SPEED); + writeb_relaxed(gen->bias_boost_1, base + MIPHY_BIAS_BOOST_1); + writeb_relaxed(gen->bias_boost_2, base + MIPHY_BIAS_BOOST_2); + + /* TX buffer Settings */ + writeb_relaxed(gen->tx_ctrl_2, base + MIPHY_TX_CTRL_2); + writeb_relaxed(gen->tx_ctrl_3, base + MIPHY_TX_CTRL_3); + + /* RX Buffer Settings */ + writeb_relaxed(gen->rx_buff_ctrl, base + MIPHY_RX_BUFFER_CTRL); + writeb_relaxed(gen->rx_vga_gain, base + MIPHY_RX_VGA_GAIN); + writeb_relaxed(gen->rx_equ_gain_1, base + MIPHY_RX_EQU_GAIN_1); + writeb_relaxed(gen->rx_equ_gain_2, base + MIPHY_RX_EQU_GAIN_2); + writeb_relaxed(gen->rx_equ_gain_3, base + MIPHY_RX_EQU_GAIN_3); + } +} + +static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int i; + + for (i = 0; i < ARRAY_SIZE(pcie_pll_gen); i++) { + struct miphy28lp_pll_gen *gen = &pcie_pll_gen[i]; + + /* Banked settings */ + writeb_relaxed(gen->bank, base + MIPHY_CONF); + writeb_relaxed(gen->speed, base + MIPHY_SPEED); + writeb_relaxed(gen->bias_boost_1, base + MIPHY_BIAS_BOOST_1); + writeb_relaxed(gen->bias_boost_2, base + MIPHY_BIAS_BOOST_2); + + /* TX buffer Settings */ + writeb_relaxed(gen->tx_ctrl_1, base + MIPHY_TX_CTRL_1); + writeb_relaxed(gen->tx_ctrl_2, base + MIPHY_TX_CTRL_2); + writeb_relaxed(gen->tx_ctrl_3, base + MIPHY_TX_CTRL_3); + + writeb_relaxed(gen->rx_k_gain, base + MIPHY_RX_K_GAIN); + + /* RX Buffer Settings */ + writeb_relaxed(gen->rx_buff_ctrl, base + MIPHY_RX_BUFFER_CTRL); + writeb_relaxed(gen->rx_vga_gain, base + MIPHY_RX_VGA_GAIN); + writeb_relaxed(gen->rx_equ_gain_1, base + MIPHY_RX_EQU_GAIN_1); + writeb_relaxed(gen->rx_equ_gain_2, base + MIPHY_RX_EQU_GAIN_2); + } +} + +static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy) +{ + unsigned long finish = jiffies + 5 * HZ; + u8 val; + + /* Waiting for Compensation to complete */ + do { + val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6); + + if (time_after_eq(jiffies, finish)) + return -EBUSY; + cpu_relax(); + } while (!(val & COMP_DONE)); + + return 0; +} + + +static inline int miphy28lp_compensation(struct miphy28lp_phy *miphy_phy, + struct pll_ratio *pll_ratio) +{ + void __iomem *base = miphy_phy->base; + + /* Poll for HFC ready after reset release */ + /* Compensation measurement */ + writeb_relaxed(RST_PLL_SW | RST_COMP_SW, base + MIPHY_RESET); + + writeb_relaxed(0x00, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(pll_ratio->clk_ref, base + MIPHY_PLL_CLKREF_FREQ); + writeb_relaxed(COMP_START, base + MIPHY_COMP_FSM_1); + + if (miphy_phy->type == PHY_TYPE_PCIE) + writeb_relaxed(RST_PLL_SW, base + MIPHY_RESET); + + writeb_relaxed(0x00, base + MIPHY_RESET); + writeb_relaxed(START_ACT_FILT, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + + /* TX compensation offset to re-center TX impedance */ + writeb_relaxed(0x00, base + MIPHY_COMP_POSTP); + + if (miphy_phy->type == PHY_TYPE_PCIE) + return miphy28lp_wait_compensation(miphy_phy); + + return 0; +} + +static inline void miphy28_usb3_miphy_reset(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* MIPHY Reset */ + writeb_relaxed(RST_APPLI_SW, base + MIPHY_CONF_RESET); + writeb_relaxed(0x00, base + MIPHY_CONF_RESET); + writeb_relaxed(RST_COMP_SW, base + MIPHY_RESET); + + val = RST_COMP_SW | RST_PLL_SW; + writeb_relaxed(val, base + MIPHY_RESET); + + writeb_relaxed(0x00, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(0x1e, base + MIPHY_PLL_CLKREF_FREQ); + writeb_relaxed(COMP_START, base + MIPHY_COMP_FSM_1); + writeb_relaxed(RST_PLL_SW, base + MIPHY_RESET); + writeb_relaxed(0x00, base + MIPHY_RESET); + writeb_relaxed(START_ACT_FILT, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(0x00, base + MIPHY_CONF); + writeb_relaxed(0x00, base + MIPHY_BOUNDARY_1); + writeb_relaxed(0x00, base + MIPHY_TST_BIAS_BOOST_2); + writeb_relaxed(0x00, base + MIPHY_CONF); + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + writeb_relaxed(0xa5, base + MIPHY_DEBUG_BUS); + writeb_relaxed(0x00, base + MIPHY_CONF); +} + +static void miphy_sata_tune_ssc(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Compensate Tx impedance to avoid out of range values */ + /* + * Enable the SSC on PLL for all banks + * SSC Modulation @ 31 KHz and 4000 ppm modulation amp + */ + val = readb_relaxed(base + MIPHY_BOUNDARY_2); + val |= SSC_EN_SW; + writeb_relaxed(val, base + MIPHY_BOUNDARY_2); + + val = readb_relaxed(base + MIPHY_BOUNDARY_SEL); + val |= SSC_SEL; + writeb_relaxed(val, base + MIPHY_BOUNDARY_SEL); + + for (val = 0; val < MIPHY_SATA_BANK_NB; val++) { + writeb_relaxed(val, base + MIPHY_CONF); + + /* Add value to each reference clock cycle */ + /* and define the period length of the SSC */ + writeb_relaxed(0x3c, base + MIPHY_PLL_SBR_2); + writeb_relaxed(0x6c, base + MIPHY_PLL_SBR_3); + writeb_relaxed(0x81, base + MIPHY_PLL_SBR_4); + + /* Clear any previous request */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* requests the PLL to take in account new parameters */ + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + + /* To be sure there is no other pending requests */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + } +} + +static void miphy_pcie_tune_ssc(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Compensate Tx impedance to avoid out of range values */ + /* + * Enable the SSC on PLL for all banks + * SSC Modulation @ 31 KHz and 4000 ppm modulation amp + */ + val = readb_relaxed(base + MIPHY_BOUNDARY_2); + val |= SSC_EN_SW; + writeb_relaxed(val, base + MIPHY_BOUNDARY_2); + + val = readb_relaxed(base + MIPHY_BOUNDARY_SEL); + val |= SSC_SEL; + writeb_relaxed(val, base + MIPHY_BOUNDARY_SEL); + + for (val = 0; val < MIPHY_PCIE_BANK_NB; val++) { + writeb_relaxed(val, base + MIPHY_CONF); + + /* Validate Step component */ + writeb_relaxed(0x69, base + MIPHY_PLL_SBR_3); + writeb_relaxed(0x21, base + MIPHY_PLL_SBR_4); + + /* Validate Period component */ + writeb_relaxed(0x3c, base + MIPHY_PLL_SBR_2); + writeb_relaxed(0x21, base + MIPHY_PLL_SBR_4); + + /* Clear any previous request */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* requests the PLL to take in account new parameters */ + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + + /* To be sure there is no other pending requests */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + } +} + +static inline void miphy_tune_tx_impedance(struct miphy28lp_phy *miphy_phy) +{ + /* Compensate Tx impedance to avoid out of range values */ + writeb_relaxed(0x02, miphy_phy->base + MIPHY_COMP_POSTP); +} + +static inline int miphy28lp_configure_sata(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int