From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/pinctrl/samsung/pinctrl-s3c64xx.c | 806 ++++++++++++++++++++++++++++++ 1 file changed, 806 insertions(+) create mode 100644 drivers/pinctrl/samsung/pinctrl-s3c64xx.c (limited to 'drivers/pinctrl/samsung/pinctrl-s3c64xx.c') diff --git a/drivers/pinctrl/samsung/pinctrl-s3c64xx.c b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c new file mode 100644 index 000000000..c5d92db4f --- /dev/null +++ b/drivers/pinctrl/samsung/pinctrl-s3c64xx.c @@ -0,0 +1,806 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// S3C64xx specific support for pinctrl-samsung driver. +// +// Copyright (c) 2013 Tomasz Figa +// +// Based on pinctrl-exynos.c, please see the file for original copyrights. +// +// This file contains the Samsung S3C64xx specific information required by the +// the Samsung pinctrl/gpiolib driver. It also includes the implementation of +// external gpio and wakeup interrupt support. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-samsung.h" + +#define NUM_EINT0 28 +#define NUM_EINT0_IRQ 4 +#define EINT_MAX_PER_REG 16 +#define EINT_MAX_PER_GROUP 16 + +/* External GPIO and wakeup interrupt related definitions */ +#define SVC_GROUP_SHIFT 4 +#define SVC_GROUP_MASK 0xf +#define SVC_NUM_MASK 0xf +#define SVC_GROUP(x) ((x >> SVC_GROUP_SHIFT) & \ + SVC_GROUP_MASK) + +#define EINT12CON_REG 0x200 +#define EINT12MASK_REG 0x240 +#define EINT12PEND_REG 0x260 + +#define EINT_OFFS(i) ((i) % (2 * EINT_MAX_PER_GROUP)) +#define EINT_GROUP(i) ((i) / EINT_MAX_PER_GROUP) +#define EINT_REG(g) (4 * ((g) / 2)) + +#define EINTCON_REG(i) (EINT12CON_REG + EINT_REG(EINT_GROUP(i))) +#define EINTMASK_REG(i) (EINT12MASK_REG + EINT_REG(EINT_GROUP(i))) +#define EINTPEND_REG(i) (EINT12PEND_REG + EINT_REG(EINT_GROUP(i))) + +#define SERVICE_REG 0x284 +#define SERVICEPEND_REG 0x288 + +#define EINT0CON0_REG 0x900 +#define EINT0MASK_REG 0x920 +#define EINT0PEND_REG 0x924 + +/* S3C64xx specific external interrupt trigger types */ +#define EINT_LEVEL_LOW 0 +#define EINT_LEVEL_HIGH 1 +#define EINT_EDGE_FALLING 2 +#define EINT_EDGE_RISING 4 +#define EINT_EDGE_BOTH 6 +#define EINT_CON_MASK 0xF +#define EINT_CON_LEN 4 + +static const struct samsung_pin_bank_type bank_type_4bit_off = { + .fld_width = { 4, 1, 2, 0, 2, 2, }, + .reg_offset = { 0x00, 0x04, 0x08, 0, 0x0c, 0x10, }, +}; + +static const struct samsung_pin_bank_type bank_type_4bit_alive = { + .fld_width = { 4, 1, 2, }, + .reg_offset = { 0x00, 0x04, 0x08, }, +}; + +static const struct samsung_pin_bank_type bank_type_4bit2_off = { + .fld_width = { 4, 1, 2, 0, 2, 2, }, + .reg_offset = { 0x00, 0x08, 0x0c, 0, 0x10, 0x14, }, +}; + +static const struct samsung_pin_bank_type bank_type_4bit2_alive = { + .fld_width = { 4, 1, 2, }, + .reg_offset = { 0x00, 0x08, 0x0c, }, +}; + +static const struct samsung_pin_bank_type bank_type_2bit_off = { + .fld_width = { 2, 1, 2, 0, 2, 2, }, + .reg_offset = { 0x00, 0x04, 0x08, 0, 0x0c, 0x10, }, +}; + +static const struct samsung_pin_bank_type bank_type_2bit_alive = { + .fld_width = { 2, 1, 2, }, + .reg_offset = { 0x00, 0x04, 0x08, }, +}; + +#define PIN_BANK_4BIT(pins, reg, id) \ + { \ + .type = &bank_type_4bit_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define PIN_BANK_4BIT_EINTG(pins, reg, id, eoffs) \ + { \ + .type = &bank_type_4bit_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_func = 7, \ + .eint_mask = (1 << (pins)) - 1, \ + .eint_offset = eoffs, \ + .name = id \ + } + +#define PIN_BANK_4BIT_EINTW(pins, reg, id, eoffs, emask) \ + { \ + .type = &bank_type_4bit_alive,\ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_func = 3, \ + .eint_mask = emask, \ + .eint_offset = eoffs, \ + .name = id \ + } + +#define PIN_BANK_4BIT2_EINTG(pins, reg, id, eoffs) \ + { \ + .type = &bank_type_4bit2_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_func = 7, \ + .eint_mask = (1 << (pins)) - 1, \ + .eint_offset = eoffs, \ + .name = id \ + } + +#define PIN_BANK_4BIT2_EINTW(pins, reg, id, eoffs, emask) \ + { \ + .type = &bank_type_4bit2_alive,\ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_func = 3, \ + .eint_mask = emask, \ + .eint_offset = eoffs, \ + .name = id \ + } + +#define PIN_BANK_4BIT2_ALIVE(pins, reg, id) \ + { \ + .type = &bank_type_4bit2_alive,\ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define PIN_BANK_2BIT(pins, reg, id) \ + { \ + .type = &bank_type_2bit_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define PIN_BANK_2BIT_EINTG(pins, reg, id, eoffs, emask) \ + { \ + .type = &bank_type_2bit_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_func = 3, \ + .eint_mask = emask, \ + .eint_offset = eoffs, \ + .name = id \ + } + +#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs) \ + { \ + .type = &bank_type_2bit_alive,\ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_func = 2, \ + .eint_mask = (1 << (pins)) - 1, \ + .eint_offset = eoffs, \ + .name = id \ + } + +/** + * struct s3c64xx_eint0_data - EINT0 common data + * @drvdata: pin controller driver data + * @domains: IRQ domains of particular EINT0 interrupts + * @pins: pin offsets inside of banks of particular EINT0 interrupts + */ +struct s3c64xx_eint0_data { + struct samsung_pinctrl_drv_data *drvdata; + struct irq_domain *domains[NUM_EINT0]; + u8 pins[NUM_EINT0]; +}; + +/** + * struct s3c64xx_eint0_domain_data - EINT0 per-domain data + * @bank: pin bank related to the domain + * @eints: EINT0 interrupts related to the domain + */ +struct s3c64xx_eint0_domain_data { + struct samsung_pin_bank *bank; + u8 eints[]; +}; + +/** + * struct s3c64xx_eint_gpio_data - GPIO EINT data + * @drvdata: pin controller driver data + * @domains: array of domains related to EINT interrupt groups + */ +struct s3c64xx_eint_gpio_data { + struct samsung_pinctrl_drv_data *drvdata; + struct irq_domain *domains[]; +}; + +/* + * Common functions for S3C64xx EINT configuration + */ + +static int s3c64xx_irq_get_trigger(unsigned int type) +{ + int trigger; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + trigger = EINT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + trigger = EINT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + trigger = EINT_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + trigger = EINT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + trigger = EINT_LEVEL_LOW; + break; + default: + return -EINVAL; + } + + return trigger; +} + +static void s3c64xx_irq_set_handler(struct irq_data *d, unsigned int type) +{ + /* Edge- and level-triggered interrupts need different handlers */ + if (type & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(d, handle_edge_irq); + else + irq_set_handler_locked(d, handle_level_irq); +} + +static void s3c64xx_irq_set_function(struct samsung_pinctrl_drv_data *d, + struct samsung_pin_bank *bank, int pin) +{ + const struct samsung_pin_bank_type *bank_type = bank->type; + unsigned long flags; + void __iomem *reg; + u8 shift; + u32 mask; + u32 val; + + /* Make sure that pin is configured as interrupt */ + reg = d->virt_base + bank->pctl_offset; + shift = pin; + if (bank_type->fld_width[PINCFG_TYPE_FUNC] * shift >= 32) { + /* 4-bit bank type with 2 con regs */ + reg += 4; + shift -= 8; + } + + shift = shift * bank_type->fld_width[PINCFG_TYPE_FUNC]; + mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; + + raw_spin_lock_irqsave(&bank->slock, flags); + + val = readl(reg); + val &= ~(mask << shift); + val |= bank->eint_func << shift; + writel(val, reg); + + raw_spin_unlock_irqrestore(&bank->slock, flags); +} + +/* + * Functions for EINT GPIO configuration (EINT groups 1-9) + */ + +static inline void s3c64xx_gpio_irq_set_mask(struct irq_data *irqd, bool mask) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned char index = EINT_OFFS(bank->eint_offset) + irqd->hwirq; + void __iomem *reg = d->virt_base + EINTMASK_REG(bank->eint_offset); + u32 val; + + val = readl(reg); + if (mask) + val |= 1 << index; + else + val &= ~(1 << index); + writel(val, reg); +} + +static void s3c64xx_gpio_irq_unmask(struct irq_data *irqd) +{ + s3c64xx_gpio_irq_set_mask(irqd, false); +} + +static void s3c64xx_gpio_irq_mask(struct irq_data *irqd) +{ + s3c64xx_gpio_irq_set_mask(irqd, true); +} + +static void s3c64xx_gpio_irq_ack(struct irq_data *irqd) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned char index = EINT_OFFS(bank->eint_offset) + irqd->hwirq; + void __iomem *reg = d->virt_base + EINTPEND_REG(bank->eint_offset); + + writel(1 << index, reg); +} + +static int s3c64xx_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + void __iomem *reg; + int trigger; + u8 shift; + u32 val; + + trigger = s3c64xx_irq_get_trigger(type); + if (trigger < 0) { + pr_err("unsupported external interrupt type\n"); + return -EINVAL; + } + + s3c64xx_irq_set_handler(irqd, type); + + /* Set up interrupt trigger */ + reg = d->virt_base + EINTCON_REG(bank->eint_offset); + shift = EINT_OFFS(bank->eint_offset) + irqd->hwirq; + shift = 4 * (shift / 4); /* 4 EINTs per trigger selector */ + + val = readl(reg); + val &= ~(EINT_CON_MASK << shift); + val |= trigger << shift; + writel(val, reg); + + s3c64xx_irq_set_function(d, bank, irqd->hwirq); + + return 0; +} + +/* + * irq_chip for gpio interrupts. + */ +static struct irq_chip s3c64xx_gpio_irq_chip = { + .name = "GPIO", + .irq_unmask = s3c64xx_gpio_irq_unmask, + .irq_mask = s3c64xx_gpio_irq_mask, + .irq_ack = s3c64xx_gpio_irq_ack, + .irq_set_type = s3c64xx_gpio_irq_set_type, +}; + +static int s3c64xx_gpio_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct samsung_pin_bank *bank = h->host_data; + + if (!