From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/platform/chrome/wilco_ec/mailbox.c | 215 +++++++++++++++++++++++++++++ 1 file changed, 215 insertions(+) create mode 100644 drivers/platform/chrome/wilco_ec/mailbox.c (limited to 'drivers/platform/chrome/wilco_ec/mailbox.c') diff --git a/drivers/platform/chrome/wilco_ec/mailbox.c b/drivers/platform/chrome/wilco_ec/mailbox.c new file mode 100644 index 000000000..0f98358ea --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/mailbox.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Mailbox interface for Wilco Embedded Controller + * + * Copyright 2018 Google LLC + * + * The Wilco EC is similar to a typical ChromeOS embedded controller. + * It uses the same MEC based low-level communication and a similar + * protocol, but with some important differences. The EC firmware does + * not support the same mailbox commands so it is not registered as a + * cros_ec device type. + * + * Most messages follow a standard format, but there are some exceptions + * and an interface is provided to do direct/raw transactions that do not + * make assumptions about byte placement. + */ + +#include +#include +#include +#include +#include + +#include "../cros_ec_lpc_mec.h" + +/* Version of mailbox interface */ +#define EC_MAILBOX_VERSION 0 + +/* Command to start mailbox transaction */ +#define EC_MAILBOX_START_COMMAND 0xda + +/* Version of EC protocol */ +#define EC_MAILBOX_PROTO_VERSION 3 + +/* Number of header bytes to be counted as data bytes */ +#define EC_MAILBOX_DATA_EXTRA 2 + +/* Maximum timeout */ +#define EC_MAILBOX_TIMEOUT HZ + +/* EC response flags */ +#define EC_CMDR_DATA BIT(0) /* Data ready for host to read */ +#define EC_CMDR_PENDING BIT(1) /* Write pending to EC */ +#define EC_CMDR_BUSY BIT(2) /* EC is busy processing a command */ +#define EC_CMDR_CMD BIT(3) /* Last host write was a command */ + +/** + * wilco_ec_response_timed_out() - Wait for EC response. + * @ec: EC device. + * + * Return: true if EC timed out, false if EC did not time out. + */ +static bool wilco_ec_response_timed_out(struct wilco_ec_device *ec) +{ + unsigned long timeout = jiffies + EC_MAILBOX_TIMEOUT; + + do { + if (!(inb(ec->io_command->start) & + (EC_CMDR_PENDING | EC_CMDR_BUSY))) + return false; + usleep_range(100, 200); + } while (time_before(jiffies, timeout)); + + return true; +} + +/** + * wilco_ec_checksum() - Compute 8-bit checksum over data range. + * @data: Data to checksum. + * @size: Number of bytes to checksum. + * + * Return: 8-bit checksum of provided data. + */ +static u8 wilco_ec_checksum(const void *data, size_t size) +{ + u8 *data_bytes = (u8 *)data; + u8 checksum = 0; + size_t i; + + for (i = 0; i < size; i++) + checksum += data_bytes[i]; + + return checksum; +} + +/** + * wilco_ec_prepare() - Prepare the request structure for the EC. + * @msg: EC message with request information. + * @rq: EC request structure to fill. + */ +static void wilco_ec_prepare(struct wilco_ec_message *msg, + struct wilco_ec_request *rq) +{ + memset(rq, 0, sizeof(*rq)); + rq->struct_version = EC_MAILBOX_PROTO_VERSION; + rq->mailbox_id = msg->type; + rq->mailbox_version = EC_MAILBOX_VERSION; + rq->data_size = msg->request_size; + + /* Checksum header and data */ + rq->checksum = wilco_ec_checksum(rq, sizeof(*rq)); + rq->checksum += wilco_ec_checksum(msg->request_data, msg->request_size); + rq->checksum = -rq->checksum; +} + +/** + * wilco_ec_transfer() - Perform actual data transfer. + * @ec: EC device. + * @msg: EC message data for request and response. + * @rq: Filled in request structure + * + * Context: ec->mailbox_lock should be held while using this function. + * Return: number of bytes received or negative error code on failure. + */ +static int wilco_ec_transfer(struct wilco_ec_device *ec, + struct wilco_ec_message *msg, + struct wilco_ec_request *rq) +{ + struct wilco_ec_response *rs; + u8 checksum; + u8 flag; + + /* Write request header, then data */ + cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, 0, sizeof(*rq), (u8 *)rq); + cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, sizeof(*rq), msg->request_size, + msg->request_data); + + /* Start the command */ + outb(EC_MAILBOX_START_COMMAND, ec->io_command->start); + + /* For some commands (eg shutdown) the EC will not respond, that's OK */ + if (msg->flags & WILCO_EC_FLAG_NO_RESPONSE) { + dev_dbg(ec->dev, "EC does not respond to this command\n"); + return 0; + } + + /* Wait for it to complete */ + if (wilco_ec_response_timed_out(ec)) { + dev_dbg(ec->dev, "response timed out\n"); + return -ETIMEDOUT; + } + + /* Check result */ + flag = inb(ec->io_data->start); + if (flag) { + dev_dbg(ec->dev, "bad response: 0x%02x\n", flag); + return -EIO; + } + + /* Read back response */ + rs = ec->data_buffer; + checksum = cros_ec_lpc_io_bytes_mec(MEC_IO_READ, 0, + sizeof(*rs) + EC_MAILBOX_DATA_SIZE, + (u8 *)rs); + if (checksum) { + dev_dbg(ec->dev, "bad packet checksum 0x%02x\n", rs->checksum); + return -EBADMSG; + } + + if (rs->result) { + dev_dbg(ec->dev, "EC reported failure: 0x%02x\n", rs->result); + return -EBADMSG; + } + + if (rs->data_size != EC_MAILBOX_DATA_SIZE) { + dev_dbg(ec->dev, "unexpected packet size (%u != %u)\n", + rs->data_size, EC_MAILBOX_DATA_SIZE); + return -EMSGSIZE; + } + + if (rs->data_size < msg->response_size) { + dev_dbg(ec->dev, "EC didn't return enough data (%u < %zu)\n", + rs->data_size, msg->response_size); + return -EMSGSIZE; + } + + memcpy(msg->response_data, rs->data, msg->response_size); + + return rs->data_size; +} + +/** + * wilco_ec_mailbox() - Send EC request and receive EC response. + * @ec: EC device. + * @msg: EC message data for request and response. + * + * On entry msg->type, msg->request_size, and msg->request_data should all be + * filled in. If desired, msg->flags can be set. + * + * If a response is expected, msg->response_size should be set, and + * msg->response_data should point to a buffer with enough space. On exit + * msg->response_data will be filled. + * + * Return: number of bytes received or negative error code on failure. + */ +int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg) +{ + struct wilco_ec_request *rq; + int ret; + + dev_dbg(ec->dev, "type=%04x flags=%02x rslen=%zu rqlen=%zu\n", + msg->type, msg->flags, msg->response_size, msg->request_size); + + mutex_lock(&ec->mailbox_lock); + /* Prepare request packet */ + rq = ec->data_buffer; + wilco_ec_prepare(msg, rq); + + ret = wilco_ec_transfer(ec, msg, rq); + mutex_unlock(&ec->mailbox_lock); + + return ret; + +} +EXPORT_SYMBOL_GPL(wilco_ec_mailbox); -- cgit v1.2.3