err; + u8 val; + + /* Putting Macro in reset */ + miphy28lp_set_reset(miphy_phy); + + /* PLL calibration */ + miphy28lp_pll_calibration(miphy_phy, &sata_pll_ratio); + + /* Banked settings Gen1/Gen2/Gen3 */ + miphy28lp_sata_config_gen(miphy_phy); + + /* Power control */ + /* Input bridge enable, manual input bridge control */ + writeb_relaxed(0x21, base + MIPHY_RX_POWER_CTRL_1); + + /* Macro out of reset */ + writeb_relaxed(0x00, base + MIPHY_CONF_RESET); + + /* Poll for HFC ready after reset release */ + /* Compensation measurement */ + err = miphy28lp_compensation(miphy_phy, &sata_pll_ratio); + if (err) + return err; + + if (miphy_phy->px_rx_pol_inv) { + /* Invert Rx polarity */ + val = readb_relaxed(miphy_phy->base + MIPHY_CONTROL); + val |= PX_RX_POL; + writeb_relaxed(val, miphy_phy->base + MIPHY_CONTROL); + } + + if (miphy_phy->ssc) + miphy_sata_tune_ssc(miphy_phy); + + if (miphy_phy->tx_impedance) + miphy_tune_tx_impedance(miphy_phy); + + return 0; +} + +static inline int miphy28lp_configure_pcie(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int err; + + /* Putting Macro in reset */ + miphy28lp_set_reset(miphy_phy); + + /* PLL calibration */ + miphy28lp_pll_calibration(miphy_phy, &pcie_pll_ratio); + + /* Banked settings Gen1/Gen2 */ + miphy28lp_pcie_config_gen(miphy_phy); + + /* Power control */ + /* Input bridge enable, manual input bridge control */ + writeb_relaxed(0x21, base + MIPHY_RX_POWER_CTRL_1); + + /* Macro out of reset */ + writeb_relaxed(0x00, base + MIPHY_CONF_RESET); + + /* Poll for HFC ready after reset release */ + /* Compensation measurement */ + err = miphy28lp_compensation(miphy_phy, &pcie_pll_ratio); + if (err) + return err; + + if (miphy_phy->ssc) + miphy_pcie_tune_ssc(miphy_phy); + + if (miphy_phy->tx_impedance) + miphy_tune_tx_impedance(miphy_phy); + + return 0; +} + + +static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Putting Macro in reset */ + miphy28lp_set_reset(miphy_phy); + + /* PLL calibration */ + miphy28lp_pll_calibration(miphy_phy, &usb3_pll_ratio); + + /* Writing The Speed Rate */ + writeb_relaxed(0x00, base + MIPHY_CONF); + + val = RX_SPDSEL_20DEC | TX_SPDSEL_20DEC; + writeb_relaxed(val, base + MIPHY_SPEED); + + /* RX Channel compensation and calibration */ + writeb_relaxed(0x1c, base + MIPHY_RX_LOCK_SETTINGS_OPT); + writeb_relaxed(0x51, base + MIPHY_RX_CAL_CTRL_1); + writeb_relaxed(0x70, base + MIPHY_RX_CAL_CTRL_2); + + val = OFFSET_COMPENSATION_EN | VGA_OFFSET_POLARITY | + CAL_OFFSET_THRESHOLD_64 | CAL_OFFSET_VGA_64; + writeb_relaxed(val, base + MIPHY_RX_CAL_OFFSET_CTRL); + writeb_relaxed(0x22, base + MIPHY_RX_CAL_VGA_STEP); + writeb_relaxed(0x0e, base + MIPHY_RX_CAL_OPT_LENGTH); + + val = EQ_DC_GAIN | VGA_GAIN; + writeb_relaxed(val, base + MIPHY_RX_BUFFER_CTRL); + writeb_relaxed(0x78, base + MIPHY_RX_EQU_GAIN_1); + writeb_relaxed(0x1b, base + MIPHY_SYNCHAR_CONTROL); + + /* TX compensation offset to re-center TX impedance */ + writeb_relaxed(0x02, base + MIPHY_COMP_POSTP); + + /* Enable GENSEL_SEL and SSC */ + /* TX_SEL=0 swing preemp forced by pipe registres */ + val = SSC_SEL | GENSEL_SEL; + writeb_relaxed(val, base + MIPHY_BOUNDARY_SEL); + + /* MIPHY Bias boost */ + writeb_relaxed(0x00, base + MIPHY_BIAS_BOOST_1); + writeb_relaxed(0xa7, base + MIPHY_BIAS_BOOST_2); + + /* SSC modulation */ + writeb_relaxed(SSC_EN_SW, base + MIPHY_BOUNDARY_2); + + /* MIPHY TX control */ + writeb_relaxed(0x00, base + MIPHY_CONF); + + /* Validate Step component */ + writeb_relaxed(0x5a, base + MIPHY_PLL_SBR_3); + writeb_relaxed(0xa0, base + MIPHY_PLL_SBR_4); + + /* Validate Period component */ + writeb_relaxed(0x3c, base + MIPHY_PLL_SBR_2); + writeb_relaxed(0xa1, base + MIPHY_PLL_SBR_4); + + /* Clear any previous request */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* requests the PLL to take in account new parameters */ + writeb_relaxed(0x02, base + MIPHY_PLL_SBR_1); + + /* To be sure there is no other pending requests */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* Rx PI controller settings */ + writeb_relaxed(0xca, base + MIPHY_RX_K_GAIN); + + /* MIPHY RX input bridge control */ + /* INPUT_BRIDGE_EN_SW=1, manual input bridge control[0]=1 */ + writeb_relaxed(0x21, base + MIPHY_RX_POWER_CTRL_1); + writeb_relaxed(0x29, base + MIPHY_RX_POWER_CTRL_1); + writeb_relaxed(0x1a, base + MIPHY_RX_POWER_CTRL_2); + + /* MIPHY Reset for usb3 */ + miphy28_usb3_miphy_reset(miphy_phy); +} + +static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy) +{ + unsigned long finish = jiffies + 5 * HZ; + u8 mask = HFC_PLL | HFC_RDY; + u8 val; + + /* + * For PCIe and USB3 check only that PLL and HFC are ready + * For SATA check also that phy is ready! + */ + if (miphy_phy->type == PHY_TYPE_SATA) + mask |= PHY_RDY; + + do { + val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1); + if ((val & mask) != mask) + cpu_relax(); + else + return 0; + } while (!time_after_eq(jiffies, finish)); + + return -EBUSY; +} + +static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + unsigned long finish = jiffies + 5 * HZ; + u32 val; + + if (!miphy_phy->osc_rdy) + return 0; + + if (!miphy_phy->syscfg_reg[SYSCFG_STATUS]) + return -EINVAL; + + do { + regmap_read(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_STATUS], &val); + + if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY) + cpu_relax(); + else + return 0; + } while (!time_after_eq(jiffies, finish)); + + return -EBUSY; +} + +static int miphy28lp_get_resource_byname(struct device_node *child, + char *rname, struct resource *res) +{ + int index; + + index = of_property_match_string(child, "reg-names", rname); + if (index < 0) + return -ENODEV; + + return of_address_to_resource(child, index, res); +} + +static int miphy28lp_get_one_addr(struct device *dev, + struct device_node *child, char *rname, + void __iomem **base) +{ + struct resource res; + int ret; + + ret = miphy28lp_get_resource_byname(child, rname, &res); + if (!ret) { + *base = devm_ioremap(dev, res.start, resource_size(&res)); + if (!*base) { + dev_err(dev, "failed to ioremap %s address region\n" + , rname); + return -ENOENT; + } + } + + return 0; +} + +/* MiPHY reset and sysconf setup */ +static int miphy28lp_setup(struct miphy28lp_phy *miphy_phy, u32 miphy_val) +{ + int err; + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + + if (!miphy_phy->syscfg_reg[SYSCFG_CTRL]) + return -EINVAL; + + err = reset_control_assert(miphy_phy->miphy_rst); + if (err) { + dev_err(miphy_dev->dev, "unable to bring out of miphy reset\n"); + return