(bank->eint_mask & (1 << hw))) + return -EINVAL; + + irq_set_chip_and_handler(virq, + &s3c64xx_gpio_irq_chip, handle_level_irq); + irq_set_chip_data(virq, bank); + + return 0; +} + +/* + * irq domain callbacks for external gpio interrupt controller. + */ +static const struct irq_domain_ops s3c64xx_gpio_irqd_ops = { + .map = s3c64xx_gpio_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +static void s3c64xx_eint_gpio_irq(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct s3c64xx_eint_gpio_data *data = irq_desc_get_handler_data(desc); + struct samsung_pinctrl_drv_data *drvdata = data->drvdata; + + chained_irq_enter(chip, desc); + + do { + unsigned int svc; + unsigned int group; + unsigned int pin; + int ret; + + svc = readl(drvdata->virt_base + SERVICE_REG); + group = SVC_GROUP(svc); + pin = svc & SVC_NUM_MASK; + + if (!group) + break; + + /* Group 1 is used for two pin banks */ + if (group == 1) { + if (pin < 8) + group = 0; + else + pin -= 8; + } + + ret = generic_handle_domain_irq(data->domains[group], pin); + /* + * Something must be really wrong if an unmapped EINT + * was unmasked... + */ + BUG_ON(ret); + } while (1); + + chained_irq_exit(chip, desc); +} + +/** + * s3c64xx_eint_gpio_init() - setup handling of external gpio interrupts. + * @d: driver data of samsung pinctrl driver. + */ +static int s3c64xx_eint_gpio_init(struct samsung_pinctrl_drv_data *d) +{ + struct s3c64xx_eint_gpio_data *data; + struct samsung_pin_bank *bank; + struct device *dev = d->dev; + unsigned int nr_domains; + unsigned int i; + + if (!d->irq) { + dev_err(dev, "irq number not available\n"); + return -EINVAL; + } + + nr_domains = 0; + bank = d->pin_banks; + for (i = 0; i < d->nr_banks; ++i, ++bank) { + unsigned int nr_eints; + unsigned int mask; + + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + + mask = bank->eint_mask; + nr_eints = fls(mask); + + bank->irq_domain = irq_domain_create_linear(bank->fwnode, + nr_eints, &s3c64xx_gpio_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "gpio irq domain add failed\n"); + return -ENXIO; + } + + ++nr_domains; + } + + data = devm_kzalloc(dev, struct_size(data, domains, nr_domains), + GFP_KERNEL); + if (!data) + return -ENOMEM; + data->drvdata = d; + + bank = d->pin_banks; + nr_domains = 0; + for (i = 0; i < d->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + + data->domains[nr_domains++] = bank->irq_domain; + } + + irq_set_chained_handler_and_data(d->irq, s3c64xx_eint_gpio_irq, data); + + return 0; +} + +/* + * Functions for configuration of EINT0 wake-up interrupts + */ + +static inline void s3c64xx_eint0_irq_set_mask(struct irq_data *irqd, bool mask) +{ + struct s3c64xx_eint0_domain_data *ddata = + irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = ddata->bank->drvdata; + u32 val; + + val = readl(d->virt_base + EINT0MASK_REG); + if (mask) + val |= 1 << ddata->eints[irqd->hwirq]; + else + val &= ~(1 << ddata->eints[irqd->hwirq]); + writel(val, d->virt_base + EINT0MASK_REG); +} + +static void s3c64xx_eint0_irq_unmask(struct irq_data *irqd) +{ + s3c64xx_eint0_irq_set_mask(irqd, false); +} + +static void s3c64xx_eint0_irq_mask(struct irq_data *irqd) +{ + s3c64xx_eint0_irq_set_mask(irqd, true); +} + +static void s3c64xx_eint0_irq_ack(struct irq_data *irqd) +{ + struct s3c64xx_eint0_domain_data *ddata = + irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = ddata->bank->drvdata; + + writel(1 << ddata->eints[irqd->hwirq], + d->virt_base + EINT0PEND_REG); +} + +static int s3c64xx_eint0_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct s3c64xx_eint0_domain_data *ddata = + irq_data_get_irq_chip_data(irqd); + struct