err; + } + + if (miphy_phy->osc_force_ext) + miphy_val |= MIPHY_OSC_FORCE_EXT; + + regmap_update_bits(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_CTRL], + MIPHY_CTRL_MASK, miphy_val); + + err = reset_control_deassert(miphy_phy->miphy_rst); + if (err) { + dev_err(miphy_dev->dev, "unable to bring out of miphy reset\n"); + return err; + } + + return miphy_osc_is_ready(miphy_phy); +} + +static int miphy28lp_init_sata(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err, sata_conf = SATA_CTRL_SELECT_SATA; + + if ((!miphy_phy->syscfg_reg[SYSCFG_SATA]) || + (!miphy_phy->syscfg_reg[SYSCFG_PCI]) || + (!miphy_phy->base)) + return -EINVAL; + + dev_info(miphy_dev->dev, "sata-up mode, addr 0x%p\n", miphy_phy->base); + + /* Configure the glue-logic */ + sata_conf |= ((miphy_phy->sata_gen - SATA_GEN1) << SATA_SPDMODE); + + regmap_update_bits(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_SATA], + SATA_CTRL_MASK, sata_conf); + + regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_reg[SYSCFG_PCI], + PCIE_CTRL_MASK, SATA_CTRL_SELECT_PCIE); + + /* MiPHY path and clocking init */ + err = miphy28lp_setup(miphy_phy, MIPHY_CTRL_DEFAULT); + + if (err) { + dev_err(miphy_dev->dev, "SATA phy setup failed\n"); + return err; + } + + /* initialize miphy */ + miphy28lp_configure_sata(miphy_phy); + + return miphy_is_ready(miphy_phy); +} + +static int miphy28lp_init_pcie(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err; + + if ((!miphy_phy->syscfg_reg[SYSCFG_SATA]) || + (!miphy_phy->syscfg_reg[SYSCFG_PCI]) + || (!miphy_phy->base) || (!miphy_phy->pipebase)) + return -EINVAL; + + dev_info(miphy_dev->dev, "pcie-up mode, addr 0x%p\n", miphy_phy->base); + + /* Configure the glue-logic */ + regmap_update_bits(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_SATA], + SATA_CTRL_MASK, SATA_CTRL_SELECT_PCIE); + + regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_reg[SYSCFG_PCI], + PCIE_CTRL_MASK, SYSCFG_PCIE_PCIE_VAL); + + /* MiPHY path and clocking init */ + err = miphy28lp_setup(miphy_phy, MIPHY_CTRL_DEFAULT); + + if (err) { + dev_err(miphy_dev->dev, "PCIe phy setup failed\n"); + return err; + } + + /* initialize miphy */ + err = miphy28lp_configure_pcie(miphy_phy); + if (err) + return err; + + /* PIPE Wrapper Configuration */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x104); /* Rise_0 */ + writeb_relaxed(0x61, miphy_phy->pipebase + 0x105); /* Rise_1 */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x108); /* Fall_0 */ + writeb_relaxed(0x61, miphy_phy->pipebase + 0x109); /* Fall-1 */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x10c); /* Threshold_0 */ + writeb_relaxed(0x60, miphy_phy->pipebase + 0x10d); /* Threshold_1 */ + + /* Wait for phy_ready */ + return miphy_is_ready(miphy_phy); +} + +static int miphy28lp_init_usb3(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err; + + if ((!miphy_phy->base) || (!miphy_phy->pipebase)) + return -EINVAL; + + dev_info(miphy_dev->dev, "usb3-up mode, addr 0x%p\n", miphy_phy->base); + + /* MiPHY path and clocking init */ + err = miphy28lp_setup(miphy_phy, MIPHY_CTRL_SYNC_D_EN); + if (err) { + dev_err(miphy_dev->dev, "USB3 phy setup failed\n"); + return err; + } + + /* initialize miphy */ + miphy28lp_configure_usb3(miphy_phy); + + /* PIPE Wrapper Configuration */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x23); + writeb_relaxed(0x61, miphy_phy->pipebase + 0x24); + writeb_relaxed(0x68, miphy_phy->pipebase + 0x26); + writeb_relaxed(0x61, miphy_phy->pipebase + 0x27); + writeb_relaxed(0x18, miphy_phy->pipebase + 0x29); + writeb_relaxed(0x61, miphy_phy->pipebase + 0x2a); + + /* pipe Wrapper usb3 TX swing de-emph margin PREEMPH[7:4], SWING[3:0] */ + writeb_relaxed(0X67, miphy_phy->pipebase + 0x68); + writeb_relaxed(0x0d, miphy_phy->pipebase + 0x69); + writeb_relaxed(0X67, miphy_phy->pipebase + 0x6a); + writeb_relaxed(0X0d, miphy_phy->pipebase + 0x6b); + writeb_relaxed(0X67, miphy_phy->pipebase + 0x6c); + writeb_relaxed(0X0d, miphy_phy->pipebase + 0x6d); + writeb_relaxed(0X67, miphy_phy->pipebase + 0x6e); + writeb_relaxed(0X0d, miphy_phy->pipebase + 0x6f); + + return miphy_is_ready(miphy_phy); +} + +static int miphy28lp_init(struct phy *phy) +{ + struct miphy28lp_phy *miphy_phy = phy_get_drvdata(phy); + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int ret; + + mutex_lock(&miphy_dev->miphy_mutex); + + switch (miphy_phy->type) { + + case PHY_TYPE_SATA: + ret = miphy28lp_init_sata(miphy_phy); + break; + case PHY_TYPE_PCIE: + ret = miphy28lp_init_pcie(miphy_phy); + break; + case PHY_TYPE_USB3: + ret = miphy28lp_init_usb3(miphy_phy); + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&miphy_dev->miphy_mutex); + + return ret; +} + +static int miphy28lp_get_addr(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + struct device_node *phynode = miphy_phy->phy->dev.of_node; + int err; + + if ((miphy_phy->type != PHY_TYPE_SATA) && + (miphy_phy->type != PHY_TYPE_PCIE) && + (miphy_phy->type != PHY_TYPE_USB3)) { + return -EINVAL; + } + + err = miphy28lp_get_one_addr(miphy_dev->dev, phynode, + PHY_TYPE_name[miphy_phy->type - PHY_TYPE_SATA], + &miphy_phy->base); + if (err) + return err; + + if ((miphy_phy->type == PHY_TYPE_PCIE) || + (miphy_phy->type == PHY_TYPE_USB3)) { + err = miphy28lp_get_one_addr(miphy_dev->dev, phynode, "pipew", + &miphy_phy->pipebase); + if (err) + return err; + } + + return 0; +} + +static struct phy *miphy28lp_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct miphy28lp_dev *miphy_dev = dev_get_drvdata(dev); + struct miphy28lp_phy *miphy_phy = NULL; + struct device_node *phynode = args->np; + int ret, index = 0; + + if (args->args_count != 1) { + dev_err(dev, "Invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < miphy_dev->nphys; index++) + if (phynode == miphy_dev->phys[index]->phy->dev.of_node) { + miphy_phy = miphy_dev->phys[index]; + break; + } + + if (!miphy_phy) { + dev_err(dev, "Failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + miphy_phy->type = args->args[0]; + + ret = miphy28lp_get_addr(miphy_phy); + if (ret < 0) + return ERR_PTR(ret); + + return miphy_phy->phy; +} + +static const struct phy_ops miphy28lp_ops = { + .init = miphy28lp_init, + .owner = THIS_MODULE, +}; + +static int miphy28lp_probe_resets(struct device_node *node, + struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err; + + miphy_phy->miphy_rst = + of_reset_control_get_shared(node, "miphy-sw-rst"); + + if (IS_ERR(miphy_phy->miphy_rst)) { + dev_err(miphy_dev->dev, + "miphy soft reset control not defined\n"); + return