samsung_pin_bank *bank = ddata->bank; + struct samsung_pinctrl_drv_data *d = bank->drvdata; + void __iomem *reg; + int trigger; + u8 shift; + u32 val; + + trigger = s3c64xx_irq_get_trigger(type); + if (trigger < 0) { + pr_err("unsupported external interrupt type\n"); + return -EINVAL; + } + + s3c64xx_irq_set_handler(irqd, type); + + /* Set up interrupt trigger */ + reg = d->virt_base + EINT0CON0_REG; + shift = ddata->eints[irqd->hwirq]; + if (shift >= EINT_MAX_PER_REG) { + reg += 4; + shift -= EINT_MAX_PER_REG; + } + shift = EINT_CON_LEN * (shift / 2); + + val = readl(reg); + val &= ~(EINT_CON_MASK << shift); + val |= trigger << shift; + writel(val, reg); + + s3c64xx_irq_set_function(d, bank, irqd->hwirq); + + return 0; +} + +/* + * irq_chip for wakeup interrupts + */ +static struct irq_chip s3c64xx_eint0_irq_chip = { + .name = "EINT0", + .irq_unmask = s3c64xx_eint0_irq_unmask, + .irq_mask = s3c64xx_eint0_irq_mask, + .irq_ack = s3c64xx_eint0_irq_ack, + .irq_set_type = s3c64xx_eint0_irq_set_type, +}; + +static inline void s3c64xx_irq_demux_eint(struct irq_desc *desc, u32 range) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct s3c64xx_eint0_data *data = irq_desc_get_handler_data(desc); + struct samsung_pinctrl_drv_data *drvdata = data->drvdata; + unsigned int pend, mask; + + chained_irq_enter(chip, desc); + + pend = readl(drvdata->virt_base + EINT0PEND_REG); + mask = readl(drvdata->virt_base + EINT0MASK_REG); + + pend = pend & range & ~mask; + pend &= range; + + while (pend) { + unsigned int irq; + int ret; + + irq = fls(pend) - 1; + pend &= ~(1 << irq); + ret = generic_handle_domain_irq(data->domains[irq], data->pins[irq]); + /* + * Something must be really wrong if an unmapped EINT + * was unmasked... + */ + BUG_ON(ret); + } + + chained_irq_exit(chip, desc); +} + +static void s3c64xx_demux_eint0_3(struct irq_desc *desc) +{ + s3c64xx_irq_demux_eint(desc, 0xf); +} + +static void s3c64xx_demux_eint4_11(struct irq_desc *desc) +{ + s3c64xx_irq_demux_eint(desc, 0xff0); +} + +static void s3c64xx_demux_eint12_19(struct irq_desc *desc) +{ + s3c64xx_irq_demux_eint(desc, 0xff000); +} + +static void s3c64xx_demux_eint20_27(struct irq_desc *desc) +{ + s3c64xx_irq_demux_eint(desc, 0xff00000); +} + +static irq_flow_handler_t s3c64xx_eint0_handlers[NUM_EINT0_IRQ] = { + s3c64xx_demux_eint0_3, + s3c64xx_demux_eint4_11, + s3c64xx_demux_eint12_19, + s3c64xx_demux_eint20_27, +}; + +static int s3c64xx_eint0_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct s3c64xx_eint0_domain_data *ddata = h->host_data; + struct samsung_pin_bank *bank = ddata->bank; + + if (!(bank->eint_mask & (1 << hw))) + return -EINVAL; + + irq_set_chip_and_handler(virq, + &s3c64xx_eint0_irq_chip, handle_level_irq); + irq_set_chip_data(virq, ddata); + + return 0; +} + +/* + * irq domain callbacks for external wakeup interrupt controller. + */ +static const struct irq_domain_ops s3c64xx_eint0_irqd_ops = { + .map = s3c64xx_eint0_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +/* list of external wakeup controllers supported */ +static const struct of_device_id s3c64xx_eint0_irq_ids[] = { + { .compatible = "samsung,s3c64xx-wakeup-eint", }, + { } +}; + +/** + * s3c64xx_eint_eint0_init() - setup handling of external wakeup interrupts. + * @d: driver data of samsung pinctrl driver. + */ +static int s3c64xx_eint_eint0_init(struct samsung_pinctrl_drv_data *d) +{ + struct device *dev = d->dev; + struct device_node *eint0_np = NULL; + struct device_node *np; + struct samsung_pin_bank *bank; + struct s3c64xx_eint0_data *data; + unsigned int i; + + for_each_child_of_node(dev->of_node, np) { + if (of_match_node(s3c64xx_eint0_irq_ids, np)) { + eint0_np = np; + break; + } + } + if (!eint0_np) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) { + of_node_put(eint0_np); + return -ENOMEM; + } + data->drvdata = d; + + for (i = 0; i < NUM_EINT0_IRQ; ++i) { + unsigned int irq; + + irq = irq_of_parse_and_map(eint0_np, i); + if (!irq) { + dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i); + of_node_put(eint0_np); + return -ENXIO; + } + + irq_set_chained_handler_and_data(irq, + s3c64xx_eint0_handlers[i], + data); + } + of_node_put(eint0_np); + + bank = d->pin_banks; + for (i = 0; i < d->nr_banks; ++i, ++bank) { + struct s3c64xx_eint0_domain_data *ddata; + unsigned int nr_eints; + unsigned int mask; + unsigned int irq; + unsigned int pin; + + if (bank->eint_type != EINT_TYPE_WKUP) + continue; + + mask = bank->eint_mask; + nr_eints = fls(mask); + + ddata = devm_kzalloc(dev, + sizeof(*ddata) + nr_eints, GFP_KERNEL); + if (!ddata) + return -ENOMEM; + ddata->bank = bank; + + bank->irq_domain = irq_domain_create_linear(bank->fwnode, + nr_eints, &s3c64xx_eint0_irqd_ops, ddata); + if (!bank->irq_domain) { + dev_err(dev, "wkup irq domain add failed\n"); + return -ENXIO; + } + + irq = bank->eint_offset; + mask = bank->eint_mask; + for (pin = 0; mask; ++pin, mask >>= 1) { + if (!(mask & 1)) + continue; + data->domains[irq] = bank->irq_domain; + data->pins[irq] = pin; + ddata->eints[pin] = irq; + ++irq; + } + } + + return 0; +} + +/* pin banks of s3c64xx pin-controller 0 */ +static const struct samsung_pin_bank_data s3c64xx_pin_banks0[] __initconst = { + PIN_BANK_4BIT_EINTG(8, 0x000, "gpa", 0), + PIN_BANK_4BIT_EINTG(7, 0x020, "gpb", 8), + PIN_BANK_4BIT_EINTG(8, 0x040, "gpc", 16), + PIN_BANK_4BIT_EINTG(5, 0x060, "gpd", 32), + PIN_BANK_4BIT(5, 0x080, "gpe"), + PIN_BANK_2BIT_EINTG(16, 0x0a0, "gpf", 48, 0x3fff), + PIN_BANK_4BIT_EINTG(7, 0x0c0, "gpg", 64), + PIN_BANK_4BIT2_EINTG(10, 0x0e0, "gph", 80), + PIN_BANK_2BIT(16, 0x100, "gpi"), + PIN_BANK_2BIT(12, 0x120, "gpj"), + PIN_BANK_4BIT2_ALIVE(16, 0x800, "gpk"), + PIN_BANK_4BIT2_EINTW(15, 0x810, "gpl", 16, 0x7f00), + PIN_BANK_4BIT_EINTW(6, 0x820, "gpm", 23, 0x1f), + PIN_BANK_2BIT_EINTW(16, 0x830, "gpn", 0), + PIN_BANK_2BIT_EINTG(16, 0x140, "gpo", 96, 0xffff), + PIN_BANK_2BIT_EINTG(15, 0x160, "gpp", 112, 0x7fff), + PIN_BANK_2BIT_EINTG(9, 0x180, "gpq", 128, 0x1ff), +}; + +/* + * Samsung pinctrl driver data for S3C64xx SoC. S3C64xx SoC includes + * one gpio/pin-mux/pinconfig controller. + */ +static const struct samsung_pin_ctrl s3c64xx_pin_ctrl[] __initconst = { + { + /* pin-controller instance 1 data */ + .pin_banks = s3c64xx_pin_banks0, + .nr_banks = ARRAY_SIZE(s3c64xx_pin_banks0), + .eint_gpio_init = s3c64xx_eint_gpio_init, + .eint_wkup_init = s3c64xx_eint_eint0_init, + }, +}; + +const struct samsung_pinctrl_of_match_data s3c64xx_of_data __initconst = { + .ctrl = s3c64xx_pin_ctrl, + .num_ctrl = ARRAY_SIZE(s3c64xx_pin_ctrl), +}; -- cgit v1.2.3