PTR_ERR(miphy_phy->miphy_rst); + } + + err = reset_control_deassert(miphy_phy->miphy_rst); + if (err) { + dev_err(miphy_dev->dev, "unable to bring out of miphy reset\n"); + return err; + } + + return 0; +} + +static int miphy28lp_of_probe(struct device_node *np, + struct miphy28lp_phy *miphy_phy) +{ + int i; + u32 ctrlreg; + + miphy_phy->osc_force_ext = + of_property_read_bool(np, "st,osc-force-ext"); + + miphy_phy->osc_rdy = of_property_read_bool(np, "st,osc-rdy"); + + miphy_phy->px_rx_pol_inv = + of_property_read_bool(np, "st,px_rx_pol_inv"); + + miphy_phy->ssc = of_property_read_bool(np, "st,ssc-on"); + + miphy_phy->tx_impedance = + of_property_read_bool(np, "st,tx-impedance-comp"); + + of_property_read_u32(np, "st,sata-gen", &miphy_phy->sata_gen); + if (!miphy_phy->sata_gen) + miphy_phy->sata_gen = SATA_GEN1; + + for (i = 0; i < SYSCFG_REG_MAX; i++) { + if (!of_property_read_u32_index(np, "st,syscfg", i, &ctrlreg)) + miphy_phy->syscfg_reg[i] = ctrlreg; + } + + return 0; +} + +static int miphy28lp_probe(struct platform_device *pdev) +{ + struct device_node *child, *np = pdev->dev.of_node; + struct miphy28lp_dev *miphy_dev; + struct phy_provider *provider; + struct phy *phy; + int ret, port = 0; + + miphy_dev = devm_kzalloc(&pdev->dev, sizeof(*miphy_dev), GFP_KERNEL); + if (!miphy_dev) + return -ENOMEM; + + miphy_dev->nphys = of_get_child_count(np); + miphy_dev->phys = devm_kcalloc(&pdev->dev, miphy_dev->nphys, + sizeof(*miphy_dev->phys), GFP_KERNEL); + if (!miphy_dev->phys) + return -ENOMEM; + + miphy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(miphy_dev->regmap)) { + dev_err(miphy_dev->dev, "No syscfg phandle specified\n"); + return PTR_ERR(miphy_dev->regmap); + } + + miphy_dev->dev = &pdev->dev; + + dev_set_drvdata(&pdev->dev, miphy_dev); + + mutex_init(&miphy_dev->miphy_mutex); + + for_each_child_of_node(np, child) { + struct miphy28lp_phy *miphy_phy; + + miphy_phy = devm_kzalloc(&pdev->dev, sizeof(*miphy_phy), + GFP_KERNEL); + if (!miphy_phy) { + ret = -ENOMEM; + goto put_child; + } + + miphy_dev->phys[port] = miphy_phy; + + phy = devm_phy_create(&pdev->dev, child, &miphy28lp_ops); + if (IS_ERR(phy)) { + dev_err(&pdev->dev, "failed to create PHY\n"); + ret = PTR_ERR(phy); + goto put_child; + } + + miphy_dev->phys[port]->phy = phy; + miphy_dev->phys[port]->phydev = miphy_dev; + + ret = miphy28lp_of_probe(child, miphy_phy); + if (ret) + goto put_child; + + ret = miphy28lp_probe_resets(child, miphy_dev->phys[port]); + if (ret) + goto put_child; + + phy_set_drvdata(phy, miphy_dev->phys[port]); + port++; + + } + + provider = devm_of_phy_provider_register(&pdev->dev, miphy28lp_xlate); + return PTR_ERR_OR_ZERO(provider); +put_child: + of_node_put(child); + return ret; +} + +static const struct of_device_id miphy28lp_of_match[] = { + {.compatible = "st,miphy28lp-phy", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, miphy28lp_of_match); + +static struct platform_driver miphy28lp_driver = { + .probe = miphy28lp_probe, + .driver = { + .name = "miphy28lp-phy", + .of_match_table = miphy28lp_of_match, + } +}; + +module_platform_driver(miphy28lp_driver); + +MODULE_AUTHOR("Alexandre Torgue "); +MODULE_DESCRIPTION("STMicroelectronics miphy28lp driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3